\Windows\system32\config\system MISSING file of repair

Similar Questions

• windows\system32\config\system missing or corrupted display.

  I was remove two conflicting security, CA & Ad-Aware programs.  Everything worked great until I rebooted.  Then the black the Windows\system32\config\system missing or damaged screen appeared.  Is there a way to recover my data and restore my computer without the disk restor?

  Provide information on your system, the better you can:

  What is your system brand and model?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  If the system works, what do you think might have changed since the last time it did not work properly?

  Let me start with this: (never start with KB307545)

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Windows\System32\Config\System missing

  My computer does not start. It gives a message that A S.M.A.R.T. error was encountered. I tried to restore using a previous restore point. When he tried to restart, he went to a black screen with a message that says "windows\system32\config\system is missing or damaged. It will allow me to use my original disk either repair or reinstall windows. Repair running gives me a C: prompt but I can not find the file, I need to replace the old corrupt one. Is there a fix for this issue before reinstalling windows?

  the error message is basically stating that the registry is missing that could simply be the result of becoming not indexed by the mft.

   

  If my suggestion is that you run the following commands on the c line, >:

   

  Chkdsk /r

  Fixboot

   

  then exit, remove the cd and restart the computer.

   

  
  --
  db·´¯`·...¸><)))º>

  .

  "Talisynn" wrote in message news: c874669e-98ec-48dc-aad0-85cffaef91d2...

  My computer does not start. It gives a message that A S.M.A.R.T. error was encountered. I tried to restore using a previous restore point. When he tried to restart, he went to a black screen with a message that says "windows\system32\config\system is missing or damaged. It will allow me to use my original disk either repair or reinstall windows. Repair running gives me a C: prompt but I can not find the file, I need to replace the old corrupt one. Is there a fix for this issue before reinstalling windows?

  DB·´¯'·.. ¸ >-))) º > ·´¯'·.. ¸ >-))) º > share nirvana mann

• Re-install Windows XP Pro: Windows will not start - WINDOWS/system32/config/SYSTEM missing or damaged

  Windows tells me to run the install from the original CD, and then to enter the 'r' to repair the problem. I never get: Windows reboots repeatedly, or it crashes just without giving me the chance to enter the 'r '.  A Windows XP Pro with SP3 iso file did not help; not more than another copy of a Windows XP Pro with SP2 CD. What should I do now? How can I systematically enter the Windows installation, and how can I do a repair installation?

  Yaaakov Kayman, retired engineer-programmer/software system (for the most-mainframe)

  http://support.Microsoft.com/kb/311755

  read the above for asms file missing

  ==========

  also please note that you can not do a repair install on xp sp3 with a cd of xp sp2.

  It must be a cd with sp3 slipstreamed CD.

  =====

  If you can get into your bios default and the cd to start everything first and try again, what happens this time?

  In addition, clean the cd by wiping gently from the Center to the edge, NOT in a circle, with a soft cloth wet litely.

  your cd can have a streak that gives you the error.

  =========

  It can also be your player, you have a tower with two drives? If so pass out them and see if the problem occurs.

• "\WINDOWS\SYSTEM32\CONFIG\SYSTEM missing or corrupted" when starting the computer.

  Where do you live? You have any ideas on how to fix it?

  Larry

  Why can't I install Windows XP on a new hard drive in my computer?

  I need HELP!

  Larry

• Windows system32\config\system file corrupt / missing

  I have Windows XP Home edition on my Sony Vaio. Cannot start Windows because I get a msg saying following file is damaged or missing windows system32\config\system
  Sony support suggested I start mode F8 and select know last good configuration. I tried and got a msg saying that Windows could not start because the following file is missing or damaged
  \SYSTEM32\NTOSKRNL.exe
  Sony support is now suggesting a full recovery, but I don't want to lose all my data!  Any suggestions on what I can do to fix it, but also, let me keep my data?  Thank you!!

  
  Corrupt des/windows system32\config\system missing file? How to fix without losing my data? Support Sony says full recovery of the system, but I'll lose data and sounds very drastic!

  e star,
  For your Windows CD, which would have been provided by the PC manufacturer.  Sometimes they have a partition on the hard disk that contains the recovery software and can be viewed during the start up.  You should check with the manufacturer of PC for more information about the recovery options.  Also if they did not provide a CD sometimes they offer the recovery media for sale.

  The problem here is that something has happened to the ntoskrnl.exe file.  It is difficult to replace just this file because the version that's on a CD may be different for the version that you had on your system.  If replace you it with another that it could potentially cause other problems.

