Windows Task Manager has stopped working

Similar Questions

• I recently started getting this message "Windows Task Manager has stopped working

  I started recently getting this message "Windows Task Manager has stopped working" I tried;

  
  Windows Update
  Restart the computer
  Disabling all non Microsoft products on related Msconfig
  Disk fragmentation
  Malwarebytes
  Full scan of the computer AVG
  Safe Mode by using the command "SFC/scannow".

  And still no solution

  Help would be appreciated

  Ashley

  The blue projection arrested?

  You have reinstalled all Windows updates?

  Do you have updated all the drivers of motherboard?

• "The Windows Task Manager has stopped working" the INSTANT Task Manager opens... process of safe mode does nothing.

  I am running windows 7 64 bit and have encountered a problem. Whenever I have open tasks, any way Manager (msconfig, cntrl shift escape, Ctrl alt del, etc.), task manager opens and white and displays "Windows Task Manager has stopped working". I am increasingly frustrated with the problem. I tried booting in safe mode AND clean boot, but the problem persists. On top of that, the system restore fails whenever I'm trying to do.

  Could you please help me get running again the Task Manager?

  Do you feel the behavior if you log on with a different user account?

  Maybe, try to rename a HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\TaskManager to for example a HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\TaskManager.OLD in the registry. Then try to start the Task Manager again.

• Center Store Update Windows Media Manager has stopped working?

  Lately when I start my computer, I get this error message Windows media Center Store Update Manager has stopped working. Its happens after about 10 or 20 Minutes. At first I didn't think much, but now I noticed that the Media Center window is no longer the recording programs, I have planned. The strange thing is when I go into Windows Media Center display at the request, he says that he record but is not. The error message also appears when I try to update the guide, what happens to about 80%, then the message.

  Here are the details of the error message

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: mcupdate. EXE
  Application version: 6.1.1000.18307
  Application timestamp: 4b15b191
  Fault Module name: KERNEL32.dll
  Fault Module Version: 6.0.6002.18449
  Timestamp of Module error: 4da47967
  Exception code: e0434f4d
  Exception offset: 0003fc 56
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033
  Additional information 1: fd00
  More information 2: ea6f5fe8924aaa756324d57f87834160
  Additional information 3: fd00
  Additional information 4: ea6f5fe8924aaa756324d57f87834160

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409
   
  Can someone tell me what that?

  http://support.Microsoft.com/kb/935685

• Desktop Window Manager has stopped working after loading of updates 12/10/10 MS

  Once the download and installation of updates for Windows 12/10/10 patches, Desktop Window Manager has stopped working.  Event viewer lists under Applications:

  Name: Application
  Source: Application error
  Date: 2010-10-13 09:59:47
  Event ID: 1000
  Task category: (100)
  Level: error
  Keywords: Classic
  User: n/a
  Computer: has
  Description:
  The failing application name: Dwm.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc541
  The failed module name: nvwgf2umx.dll, version: 8.17.12.5922, time stamp: 0x4c5424d5
  Exception code: 0xc0000005
  Offset: 0x000000000007c160
  ID of the process failed: 0xb0c
  Start time of application vulnerabilities: 0x01cb6aefa117a51c
  The failing application path: C:\Windows\system32\Dwm.exe
  Path of the failing module: C:\Windows\system32\nvwgf2umx.dll
  Report ID: e6dfd048-d6e2-11df-9660-00271383b7fe

  The operating system is Win 7 x 64.  Video card is a Gigabyte GTS450OC1 with its latest driver running on an Intel DP55KG MB with 8 GB memory Corsair XMS3.  The system was fully functional and stable immediately before the update.  I don't know which of the 18 patches is in conflict with the nvwgf2umx.dll file.  Device Manager reports no hardware problem with any component.

  In my attempts to solve the problem, I run chkdsk f, sfc/scannow (which have reported no problem) and reloaded the video driver (without uninstall first).   Nothing works so far.  I even tried to defragment the master file with Diskeeper 2010 start time Table Defragger (based on another post, I've found), also without success.

  What is the reference for this?

