Windows Update does not detect internet connetion or config. Cannot download updates

Similar Questions

• Windows 7 does not detect not USB flash drive

  Hi, any help much appreciated on this. Windows 7 does not detect USB flash drives on my laptop. I know that readers of work on other computers and all the USB ports. He does not play sound when plugged in the first time and does not anywhere on my computer. Any ideas? Thanks in advance

  Assuming that you have several disks that work on other computers...

  If you have tried several USB drives on the same port

  AND

  This port does not recognize the USB device plugged in, while the port is not operational.

  IF

  All ports respond in the same way

  THEN

  You don't have either not installed the correct drivers

  OR they did not physically.

• Windows 7 does not detect multiple external hard drives

  I recently bought a HP Pavilion laptop to 7 Home Premium. I have two 500 GB external hard drives. When I connect them individually to the system, they are recognized and I can copy files to and from these External Drives. But when I try to connect both at the same time, Windows 7 does not detect the drive I connect then. Any help is greatly appreciated.

  If the disks are powered by the USB bus and do not have their own external power supply the problem is that the laptop does not provide sufficient USB power to control both.

  The USB specification, is that each port should provide 500mA at 5V. To keep their batteries, laptops usually provide 500mA to share between all available ports. If you need to use several USB devices with significant power, you must either externally powered USB hub or to provide the devices with their own power supply to cutting.

• Windows 7 does not detect not PnP monitor

  Windows 7 does not detect a PnP (Samsung 2220wm) monitor when the monitor is connected through a KVM switch. Therefore, I can't set the correct screen resolution. The monitor is correctly detected when connected directly to the pc.

  This just started recently. Before that the monitor has been correctly detected, even through the KVM switch.

  Nothing installed that I remember. I'll contact Samsung - there have been similar problems with their monitors.

• Windows XP does not detect any internet at all despite the computer with the modem to work.

  I recently installed Windows XP Professional on my new iMac via bootcamp.  While Windows itself works fine, it won't connect to internet at all.  Despite being connected to a modem ADSL via a Ethernet cable, and also have wireless internet, Windows does not detect any signal.  On the internet in the Control Panel, all connections page that appears is "1394 connection" under the heading "LAN or Internet high speed."  I tried several times to put in place a new internet connection through the Setup Wizard and everytime, no internet is detected.

  I know that the modem works because all the other computers in my house are fine online, including on the side of Mac of the iMac.  If anyone has an idea as to how I should resolve this problem, your help would be greatly appreciated!

  Thank you

  Daniel

  Moreover, these are things I've already tried:

  I've tried to manually and automatically set up an internet connection
  I spoke with my ISP, the modem works fine
  I have re-partitioned the hard drive and reinstalled XP

  The "1394 connection" is the IEEE 1394 (FireWire) from your computer.  There should be cable system and under the heading wireless connections "LAN or Internet high speed."   There is no need to run the Network Setup Wizard or set up a new connection.

  Open the Device Manager (Start > run > devmgmt.msc ) and go to the network adapters section.  You may need to install the drivers for them.

• Windows 7 does not detect external monitor!

  Hi I have a huge dilemma!

  My laptop does not recognize the external monitor. Earlier in the day, he detected the external monitor and perfectly well worked through to extend, in doubles, you name it. However, after restarting my computer, I was unable to get the external display to be recognized...

  I use a laptop Lenovo y470 and nvidia gt 550 m 64-bit. I've updated the grahpics card but in vain...

  The way I have it plugged into the external monitor is using a hdmi cable to connect the laptop to a monitor for a DVI-HDMI adapter. Basically, the dvi port became a port hdmi with this adapter.  its dvi - d.

  I think that restarting the computer developed a few updates and the graphics card only connects via VGA or HDMI and DVI not? I'm not sure... I'd love any idea of a solution.

  Hello

  If you do not see an option named multiple displays in your display settings, then Windows isn't detecting a second monitor plugged into your desktop computer. Or else, it does not detect an external monitor plugged into your laptop. When Windows detects this monitor, it will appear in the drop-down list next to the screen. If you do not see that what listed there, try click on Detect.

  Make sure that the monitor you want to extend your desktop is turned on and plugged the correct video port on your computer. You may also need to select the correct source labeled on the controls of your monitor to ensure that the monitor is using the correct video port. For more information, consult the manual of your monitor or go to the manufacturer's Web site.

  Method 1:

  For more details, see the following articles:

  Work and play better with multiple monitors

  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  Move windows between multiple monitors

  http://Windows.Microsoft.com/en-us/Windows7/move-Windows-between-multiple-monitors

  Method 2:

  I suggest you to check the history of update for the recently installed updates.

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  Method 3:

  I suggest to see the link and try to run the troubleshooter and check if it helps:

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 4:

  I suggest that you try to do a system restore and check whether the problem is resolved.

