WINDOWS UPDATE 'change settings '.

Similar Questions

• Updates to Windows 8 - "Configuration of the Windows updates, changes in restoration failure"

  Hello

  Recently I finally got my laptop back from repairs after 6 weeks. Now, it is in a 'clean' State (aka factory settins).

  I wanted to get to 8.1 Windows as soon as possible, but for this I need to be on the latest version of Windows 8.

  So I then try to run "Windows Update" and let it install all updates recommended. He manages to download all updates,

  and then he tries to configure these. About 98% or 99%, it gives the following message:

  'Configuration of the Windows updates, changes back failure'

  It then goes in an infinite loop constantly, he ran for hours and hours without having passed this screen.

  So far, the only solution is to reset it to factory settings, which brings me to the point before that I try to update, so it is not move me.

  I've tried so far, but no luck what follows:

  • http://support.Microsoft.com/kb/949358/en-us
  • http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_update/failure-configuring-Windows-updates-reverting/16219e5c-564b-4310-9f68-c9d595bb4cbe?page=1
  • http://support.Microsoft.com/kb/971058

  None of them has worked so far.

  To be clear:

  It is an OEM license. This doesn't mean no DISC, nor any ISO/Exe could work that they do not accept the product key.

  Many other people have the same problem.

  Please, I'm at a loss to date.

  Yours Sincerely,

  Leon

  Hi all

  Seems that I myself have found a potential workaround.

  Install only the KB2871389 allowed me to grab the download of Windows the Windows store 8.1.

  Then, I could install Windows 8.1 without a hitch and it normally seems using Windows Updater runs from there on.

  It is not yet a waterproof solution to water / final of 100%, but it seems to work for me.

  I hope this will help someone else with the same problem!

  Yours Sincerely,

  Leon

• Error message "failure configuration windows updates, changes in recovery, do not turn off computer.

  I tried to update my laptop with windows updates and an error message "failure windows updates, changes configuration recovery, stop computer" has been there for 20 hours and nothing happens. I can't get rid of this message despite the closure of the laptop for 2 hours and take out the battery. How can I get out of this perpetual loop please?

  I have windows 8.

  [Original title: Windows updates]

  Use any method is needed to access Advanced Startup Options in Windows 8 or 10 including if necessary to the installation media to create for Windows - 8.1 help Windows to start in console repair on the second screen.

  Startup options run the system restore which is the first line of defense and still has a Restore Point before installing the updates.

  If it does not try to repair the startup or as a last resort a refreshment or a Reset.

• Update Windows Installer KB3002885 (and later KB3000061) causes "Failure Configuring Windows Updates, changes of restoration"

  I manually ran Windows Update for about 22 updates including KB3002885 (KB3000061 is not included at this time).  It resulted in "Failure Configuring Windows Updates, changes of recovery".

  Measures taken (without the fix):

  -Reboot

  -Restart in Boot Clean with Services MS no disabled state

  -Updated Troubleshotter

  -System Restore (3 weeks)

  -DISM.exe / Online/Cleanup-image /Restorehealth

  I started installing updates a little at a time and was able to install all the updates about 22 except KB3002885, which always causes the problem 'failure configuration... '. ».

  Updates at this point (November 14, 2014) identified KB3000061.  When update was executed for this update by itself it also caused the problem of the "default configuration... '. ».

  Updates about 22 that have been installed successfully some of them were: KB3000853, KB3004150, KB3003057, KB2978121 and KB2972101.  A more complete list is available if it is useful.

  Windows 8 Pro 64 bit w / Media Center

  Norton Security Suite

  THAT IS TO SAY 10.0.9200.17148

  Worm update: 10.0.22

  Perhaps relevant: I could never update this computer Windows 8.1 in 5 or 6 attempts over a period of 6 months.  Always comes back to the previously installed Windows 8.

  Otherwise, my computer works without other unusual problems.

  Hi Brad,

  Thank you for your response.

  For problems with the upgrade to Windows 8.1, I suggest you refer to the suggestion of Madeni K N replied on 8 January 2014.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-windows_install/error-0xc1900101-0x40017-when-installing-Windows/8c893ae6-0e9b-4b7d-a647-b9065099efd6?page=1&TM=1389602587060

  For more information, you can check the link below.

  Update to Windows 8.1 of Windows 8.

  http://Windows.Microsoft.com/en-us/Windows-8/update-from-Windows-8-tutorial

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Failure of windows updates changes to recovery (using Windows 8). Turn a computer off

  I did a refresh with Acer laptop and lost everything. RELOADED Office 2013 and some applications after if and it seemed to work.

