Windows update bubble icon with "Windows can't check for updates.

Similar Questions

• Windows can't check for updates 80244019 error code.

  I have a problem, the system is vista home basic. Windows can't check for updates 80244019 error code. I have read many of the forms and ran from bugs that I found from microsoft. Further investigation indicates the RPC and DCOM service Launcher are grayed out and cannot be started or stoped.   Registry settings look good for the RPC service.  The DCOM service depends on RPC service.  In the GUI at the same time say they are started but from the comand prompt, I run the command net start and neither one is registered as running.  Any help would be appreciated.

  Thank you

  Hello

  (1) did you make any changes before the show?

  See the link below:

  Method 1: The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/

  Method 2: Windows Update error 80070422, 80244019, or 8DDD0018

  http://Windows.Microsoft.com/en-AU/Windows-Vista/Windows-Update-error-80070422-80244019-or-8DDD0018

  Method 3: You can start the online virus scan and check.

  How to remove a computer virus?

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-remove-a-computer-virus

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Let us know if that helps.

• My automatic updates Windows Vista do not work? Error: Windows can't check for updates

  original title: My automatic Windows Vista updates do not work?

  My automatic updates Windows Vista do not work? There is no error code, it just says "Windows can't check for updates.

  I tried to use the fix from microsoft, it would join in the other responses, but it did not work.

  And have you tried resolution: method 2 in http://support.microsoft.com/kb/946414?

• Vista Home Premium - icon shows "windows can't check for updates.

  Recently, the icon of update in the system tray is always present and displays the message "windows cannot check for updates.  However, updates are always being informed when they are available (finally been windows 06/06/09 update of Defender), but may not be installed until I have shut down the machine.

  Manually check the updates just - scans without any reported results.

  Any help would be appreciated

  Hi Graeme1962

  To exclude a malware infection.  You can use the tool that is located at the following link
  http://www.Microsoft.com/security/malwareremove/default.mspx

  Also, take a look at this Article
  http://support.Microsoft.com/kb/947821

  Please post back the results

  Ken
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows can't check for updates, update history lists all updates but updates installed tells me that I have no updates installed.

  Hi, I use Win Vista Ultimate 32-bit sp1.  I have KIS2009, A Squared Anti Malware, MalwareBytes Anti Malware installed.  All showing my system is clean.  I ran MSRT analysis to light, and he pointed out that my system is clean also.

  The problem
  When I connect, I get a balloon in the notification area telling me that "windows cannot check for updates.  Opening of update of Windows and do it to check a windows update updates it just go and research without results.  It justs keep checking, but I get no error.  Lists history of update Windows Defender updates the last today, 06/09/09.  All updates prior to this are Windows Defender until 28/04/09.  At this time I have installed 15 updates, including some Office updates.  Click on installed updates and finally I said that there is no update at all?:

  What I tried
  I disabled my firewall and tried again.  No luck :(

  Tried a point files, but apparently I don't have?  I should have, but there is none there.  Install Win7 RC on a different partition, would this have wiped my restore points? I remember Vista made this for XP, but assumed that this would have been resolved with Win7.

  I tried to install Win Vista sp2 but unfortunately, I installed the Russian language (don't know why I, I was annoyed a day) but the sp2 download in five languages and Russian is not one of them :(

  So I tried to do a search on it.  Came across various inscription mention deletion of registry keys.  Only problem is that I have not mentioned keys.  Some keys were supposed to be in the components of HKLM, sorry can't remember the others.

  Find this site, I tried the FIX tool, reset Windows Update.  He ran not aggressive and he made the restoration, request for permission to UAC thingy, then the progress bar moves to the right and nothing else happens.  Restarted exciting tried and the same thing happens.  Been sitting there for more than two hours and no results.

  I checked services.msc.  I have BITS began, was automatic but have updated the manual according to the instructions contained in the ' automatic updates can be turned off "at the top of the forum.  Update of Windows, The Windows event log and Software Licensing Service are all set to automatic, and running.