  In Windows 7 system restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

• PC Windows XP does not detect my 1 GB SD card when I put it in the slot, but the light

  My PC is running Windows XP Service Pack 3.

  I have several slots for various types of cards and due to have been to a wedding, I need to get the pictures on my camera, I popped the SD card which is a 1 GB Sony Memory Stick PRO Duo in the slot for this card, the light and my mouse flashes everything but nothing happens.

  Can someone please? I can't find the USB cable for the camera

  Thank you very much

  Hello

  (1) have you made changes before the start of this issue?

  (2) using the card reader?

  Method 1: Why does my computer detect my new USB device when I am running Windows XP or Windows Server 2003?

  http://support.Microsoft.com/kb/314634

  Method 2: Windows XP does not recognize a secure digital card when you reinsert it after you remove it

  http://support.Microsoft.com/kb/812661

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756 /) how to back up and restore the registry in Windows

  Method 3: Install the latest drivers from the manufacturer's Web site.

  Also occurs with any other SD card another it is recognized or detected or you can even check if the same SD card becomes recognized or detected on the other computer.

  See also: http://social.technet.microsoft.com/Forums/eu/itproxpsp/thread/103ce9a2-2b5c-4a04-9b9a-eef9ff78dbd3

  Let us know if t his help.

• Windows xp64 does not detect the printer hp laserjet p1102

  Hello

  Windows XP Professional X 64 Edition Version 2003 is installed on my server.  It does not detect the printer HP Laser Jet P1102, it needs of Virtual Port USB 001.  When I connect my printer, Windows does not detect the printer.  I lost the CD for the printer.  When I try to install the printer with drivers downloaded HP, it gets sleep showing message "Connect your USB cable" when it is already connected.

  Also when I try to connect to the printer on my workstation, Windows XP Professional 32-bit Edition, it must be connected, but off, the sharing is lost with other workstations, even if I set the static IP for all.

  Hello

  I suggest you post your query in the TechNet forum. Please post your question in the link for assistance below: http://social.technet.microsoft.com/Forums/en-US/itproxpsp/threads

• Cannot start Windows, Windows Setup does not detect the hard disk, Bootmgr is misiing

  I have a few problems on my laptop [Acer 3810 t]

  -The first problem
  My mobile give me screen "cannot start windows' who have 2 choices: run the Startup Repair tool and boot normally. I chose to fix it, but nothing happens and stuck "starting windows" and gives unmountable boot volume 'blue screen '. the Dungeon of blues screen appear (for laptop is a not restart). So I turned off my phone and turn it back on it. the "could not start" screen again and I chose to start normally. but the result is negative. My portable Dungeon cannot start windows. Because of that I am using the advanced boot option and choose all the boot type such asit cannot load the safemode, last configuration etc, but the result is the same, you cannot start windows. in safe mode, its stuck in loading fileinfo.sys. I do not give up to try again with the advanced boot option. until I have a bad situation. My laptop can only 1 file in safe mode and blues screen do not appear again (my laptop only return at the beginning of start or restart)

  -The second problem
  because it cant solved, I want to reinstall my laptop. My OS is Vista 32 bit (pre-installed). I want to install the new operating system, windows 7. I use Dsik Flash bootable USB to install Windows 7. But in the BIOS, it is detected as a USB HDD. So I set my BIOS to load USB HDD to the first order. the installation can be done, but only until the "start Setup" screen and its deadlock. I have it wait up to an hour, but nothing happens. So I'm going to BIOS, change SATA mode to IDE mode AHCI. Then load the USB and go "installation program start screen. but the new problem is the installation of window does not detect my hard drive. So I can not choose the place to install the operating system. I have to load the driver, but I did not. Again to load the configuration to AHCI and IDE, until I get my HDD can detected in IDE mode. So I think I can move easily, I choose custom installation and choose the hard drive to install the operating system. But unfortunately, at the beginning of the process, after choosing the OS, the Installer gives error if installation location the installation failed. (I forgot the error message)

  -The third problem
  So far, I can't spend 'startup begins' as well in mode IDE and AHCI. Also bootmgr in my hard disk is missing, so I can't go to move the startup repair or the startup option in my HDD as before

  What is the error code that you got with blue screen?

  I think that there is a problem with your drive HARD check that by contacting acer...

• installation of Windows 7 does not detect drivers for 9500S 3ware RAID controller - 4LP

  I've been using 3ware 9500 s - 4lp raid controller without problem on xp64 os.

  I want to upgrade to windows 7, but after installation clean win7 does not detect my readers as unsigned drivers.

  PLEASE HELP ME!

  Please see: Windows 7 Compatibility Center

• XP Mode in Windows 7 does not detect the ATI Radeon graphics card

  Hi, on windows 7, xp (virtual), the system mode does not detect my graphics (ATI Radeon HD4530). This card is indispensable to run a business application (multimedia program). Can you please help me.