  This may seem like the thing the more janky to post, but I got the same error several months:

  Problem event name: APPCRASH

  Application name: Dwm.exe

  Application version: 6.1.7600.16385

  Application timestamp: 4a5bc541

  Fault Module name: nvwgf2umx.dll

  Fault Module Version: 9.18.13.1422

  Timestamp of Module error: 51427a 68

  Exception code: c0000005

  Exception offset: 000000000013fe0b

  OS version: 6.1.7601.2.1.0.256.1

  Locale ID: 1033

  Additional information 1: bd9d

  More information 2: bd9dfb84ef7bbf0c089fd3d5f079469b

  Additional information 3: ec39

  Additional information 4: ec39233315f018bea3fd5d4de7e9458f
  And could not cancel the record/re-record the dll it error out on an entry point missing or whatever.
  So what for some reason any worked for me is to rename C:\Windows\System32\nvwgf2umx.dll to nvwgf2umx.dll.bak (all other copies of this file are in the folder DriverStore).
  After that, I ran from an administrator command prompt
  net stop uxsms
  net start uxsms
  
  
  And miraculously all started working again.  I'm running a GTX570 with latest drivers nvidia from Scripture.
  Note: You probably shouldn't be move/rename things in System32 unless you are confident and have your data backed up.  It worked for me, but who knows you.

• Desktop Window Manager has stopped working and was closed

  One of our machines (HP Pavilion dv7 Notebook PC running Windows Vista x 64) will receive the error "Desktop Window Manager has stopped working and was closed" with lots of close error. He reappears (as well as all windows flasher to non-aero, then back to aero) in a few minutes, spends about 5 times per hour.

  I did some research on this and have already taken the following measures without a bit of luck:

  1 run the command chkdsk / SFC scan - nothing found via chkdsk, SFC found some issues fixed, and some, it did not set. Them that it solves not all related to Windows Sidebar, which I do not / does not start.

  2. put updated drivers for ATI Radeon 3200HD - this had a lot of new questions. Installing caused newer drivers ATI catalyst to no longer work with errors during installation and popup errors at startup. After trying several solutions workaround to try to get installed it, I ended up coming back to the driver that came with the laptop, that are properly installed and working without error. I am skeptical of update of this stable driver as a solution to the dwm.exe error.

  3. this problem just started yesterday, that occur with not a lot of changes. Other than updates of windows (I think that .NET framework and a few other updates installed), I replaced NOD32 antivirus with Bitdefender antivirus. The system was stable with bitdefender for about 2 weeks, so I'm not convinced that this program is causing the error.

  4. the event viewer shows the following:

  Failing application Dwm.exe, version 6.0.6002.18005, time stamp 0x49e02696, failed module ntdll.dll, version 6.0.6002.18881, time stamp 0x51da3d16, exception code 0 x 80000003, offset 0x00000000000461f0, process id 0 x 124 error, start the application time 0x01cea0365a457adc.

  Offset, process id and start on time all vary, but there are a lot of these application errors in the viewer all screaming Dwm.exe like the failing application.

  What should be my next course of action?

  You do not receive an error but a caveat. NTStatus results (the set of codes execption used by ntdll - the failed module) begin to 0 for no error, 4 for information (you should never see this), 8 for putting guard and C for error.

  It's your specific error.

  //
  MessageId: STATUS_BREAKPOINT
  //
  MessageText:
  //
  EXCEPTION {}
  Breakpoint
  A breakpoint has been reached.
  //
  #define STATUS_BREAKPOINT ((NTSTATUS) 0x80000003L) / / winnt

  Problem is, you shouldn't have breakpoints. Breakpoints are set by debuggers and stop the execution of the program to the State of the program can be examined. There should be no breakpoints in a retail system. More breakpoints are inserted into memory during execution of the program in a debugger. They tend not to do in the actual file.

  So here are two assumptions, either you have no exit code, IE test code (driver?). Or you have a running program that behaves like a debugger (which is suspect).

  Each of the three towers of programs, services, and drivers in increasing amounts. So restrict the possible culprits.

  Clean boot

  Click Start - all programs - Accessories - run and type

   

  msconfig
  

   

  Then go to the Startup tab uncheck everything. Then go to the Services tab check hide all Microsoft Services and uncheck everything that is left.