  At this point, you will need to do a repair install or restore clean install\factory.  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error: "Windows XP didn't start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM"

  Original title: windows xp, do not load until 08/06/11

  Windows xp2 would not start. I have windows xp on another hard drive but I am unable to see my media files, it shows only a few programs when I check the properties, it shows that 37% of the hard drive is used it is a 40gig drive, how do I get my wma filesand other files? problems on the main drive began when the current was until windows has been completely closed down.the hard drive is almost full ive been impossible to record data due a bad cd Writer.whilst in the recovery console a message came with \windows\system32\config\system missing I don't know where to find and replace this file on xp cd

  Thanks derek

  Hi Derek,.
   
  For the hard disk with the error message, try the steps mentioned in the article given below to resolve this issue:
  How do I recover from a corrupted registry that prevents Windows XP startup
  
  Warning Do not use the procedure that is described in this article if your computer has an OEM operating system. The hive system on OEM installations creates passwords and user accounts that did not exist previously. If you use the procedure that is described in this article, you may not be able to log in the recovery console to restore the original registry hives.
   
  For problems with media files, I suggest you to start a new thread and provide all the necessary information to help us help you better.

• Windows\System32\Config\System is corrupted or missing error

  system32 error
  my ex is to get the windows\system32\config\system missing or damaged error. Unfortunately, she only has more his original cd, can I download a boot disk or recovery disk or whatever it is? The computer won't past this screen. As a side note, I have a student XP Pro installation disc, but it will not even read that.

  Maybe someday the dialog box 'ask a question' forums XP will ask these questions automatically when a new thread is started so I don't have to ask every time.  It might even be possible to solve a problem in a single response when enough information is provided.

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  If the system works, what do you think might have changed since the last time it did not work properly?

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).

  These can cause corruption in the file system that must be fixed before you do anything else.

  If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  There is zero logic to begin to try to begin to try to modify or copy files to a hard drive that has a corrupted file system, so this must first be fixed using the XP chkdsk program and run chkdsk on your hard drives may solve your problem completely.

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Windows\System32\Config\System is corrupted or missing 0xc00000e9

  original title: 0xc00000e9

  OK, I have an ibm think purchased cushion of opportunity he has been cleared, then reformatted with windows xp professional, he crashed hard last week then my son he has reinstalled with windows vista Home premium, that it crashed yesterday with this message that is damaged or missing. I do not have the disk that came with it to restart and everytime I try to do, he comes back and says windows\system32\config\system missing or coruppted is there a way I can down load a free disk and burn it to a recordable disc?

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Unable to start my laptop due to c:\windows\system32\config\system

  Unable to start my laptop due to c:\windows\system32\config\system missing or damaged

  Hello

  ·        Remember to make changes to the system?

  I suggest you to follow the steps mentioned in the article below and let us know if the problem is solved or not.

  How do I recover from a corrupted registry that prevents Windows XP startup

  http://support.Microsoft.com/kb/307545

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Startup error - file is missing or corrupt: windows\system32\config\system

  When I turn on my computer, I get the following error message:

  Windows could not start because the following gile is missing or damaged:
  Windows\System32\Config\System
  You can try to repair this file by starting Windows Setup using the original Setup CD.
  Select the rat the first screen to start repair.

  I can't solve this problem because I do not understand what to do.
  First of all, I put in the recovery CD Toshiba to installation and then I turned on the computer.
  When the Toshiba screen came on I pressed r
  Nothing happened and I was returned to the original error message

  Secondly, I tried holding down c when I turned on the computer because that's what cd said to
  The CD loaded and brought me to a screen that asked me if I had backed up all my files
  I've supported them all upward, only some, because previously there was no problem with the computer and I don't think I have it will re-start.
  I hit not and so I do not know what to do next.

  I can lose everything on my computer, otherwise I'd just re - load windows. What should I do?

  Is anyway for me to back up my documents and then reload everything, or is there a way for me to fix the entire system without erasing it?

  Thanks for your help
  Josh

  I agree with kody. You can try to fix it using windows advanced option menu. Maybe you can also try to repair Windows by using the recovery console. Problem is that this option can be used with Microsoft WXP CD facilities and not with supplied recovery media.

  http://helpdesk.its.uiowa.edu/Windows/instructions/repairinstall.htm

• My pc says that windows does not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM.

  My pc says that windows does not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM. It is said it can be repaired by using the original installation CD, but we do not have. Any ideas please?

  The file is missing or corrupt is one of your files in the system registry.

  By far, the best way to recover from this is to go to another computer and create a free Hirens Boot CD.
  Download Hirens: <> http://www.hirensbootcd.org/download/ > (link at the bottom of the icon of the disk)
  Hirens CD burning <> http://www.hirensbootcd.org/burning/ >

  Once you create the CD, and then start your system of problem with this CD.  In the first window, select "Mini Windows XP" and wait for the system to start.  When it starts, go to the Hirens Boot CD menu and select
  Register-> Registry Restore Wizard.
  then follow the prompts.  This wizard will return a copy of your registry database from backups that are stored with your system restore points.  After the restoration, stop, remove the CD and restart.

