Windows Update 8.1 - now my LaserJet P1005 printer will not work (AGAIN!)

Similar Questions

• Update and now HP LaserJet 3390 printer will not work on XP

  I have an acer netbook.  Yesterday morning my printer (HP LaserJet 3390) worked and now it doesn't.  I made a stop down on my netbook and I remember the icon that tells me an update is available.  I am running Windows XP with IE 7.  I let him do the update and now printer is not working.  I am printing wireless via a router and a modem.  I reinstalled the printer and the driver have also downloaded from the HP website.  Any suggestions?

  How to uninstall it?

  Hello

  With Windows XP, uninstall an update from start > settings > Control Panel > recent updates (check the "Show updates" box at the top of the page and select sort by name) should be at the bottom of the list. Right-click the update that you want to remove.

  * But *... It is not a good idea to install the security updates. You should try to solve the problem without uninstalling the updates.

  Don

• HP LaserJet 1015 printer will not work on Windows 8

  I have a HP LaserJet 1015 printer will not work.  Used with Windows 7 and it works very well, it will not work with Windows 8. Nothing came out.  I used all the devices, coil, etc that they had and was able to find.

  You can download the latest drivers from the following link for Windows 8:

  »	Microsoft Windows 8 (32-bit)
  	»	Microsoft Windows 8 (64-bit)

• Windows Update fails to install KB2539636, KB2468871, KB2533523. Will not work when installing manually or the other.

  I tried to make these updates manually, but they don't always work. I run Windows Vista 32-bit. Despite receiving an error message when installing updates via Windows Update or manually, when I go to the stop, the icon to install the updates always appears next to the stop button. I click to install updates day and then stop, but when I start my computer again the icon is still there, which indicates that they have not installed correctly.

  Manually update an error message of "> Code update here< does="" not="" apply,="" or="" is="" blocked="" by="" another="" condition="" on="" your="" computer.''="" is="">

  When trying to update by using Windows Update, it seems that everything is going as it should (the update is downloaded, it is made a point of restoration etc.) but after they have finished installing, I get an error message in the sense of "updates not installed correctly. An unknown error has occurred. ».

  This is the first problem I had with the Windows updates. Can anyone help?

  Thank you very much

  Nathan.

  Some people have reported that manually download and install updates succeeded in fact.

  Updates:

  1. http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=27017 (KB2539636)
  2. http://www.microsoft.com/download/en/details.aspx?id=3556 (KB2468871)
  3. http://www.microsoft.com/download/en/details.aspx?id=27014 (KB2533523)

  Make sure you download the one appropriate for your system.

  http://support.Microsoft.com/kb/827218 (ie X 86 32-bit =)

  Install as administrator.

• My firefox put updated recently. Now my pop mail server will not work. I did a "restore" to last week, and it was beautiful. He has now automatically updated. No mail server.

  I read through several answers to other people who have problems after an update. I'm not computer savvy enough to understand half of the recommended "solutions". I need the clear and final instructions about what to do. (Statement for "Dummies", is what I need.) I can't "restore" my computer continuously, that to have auto updates cause the mail server pop to stop working each time. If there is anything that I can do, I guess I'll have to stop using Mozilla Firefox. Can you help me?

  There is no solution for Firefox and Firefox pop does not have email and didn't need a POP mail server

  If you use Firefox to view and 'send', you will access a webmail provider.

  http://en.Wikipedia.org/wiki/Post_Office_Protocol

• Windows vista home basic original dics32bit sp1 product key will not work say code invalid disc P/N N353G

  Windows vista home basic original dics32bit sp1 product key will not work say code invalid disc P/N N353G

  I reinstalled my windows vista.made a clean install removed windows xp sp3 when I try to activate my windows vista Home Basic sp1 it say not validates the code supplied with the disc, the code is below my laptop and the cd is in the package with my laptop, I used the key once when I re-installed my operating system once and it worked perfectly

  If you get this message before you try to turn it on, it means generally that you must not read or wrong entered the key.