   

  Reset. If this resolves your wake problem ½ of services / of startup items until you find that one.

  
  Tip clean boot

  If the above does not help.

  Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx

  Start the program by right-clicking and choosing run as administrator and click on the menu Options - Filter Options and check hide Microsoft entries and disable include the empty slots. Uncheck the box just to the left.

  Reset. If this resolves your wake problem half of the items until you find the one that.

  Safe mode

  If the above does not help.

  Click Start - all programs - Accessories - run and type
   

  msconfig
  

   
  Go to the Startup tab, and then click Start. Reset. Come back here and uncheck the box secure start to return to normal mode.

• continue to spread the message ' desktop window manager has stopped working and was closed ".

  continue to spread the message ' desktop window manager has stopped working and was closed ".

  The office then blinks and I can't use the Aero feature.

  Any correction or known issues?

  Thank you
  in2stocks

  Hello
  It is usually a video driver issue. Would like to know what controller you have and see if the manufacturer has a new driver for Vista.
  Please let us know if that was the issue.

  Mark <> Microsoft Partner

• Desktop Window Manager has stopped working after installing Defender Pro 2012 5 in 1

  Hello

  My father has a Windows Vista. It works very well. Until we installed Defender Pro 2012 5 in 1,

  It was a bit slow... the screen flickers of its lights for a few seconds every 10 minutes, I get this... I already have contact Defender Pro, and they said that it was not their fault.

  Help, please!

  DESKTOP WINDOW MANAGER HAS STOPPED WORKING
  Windows can check online for a solution to the problem

  -> online and are looking for a solution (recommended)
  -> close

  APPCRASH
  Application name: Dwm.exe
  Application version: 6.0.6002.18005
  Application timestamp: 49e02696
  Fault Module name: ntdll.dll
  Fault Module Version: 6.0.6002.18327
  Timestamp of Module error: 4cb74dd3
  Exception code: 80000003
  Exception offset: 0000000000045f00
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033
  Additional information 1: 0fef
  More information 2: 0d8b4b37a0c1e529a7398b6615cc3528
  Additional information 3: f196
  Additional information 4: acf765d48a0657c8822f379a6b5f3b91

  Read our privacy statement:
    http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Sorry to tell you,

  I already solved the problem.

  Just to let you know, I buy the product, because

  I used the free and they don't really work (IN MY OPINION).

  Anyone has this PROBLEM (appcrash)

  Go to start

  Click on Control Panel

  go to appearance and personalization

  Click on appearance color of windows.

  then click on settings in the appearance of progress.

  under the gaze of point for the theme of basic or something like that.

  Want more info on Dwm.exe?

  Click here-> http://www.howtogeek.com/howto/windows-vista/what-is-dwmexe-and-why-is-it-running/

• Adobe Download Manager has stopped working. This is the message I get

  I still use google chrome with my Windows Vista PC. Usually plugin chrome automatically updates the latest version of adobe flash player. Sites, I will say that I have to update and head for the download of adobe. I deselect Mccaffee and then try to download. I have to Save it and then click on run, etc., but the installation stops with a message that "Adobe Download Manager has stopped working" and then another message "I want to report to Microsoft", etc..

  I have

  tried several times to install but I can't. I called Microsoft and they offered the Adobe phone number. (I always use my webrootsecure but I disabled it once to see if it would help the download/install new update of adobe Flash Player, but that did not work either) I don't have all the cover or subscription from Microsoft at the moment, btw.

  (I even know the category in which post this question)

  If Chrome Support/updates being arrested was not involved in your original question of Flash Player, that's what I would have advised you to do.

  Download and run the Flash Player uninstaller program.

  http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html

  Then download and install Flash Player; After unchecking installing Chrome and Google toolbar option:

  http://get.Adobe.com/flashplayer/?promoid=BUIGP

  If the problem persists, you may want to ask in the Forums of community Flash Player:

  http://forums.Adobe.com/community/flashplayer

  See you soon.

