Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer

My computer stops the update via WIndows Update Component

Whenever a try to do the manual update using this component I get the message;   * Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer *...

My computer has a few updates, but can not run these update

Whenever I try to run computer shotdown/updates remain frozen for a while and stops without updating

He starts to run updates 1 of 13... and stops

If I shutdown normal e, computer stay likehanging 1 hour without stopping.

I would like to know how to solve this problem

Thank you

Concerning

Gladmar.

Hello

Were there any changes made on the computer before the show?

Perform the following methods and check:

Method 1:

I suggest you to check if you are able to access Windows Update service and ensure that the following services are started. If it is not started, follow these steps:

a. click Start, type services.msc and press enter.
b. search Windows Update.
c. right-click on the service and select Properties.
d. in type of startup, select enable.
e. click Start under the Service status.
f. click OK.
g. Repeat steps c to f for the following services:

Background Intelligent Transfer Service
Cryptographic services

If the steps do not help to solve the problem, you can go ahead with the methods mentioned below and check.

Method 2:

How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058

Method 3:

Your anti-virus software is in conflict with Windows updates. You can test this by temporarily disabling your antivirus:

Disable the antivirus software
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

Method 4:

The problem with Microsoft Windows Update is not working

http://support.Microsoft.com/mats/windows_update/

See also:

Troubleshoot problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

Updates: frequently asked questions


http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions

I hope this helps.

Tags: Windows

Similar Questions

  • Error message "WIndows cannot currently check the updates, because the service is not running, you may need to restart your computer.

    Error message "WIndows cannot currently check the updates, because the service is not running, you may need to restart your computer.

    I am currently using windows 32 bit vist

    I rebooted, I changed the settings, I don't have a file called window update service in the service section to stop and start, I tried the fix programs, I'm out of ideas and I need help!

    Suggestions?

    Hello

    1. have you made changes on the computer before this problem?

    2. which antivirus app do you use?

    I suggest you try these methods and check.

    Method 1:

    Anti-virus software may conflict with Windows Update. You can temporary disable them and check the issue.

    Disable the antivirus software
    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2:
    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058
    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:
    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

    Method 3: If the methods above do not help, I suggest you delete the edb.log file and check if that helps.

    Follow these steps:

    a. click the Start button, click computer.

    b. now, go to this site: C:\windows\softwaredistribution\datastore\logs\edb.log
    Where 'C' is the drive of operating system
    c. delete the log file, and then restart the computer and check the issue.

  • Can't get updates for Windows, "Windows Update cannot currently check for updates, because the service is not running." You may need. "" Restart your computer.

    When I try to install the updates I receive the message "Windows Update cannot currently check for updates, because the service is not running."  You may need. "" Restart your computer,   It does not also. check me the update history

    Hello

    1. you made any hardware or software changes the computer recently?

    2. What is the number of update?

    3. do you get this message for all the updates?

    Follow these methods and check if that helps:

    Method 1:

    Step 1.

    Unplug all external devices, restart the computer, and then try to install updates.

    Step 2:

    I suggest that you follow the steps mentioned and try to start the Windows update service.

    Check if the following services are running.

    (a) Background Intelligent Transfer Service

    (b) cryptographic Service

    (c) Windows Update

    (d) Windows Installer

    a. Click Start, type "services.msc" (without the quotes) and press ENTER.

    b. double-click the service name in the Services list.

    c. under the general tab, next to startup type, make sure that automatic is selected.

    d. If the service is not already running, under Service status, click Start and then click OK.

    e. once the services are started and defined as running, try to install the updates and check.

    Method 2.

    You can follow the steps in this article: http://support.microsoft.com/kb/2509997

    Warning check disk.

    Important: All by performing the check disk on the hard drive if bad sectors are found then check disk try to repair this area, all available data on this sector can be lost.

    Registry warning

    To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 (http://support.microsoft.com/kb/322756/)

    How to back up and restore the registry in Windows

    See also: the problems with installing updates

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  • Windows update will not work or let me start the update program, get the Windows Update error cannot currently get "some updates because this service does not work"

    I moved and my computer is stuck off like 2 and a half months. Well, now I'm back on it, but for some reason any my Windows Update does not start. Whenever I go to him, he tells me that the program is not running and you may have to restart. I do and he said to me again and the same thing. So I went in my services to ensure that all programs, that depends on run works and he says even its operation. How can I fix it?

    Hello Nick,

    Here is a link where you can reset windows update components.

    http://go.Microsoft.com/?linkid=9665683

    Download the fix - it and run the fix - it.

    Please select the mode option run aggressive.

    Disable your anti-virus software.

    Restart the computer and verify if you are able to install the updates.

    Kind regards

    Sumanth.B.S

  • I can't get the update of windows to run. I get an error message that says that the update service does not work and I have to restart my computer.

    I am running Vista on a 64-bit computer.  I don't know with certainty how current I am, because as a problem earlier, but different, brought me back to earlier restore versions.  I checked the Services and confirmed that the Windows Update service is started.  I restarted my computer and the problem persists.