  Windows Update log shows the following:

  2009-06-09 19:09:25:462 1520 1318 Agent warning: has no rule Installed, updateId = {B02D2701-EFE6-4CC3-A434-FFD9B029F750}.100, hr = 80070002
  2009-06-09 19:10:34:647 1520 1318 Agent warning: is not Installable rule, updateId = {B02D2701-EFE6-4CC3-A434-FFD9B029F750}.100, hr = 80070002
  2009-06-09 19:12:56:989 1520 1318 Agent warning: has no rule Installed, updateId = {1884967F-0853-44CD-8247-4AE9E97E3803}.100, hr = 80070002
  2009-06-09 19:14:10:241 1520 1318 Agent warning: is not Installable rule, updateId = {1884967F-0853-44CD-8247-4AE9E97E3803}.100, hr = 80070002
  2009-06-09 19:16:29:371 1520 1318 Agent warning: has no rule Installed, updateId = {835AEBB1-9A4E-44CD-9415-0BF0744378D0}.100, hr = 80070002
  2009-06-09 19:17:34:769 1520 1318 Agent warning: is not Installable rule, updateId = {835AEBB1-9A4E-44CD-9415-0BF0744378D0}.100, hr = 80070002
  2009-06-09 19:19:53:027 1520 1318 Agent warning: is not Installed, updateId = {1A3A237B-486A-4965-A5D1-999416F40191} rule.102, hr = 80070002
  2009-06-09 19:21:03:898 1520 1318 Agent warning: is not Installable rule, updateId = {1A3A237B-486A-4965-A5D1-999416F40191}.102, hr = 80070002
  2009-06-09 19:23:17:820 1520 1318 Agent warning: has no rule Installed, updateId = {152709D3-D663-4C46-B8C6-31498E11692E}.103, hr = 80070002
  2009-06-09 19:24:26:158 1520 1318 Agent warning: is not Installable rule, updateId = {152709D3-D663-4C46-B8C6-31498E11692E}.103, hr = 80070002
  2009-06-09 19:26:43:400 1520 1318 Agent warning: has no rule Installed, updateId = {DA83283A-4A36-43CB-A7DD-717885E03373}.100, hr = 80070002
  2009-06-09 19:27:56:013 1520 1318 Agent warning: is not Installable rule, updateId = {DA83283A-4A36-43CB-A7DD-717885E03373}.100, hr = 80070002
  2009-06-09 19:30:11:756 1520 1318 Agent warning: has no rule Installed, updateId = {8893E665-1514-4A23-B6EB-E45376B12610}.101, hr = 80070002
  2009-06-09 19:31:14:801 1520 1318 Agent warning: is not Installable rule, updateId = {8893E665-1514-4A23-B6EB-E45376B12610}.101, hr = 80070002
  2009-06-09 19:33:33:793 1520 1318 Agent warning: has no rule Installed, updateId = {C0A06671-C3EC-4A02-B22C-9395A802548A}.100, hr = 80070002
  2009-06-09 19:34:40:576 1520 1318 Agent warning: is not Installable rule, updateId = {C0A06671-C3EC-4A02-B22C-9395A802548A}.100, hr = 80070002
  2009-06-09 19:36:52:233 1520 1318 Agent warning: has no rule Installed, updateId = {462BC0AA-53AB-4DE0-AA12-6A6BA13F946C}.100, hr = 80070002
  2009-06-09 19:37:58:933 1520 1318 Agent warning: is not Installable rule, updateId = {462BC0AA-53AB-4DE0-AA12-6A6BA13F946C}.100, hr = 80070002
  2009-06-09 19:40:04:534 1520 1318 Agent warning: has no rule Installed, updateId = {DE040314-4AF9-44A1-A08E-B36E0F350CE2}.100, hr = 80070002
  2009-06-09 19:41:09:853 1520 1318 Agent warning: is not Installable rule, updateId = {DE040314-4AF9-44A1-A08E-B36E0F350CE2}.100, hr = 80070002