  Use a magnifying glass and a bright light to read the key (or ask someone else to read it for you)

  In particular check the characters B/8 and G/C/Q.

• HP laserjet 1012 printer # does not work.

  I have connected a printer HP laserjet 1012 # to a laptop via the USB port, windows7.  The printer will not work.  Troubleshooting shows no driver.  Programs of research/AutoCorrect cannot find a driver.  How can I find and load a driver for this printer?

  Either install the driver from the disk that came with the printer, or go to the HP website and download the appropriate driver.

• I created my site with Muse and uploaded to an external ftp hosting, now my secure log in will not work because I use no BC. Is there a way to create a secure log which will arrange with forced to use BC?

  I created my site with Muse and uploaded to an external ftp hosting, now my secure log in will not work because I use no BC. Is there a way to create a secure log which will arrange with forced to use BC?

  Hello

  Secure area login feature will not work unless you host your website with BusinessCatalyst.

  Please take a look at this as an alternative

  Password protect Pages Widget for Adobe Muse

  Also, check this thread,

  Re: Can I create a login/password in the Muse for a HTML5 page or two?

• I am running windows 8.1 and lightroom 5.7. AutoPlay will not work... period even though my settings in Control Panel. Try DVD and opens in Lightroom only! Any thoughts?

  I am running windows 8.1 and lightroom 5.7. AutoPlay will not work... period even though my settings in Control Panel. Try DVD and opens in Lightroom only! Any thoughts?

  OK I tried. No configuration work at all. And it is a purchased the LR in a group, set current online copy! I am at a loss. While I love the edition is a computer after all and I think I'll have a bit of scrap Lr if I can't solve this problem.

• Connected to my system HP-Laserjet-3050 printer does not work

  Printer connected to my HP-Laserjet-3050 system does not work. Please help me.

  Hello

  Uninstall and reinstall your printer using the right drivers and installation on the HP Web site information.

  And there are some troubleshooting steps for her there too.

  HP LaserJet 3050 all-in-One printer range

  Or you can also ask in the Forums of HP's Support.

  http://h30434.www3.HP.com/PSG/

  @@@@@@@@@@@@@@@@@@@@@@@

  This can also help you:

  "Solve printer problems.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  "Solve printer problems.

  In the upper right corner, select your operating system from the menu drop-down.

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  See you soon.

• I updated my Windows XP SP3 with Intel (r) core (TM) i5.24000CPU 3.1GH 1.9GH ram, but my HP laserjet 4 L printer will not work. How can I make it work?

  My HP laserjet 4L is inexpensive run and works well for the past 10 years. I would like to continue using it if possible.  I also use a printer connected to the desktop computer that works OK IE a 3180 HP printer photrosmart.

  My Installer, computers CK at the Mall South Vermont in VIC Australia treated my computers for 20 years and is competent to date and suggests the new card parent container is no longer stand it and deleted the 'old' system. I don't understand, I don't want to buy a new printer as existing it works OK.

  Peter Palmer

  Contact HP support. This has nothing to do with the Windows Update feature.

  PS: I would be very surprised that a laserjet printer introduced in October 1993 always worked in all 17 + years later! Good luck.

• After the recent windows update August 16, 2012, my connection to Internet is not working...

  Hello

  I use a laptop HP Pavilion with Windows Vista. August 17, 2012, my connection Internet has stopped working. He was showing 'Local' only against the State of the connection, even if my cable internet and routers wireless work correctly. I have connected to the internet from another computer using Windows XP.

  After having tried many options to solve the problem of the internet for fews and realizing none of them solved my problem: (, I decided to restore the computer to the factory settings on August 19, 2012.) But to my surprise, system recommended to restore to an earlier date (before these recent automatic updates are made on August 16, 2012). I thought to try and to my surprise, my connection Internet started working :).  Which made me think that something that happens in the recent update that is causing my internet connection does not work.

  At the beginning I was in doubt, but now I'm fully convinced as next morning of day again my internet connection stopped working again. I checked Windows update history and realized again automatically updates performed on August 20, 2012. I restored my computer to the previous version before updates again and the Internet started working.