    Is there a file that might have something in it that shouldn't be there or I'm probably deal with a corrupt program?

    Hello

    You can reset the Windows components and see if it works fine.
    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058

  • Updated Windows cannot currently check updates, because the service is not running. You may have to restart your computer

    Original title: Windows Update problem, help please

    Whenever I go to windows update, it says "Windows update cannot currently check updates, because the service is not running. You may have to restart your computer"I restarted my computer, but the same message back steadily for several weeks. How can I fix?

    Thank you

    Hi Lydia,.

    There are three services that are important to check, download and install the updates. These services are Background Intelligent of cryptographic services service and the Windows update Service. These should be in the started state and currently running on the computer so that the computer connects to Windows Update Server, check the update that corresponds to the computer, and then download them accordingly.

    Follow the steps in http://support.microsoft.com/kb/2730071 and make sure that these services are started on the computer. If they are, then if he please stop and then restart the services. Restart the computer once that change in services.

    It will be useful.

  • Error "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer. "after replacing hard drive

    I've upgraded to a replacement hard drive, but Windows Update won't work now. Everything else seems OK.

    The error is: "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer.

    I restarted the computer a couple of times and in respect of the Services runs it the Windows Update service.

    Operating system is Vista 64 bit.

    Original title: Windows Update

    I've upgraded to a replacement hard drive, but Windows Update won't work now. Everything else seems OK.

    The error is: "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer.

    I restarted the computer a couple of times and in respect of the Services runs it the Windows Update service.

    Operating system is Vista 64 bit.

    After the upgrade to the bigger hard disk, I found that the technology Intel Rapid Storage Technology driver should be updated. Once this is done Windows update ran properly. Microsoft Fixit did not help in this circumstance.

  • "The Windows Update cannot currently Check For Updates, because the Service is not running. You may have to restart your computer.

    Unlike before, I can't launch the Windows automatic update service now, I suspect that my computer is infected virus, I just install demo version free of McAfee internet security and run a full scan, no infection has been detected.

    Description:

    When I click on Windows update for all programs at startup, pop out window update, and then I click on "check update", out another part: list "" Windows Update cannot currently Check For Updates, because the Service is not running. "You may need to restart your calculater ', then I restart the computer a few times, the same problem still persists. before I was using microsoft essential secruty with no problems, but now I can't seem to complete the definition of update, so I think this problem could be related to Windows Update and decide to uninstall MSE and replace it with McAfee, but it does not work.

    any help and suggestions would be very appreciated.

    Hello

    Steps 2 to 6 to identify the program that is causing the problem if the clean boot solves the problem.

    Try the procedure described in the following article to improve your computer's performance.

    Optimize Windows 7 for better performance.

    http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

    Ways to improve your computer's performance.

    http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-your-computers-performance

  • Windows Update cannot currently check the updates, because the service is not running. You may have to restart your computer.

    Whenever I have click search for updates in Windows Update and it just gives me the error message: Windows Update cannot currently check the updates, because the service is not running. You may have to restart your computer. Can someone help me please? I'm using Windows Vista Basic

    Hello

    see if that helps to fix:

    How to reset the Windows Update components?

    There is also an automatic 'fix - it' here

    http://support.Microsoft.com/kb/971058

    Also, try to put the KB numbers in the search on the link below and then manually download the

    http://www.Microsoft.com/downloads/en/default.aspx

     

    or please repost your question in the correct windows update forum

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

  • Error - Windows Update cannot currently check the updates, because the service is not running. You may have to restart your computer

    Original title - Vista sp2 64-bit windows program update is not running

    When I open the program "Windows Update", it has an "X" in a red shield symbol.  When I click on the tab "Check for updates", I instantly get a message that says: "the Windows Update cannot currently check for updates, because the service is not running."  You may have to restart your computer.  When I click on the button 'Start' and the window appears with the options of closing down, change user, registration, etc., the first button shows an orange exclaimation mark and when selected the computer seems to make an attempt to download whatever it tries to download.  However, it never downloads anything, and the rest of the exclaimation mark orange.  How can I solve these two issues?  I'm guessing that repair will set the other.

    Hi doubleott


    Method 1:

    You can perform a scan of the SFC (System File Checker). It lists all the issues and will also retrieve all files if necessary. Follow the steps below to p Ed a SFC Scan -.

    a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
    b. type the following command and press ENTER:
    sfc/scannow
    A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
    c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
    d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
    e. once the scan is finished, close the command prompt window, restart the computer and check.

    Check the link below for further guidance on scan SFC - mentioned
    http://support.Microsoft.com/kb/929833

    Method 2:

    You can try to reset the Windows Update components and check if that helps. Follow the link given below to do the same.
    http://support.Microsoft.com/kb/971058

    I hope this helps.

  • I can't check the updates, because he said that "the service does not work."

    I can't check the updates, because he said that "the service does not work."

