Windows Update could not be installed (KB2619340, KB2628259)

Windows Update Failed to Install, had many necessary updates and have gone through almost all (broken them so I could see what and wouldn't install)

All EXCEPT 2 which are - security update for Windows XP Edition Media Center Edition 2005 Update Rollup 2 X 86 (KB2619340) and the security update for Windows XP Edition Media Center Edition 2005 Update Rollup 2 X 86 (KB2628259)

These 2 won't work, start then fail... ???

Hi JackPereira,

·         Did you do changes on the computer before the show?

·         You get the error message?

·         You are able to install other updates successfully?

Follow these methods.

Method 1: Temporarily disable the security software.

Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.

Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

(a) click Start, run.

(b) type msconfigand click OK.

(c) the System Configuration Utility dialog box appears.

(d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

(e) when you are prompted, click restart to restart the computer.

Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

http://www.Microsoft.com/downloads/en/default.aspx

Method 4: Follow the steps in the article.

How to reset the Windows Update components?

You cannot install some programs or updates

Tags: Windows

Similar Questions

  • Windows Update could not be installed due to the error 2149842967 (KB958559-x 86.msu)

    Hello
    I am trying to install Windows Virtual PC and Windows XP mode on my computer toshiba laptop. The compatibility tool h/w PC said that my PC is h/w support, assisted virtualization (BIOS and processor support for virtualization extensions).

    I installed Windows XP Mode.

    I am trying to install Windows Virtual PC on my Tablet RTM of Windows 7 Enterprise Edition 32 bit and it fails with below:
    Windows Update could not be installed due to the error 2149842967 "' (command line:""C:\WINDOWS\system32\wusa.exe" "C:\Users\vishalt\Downloads\Windows6.1-KB958559-x86.msu" ")

    I tried several options suggested as
    (a) restarts - did not work
    (b) netstop wuauserv, wicks, rename the softwaredistributionfolder, netstart these services (the two) and try windows complete update - windows update has started but I still couldn't install the KB958559
    (c) try cmdprompt in a high of UAC cmd window.

    I was wondering if there is something else that needs to be done to install this package KB.

    Thanks in advance
    Vishal-

    ... The link for Windows Module game and the registry size limit could not be tried because the links on these threads do not seem to work.

    I know. You will see that I asked a moderator to post a valid link for this thread.

    Have you seen http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/61e16760-a500-481e-a90c-9b933f0fced8 ?

    I'll keep you posted if I hear anything new. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Windows updates could not be installed error 80200053 codes & FFFFFFFE 80070570,.

    When I run the update the files are downloaded and Setup starts, the message of the screen then indicates that updates could not be installed error code 80200053 & FFFFFFFE 80070570,.

    0 X 80070570 - ERROR_FILE_CORRUPT
    The file or directory is corrupted and unreadable.

    Also the error when you install an update for Windows: "error Code FFFFFFFE.
    http://support.Microsoft.com/kb/2525311

    Can also apply to Vista

    This problem can occur if the system is infected with a malware (malicious software).

  • Windows 10 could not be installed-how remove this message from my first screen update?

    The deadline passed free installation. Everytime I open Windows Update (in Win7) I get no updates to accept or decline. Instead, I see a update initial screen that says "Windows 10 could not be installed."  How can I get rid of this message and feedback Windows Update for its normal operation and display, now that the thrust of Win10's past?

    I had the same problem. Go into the registry and remove the key from 'Dismantling' at the following location fixes the problem.

    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\OSUpgrade\Rollback

  • Windows Update still says "Windows 10 could not be installed"

    This is a supplementary question of "W - 7 portable is still trying to move to W - 10.

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/w-7-laptop-is-still-trying-to-move-to-w-10/0c0f4b6f-A269-4e04-bc9e-c18a0b6c8078

    Canadian technology has given me the help I needed to get Windows Update, run again, but remains a problem. Even after the download and installation of updates today, Windows Update always starts with "Windows 10 could not be installed" with the error 80004004-40019. Is it going to annoy my client forever or there at - there a way to reset Windows Update in order to start to show the previous screen of the remaining updates?

    And to make the situation quite clear, the client never asked for Windows 10. His anti-virus caused all coming to a sudden stop (long story), which was actually a good thing because Windows 10 could not settle via deceptive tactics of Microsoft. I manually uninstalled all updates of Windows 10.

    Suggest:

    1. Install the GWX Control Panel and use it to stop the thing Win10
    2. Set Windows Update to NEVER, and then you take responsibility and control to manage the process.
  • Update Windows 10 could not be installed

    Windows 10 could not be installed and displays the error code: 80240031. Download is 100% and the error message shows. Please someone solve this problem.

    Thank you

    Review:

    Retry the upgrade manually:

    Option 1:

    Download the media creation tool

    Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

    Note: How to check if you are downloaded or installed the update Windows 10 November

    How to create an ISO or USB drive.