  Here's what I see in the history of the update for that day.

  Update of security suites for Microsoft Office 2007 (KB2596856)

  Cumulative security update for Internet Explorer 9 for Windows Vista Systems (KB2722913) based on x 64

  Update security for Windows Vista for x 64-based systems (KB2731847)

  Update security for Windows Vista for x 64-based systems (KB2712808)

  Update of security suites for Microsoft Office 2007 (KB2596615)

  Update security for Windows Vista for x 64-based systems (KB2705219)

  Windows x 64-August malicious software removal tool (KB890830) 2012

  Can anyone help answer more?

  -What day could cause this problem?

  -How can I just remove this one update which may cause a problem (I'd like to get the other automatic updates in the future, so don't want to disable the auto update)?

  The guys at Microsoft told me, problem is introduced by McAfee.  Here is the link for the solution to the problem.

  http://service.McAfee.com/FAQDocument.aspx?ID=TS101446

  I didn't try it myself, as my internet problem is automatically solved in a few days. I think that my version of McAfee must have automatically been updated, which may have solved the problem.

• installed Windows 7 ultra 64 bit as upgrade to Vista Home Premium 64. Windows update only give me a scree empty and will not reduce.

  I've recently upgraded to Vista Home Premium 64 for windows 7 Ultimate.  When I click on Windows update after the installation, I get a blank screen that represents only a trace 'control panel-windowns update"and do not minimize or access the icons on my screen.  I can always get on the internet and open programs, but this screen blakn is on my page icon.  Incications are just running the program, but it displays 0 complete after 1 hour.

  Hi S RAGAN,

  I suggest to perform the clean boot on your computer and check.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  To perform a clean boot on a computer, follow these steps.

  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Please follow the system in the boot environment. If the problem does not occur, it indicates that the problem is related to an application or a service, we have disabled. You can use the MSCONFIG tool again to reactivate the disabled one by one element to find the culprit.

  If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.

  http://support.microsoft.com/kb/331796 . In addition, see the section on how to restore your computer to a Normal startup mode.

  If the same problem persists then, reset the Windows Update components and check.

  To reset the Windows Update components visit the link below and click on solve this button / follow the given steps to repair it yourself.
  http://support.Microsoft.com/kb/971058

  Hope this information is useful.
  Let me know if it worked.
   
  Thank you, and in what concerns:
  Umesh P - Microsoft Support

• My HP Laserjet 1200 printer will not print several copies.

  Printer was fine for several months after installing Windows 7/64, but now will not print multiple copies.
  Install the latest drivers from HP does not work.

  Sorry, none of these methods worked, but I found a "work around" which, although unsatisfactory, works.
  The only way I can change the "exemplary amount printed ' is to go of the program print menu and instead to use the box of"Copies", use" Properties/Advanced/paper output/copy Count"and change cela number of copies wanted, then run the print job, but don't forget to come back to this menu and change it to '1', which will continue to use the new set of amount." This seems to be a problem with the printer driver.

• Lexmark X 8350 printer will not work on the new Windows 7 computer

  My new computer has Windows 7 and I can't get my Lexmark X 8350 to work, I tried to download a driver of Lexmark and it does not work.  I called support for PC World and the person said that I would need to buy a new printer, but in this day and age that's just seems stupid.

  Hello!

  Do not connect the printer to the computer with the usb cable. Try to uninstall all Lexmark software from your computer correctly by clicking on the Windows logo start menu > programs > Lexmark Series folder > tools > uninstall. Restart the pc. Also, check if your Windows 7 is running on the operating system 32-bit or 64-bit by clicking on the Windows logo start menu > right-click on computer > properties.

  Now, there is no driver Lexmark X 8350 specific for Windows 7, however, the Vista driver works. For the software, go to this link: http://bit.ly/cK7w07 (for 32 - bit) or this link: http://bit.ly/9pAWzM (for 64 - bit). Download and install the software. Follow the instructions. I hope this helps.