    Error: Windows Update cannot check the updates, because the Service is not running
    http://support.Microsoft.com/kb/2730071

  • Get the error the Service does not work when you try to update

    Original title: Dell Inspiron 1545 model

    My Labtop wife; the automatic update is enabled; but will NOT be updated. When I try to update; There are NO error codes. After trying to update. The computer

    addresses by specifying THE SERVICE IS DO NOT running. You must restart; also the F8 key does not work.

    Hello

    1. What is the error message right on the service does not work?

    2. were there any changes (hardware or software) to the computer before the show?

    Perform the steps in the link and check.

    The problems with the installation of updates (Windows Vista)

    Hope this information helps.

  • After downloading recently some 60 more Windows updates that me seems to be stuck in an infinite loop restart your computer.

    * Original title: download Windows updates

    After downloading recently some 60 more Windows updates that me seems to be stuck in an infinite loop restart your computer.

    Download the historical State successful but may need to restart.   Several attempts to restart always end with reboot so unable to see if other updates are available.

    Windows Update does not work

    This is a very common problem lately.

    Download and run the appropriate version for your system from the system update readiness tool.  System 32-bit X 86 must https://support.Microsoft.com/en-ca/KB/947821.  System 64-bit X 64.

    As a general rule, the following rather simple and fast process should be.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-update/Windows-Update-problem-error-code-80080008/de8114b5-1487-4B31-9b28-f11974718df1?auth=1  This thread has essentially lists a series of commands that I found generally fixed WU.

    Start, all programs, accessories, right-click on command prompt, select run as administrator, OK.  Type the following in the black box:

    1. net stop wuauserv
    2. net stop cryptSvc
    3. net stop bits
    4. net stop msiserver
    5. Ren SoftwareDistribution.old C:\Windows\SoftwareDistribution
    6. Ren C:\Windows\System32\catroot2 catroot2.old
    7. net start wuauserv
    8. net start cryptSvc
    9. net start bits
    10. net start msiserver
    11. pause
    12. Output

    Services of type in the text box above the start planet.  Find each of the following items and make sure they are set to automatic: Intelligent Transfer in the background, cryptographic, Windows Installer, Windows Update services.  Double-click on each item and choose automatic.

    Now restart Windows Update.  Do NOT restart Windows.   Be very, very sick, it will probably take a while.

  • A problem with cc libraries "the file does not exist, you may not, or the file may be in use by another application".

    I'm working on our catalogue on INDesign CC 2015, I have a links to my libraries, I worked every day without any problem. I work on a Mac and Win system, I put the file on my disk hard or on files of cc.

    2 days ago, I opened the file and as a result with any missed links, when I tried to re-link on my library the program shown Indesign files missed this message "the file does not exist, you may not, or the file may be in use by another application", I contacted Italian cat Adobe they suggested me to change the name of the file I did but nothing happened, they suggested to create a new owner of the computer, but it did not work because I work within a team and the file is opened to others of collaboration. I have 333 links so what I shell do? Please help me, I have to finish this work, we need print it out as soon as possible.

    I had this problem after an Indesign file that we've been working on the opening of my colleague. She has made a few changes and then when I went back to work on the file of the library of all the links were broken and I had him "you don't have to leave."

    I've corrected the problems by opening Illustrator and rename the library. InDesign revived and everything from the library was connected properly.

  • Windows Update necessary Live now does not work

    I signed out of Messenger and obliged to update Windows Live to reconnect. From past experience, it's something I dread and avoid. Now a day later, it is not connect to Windows Live at all, just as I feared. He offered to trouble shoot, but IM just turns and says connection, but does not work. I need a solution.

    You will find support for Windows Live Messenger in these forums: http://windowslivehelp.com/forums.aspx?productid=2 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

Maybe you are looking for

  • a fly inside my macbook 12 "screen

    Dear support team, in fact I bought a new Macbook 12 inch 2 months there are Saudi Arabia, but today I was working on it and suddenly I saw a small fly, just walk inside the screen, at the beginning I tried to touch but actually he pressed one died i

  • Strange delay on starting an exe with DAQmx

    I see a very strange delay when launching a program that loads a LabVIEW generated DLL that uses DAQmx. I also see the same thing on a LabVIEW EXE and maybe on a loading a LabVIEW VI that calls the DLL LabVIEW. The funniest, it is this delay only occ

  • Computer updates Cause either BSOD start or reboot continuously

    Hello My problem occurs when I try to update my computer by using Windows Update.  The updates will download and install problem, but when I restart the computer as needed, things start to go wrong.  The first time I tried to update my computer, the

  • Creating CD Inserts using jpg photos.

    I tried to close this request, but found it difficult. If I am wrong, please forgive me. I am trying to create a few relatively simple inserts for a CD Jewel box.  I'm not too bothered about the circular for the moment, all I'm really bothered on the

  • How to automatically complete a transitional according to the value of another attribute when attribute line is questioned in the VO?

    Hello worldThe task seems simple enough, but I have not found a way to populate an attribute transitional according to the value of another attribute when the line is queried. What is the best way to achieve this?Thank you.James