windows\system32\config\system missing or corrupted display.

I was remove two conflicting security, CA & Ad-Aware programs.  Everything worked great until I rebooted.  Then the black the Windows\system32\config\system missing or damaged screen appeared.  Is there a way to recover my data and restore my computer without the disk restor?

Provide information on your system, the better you can:

What is your system brand and model?

Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

The afflicted system has a CD/DVD drive work?

If the system works, what do you think might have changed since the last time it did not work properly?

Let me start with this: (never start with KB307545)

If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

This is not the same as recovery disks that might have come with the acquisition of the system store.

You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

The ISO bootable image file you need to download is called:

xp_rec_con. ISO

Download the ISO from here:

http://www.mediafire.com/?ueyyzfymmig

Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

http://www.ImgBurn.com/

Here are some instructions for ImgBurn:

http://Forum.ImgBurn.com/index.php?showtopic=61

It would be a good idea to test your bootable CD on a computer running.

You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

When you start on the CD, follow the instructions:

Press any key to boot from CD...

Installing Windows... going to pronounce.

Press 'R' to enter the Recovery Console.

Select the installation that you want to access (usually 1: C:\WINDOWS)

You may be asked to enter the password (usually empty).

You should be in the folder C:\WINDOWS.  It's the same as the

C:\Windows folder that you see in Solution Explorer.

The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

Assuming your boot drive is C, run the following command:

CHKDSK C: /r

Let chkdsk finish to correct the problems, he could find.

It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

You must run chkdsk/r again until it finds no error to correct.

Remove the CD, and then type "exit" to exit the RC and restart the computer.

You have not to set the BIOS to boot the disk HARD since the CD won't be.

Tags: Windows

Similar Questions

  • "\WINDOWS\SYSTEM32\CONFIG\SYSTEM missing or corrupted" when starting the computer.

    Where do you live? You have any ideas on how to fix it?

    Larry

    Why can't I install Windows XP on a new hard drive in my computer?

    I need HELP!

    Larry

  • \Windows\system32\config\system MISSING file of repair

    I have a T400 who HAD an XP Pro operating system... Google chrome has frozen the system and I did a hard reboot and the computer had lost the configuration of the registry file. Microsoft recommends that the oem disc should be used, instead of a commercial version of the operating system. It's my DISLIKE for the purchase of a laptop computer with the OEM software, without a backup disk. If there is a problem, the manufacturer generally is going to drag you dry. I thought that this stratagem of Toshiba, but not of Lenovo. Hell, you can't even ask 'em to a disk if you are out of warranty. Stone wall. Why is it not possible to ask even an OEM Lenovo restore disk? Unless you have the security privileges, there is no way to even ask a repair disc: repair file \windows\system32\config\system MISSING this thread has addressed the topic of config file missing and from the looks of it nothing of this worked when even though the guy has abandoned and performed a clean installation and lost three days : http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/How-to-repair-corrupt-windows-system32-c... This is not the problem of problems it's despair. I have a lot of files on that drive the need for recovery. I just want to get some tips on how to record what I have and do not go the trouble to reinstall my entire library of software and then having to reinvent my lost files. Ridiculous. Where there is an article on what works?


  • Got an error message that says C:/WINDOWS/SYSTEM32/CONFIG/SYSTEM has been corrupted

    I've recently updated to WINDOWS XP Pro SP3.  Thursday morning, when I tried to boot my pc, I got an error message that says C:/WINDOWS/SYSTEM32/CONFIG/SYSTEM has been corrupted.  I've ever seen at the windows startup screen.  What can I do?

    * original title - I got an error message that says C:/WINDOWS/SYSTEM32/CONFIG/SYSTEM has been corrupted. What can I do? *

    System 32 system config is missing or currupt

    How to recover a corrupted registry that prevents Windows XP startup
    http://support.Microsoft.com/kb/307545

    Install and use the Recovery Console in Windows XP
    http://support.Microsoft.com/kb/307654

    See also

    How to Troubleshoot Registry Corruption issues
    http://support.Microsoft.com/kb/822705

    How to fix a missing or corrupt Windows\System32\Config\System file
    http://xphelpandsupport.MVPs.org/how_do_i_repair_a_missing_or_cor1.htm

    Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

  • Windows\System32\Config\System missing

    My computer does not start. It gives a message that A S.M.A.R.T. error was encountered. I tried to restore using a previous restore point. When he tried to restart, he went to a black screen with a message that says "windows\system32\config\system is missing or damaged. It will allow me to use my original disk either repair or reinstall windows. Repair running gives me a C: prompt but I can not find the file, I need to replace the old corrupt one. Is there a fix for this issue before reinstalling windows?

    the error message is basically stating that the registry is missing that could simply be the result of becoming not indexed by the mft.
     