  Thank you, Christian.

  * original XP mode with title - __Windows 7 - (virtual) with ATI radeon HD4530__Christian.* graphics card

  Windows XP mode provides a virtual hardware platform to run XP programs.  With the exception of some USB devices, it does not provide a direct access to the hardware on the host computer.

  If you need to use your real graphics hardware in XP you will probably have to put in place a system to dual-boot and boot XP when necessary.

• Computer laptop Windows 7 does not detect my Xbox 360

  Recently, I bought my used console. My laptop's overview of Windows 8 consumers. Although I didn't have the Media Center option, my Xbox could detect and stream my music, videos and photos from my PC. I've recently returned to Windows 7because the license of Windows 8 has been set to expire January 15. Now, for some reason unknown, my Xbox does not detect my PC or my PC detects my Xbox as an Extender in Media center. I tried everything I could think of and the instructions I found on the Xbox site, nothing done. Before I posted this, I also tried things left to people with similar problems in the answers in this forum. I tried manually assign the IP addresses of my two Xbox and PC, disabling my Windows and the firewall of the router, restart Windows Media Player sharing service, allowing the streaming on my Xbox which appeared in my streaming options, disconnect and reconnect my Xbox and PC on my network of countless times and shout and scream about the whole situation.

  I tried not to open the ports because that I have disabled any firewall that I don't see. I have McAfee installed, but my subscription has expired so I uninstalled. I am at a loss for what to do because I tried everything I read and thought. We have 4 PC in our House and everyone but mine my console can detect and disseminate. Three of the four run Windows 7 Home Premium x 64, the 4th with Vista 32 bit. All the computers are on the same network and all. I tried ping my Xbox to my PC and it timed out every time, but my PC does not detect it in a way because it shows in my options on my PC for streaming media. There must be something with my PC and Windows 7 only because like I said before, everything has worked at the time where it ran Windows 8. Anyone can end this madness?

  Never mind. I thought about it. I restarted the SSDP Discovery service that restarted the services necessary to make this work.

• Pavilion X 2 running as Windows 10 does not detect any WiFi networks

  When starting the Tablet this morning, I received a message "not connected - no connection is available. My home network is up, running and accessible by other devices co-located, including the smartphone with which I'm making this post. Troubleshooting of the Internet connection and the network adapter with Windows Network Diagnostics 3.0 gives "no problems found".
  
  Help? Restore Win 8.1?

  Do not take into account. The Tablet has been at the center of an important Windows Update with no noticeable indication (for me). Detection of network resumed work at the end of the update, and this message is sent on the Tablet already affected. Moral: patience.

• Windows Vista does not detect the printer

  had the printer works fine until Windows vista did an update. Now hp poster printer not detected

  Hello

  ·                         try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Windows 7 does not detect my external monitor. Why? How should I do?

  Good, some basic information. The laptop at the origin of the problem is an HP laptop.  In other circumstances, I wouldn't care on this issue. But the screens on both of my computers cell phones don't work (they are Sun and incredibly difficult to see, barely visible) and I use an external monitor so for use.

  In other words, I used.

  I have Windows 7 for one of my laptops, and it is already fully charged. But, I tried to connect my external monitor, it did not work. I tried to use the projection screen, pressing [FN + F4]and pressing on [FN +] other F keys, as well. Of course, I thought it was weird. So I looked for answers on the internet (on my other laptop), nothing works. Most only have problems with the monitor not working not properly; mine is not detected at all. I went to the display settings (have to squint shine with a light and bend my laptop screen in different directions), and it showed only 1 screen, the main screen. I tried to restart, stop, unplug the monitor and in him plugging back and turning the cable around. I know that the problem is not the cable, as I use it right now.

  I also tried updating the drivers, but for one reason, the laptop now refuses to connect to the internet as well. So, now, I have a laptop completely useless with a black screen, and I can't put my files on it because of this black screen. Not that I'd be able to use it for something else, anyway.

  Hello

  Thanks for posting your query in Microsoft Community.

  Have you tried to connect the external monitor to another laptop?

  You can view the following items according to the questions:

  For problems with the monitor not detected
  refer to the suggestions of Geethu B responded requesting 24, 2012

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/second-monitor-not-being-detected-Windows-7/0f8754dd-64da-4B25-aecf-341a19ebf469

  For problems with not able to connect to Internet

  Refer

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-in/Windows/cant-connect-Internet#1TC=Windows-8

  For the black screen of questions, check in safe mode:

  Safe mode starts Windows with a minimal set of drivers and services.

  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  If the computer works fine in safe mode, try the system restore, then check.

  Perform the system restore.

  http://Windows.Microsoft.com/en-in/Windows7/products/features/system-restore

  Note: When you use system restore to restore the computer to a previous state, programs
  and updates that you have installed are removed.

  I hope this helps. Please let us know the results. Feel free to write us again for any help.