  When you start your system, it is recommended to perform a system restore operation to ensure the consistency of your system
  "How to restore Windows XP to a previous state"
     <>http://support.Microsoft.com/kb/306084 >

  Also, this error is almost always accompanied, if not caused, the corruption of the file system.  Also a good idea to perform a check disk (chkdsk) operation with the option "repair".
  "How to perform disk error in Windows XP check"
     <>http://support.Microsoft.com/kb/315265 >

  The hard way to get back is covered in the following Microsoft KB article, but if you have installed a large number of service packs for your installation of XP, I don't give you many chances to get past part 1. (And there's also an installation CD to access the Recovery Console)

  "How do I recover from a corrupted registry that prevents Windows XP boot"
    <>http://support.Microsoft.com/kb/307545 >

  HTH,
  JW

• HP mini 110-1129nr with windows xp home edition, following the file is missing or corrupt \windows\system32\config\system model doesn't have a cd/dvd drive. Help, please!

  HP mini 110-1129nr with windows xp home edition, on said boot computer could not start because the following file is missing or corrupt \windows\system32\config\system computer has no cd/dvd drive. Computer does not load in safe mode, I ran disk hard main test self test it says completion test: failure, check the status: 7 (filled with the read element of the test failed). Help.

  You need an external DVD drive to get the repair will.

  Also the device you own does not seem to have built in the recovery partition. I'm not sure about later versions of this machine, however, it is best to check with HP.

  The problem is that there is a corruption of the registry on your OS or the system could not find where the registry files are due to system files or boot corrupted file.

  A repair can be made with an external DVD, the worst case, is that if the repair doesn't work you reinstall Windows.

  See this page from HP

• Windows didn't start because the following file is missing/windows/system32/config/system Windows XP

  Original title: repair/restore of windows?, a little confused?

  My brother has problems with his computer. It happens that windows didn't start because the following file is missing/windows/system32/config/system. I need to know how to do this, but for some time.

  On the sites, some say not to use get it back? (is that right?) Here's what they say. He has not brought his xp disk, I tried an iso online but lacks the EULA. I have a windows xp update here somewhere, thatt allow me to fix his system?
  I basically have to hit enter then press R? Thank you

  1. Press Enter to start the configuration of Windows.

     do not choose "to repair an installation of Windows XP using the Recovery Console, press on R", (do not want to load the Recovery Console). I repeat, do not choose "to repair an installation of Windows XP using the Recovery Console, press on R.

  2. Accept the license agreement and Windows will search for existing installations of Windows.
  3. Select the XP installation you want to repair in the list, press Rto start the repair. If the repair is not one of the options, END of installation

  Hello

  You can try the troubleshooting provided in the link below steps to fix the problem.

  How do I recover from a corrupted registry that prevents Windows XP startup

  http://support.Microsoft.com/kb/307545

  Note:

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

• Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

  System:

  Toshiba Satellite A-75

  WIndows XP Home Edition
  Fully updated with Svc Pk 3
  HITACHI Travelstar hard drive 80 gig

  Nice day

  I'm getting this ' file is missing or damaged:------WINDOWS-SYSTEM32-CONFIG-SYSTEM ' error and Windows does not start in the F8 boot options. When I disable the auto reboot, I get a BSOD 51 registry error, consistent with the file "missing or corrupt" error Surprisingly "Recovery Console" works so I used to run chkdsk. This has not solved the problem, but even once, surprisingly, the utility reported no fixed error. Ok. I do research online (using another computer of course) and check out the many tips that I copy some files in my "c:\windows\repair" folder in the folder 'system '. Before I had time to do that, however, I found an article from Microsoft stating that this should not be done if you have an OEM System... what I'm doing. Apparently, hives system on these OEM installed OS set other passwords that can permanently block you on your records if you use this method. Thanks for the warning. My system restore disc is nothing more than a tool of re-insall OS that will wipe all my data in the process, and this is not desirable. Currently, I see again all my data on the drive by using the "recovery console". I'm ready to thread the needle on this one in the hope of re - access the operating system, although in some limited capacity. Any help would be greatly appreciated.

  When you run chkdsk in RC, did you use the /r switch? This is the key! In other words, this should be the command:

  Chkdsk /r

  (there is a space before the slash)

  Moreover, KB307545 can be run safely on most OEM XP installations. Of course, nothing is guaranteed 100%.

  Before you do this or else, you really must ensure all data is stored safely. One way to do this is to start on a live Linux CD and then copy the files to an external hard drive. Another way is to connect the problem hard drive into a working PC and copy the files in this way. This could be done by the servo drive or with an adapter like this:

  http://www.Newegg.com/product/product.aspx?item=N82E16812161002&TPK=N82E16812161002