    If my suggestion is that you run the following commands on the c line, >:
     
    Chkdsk /r
    Fixboot
     
    then exit, remove the cd and restart the computer.
     

    --
    db·´¯`·...¸><)))º>

    .

    "Talisynn" wrote in message news: c874669e-98ec-48dc-aad0-85cffaef91d2...
    My computer does not start. It gives a message that A S.M.A.R.T. error was encountered. I tried to restore using a previous restore point. When he tried to restart, he went to a black screen with a message that says "windows\system32\config\system is missing or damaged. It will allow me to use my original disk either repair or reinstall windows. Repair running gives me a C: prompt but I can not find the file, I need to replace the old corrupt one. Is there a fix for this issue before reinstalling windows?

    DB·´¯'·.. ¸ >-))) º > ·´¯'·.. ¸ >-))) º > share nirvana mann

  • Re-install Windows XP Pro: Windows will not start - WINDOWS/system32/config/SYSTEM missing or damaged

    Windows tells me to run the install from the original CD, and then to enter the 'r' to repair the problem. I never get: Windows reboots repeatedly, or it crashes just without giving me the chance to enter the 'r '.  A Windows XP Pro with SP3 iso file did not help; not more than another copy of a Windows XP Pro with SP2 CD. What should I do now? How can I systematically enter the Windows installation, and how can I do a repair installation?

    Yaaakov Kayman, retired engineer-programmer/software system (for the most-mainframe)

    http://support.Microsoft.com/kb/311755

    read the above for asms file missing

    ==========

    also please note that you can not do a repair install on xp sp3 with a cd of xp sp2.

    It must be a cd with sp3 slipstreamed CD.

    =====

    If you can get into your bios default and the cd to start everything first and try again, what happens this time?

    In addition, clean the cd by wiping gently from the Center to the edge, NOT in a circle, with a soft cloth wet litely.

    your cd can have a streak that gives you the error.

    =========

    It can also be your player, you have a tower with two drives? If so pass out them and see if the problem occurs.

  • Error: "Windows XP didn't start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM"

    Original title: windows xp, do not load until 08/06/11

    Windows xp2 would not start. I have windows xp on another hard drive but I am unable to see my media files, it shows only a few programs when I check the properties, it shows that 37% of the hard drive is used it is a 40gig drive, how do I get my wma filesand other files? problems on the main drive began when the current was until windows has been completely closed down.the hard drive is almost full ive been impossible to record data due a bad cd Writer.whilst in the recovery console a message came with \windows\system32\config\system missing I don't know where to find and replace this file on xp cd

    Thanks derek

    Hi Derek,.
     
    For the hard disk with the error message, try the steps mentioned in the article given below to resolve this issue:

    Warning Do not use the procedure that is described in this article if your computer has an OEM operating system. The hive system on OEM installations creates passwords and user accounts that did not exist previously. If you use the procedure that is described in this article, you may not be able to log in the recovery console to restore the original registry hives.
     
    For problems with media files, I suggest you to start a new thread and provide all the necessary information to help us help you better.
  • Windows\System32\Config\System is corrupted or missing error

    system32 error
    my ex is to get the windows\system32\config\system missing or damaged error. Unfortunately, she only has more his original cd, can I download a boot disk or recovery disk or whatever it is? The computer won't past this screen. As a side note, I have a student XP Pro installation disc, but it will not even read that.

    Maybe someday the dialog box 'ask a question' forums XP will ask these questions automatically when a new thread is started so I don't have to ask every time.  It might even be possible to solve a problem in a single response when enough information is provided.

    Please provide additional information on your system:

    What is your system brand and model?

    What is your Version of XP and the Service Pack?

    Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

    The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

    The afflicted system has a CD/DVD drive work?

    If the system works, what do you think might have changed since the last time it did not work properly?

    The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).

    These can cause corruption in the file system that must be fixed before you do anything else.

    If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

    There is zero logic to begin to try to begin to try to modify or copy files to a hard drive that has a corrupted file system, so this must first be fixed using the XP chkdsk program and run chkdsk on your hard drives may solve your problem completely.

    Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

    Boot into the Recovery Console Windows using an XP bootable installation CD.

    If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

    This is not the same as recovery disks that may have come to a store to purchase the system.