• Windows Media Player has stopped working, as well as the sharing of multimedia files

  My husband told me that he has always had difficulty to play the DVD on WMP.  I discovered that it would not play because there was a problem with the audio.  I couldn't find the solution to this problem.  However, we were able to play, burn and rip CDs until what we downloaded Windows SP2 for Vista Home Basic (32 bit), two days ago.  Since then, we have not been able to open the app, and the WMP network sharing Service.  I tried to run the Setup program, but it is said that there is a newer version of WMP and it will not replace or repair.  I wanted to see if I could find a solution to this problem without having to resort to reinstalling Vista or restore to an earlier point.  I also noticed that when the WMP application has been updated July 15 to the new version below, there were times this video Web sites would not play and we would have to restart the computer so that we can read them.  More information on apps not working do not are below:

  Windows Media Player has stopped working

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: wmplayer.exe

  Application version: 11.0.6002.18065

  Application timestamp: 4a5dce03

  Fault Module name: wmp.dll

  Fault Module Version: 11.0.6002.18065

  Timestamp of Module error: 4a5de837

  Exception code: c0000005

  Exception offset: 001ebbee

  OS version: 6.0.6002.2.2.0.768.2

  Locale ID: 1033

  Information additional 1: 0 b 09

  More information 2: 6e4d7c25afc4250296f8b39df8954e57

  3 more information: 0e19

  Additional information 4: 79b07001e2b2170f3bf5c0bdcf41c61c

  Windows Media Player Network Sharing Service has stopped working

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: wmpnetwk.exe

  Application version: 11.0.6001.7000

  Application timestamp: 47919370

  Fault Module name: wmp.dll

  Fault Module Version: 11.0.6002.18065

  Timestamp of Module error: 4a5de837

  Exception code: c0000005

  Exception offset: 00259b 38

  OS version: 6.0.6002.2.2.0.768.2

  Locale ID: 1033

  Additional information 1: 65ce

  More information 2: f3639ff676d879619c14ca889d32cd4c

  Information additional 3:9792

  Additional information 4: 137aaa9fce82e760bb8dec1aeefbbef9

  Thanks to all those who are able to provide information to resolve this problem.

  ~ Jessica DeGrandi

  My husband told me that he has always had difficulty to play the DVD on WMP.  I discovered that it would not play because there was a problem with the audio.  I couldn't find the solution to this problem.  However, we were able to play, burn and rip CDs until what we downloaded Windows SP2 for Vista Home Basic (32 bit), two days ago.  Since then, we have not been able to open the app, and the WMP network sharing Service.  I tried to run the Setup program, but it is said that there is a newer version of WMP and it will not replace or repair.  I wanted to see if I could find a solution to this problem without having to resort to reinstalling Vista or restore to an earlier point.  I also noticed that when the WMP application has been updated July 15 to the new version below, there were times this video Web sites would not play and we would have to restart the computer so that we can read them.  More information on apps not working do not are below:

  Windows Media Player has stopped working

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: wmplayer.exe

  Application version: 11.0.6002.18065

  Application timestamp: 4a5dce03

  Fault Module name: wmp.dll

  Fault Module Version: 11.0.6002.18065

  Timestamp of Module error: 4a5de837

  Exception code: c0000005

  Exception offset: 001ebbee

  OS version: 6.0.6002.2.2.0.768.2

  Locale ID: 1033

  Information additional 1: 0 b 09

  More information 2: 6e4d7c25afc4250296f8b39df8954e57

  3 more information: 0e19

  Additional information 4: 79b07001e2b2170f3bf5c0bdcf41c61c

  Windows Media Player Network Sharing Service has stopped working

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: wmpnetwk.exe

  Application version: 11.0.6001.7000

  Application timestamp: 47919370

  Fault Module name: wmp.dll

  Fault Module Version: 11.0.6002.18065

  Timestamp of Module error: 4a5de837

  Exception code: c0000005

  Exception offset: 00259b 38

  OS version: 6.0.6002.2.2.0.768.2

  Locale ID: 1033

  Additional information 1: 65ce

  More information 2: f3639ff676d879619c14ca889d32cd4c

  Information additional 3:9792

  Additional information 4: 137aaa9fce82e760bb8dec1aeefbbef9

  Thanks to all those who are able to provide information to resolve this problem.