    Select upgrade this PC now and then click Next

    Option 2:

    Task of pre-required

    When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

    then

    then

    • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
    • Reboot several times, and then try again.
    • Disable the general USB peripherals (for example - smart card reader).
    • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
    • Perform a clean boot, restart, and then try again.
    • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
    • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
    • If this does not work, try using the. ISO file to upgrade if possible.
    • If you are connected to a domain, go to a local account.
    • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
  • Update could not be installed

    I started getting this message:

    "The update could not be installed. Please make sure that there is no other copy of Thunderbird running on your computer and then restart Thunderbird to try again. »

    No other version of Thunderbird is running, and I've restarted before I tried again. How can I solve the problem? I am running Windows XP. Went from about two weeks that I can remember.

    Thanks for any help.

    Download and install from getthunderbird.com

    Weird issues with XP are becoming more common, it gets more support. A relocation will modernize you without problems.

  • Some updates could not be installed: failure on the following security updates - KB974811 KB974556

    Please help me solve this problem.  I have automatic updates set to say "updates are ready for your computer.  Click here to see these updates'; Here is the little yellow icon in the system tray low to the right of my screen.  What happens when I click on this icon is usually I then click 'express install' (and non-personalized) and then press "install".

    My computer sometimes slows down a bit that it downloads / installs these updates and which can be quite a pain in the thigh because it effects everything that I'm working at the moment, and of course because you have to restart the computer.  I have external hard drives 4 or 5 so I to sequentially turn them off one at a time by ejecting them, turn off the computer and then start it back up and restart the hard drives.

    In any case - I can never remember to "SOME UPDATES COULD NOT BE INSTALLED the SCREEN" so I'm at a loss to know what to do.  My computer is perpetually slow because the small yellow Update icon sits in the systray continually trying to draw attention to me and when I do the same thing continues to be time and again - failure!   I tried closing down my antivirus and windows firewall, but nothing helped.

    your help would be much appreciated, either tell me how these updates to get the update of my systray icon, or to get updates of pit.

    According to belarc Advisor - I am running:

    Windows XP Media Center Edition Service Pack 2 (build 2600)
    3.00 gigahertz Intel Pentium 4
    cache of 16 kilobytes main memory
    secondary memory 2048 k-cached

    9 of Avira antivirus
    SUPERAntiSpyware (although it is installation not not at the auto of the msconfig, so its off to the update)

    Thank you!!

    Hello

    Try this 1st to see if it helps, and it should:

    Description of the Patch registration cleanup tool
    http://support.Microsoft.com/kb/976220/

    ------------------------------------------------------

    If necessary :

    Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
    or the update itself - double click a view more information (or click top then discovers on the right)

    Those who will take you to a page where you can download the update.

    Or go here and the KBxxxxxx number to download it.

    Download Center - mount the KBxxxxxx.

    Microsoft Download Center
    http://www.Microsoft.com/downloads/en/default.aspx

    Download - SAVE - go to where you put them - click on - RUN AS ADMIN

    Then you can right click on the update in the updates Windows and HIDE.

    If you get an error Installer install this version:

    Windows install 4.5 Redistributable
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

    ----------------------------------------------------

    Then run this:

    How to reset the Windows Update components? -a Mr Fixit
    http://support.Microsoft.com/kb/971058

    Description of the system for Windows Vista, Windows Server 2008, update tool and
    for Windows 7
    http://support.Microsoft.com/kb/947821

    ------------------------------------------------------------
    Because these are all Office updates you might get more information if necessary in the Agency of those groups that
    may have experienced the same problem.

    Office newsgroups
    http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

    Microsoft.public.office.misc discussions
    http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

    ------------------------------------------------------------

    If necessary you can incident free get reports however the above should take care of it for you.

    Windows updates - free Incident report

    Go here and click on-> Windows Update fails while searching, downloading or installation of updates
    http://support.Microsoft.com/GP/wusupport#tab3

    The security updates, you can get free support Incident report
    http://www.Microsoft.com/protect/resources/support.aspx

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • updates could not be installed

    I have for 2 months had the yellow shield on my Deskbar. Automatic updates are enabled, but I get the message some updates could not be installed. This is the KB 978551, 973443 Ko, Ko 973475, 975051 KB and KB 976882.
    I am running windows XP and the problem of update is more a nuisance than anything else, but I want to solve it.
    Any help would be welcome.
    Steve

    Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Why KB2518864 update could not be installed?

    Auto update installed MS today included KB2518864. After the installation has been advised of that kb2518864, an update of branch for .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XPx86, could not be installed.

    Hi Dave,.

    ·         What is the error it fails with?

    Try the following:

    Step 1: Locate the installation error code.

    To do this, follow these steps:

    a. click Start, click all programsand then click Windows Update or Microsoft Update.

    b. on the Windows Update Web site or on the Microsoft Update Web site, click view update history. A window opens that displays the updates that have been installed or that have failed to install on the computer.

    (c) in the State of this window column, find the update failed to install and then click on the red X. A new window opens that displays the installation error code.

    d. Note the error number.

    Step 2: Reset the Windows Update components, and then install the update. Visit the following link and click on Fixit.

    How to reset the Windows Update components?

  • cannot install update KB2481109, error "some updates could not be installed.

    Original title: update Windows XP Pro KB2481109.