    You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

    The ISO bootable image file you need to download is called:

    xp_rec_con. ISO

    Download the ISO from here:

    http://www.mediafire.com/?ueyyzfymmig

    Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

    http://www.ImgBurn.com/

    Here are some instructions for ImgBurn:

    http://Forum.ImgBurn.com/index.php?showtopic=61

    It would be a good idea to test your bootable CD on a computer running.

    You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

    When you start on the CD, follow the instructions:

    Press any key to boot from CD...

    Installing Windows... going to pronounce.

    Press 'R' to enter the Recovery Console.

    Select the installation that you want to access (usually 1: C:\WINDOWS)

    You may be asked to enter the password (usually empty).

    You should be in the folder C:\WINDOWS.  It's the same as the

    C:\Windows folder that you see in Solution Explorer.

    The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

    For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

    A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

    In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

    Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

    Assuming your boot drive is C, run the following command:

    CHKDSK C: /r

    Let chkdsk finish to correct the problems, he could find.

    It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

    You must run chkdsk/r again until it finds no error to correct.

    Remove the CD, and then type "exit" to exit the RC and restart the computer.

    You have not to set the BIOS to boot the disk HARD since the CD won't be.

  • Windows system32\config\system file corrupt / missing

    I have Windows XP Home edition on my Sony Vaio. Cannot start Windows because I get a msg saying following file is damaged or missing windows system32\config\system
    Sony support suggested I start mode F8 and select know last good configuration. I tried and got a msg saying that Windows could not start because the following file is missing or damaged
    \SYSTEM32\NTOSKRNL.exe
    Sony support is now suggesting a full recovery, but I don't want to lose all my data!  Any suggestions on what I can do to fix it, but also, let me keep my data?  Thank you!!


    Corrupt des/windows system32\config\system missing file? How to fix without losing my data? Support Sony says full recovery of the system, but I'll lose data and sounds very drastic!

    e star,
    For your Windows CD, which would have been provided by the PC manufacturer.  Sometimes they have a partition on the hard disk that contains the recovery software and can be viewed during the start up.  You should check with the manufacturer of PC for more information about the recovery options.  Also if they did not provide a CD sometimes they offer the recovery media for sale.

    The problem here is that something has happened to the ntoskrnl.exe file.  It is difficult to replace just this file because the version that's on a CD may be different for the version that you had on your system.  If replace you it with another that it could potentially cause other problems.

    At this point, you will need to do a repair install or restore clean install\factory.  Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows\System32\Config\System is corrupted or missing 0xc00000e9

    original title: 0xc00000e9

    OK, I have an ibm think purchased cushion of opportunity he has been cleared, then reformatted with windows xp professional, he crashed hard last week then my son he has reinstalled with windows vista Home premium, that it crashed yesterday with this message that is damaged or missing. I do not have the disk that came with it to restart and everytime I try to do, he comes back and says windows\system32\config\system missing or coruppted is there a way I can down load a free disk and burn it to a recordable disc?

    There is no Vista free download legal available.

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
    A good Vista DVD contains all versions of Vista.
    The product key determines which version of Vista is installed.

    There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

    If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    http://support.Microsoft.com/default.aspx/KB/918884

    MS advice on the conduct of clean install.

    http://www.theeldergeekvista.com/vista_clean_installation.htm

    A tutorial on the use of a clean install

    http://www.winsupersite.com/showcase/winvista_install_03.asp

    Super Guide Windows Vista Installation

    After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

    See you soon.

    Mick Murphy - Microsoft partner

  • Unable to start my laptop due to c:\windows\system32\config\system

    Unable to start my laptop due to c:\windows\system32\config\system missing or damaged

    Hello

    ·        Remember to make changes to the system?

    I suggest you to follow the steps mentioned in the article below and let us know if the problem is solved or not.

    How do I recover from a corrupted registry that prevents Windows XP startup

    http://support.Microsoft.com/kb/307545

    Thanks and regards.

    Thahaseena M
    Microsoft Answers Support Engineer.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows\System32\Config\System is corrupted or missing

    I restarted Windows XP Home edition using the software/operating system installation CD.
    I deleted everything and started again and when the Setup is finished, she has restarted.
    Then the message "windows\system32\config\system is corrupted or missing" came and said it should be repaired in the recovery console.

    Boot from the Windows XP CD and go to Recovery Console - follow this document to do http://support.microsoft.com/kb/307654

    Go to the command prompt.

    Then change to the C: by typing C: and press ENTER.