  I went to then turn off the laptop and he tried to update about 72 updates. After 30 minutes, the message "preparation set up windows" do not turn off computer. When he tries to restart, the message "failure configuration windows update changes back? rises.

  He continues to do in cycles?

  Help

  JOhn

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

  You need to disconnect all your removable media to the computer, such as removable disks (Blu - ray disc, DVD, CD), the memory cards (CompactFlash, Secure Digital card, Memory Stick card), and USB flash drives.
  These removable media can cause this problem during the restart of Windows.

  or

  System restore - Note if your computer is not configured to start from a CD or a DVD, or if Windows was preinstalled on your computer without the CD or DVD, see the documentation that came with the computer for instruction about how to continue, or go to the next method.

• I use vista home premium.i am the only user. In windows update, change the settings, I noticed information as "some settings are managed by your system administrator" under updates important, I can not access or change the settings.

  recently, I tried to change the reg key by going to "HKEY_LOCAL_MACHINE\SOFTWARE\POLICIES\MICROSOFT\WINDOWS\WINDOWS UPDATE\AU" in the right panel, I changed my reg AUoptions value to 0.

  I'm using norton 360 (ver 2.5.0.5) .no other norton is installed.my subscription will be emds after 865 days.
  
  UH - huh. You have 2¼ ~ years remaining on an N360 2009 subscription. I see.

  In this case, the Symantec Support should be able to help you eliminate the hijackware infection which is causing your problem.

  Good luck!

• default in windows updates changes to return

  I have an acer aspire 5534-1121, I tried to update so I can get windows 10

  Well last night I managed to do so, download and install updates 246 but this morning when I turned it back on it said failure to configuration of the windows updates reverting changes so if any body could help im still in need lol

  OT:

  Cannot install updates windows 7

  Well I got mine to work finally download bing and make your browser default... then try to install

• "Unable to configure windows update, changes the way back" takes too long...

  My PC just newly formatted and now I can see a problem when I turn it off, he just starts to day and after that it fails... I'm worried about what it takes too long... from 10:00 until 16:00? I read an article on them, she'll just take up to 20-30 minutes, but watch?

  Is there something I can do? Can normally on my return from PC? or what I need to reformat?

  Hi Andrei,

  Thanks for posting your query in Microsoft Community.

  I understand your concern, and we as a community will try to help you in the best possible way we can.

  Here are solutions to some common problems with installing updates. You might be able to fix some problems automatically by running the Windows Update Troubleshooter.

  I suggest you check out the link below and check if it helps.

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  https://support.Microsoft.com/en-us/KB/949358

  Hope the information helps, if you have any additional questions, feel free to post. We are here to help you.

  Kind regards

  Guru Kiran

• Failure to configure Windows updates, changes to restore, do not turn off your computer.

  I had this problem for about 3 hours now.

  I have a laptop called Lenovo G580, before it all went past, he had to restart while I was navigating apps send me 14 minutes to prepare.

  And then it goes up to (15%)? Then gave me the problem "configuration of the windows updates failed, restore changes. Do not turn off your computer "

  It took a while, so I had to turn it off, but he returned to the screen, same problem all the time. It does change a bit.

  It restarted once but it comes back to the same problem

  I'm not sure what I can do, I just leave and wait until the early morning hours or y at - it a specific solution for this or anything like that?

  Help please!

  Start here: http://support.microsoft.com/kb/949358

• I'm getting 'Failure Configuring Windows Updates, changes of restoration' by updating windows.

  It was the first time that I am trying to update my laptop of Lenovo G500s which is come with 8 windows pre installed, before installing the updates, I have restored the laptop if you default factory using Lenovo a recovery key. While the updates are being installed I received a message 'Fail configuration Windows updates reverting changes'. It lasted for an hour. When I tried to install updates again the same message appeared. My laptop came pre-installed with Nitro Pdf 8 and Mcafee Internet Security, so I have even uninstalled them, I also ran Mcafee Consumer Product Removal Tool. But the problem with windows update remained. I then ran the convenience store update Windows that sets these two problems:

  fix windows update fixed the database and repair misconfigured update windows components, but this solves nothing. Later I discovered that although the resolution of update problems show that the problems have been solved but convenience store running immediately shows again the same problems.

  So this time I ran again the recovery system, and immediately after the system recovery windows update of convenience store that showed the problems mentioned above two updates of windows.