  2009-06-09 19:43:18:343 1520 1318 Agent warning: has no rule Installed, updateId = {313C8158-B0D7-41E8-A95E-06CACF808DC9}.101, hr = 80070002
  2009-06-09 19:44:22:693 1520 1318 Agent warning: is not Installable rule, updateId = {313C8158-B0D7-41E8-A95E-06CACF808DC9}.101, hr = 80070002
  2009-06-09 19:46:38:698 1520 1318 Agent warning: has no rule Installed, updateId = {736D69E8-AE0A-43F3-AB81-684A76DFCB76}.101, hr = 80070002
  2009-06-09 19:47:50:519 1520 1318 Agent warning: is not Installable rule, updateId = {736D69E8-AE0A-43F3-AB81-684A76DFCB76}.101, hr = 80070002
  2009-06-09 19:50:03:582 1520 1318 Agent warning: has no rule Installed, updateId = {936F0B44-C846-40BA-9FC9-D710759708CD}.101, hr = 80070002
  2009-06-09 19:52:01:785 1520 1318 Agent warning: is not Installed, updateId = {F200C6C7-A178-4DF7-B491-12E8D4D3AD52} rule.102, hr = 80070002
  2009-06-09 19:52:58:214 1520 1318 Agent warning: is not Installable rule, updateId = {F200C6C7-A178-4DF7-B491-12E8D4D3AD52}.102, hr = 80070002
  2009-06-09 19:54:54:313 1520 1318 Agent warning: has no rule Installed, updateId = {0CFBE648-D8B4-495E-8671-73981EA7185A}.101, hr = 80070002
  2009-06-09 19:55:54:479 1520 1318 Agent warning: is not Installable rule, updateId = {0CFBE648-D8B4-495E-8671-73981EA7185A}.101, hr = 80070002
  2009-06-09 19:57:48:021 1520 1318 Agent warning: has no rule Installed, updateId = {7E3F49B2-DE7E-4296-BA5B-F989FCD368B4}.100, hr = 80070002
  2009-06-09 19:58:47:831 1520 1318 Agent warning: is not Installable rule, updateId = {7E3F49B2-DE7E-4296-BA5B-F989FCD368B4}.100, hr = 80070002
  2009-06-09 20:00:52:678 1520 1318 Agent warning: has no rule Installed, updateId = {511942F6-A887-414F-938C-860FFDD8E0BE}.101, hr = 80070002
  2009-06-09 20:01:55:245 1520 1318 Agent warning: is not Installable rule, updateId = {511942F6-A887-414F-938C-860FFDD8E0BE}.101, hr = 80070002
  2009-06-09 20:03:53:470 1520 1318 Agent warning: has no rule Installed, updateId = {6B7CD081-8091-438F-A74E-0C7140CDF258}.101, hr = 80070002
  2009-06-09 20:04:51:247 1520 1318 Agent warning: is not Installable rule, updateId = {6B7CD081-8091-438F-A74E-0C7140CDF258}.101, hr = 80070002
  2009-06-09 20:06:49:001 1520 1318 Agent warning: has no rule Installed, updateId = {5550D892-A28D-433F-B6E0-2F1E191ABDC9}.100, hr = 80070002
  2009-06-09 20:07:50:869 1520 1318 Agent warning: is not Installable rule, updateId = {5550D892-A28D-433F-B6E0-2F1E191ABDC9}.100, hr = 80070002
  2009-06-09 20:09:47:511 1520 1318 Agent warning: has no rule Installed, updateId = {5823AA12-8424-4D21-8DAD-6DA4A75B20E7}.100, hr = 80070002
  2009-06-09 20:10:42:362 1520 1318 Agent warning: is not Installable rule, updateId = {5823AA12-8424-4D21-8DAD-6DA4A75B20E7}.100, hr = 80070002
  2009-06-09 20:12:41:491 1520 1318 Agent warning: has no rule Installed, updateId = {658F3DA6-E37A-4678-984A-6965D84928F6}.100, hr = 80070002