    Then type CD\SYSTEM VOLUME INFORMATION and press enter

    Then type DIR /AH and press enter (this will show you a directories even if they are hidden directories)

    This will show a few directories... one in particular starts with the name of directory being _RESTORE {there is a long series of random letters and it ends by}

    Type CD _restore {then the random set of letters, dashes and numbers in the directory list of the above command and ending by the}, and then press ENTER.

    Then type dir and press to enter.

    It will show you a bunch of directories that begin with RP - something like RP1366.

    Look at the last entry in directory PR.  If IE RP1366... then look for a couple of directory entries...

    Type CD RP1364 to some directory of restore point that is relevant to your directory entry.  Just don't do the last restore point directory - I would go back 2 or 3 directories restore point.

    Then type DIR /AD and press enter

    Should display a directory called SNAPSHOT

    Then type CD SNAPSHOT

    Then type DIR and press enter

    You should see a few files but two in particular.

    _REGISTRY_MACHINE_SYSTEM
    _REGISTRY_MACHINE_SOFTWARE

    Type COPY _REGISTRY_MACHINE_SYSTEM C:\windows\system32\config\system and press enter
    Then type COPY _REGISTRY_MACHINE_SOFTWARE c:\windows\system32\config\software and press enter

    Then restart your PC and see if you can connect.

  • file missing or corrupt windows\system32\config\system

    HELP - by on the title I did: -.

    The full, first part, follow these steps:

    1. Insert the diskette of starting Windows XP in the floppy drive, or insert the Windows XP CD into the CD-ROM drive and restart the computer.
      Click to select all of the options required to start the computer from the CD-ROM drive if you are prompted to do so.
    2. When the "Welcome" screen appears, press R to start the Recovery Console.
    3. If you have a dual-boot or multiboot, select the installation that you want to access from the Recovery Console.
    4. When you are prompted to do so, type the administrator password. If the administrator password is blank, just press ENTER.
    5. At the Recovery Console prompt, type the following lines, pressing ENTER after you type each line:
      MD tmp
      copy c:\windows\system32\config\system c:\windows\tmp\system.bak
      copy c:\windows\system32\config\software c:\windows\tmp\software.bak
      Copy c:\windows\system32\config\sam c:\windows\tmp\sam.bak
      copy c:\windows\system32\config\security c:\windows\tmp\security.bak
      copy c:\windows\system32\config\default c:\windows\tmp\default.bak

      delete c:\windows\system32\config\system
      delete c:\windows\system32\config\software
      Delete c:\windows\system32\config\sam
      delete c:\windows\system32\config\security
      Delete c:\windows\system32\config\default

      Copy c:\windows\repair\system c:\windows\system32\config\system
      copy c:\windows\repair\software c:\windows\system32\config\software
      copy c:\windows\repair\sam c:\windows\system32\config\sam
      Copy c:\windows\repair\security c:\windows\system32\config\security
      Copy c:\windows\repair\default c:\windows\system32\config\default

    6. Type exit to quit the Recovery Console. Your computer will restart.

    Note This procedure assumes that Windows XP is installed in the C:\Windows folder. Make sure that replace C:\Windows with the appropriate dossier_Windows if it is a different place.

    If you have access to another computer, to save time, you can copy the text in step 5, and then create a text file called "Regcopy1.txt" (for example). To use this file, run the following command when you start in Recovery Console:

    batch regcopy1.txt

    With the command batch to the Recovery Console, you can process all the commands in a text file in the order. When you use thebatch command, you do not have to manually type as many commands.

    Second part

    To perform the procedure described in this section, you must be logged in as administrator or an administrative user (a user who has an account in the Administrators group). If you use Windows XP Home Edition, you can connect as an administrative user. If you sign in as an administrator, you must first start Windows XP Home Edition in safe mode. To start the computer in Windows XP Home Edition in safe mode, follow these steps.

    Note Print these instructions before continuing. You cannot view these instructions after you restart the computer in Mode safe. If you use the NTFS file system, also print the instructions from article KB309531 of the Knowledge Base. Step 7 contains a reference to the article.

    1. Click Start , click shut down (or click turn off computer ), click restart , and then click OK (or click restart ).
    2. Press the F8 key.

      On a computer that is configured to start to multiple operating systems, you can press F8 when you see the boot menu.

    3. Use the arrow keys to select the appropriate safe mode option and press ENTER.
    4. If you have a dual-boot or multiboot system, use the arrow keys to select the installation that you want to access, and then press ENTER.