  Is it so that means the recovery partition itself contains other problems that my problem would have been solved, what do I do to fix this?

  Take a look on: http://support.microsoft.com/kb/947821/en-us

  ... use the Deployment Image Servicing and Management (DISM) Inbox. Then, install the update or Windows service pack again...

• failure of windows updates changes in recovery

  Said widows update of components need to be repaired.  Help, please!

  Use the following tutorial to reset Windows updates completely and check if it helps:

  Reset Windows updates

  Be sure to run the script as administrator.

• Windows Update changes home page

  I have VISTA. My Yahoo is my home page. 2 days ago, that the pg suddenly changed while I was away from the computer. The menu file/Edit/View/favourites at the top of the pg bar disappeared. My Yahoo logo, who was also at the top of the pg that I used to open additional windows have also disappeared. I tried to find help on Google, other sites. Only info I found indicated that Internet Explorer 7 now hide this menu bar. I don't know how to find out what version of IE I have.

  I managed to get the back bar menu (no idea or how I did in fact). The logo of Yahoo, I used to open windows to the addl is still missing. The homepage has now 2 gold stars above the pg who will open a list of favorites to the left of the pg that I don't like because then there's no room to see the rt page. I find the Windows constant updates of the circumstances aggravating and annoying & sometimes Cancel when the window appears. I don't know if this problem was a result of an update or not, since I wasn't on the computer at the same time.

  loricherokee, it seems that you have updated your browser to a newer version, it is a very important and not beneficial because it gives you a stable and more secure application for your internet browsing. You might have had a Yahoo toolbar program installed and that's what you're like the yahoo logo, referring to East - this exact? If so, you can go on yahoo and acquire again.

  For the menu bar, simply press the ALT on your keyboard to see. You can then use the Favorites option which is similar to your old way (I assume you were using before IE6), or you can always together favorite button to close the column which is located on the left.

  To set your home page you can click on tools, Options and in the general, either type the link to your home page or click use current to set the page your on your homepage.

  Please visit the following page for more information on Internet Explorer 7, click Take a Tour on the right.
  http://www.Microsoft.com/Windows/products/winfamily/ie/default.mspx Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to access windows update settings, message, some settings are managed by your system administrator. »

  Original title: unable to automatically update important updates.

  There is no error message when I open Control Panel > system and security > Windows Update > change settings.

  On this page, that I can't even select or choose other important updates options.

  In addition, on top of the same page, there is information highlighted: "some settings are managed by your system administrator."

  However, I have a personal laptop at home and use the laptop as administrator.

  I already tried troubleshooting, but it was useless for this problem.

  Hi Said,

  It seems that you use Windows 8. You will not be able to access the Group Policy Editor (gpedit.msc) If you use Windows 8. Group Policy Editor can have access on Windows 8 Pro/Enterprise edition of Windows 8.

  Have you tried the other suggestions contained in my previous post? security software i.e. un-installing third if installed computer and to access the windows update settings by enabling the built-in Windows administrator account.

  If you have tried the steps above, please answer us with results to help you further.

• Configuration failure update changes back windows

  Just today, I was on my windows high tower 8 ASUS) that worked very well until I noticed this message saying that the computer will restart soon to update so I clicked on the update and restart for all has updated but when I finally thought he would have started working, he says "failure in windows update changes recovery off not your computer" honestly I don't know what to do because I just got this computer as a week ago. I can't restart or do something for the computer, he's stuck on this message. At one point he did stop saying could not configure windows update but two ways it continues to flow to the same thing. Can someone please help me, I tried everything but nothing works. !

  PLEASE HELP ME!

  Start here: http://support.microsoft.com/kb/949358

• Windows Update is make my old windows of 15 years

  Among the recent updates from Windows Update changes customization on my windows color and appearance settings to make them look like something Windows 3.1, 15 years ago.  When I try to change the windows color and appearance it is has only a few basic choices, each of them really old school.  I had to perform system recover to get rid of this terrible regime of color and my windows back to the original appearance of Windows Vista and have now disabled automatic updates because the new (old) color palette keep spend my windows are sticky and makes me crazy.  Anyone know why this is happening or what specific update is the cause and how can I stop from occurring during the installation always important updates by using Windows Update?

  That's the problem with Vista.

  Install updates, when you restart and the office is missing "aero", comes immediately restart and things should be back to normal.

  TaurArian [MVP] 2005-2011 - Update Services