  2009-06-09 20:13:44:961 1520 1318 Agent warning: is not Installable rule, updateId = {658F3DA6-E37A-4678-984A-6965D84928F6}.100, hr = 80070002
  2009-06-09 20:15:43:481 1520 1318 Agent warning: has no rule Installed, updateId = {74B4A904-58C1-423C-B12F-F6C8499BB431}.100, hr = 80070002
  2009-06-09 20:16:42:445 1520 1318 Agent warning: is not Installable rule, updateId = {74B4A904-58C1-423C-B12F-F6C8499BB431}.100, hr = 80070002
  2009-06-09 20:18:41:246 1520 1318 Agent warning: has no rule Installed, updateId = {A88F5458-4936-4859-B60D-97E42F169964}.100, hr = 80070002
  2009-06-09 20:19:40:228 1520 1318 Agent warning: is not Installable rule, updateId = {A88F5458-4936-4859-B60D-97E42F169964}.100, hr = 80070002
  2009-06-09 20:21:33:489 1520 1318 Agent warning: has no rule Installed, updateId = {D760D61F-1684-4B14-A93F-DC76B285E90F}.101, hr = 80070002
  2009-06-09 20:22:32:517 1520 1318 Agent warning: is not Installable rule, updateId = {D760D61F-1684-4B14-A93F-DC76B285E90F}.101, hr = 80070002
  2009-06-09 20:24:32:922 1520 1318 Agent warning: is not Installed, updateId = {7B09DEC4-4EEB-4778-A9B8-695B1FDD8D5B} rule.102, hr = 80070002
  2009-06-09 20:25:34:578 1520 1318 Agent warning: is not Installable rule, updateId = {7B09DEC4-4EEB-4778-A9B8-695B1FDD8D5B}.102, hr = 80070002
  2009-06-09 20:27:42:707 1520 1318 Agent warning: has no rule Installed, updateId = {B034622F-57C7-42C9-A7FB-ED3037128B14}.101, hr = 80070002
  2009-06-09 20:28:38:864 1520 1318 Agent warning: is not Installable rule, updateId = {B034622F-57C7-42C9-A7FB-ED3037128B14}.101, hr = 80070002
  2009-06-09 1520 173 20:30:15:301 c to THE trigger to THE detection via API DetectNow
  2009-06-09 1520 173 c. 20:30:15:301 to THE will make the current sensing end detection
  2009-06-09 20:30:44:091 1520 1318 Agent warning: has no rule Installed, updateId = {08E30185-E7CE-4D1B-950C-F8A8A405B0F3}.101, hr = 80070002
  2009-06-09 20:31:41:476 1520 1318 Agent warning: is not Installable rule, updateId = {08E30185-E7CE-4D1B-950C-F8A8A405B0F3}.101, hr = 80070002
  2009-06-09 20:33:41:376 1520 1318 Agent warning: has no rule Installed, updateId = {3EDF9508-B8FE-4ACD-9B59-135D503F2B85}.100, hr = 80070002
  2009-06-09 20:34:36:095 1520 1318 Agent warning: is not Installable rule, updateId = {3EDF9508-B8FE-4ACD-9B59-135D503F2B85}.100, hr = 80070002
  2009-06-09 20:36:38:753 1520 1318 Agent warning: has no rule Installed, updateId = {CD5D1875-5AB6-4437-83A3-E74BEFED8256}.104, hr = 80070002
  2009-06-09 20:37:40:916 1520 1318 Agent warning: is not Installable rule, updateId = {CD5D1875-5AB6-4437-83A3-E74BEFED8256}.104, hr = 80070002
  2009-06-09 20:39:41:279 1520 1318 Agent warning: has no rule Installed, updateId = {2C5B37D4-6912-4D00-B005-ECE69EA8F5BF}.101, hr = 80070002
  2009-06-09 20:40:40:934 1520 1318 Agent warning: is not Installable rule, updateId = {2C5B37D4-6912-4D00-B005-ECE69EA8F5BF}.101, hr = 80070002