    In part two, you copy the registry of their location saved files by using the system restore. This folder is not available in the Recovery Console, and is usually not visible on the typical use. Before you begin this procedure, you must change several settings to make the folder visible:

    1. Start Windows Explorer.
    2. On the Tools menu, click folder options .
    3. Click the view tab.
    4. Under hidden files and folders , select Show hidden folders and files , and then click to clear theHide protected (recommended) operating system files check box.
    5. When appears in the dialog box confirming that you want to display these files, click Yes .
    6. Double-click the drive where you installed Windows XP to display the list of folders. If it is important to click on the correct drive.
    7. Open the System Volume Information folder. This folder is not available and is dimmed because it is defined as a file hidden doubling.

      Note This folder contains one or more _restore {GUID} folders such as "_restore {87BD3667-3246-476B-923F-F86E30B3E7F8}.

      Note You may receive the following error message:

      C:\System Volume Information is not accessible. Access is denied.

      If you receive this message, see the following article in the Microsoft Knowledge Base for access to this folder and continue with the procedure:

      309531 (http://support.microsoft.com/kb/309531/) how to access the System Volume Information folder
    8. Open a folder that was created not at the present time. You may need to clickDetails on the view menu to see when these folders were created. There may be one or more folders starting with "RPx under this folder. Here are the restore points.
    9. Open one of these folders to find a subfolder of the snapshot. The following path is an example of a folder path to the snapshot folder:
      C:\System Volume \RP1\Snapshot Information\_restore {D86480E3-73EF-47BC-A0EB-A81BE6EE3ED8}
    10. Starting from the Snapshot folder, copy the following files to the C:\Windows\Tmp folder:
      • _REGISTRY_USER_. DEFAULT
      • _REGISTRY_MACHINE_SECURITY
      • _REGISTRY_MACHINE_SOFTWARE
      • _REGISTRY_MACHINE_SYSTEM
      • _REGISTRY_MACHINE_SAM
    11. Rename the files in the C:\Windows\Tmp folder as follows:
      • Rename _REGISTRY_USER_. DEFAULT DEFAULT
      • Rename _REGISTRY_MACHINE_SECURITY to SECURITY
      • Rename _REGISTRY_MACHINE_SOFTWARE to SOFTWARE
      • Rename _REGISTRY_MACHINE_SYSTEM to SYSTEM
      • Rename _REGISTRY_MACHINE_SAM to SAM

    These files are the system restore registry files. Because you used the registry file that the Setup program created, this registry does not know that these restore points exist and are available. A new folder is created with a new GUID under System Volume Information and a restore point is created that includes a copy of the registry files that were copied during the first part. Therefore, it is important not to use the most recent folder, especially if the time stamp on the folder is the same at the moment.

    The current configuration of the system is not aware of the previous restore points. You must have a previous copy of the registry to a previous restore point to make previous restore available again points.

    The registry files that were copied to the Tmp folder in the C:\Windows folder are moved to ensure the files are available in the Recovery Console. You use these files to replace the registry files currently in the C:\Windows\System32\Config folder. By default, the Recovery Console has limited access to records and cannot copy the files in the File System Volume.

    Note The procedure described in this section assume you are using your computer with the FAT32 file system. For more information on how to access the folder of information system with the NTFS file system Volume, click on the number below to view the article in the Microsoft Knowledge Base:

    309531 (http://support.microsoft.com/kb/309531/) how to access the System Volume Information folder

    Third part

    In part three, you delete the existing registry files, and then copy the system restore registry files to the C:\Windows\System32\Config folder:

    1. Start the Recovery Console.
    2. At the command prompt, type the following lines, pressing ENTER after you type each line:
      del c:\windows\system32\config\sam

      del c:\windows\system32\config\security

      del c:\windows\system32\config\software

      del c:\windows\system32\config\default

      del c:\windows\system32\config\system

      copy c:\windows\tmp\software c:\windows\system32\config\software

      copy c:\windows\tmp\system c:\windows\system32\config\system

    copy c:\windows\tmp\sam c:\windows\system32\config\sam

    Copy c:\windows\tmp\security c:\windows\system32\config\security

    Copy c:\windows\tmp\default c:\windows\system32\config\default

    Note Some of these command lines may be wrapped for readability.

  • Type exit to quit the Recovery Console. Restart the computer.
  • Note This procedure assumes that Windows XP is installed in the C:\Windows folder. Make sure that replace C:\Windows with the appropriate dossier_Windows if it is a different place.