    My computer is constantly requiring an 'important' update and it is still KB2481109, but it's always with: "some updates could not be installed.  I just spent my ware protection to MS Security Essentials, then have it set it to scan any and all the weeks do a full Scan rather than simply a
    A quick.  I downloaded MS Fix - It and whenever I ask him to check the Windows updates, it is said that Windows Update needs to be repaired, goes through the process and says it's fixed, but still it will not load.

    The diagnostic report detailed shows like questions: by default Windows Update of data locations have changed but then shows repaired; also shows: one or more Windows Update are configured incorrectly then that repaired watch.

    Is there someone who can help out me?  This is probably an easy question for someone, but I have no idea and looked at different sites for help and nothing seems to work.

    Hello

    1. what fixit did you run?

    2. you remember to make changes to the computer before this problem?

    Follow the steps mentioned below and check.

    Method 1: See the article and run the Fixit to reset Windows Update components.
    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058
    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    How to back up and restore the registry in Windows
     http://support.Microsoft.com/kb/322756

    Method 2: You can temporarily disable your antivirus and then try to download the update.
    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 3: You can also read the following article and check.

    You cannot install some programs or updates
    http://support.Microsoft.com/kb/822798

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    How to back up and restore the registry in Windows
     http://support.Microsoft.com/kb/322756

    Method 4: You manually download the security update.
    Update security for Windows XP (KB2481109)
    http://www.Microsoft.com/download/en/details.aspx?ID=11625

    Reference: How to solve the common Windows Update, Microsoft Update and Windows Server Update Services installation issues
    http://support.Microsoft.com/kb/906602

  • Start Firefox and the message "the update could not be installed. Please make sure that there is no other copy of Firefox running on your computer and then re - restart Firefox, but I do not have other copies running.

    Launch of Firefox & message says update could not be installed. Check no other copy being run, but no don't

    Upgrade your browser Firefox 8 and check

  • "The update could not be installed." What should I do?

    Whenever Firefox try to update I get a message that says "the update could not be installed. Please make sure that there is no other copy of Firefox running on your computer, etc... "The task manager says there is no other copy of Firefox running, and there are not yet all copies of Firefox running on the anywhere network. When I click on X or OK it just runs through the same cycle and I get the same message. This happens to every update until I have download the new version and install it on top of the current installation. I continue to wait for the bug with the next update, but he continues to be. How to stop this behavior, or can I just give up on Firefox and the use of Chrome or something? It is becoming a major pain in the neck.

    See http://kb.mozillazine.org/Software_Update (Software Update doesn't work does not correctly)

    Delete the files in the folder updates\0 and updates:

    Vista/Windows7:
    C:\Users\ < user > \AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
    (%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox\updates)

    Do a clean reinstall and download a new copy of Firefox since http://www.mozilla.com/firefox/all.html and save the file to the desktop.

    Uninstall your current version of Firefox and remove the Firefox program folder before installing this copy of the Firefox installer.

    Do not remove personal data during the uninstallation.

    It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

    You can skip the step to create a new profile, which is not required on this issue.

    See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • __Certains updates could not be installed. When I click on yellow shield.

    Some updates could not be installed. Update of security for Win XP (KB973869).
    What it means. Thank you.

    I finally got fed up with the constant reminders to install the updates so I uninstalled Office 2003, rebooted and reinstalled.

    Updates install now without problem.

    All fixed.

    I think there should be an easier way to solve this problem.

  • Windows Update could not produce the result page?

    Windows Update could not produce the result page.

    Hi RobertRaney,

    1. you receive an error message when you open Windows Update?

    2. have you done any hardware changes or software on your computer before this problem?

    You can follow this link & check if the problem persists:

    How to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation

    Hope the helps of information.

Maybe you are looking for

  • Problem with refresh PDFKit full screen

    I do a lot of presentations in PDF format (they are usually created with LaTeX, but I as explained below, this detail has nothing to do with the problem). Very often a slide appears in increments - think of several chips which are revealed one by one

  • which version of fiefox use for mac 10.1.5? AND WHERE CAN I FIND THE DOWNLOAD LINK APPROPRIATE PLEASE AND THANK YOU... DAVE

    I REALLY NEED A BROWSER OF DESCENT FOR MY OLDER IMAC WITH LIMITED HARD DRIVE SPACE. CAN SOMEONE HELP ME AS MY BROWSER (1.7.13) NETSCAPE STARTS TO MESS UP A LITTLE BIT. Thank you!!

  • iPhone 4S syncs not on iTunes

    I have an iPhone 4S which I inherited from my son.  I would like to sync the iPhone to my MacBook (OS X 10.6.8) 2.1 with iTunes 11.4, but when I plug my iPhone into the MacBook SB, I get a notification that I have to update my iTunes to the latest ve

  • LDAP on DoD Server?

    Get this, I have just completed a new facility for the Mavericks on a Mac Pro - 4.1. No more than hours, watching traffic connects my network firewall and what do I see? The new facility tries several connections to LDAP (tcp/389) on a few servers Do

  • SOS shows on my blackberry 9300 phone is frozen

    SOS shows in the right corner of my blackberry 9300 phone is frozen track bar won't move at all