  Don't understand any of this.

  Any notice received with gratitude.

  Martin,
  Thanks for your help so far.  I hope you don't mind but today how that spending (hard day @ work) I think I'll leave the installation of repair until tomorrow.  More that likely the disc would have burst in the player, causing a sort of spike power was so my motherboard.  So I think I'll just relax tonight and I hope tomorrow is a day better.  Hope you have a good.

  See you soon

• I get "Windows can't check for updates" everytime I try I get a "an error occurred" why I can't get this to work?

  I can't get updates at all. I did have one in 2 weeks because the automatic update can not pass for some reason any... Does anyone have this problem before?

  CharlesPyle,

  Suggest that you first spread malware as the cause of the problem by following these steps:

  (1) have your system scanned by the antivirus/security suite installed.
  (2) run this tool from Kaspersky: how to remove malware belonging to the family Rootkit.Win32.TDSS http://support.kaspersky.com/viruses/solutions?qid=208280684>

  If no malware has been detected, there's a Fixit on this page which will reset the Windows Update components:

  How to reset Windows Update http://support.microsoft.com/kb/971058components >

  Suggest you download and Save it. Then, close all the open programs and web browsers.
  Run Microsoft Fixit50202.msi and choose its default mode.
  After that he finished the race, see if the return code is displayed again when looking for updates.

  If not, then run the Fixit once more and choose his Aggressive mode.
  Restart once it is finished and see if the return code always appears when the updates.

  IF malware is detected, then please post if it has been removed and that the specific name of what has been detected.

  06/20 / 1109:22:48

• Windows can't check for updates

  I have windows vista and it cannot check the updates.  I got an error 8007007A code.  I searched online, nothing helps.  Help!

  ·         I have Bajmaj,

  Thanks for posting on the Microsoft answers Forums
  Doing some research I found this:
  "0x8007007a: the data area passed to a system call is too small."

  CAUSE
  This problem occurs because the buffer that stores the account information for all scheduled tasks is limited. the buffer puts a limit on the number of jobs that you can plan with user credentials. There is no limit on the number of jobs that you can create without user credentials.
  RESOLUTION
  To work around this problem, stop and start the Task Scheduler service, wait 10 to 15 minutes and then to schedule tasks. »

  Click on start, type bar, the serviceand select the services since the research gives search icon.
  find Task Scheduler service right click top and select stop, wait 15 seconds, then right-click again and start to it.
  Then try to update again.
  Do you have service pack 1 SP1?

  Please post back and let us know if this information was useful or if you are still needing help.

  Thank you

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• my windows can't check for updates, I have a few critical updates that must be how to fix this?

  I tried troubleshooting and it seems just to send me to microsoft and I can't find the answer there.  It does not give me a code or anything either, it's just when I run my mouse over the Update icon in the lower right of the screen.  I just tried to install it and it gave me the code 80072EFD

  I tried troubleshooting and it seems just to send me to microsoft and I can't find the answer there.  It does not give me a code or anything either, it's just when I run my mouse over the Update icon in the lower right of the screen.  I just tried to install it and it gave me the code 80072EFD

  See if this article will help you to solve the problem:
  Windows Update error 80072efd
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80072efd

  t-4-2

• Windows can't check for updates, error 80070409. How can I fix it

  What should I do?

  Quote your full version of Windows (for example, WinXP SP3;) Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

  How about 80070490error?

  With the kind permission of Update Services MVP TaurArian:

  0 X 80070490 - ERROR_NOT_FOUND
  Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

  The error you receive occurs if there is corruption in the manifest of component maintenance base.

  Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
  http://support.Microsoft.com/kb/931712 ["says SFC / Scannow ']

  A repair install is the usual solution of SFC/scannow does not work.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  NB: If you have installed SP1 for Vista see http://support.microsoft.com/kb/948537

  Step 7 (method for Windows Vista), the * UPGRADE option is not available because SP1 has been installed.

  Uninstall SP1

  See also:

  How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How can I check for dates that are the same for today.

  If I have a bunch of dates in a datetime colum. How can I check for dates that are the same for today.
  "For example, this value of days would be ' #dateFormat (now (),"mm dd yyyy") #
  
  The best I could come up with was:
  
  Select * from data where data.userID =
  2635 AND
  "Convert (varchar, dateAdded, 101) = ' #dateFormat (now (),"mm dd yyyy") #
  
  
  How can I get this to work smart peeople :)

  It is best to make the comparison on the datetime values. One technique is to get the current date at midnight. Then add one day to get tomorrow's date. In your sql query finds all values is greater than or equal to today and less than tomorrow.