    If you have access to another computer, to save time, you can copy the text in step 2, and then create a text file named "Regcopy2.txt" (for example). To use this file, run the following command when you start in Recovery Console:

    regcopy2.txt batch

    Fourth part

    1. Click Start and then click all programs .
    2. Click on Accessories , then System Tools .
    3. Click System Restore , and then click restore to a previous RestorePoint .

    and now when I go to the fourth part and try to connect, it says I need to activate windows to open a session. If I click on Yes, the computer crashes just in my background image, if I click on no, this Chuck me back to the log in page... What is wrong with this blooming thing

    Please HELP - it took three days of messing around and actually the Ive got nowhere!

    OOOOO... should start here:
    The question was preceded by a loss of power, aborted reboot or abnormal termination? (this includes pulling and buttons power)
    These can cause corruption in the file system that must be fixed before you do anything else.
    If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).
    There is zero logic to start try to copy files to a hard drive that has a corrupted file system, so this must be first using the XP chkdsk program and run chkdsk can solve your problem completely.
    Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.
    Start the Recovery Console Windows using an XP bootable installation CD, or create a bootable XP Recovery CD of Console.
    This is not the same as recovery disks that may have come to a store to purchase the system.  If you don't know what kind of bootable CD, you, do a CD of bootable XP Recovery Console and do not forget.
    After booting into the Recovery Console, you should be in this folder:
    C:\WINDOWS
    For each of your hard disk partitions, you must then run:
    Chkdsk /r
    For example, at the Recovery Console prompt, enter:
    CHKDSK c: /r
    Let chkdsk finish to correct the problems, he could find.  It may take a long time to complete or seem to be 'glued '.  Be patient.  If the HARD drive light flashes, it's something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.
    The chkdsk/r must be completed without error, you may need to run several times until it does.
    Remove the CD and then type "exit" to exit the RC and restart the computer and the report with your progress.

    Do, or do not. There is no test.

    I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

  • My pc says that windows does not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM.

    My pc says that windows does not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM. It is said it can be repaired by using the original installation CD, but we do not have. Any ideas please?

    The file is missing or corrupt is one of your files in the system registry.

    By far, the best way to recover from this is to go to another computer and create a free Hirens Boot CD.
    Download Hirens: <> http://www.hirensbootcd.org/download/ > (link at the bottom of the icon of the disk)
    Hirens CD burning <> http://www.hirensbootcd.org/burning/ >

    Once you create the CD, and then start your system of problem with this CD.  In the first window, select "Mini Windows XP" and wait for the system to start.  When it starts, go to the Hirens Boot CD menu and select
    Register-> Registry Restore Wizard.
    then follow the prompts.  This wizard will return a copy of your registry database from backups that are stored with your system restore points.  After the restoration, stop, remove the CD and restart.

    When you start your system, it is recommended to perform a system restore operation to ensure the consistency of your system
    "How to restore Windows XP to a previous state"
       <>http://support.Microsoft.com/kb/306084 >

    Also, this error is almost always accompanied, if not caused, the corruption of the file system.  Also a good idea to perform a check disk (chkdsk) operation with the option "repair".
    "How to perform disk error in Windows XP check"
       <>http://support.Microsoft.com/kb/315265 >

    The hard way to get back is covered in the following Microsoft KB article, but if you have installed a large number of service packs for your installation of XP, I don't give you many chances to get past part 1. (And there's also an installation CD to access the Recovery Console)

    "How do I recover from a corrupted registry that prevents Windows XP boot"
      <>http://support.Microsoft.com/kb/307545 >

    HTH,
    JW

  • HP mini 110-1129nr with windows xp home edition, following the file is missing or corrupt \windows\system32\config\system model doesn't have a cd/dvd drive. Help, please!

    HP mini 110-1129nr with windows xp home edition, on said boot computer could not start because the following file is missing or corrupt \windows\system32\config\system computer has no cd/dvd drive. Computer does not load in safe mode, I ran disk hard main test self test it says completion test: failure, check the status: 7 (filled with the read element of the test failed). Help.

    You need an external DVD drive to get the repair will.

    Also the device you own does not seem to have built in the recovery partition. I'm not sure about later versions of this machine, however, it is best to check with HP.

    The problem is that there is a corruption of the registry on your OS or the system could not find where the registry files are due to system files or boot corrupted file.

    A repair can be made with an external DVD, the worst case, is that if the repair doesn't work you reinstall Windows.

    See this page from HP

Maybe you are looking for