  ~ Jessica DeGrandi

  Jessica DeGrandi, test cela in another profile and let us know your result:

  Create a new user profile:

  Follow these steps to create a new account, we can test:

  1. Open user accounts by clicking the Start button, clicking Control Panel, clicking user accounts and family safety, then clicking on user accounts.
  2. Click on manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. Click on create a new account.
  4. Type the name you want to assign to the user account, choose the type of administrator account on the computer, and then click on create an account.
  5. Log out and log in to the new account.
  6. Test the Windows Media Player.

  (To remove the test profile follow the steps above and choose to remove the account from the user accounts).

• Windows Media Center has stopped working

  I get a message saying windows media center has stopped working, I also have one indicating Manager windows media center has stopped working, I think that there is also a manager of STF Windows as well. It's just so a new computer should have no probs. There is also something strange happens with my internet connection. I have all the bars of signal strength, but keep dropping out. Telstra have been of no help!

  I tried the SCF/scannow but I received a message "windows resource protection cannot perform the requested operation" achieved 63% then stopped.
  It was moved by John of microsoft, but the place where? still no answers.

  Hello Emma Howard.

  Thank you for your message.  Please follow the steps below to see if re-register components of the media centre will help to resolve the problem.
  Click on the 'Start' button > in the search box, type "Command" > right click on command prompt and select "run as Administrator".
  Once the prompt command opened in a high State, type the following shots entered after each line.

  Regsvr32.exe atl.dll

  C:\WINDOWS\eHome\ehSched /unregServer

  C:\WINDOWS\eHome\ehSched/service

  C:\WINDOWS\eHome\ehRecvr /unregServer

  C:\WINDOWS\eHome\ehRecvr/service

  C:\WINDOWS\eHome\ehRec.exe /unregServer

  C:\WINDOWS\eHome\ehRec.exe/regserver

  C:\WINDOWS\eHome\ehmsas.exe /unregServer

  C:\WINDOWS\eHome\ehmsas.exe/regserver

  Please let us know if it did or did not help to solve the problem.

  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• in Vista, the Service Manager has stopped working

  I get a window saying delivery Manager has stopped working to come

  Hello

  ·          Will there be any changes made prior to this issue?

  I suggest you try the steps mentioned below.

  Step 1: Test in safe mode problem

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: Perform a clean boot, if the problem does not occur in Mode without failure.

  A clean boot helps eliminate software conflicts. Visit the link below to learn how to perform a clean boot.

  http://support.Microsoft.com/kb/929135

  Note: Please make sure that the computer is configured to start as usual by following step 7 of article.

  Additional information:

  Details of the event log

  Whenever you encounter this kind of problem, please check the event logs for details of the exact problem.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

• Microsoft Picture Manager has stopped working I am facing this problem two previous hours__

  Microsoft Picture Manager has stopped working, I faced this problem two previous hours.when I open programs view massage on screen photo managrt has stopped working

  Hi Araud,

  What programs do you speak? Remember to make changes to the computer before this problem?

  This problem can occur because of no present conflicts of Microsoft programs on the computer, I suggest you try the following steps:

  Step 1: Put the computer to clean and test start

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• WIN8 64bits - Recovery manager has stopped working error message

  Hello world. Just bought a computer laptop 1310sa m6 with envy. I tried to create a rescue disk set by using the Recovery Manager. It does not start, just gives the error message "Recovery Manager has stopped working." and then informs me that windows is collecting information and inform me a solution... Being that this machine is only 2 days is a bit much that parties do not work, in my opinion, one most important parts who! Has anyone encountered this and y at - it a solution?

  I tried to do a shadow with an O & O 7 disc image, works fine, but could not create a boot disk for a reason any (and Yes, I was using a 64-bit program!)

  Any help and advice would be accepted with gratitude

  JUST found the solution! DON'T bother with the HP Utility App Center. Go to search and type 'recover' and it will give you the option to create rescue disks... And it worked on my computer without any error message

• Windows Vista Basic has stopped working on my laptop.

  After my recent updates, Windows Vista Basic has stopped working on my laptop.

  After my recent updates, Windows Vista Basic has stopped working on my laptop.

  Hey shousell

  stoppped working covers a lot

  If you can not start, follow these steps

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  or transfer your question in forum windows update link below

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  Walter, the time zone traveller