  One solution is to do everything in MS SQL

  WHERE the dateAdded > = convert (datetime, convert (varchar, getdate(), 112), 112)
  AND dateAdded = dateAdd (d, 1, convert (datetime, convert (varchar, getdate(), 112), 112))

  Another option could be to use CF to calculate dates:

  
  

  WHERE the dateAdded > =.
  AND dateAdded<>

• Top desktop PC. OS: Vista Ultimate sp2. Error code "Windows can't check new updates" message "800f080d".

  I tried all of the suggestions for help with this error! Still no relief. Please notify. Thank you, in advance,

  Moe723

  Hello

  1. have you plugged all third-party devices other than the keyboard and mouse?

  2 have you made changes on the computer before this problem?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Reset Windows Update components and check if that helps.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  Method 2:

  Run the system update readiness tool and check if that helps.

  Description of the system update tool for Windows Vista, Windows Server 2008, Windows 7 and Windows Server 2008 R2: http://support.microsoft.com/?kbid=947821

  Method 3:

  Run the scan tool (SFC) System File Checker and check if it helps.

  How to use the tool File Checker system to troubleshoot missing or corrupted on Windows Vista system files: http://support.microsoft.com/kb/929833

  And also disconnected all external devices except the mouse and keyboard and then try to check for the updates.

  Hope the information is useful.

• After the removal of the malware, I can't check for updates or download files of definition of

  I bought a PC with Windows XP Professional. He has been infected with 5 different Trojan horses, a backdoor and other malicious software. I cleaned the computer but found that I can't download Security Essentials definition updates or even can I search for updates by using Windows Update.  It gives an error saying that there is a problem with the network connection. Otherwise, I can access internet and download, and the only remaining issue was when Java gave me a prompt to download a update of the skipped upward same error box. While the computer has been infected, it actually blocked access to the internet and I couldn't access it at all so I think that the malware must have corrupted one or several files somewhere along the line. Unfortunately, I don't have the original XP system disk to perform an upgrade on the spot to restore the files. If anyone has ideas on how I could fix this problem before reloading the operating system, it would be much appreciated. Thank you.

  I will be reload the OS so I have my answer to this question. Please, if anyone wants to add anything don't hesitate not, but if you insist on patronising pass to the next thread to exercise your "superiority". Thank you.

  You can trust in the security of any computer used until you have formatted the HARD drive & then did a clean install of Windows. Period, end of story.

  Follow the instructions in this post of mine in another forum (to-the-letter & in order!) to restore your computer to a State safe & functional: http://aumha.net/viewtopic.php?f=62&t=44636

  If you need additional assistance with the clean install, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

  Note: The computer must not be connected to the internet or local area network (i.e. other computers) in its current state. All personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.

  Wish I had better news for you.  Good luck!

• How to get windows live to check for new messages more often and?

  How can I get windows live to check new messages more often and how do I get it to send mail when I'm done otherwise that hit the button send and rec? I miss OutLook Express!

  OH, and why can't get us Outlook Express on a Windows 7 PC? It's a great program! User Friendly etc. I hate Windows LIVE BTW!

  Jimmy, WX9DX

  Re email check frequency, see here...

  http://email.about.com/od/outlookexpressmailsync/Qt/Check_for_New_Mail_Periodically_in_Windows_Live_Mail_or_OE.htm

  There are other e-mail clients...

  http://www.MakeUseOf.com/tag/free-email-clients-Windows-7/

• How can I check for the Officeject 5510 ink levels?

  How can I check the Officejet 5510 ink levels?

  Thanks, but which refers to the HP Director to access the ink levels and I couldn't find that. I ended up replacing this printer with a new then is no longer a problem, but appreciate your response.

• How to check if the value of text is in a view accessor? How can I check for validation?

  Hi Experts ADF,

  JDeveloper 12.1.1.3.0

  I have a VO with a Segment1 column. And I have an accessor in my VO as SegmentVA which contains all the numbers.

  So in the user interface, I'm having a Segment1 as an inputText. The user should then enter values in inputText.  How can I check to validate that the value you enter must be valid within the ViewAccessor.

  Thank you

  Animesh

  You can use a declarative approach and define the Validation rule on EO attribute.

  Or you can create the method in your ViewObjectImpl class, expose this method as a customer interface, create custom for your input field validator and invoke the VO method from there.

  Dario