Windows Update does not not 4 a security updates do not install

Similar Questions

• Windows XP does not install the automatic updates.

  Original title: kopieerfout

  After several years, my laptop with Windows XP does not install the automatic updates, giving only a mistake:

  "

  ER is een doing opgetreden bij het van het bestand ntoskrnl.exe copying

  Kan het bestand niet naar doelmap copying.

  Everything works OK.

  Thanks for your help

  Everything works OK.

  It seems that it is not... Why Dutch? You use or have the corresponding language version installed?

  Free translation of message:

  "An error occurred during the copy of the file ntoskrnl.exe
  Cannot copy file to destination... »

  Please note that ntoskrnl.exe is a process in the cycle of the initial startup on your computer program.

  Try to load your "last known good configuration".

  The issue is also known to be caused by a short circuit in the ground cable into the keyboard cable. Make sure that it is not the cause of your error by replacing the keyboard with another keyboard or just disconnect the keyboard from the computer. You can also look at your function "Add or remove programs" If KB2686509 <> http://support.microsoft.com/kb/2686509 > is installed.  Install manually if it is not.

  If the above doesn't help, try using the Sfc.exe tool - see here > http://support.microsoft.com/kb/310747

  Or run the Chkdsk tool - see here > http://support.microsoft.com/kb/315265

  If still no luck, you may need to restore the file ntoskrnl. exe as follows:

  1 - insert the Microsoft Windows XP CD. Note: If you have a recovery CD or a restore CD and not a Microsoft Windows XP CD is probably the procedure below does not solve your problem.

  2 - restart the computer and that the computer starts, you should see a message press any key to boot from the CD. When you see this message press any key.

  3. - in the Microsoft Windows XP setup menu, press the R key to enter the recovery console.

  4 - Select the operating system you want to set and enter the administrator password.

  5 - type expand d:\i386\ntoskrnl.ex_ c:\windows\system32

  6. - you will be asked if you want to overwrite the file, type Y and press enter to replace the file.

  7 - type exit to restart the computer.

  Hope this helps - good luck!

• Win 7, stand-alone windows installer does not install the msu downloaded on my HD files.

  I have several MSU files that I downloaded on my computer.

  I click on them and the stand-alone windows installer goes into "searching for updates on this computer".

  2 hours later, still nothing.

  I know that people have problems with the update of win 7... Nothing works.

  So far is just sitting there looking for updates... He ran all night... Nothing... always to research.

  I can not find where Microsoft puts the installed update files... If the software distribution folder, which wiped out during one of my attempts to resolve this problem.

  windows update told me today there were new updates available, and then sit there for 6 hours trying to get them with no result...

  So if I can't even manually install MSU file, what can I do? Try to install the kb3102810 fix

  You can use internet explore and access the catalog M$ and bring the two,.

  That is to say a right click and run as administrator

  

  Then go to the catalog and the top search right for each update and allows them to basket

  http://catalog.update.Microsoft.com/v7/site/install.aspx

• Windows 7 does not install new USB keys

  Hello

  I installed on my Dell Windows 7 Ultimate laptop. Recently (about 2 months now), it has developed a problem where he do not installed the drivers for the new USB hard drives or flash drives. All readers of connect very well without any problems. All new readers appear in Manager under "Other devices" devices with their correct name. For example, my LaCie device appears as "LaCie device".

  I have removed all my USB components in Device Manager and reboot my system. He felt that all USB components correctly but my new readers are still not installed.

  I also deleted the INFCACHE.1 file as recommended by another post but still does not work.

  Any ideas?

  Thank you.

  DJ

  Everyone,

  I fixed the problem myself. I found a link that helped me a lot to resolve. It seems that Windows loses somehow USBSTOR.xxx files in the C:\Windows\INF folder. They are necessary for Windows to hate storage USB devices correctly. You can simply copy them from (C:\Windows\System32\DriverStore\FileRepository\usbstor.inf_x86_neutral_83027f5d5b2468d3) to C:\Windows\INF, and everything seems to work great.

  Link to the site where I got the help of:

  http://www.Uwe-Sieber.de/usbtrouble_e.html

  I used the topic: Vista asks drivers or simply to install a new hardware

  Once you have copied the files, reconnect your USB device and it should find it. If it is not the case, remove it from the Device Manager, remove the device and re - plug in. It should correctly find this time.

  I hope this helps others.

• Comments Windows 7 does not install the network driver?

  Hello.

  I downloaded latest Win7 RC and installed on a virtual machine in VMware workstation. It not installed the virtual NIC driver so I have no internet!

  I googled the problem and it turns out that some people have reported this problem, and it came with a solution which in turn off the virtual machine, remove the network adapter, turn on the virtual machine, turn off again, to add a new and finally turn on the virtual machine - as described in this forum:

  http://social.technet.microsoft.com/Forums/en-US/w7itproinstall/thread/b5843189-d519-4e8a-a4f8-f1e671b341b6.

  I did and I've also updated vmware workstation (I have version 6.5.2 build 156735) and updated tools vmware on windows 7 and nothing worked. I have an another vm with XP and everything goes smoothly with networking and fully operational internet.  I used the win7 help and he pointed out this particular problem: there is no device installed network driver? Any suggestions?

  Each virtual machine can be started by double-clicking its vmx file.

  It is a plain text file. You can open it in every good text editor. Do not use scamblers text such as WORD and nonsense.

  You can compare the vmx file with the list of material that you give to the man behind the counter to your computer-friendly dealer store.

  You can add line at the end of this file - make sure you just you have twice the same line

  ___________________________________

  Description of the vmx settings: http://sanbarrow.com/vmx.html

  VMware-liveCD: http://sanbarrow.com/moa.html

• HP mini 210-1000; Windows xp does not install

  Data sheet:

  HP mini: 210-1000

  Product #: WP055UA #ABA

  Hello

  As stated above, I have a mini HP I had for about a year or more.  It came with windows xp installed on it.  After a while I wanted to try using Ubuntu on it and accidentally deleted windows partition and so any replacement by ubuntu.  Now, I would like to reinstall Windows.  I have a windows xp pro disc to do it with.  Now, I tried to boot from the cd so what ubuntu was installed - didn't work.  Wiped my drive HARD all over and then tried to boot from the cd - did not work.

  I am at a loss what to do.

  This is the message displayed,

  "A problem has been dtected and windows has shut down to prevent damage to your computer.

  If this is the first time you've seen this stop error screen, restart your computer.  If this screen appears again, follow these steps:

  Check for viruses on your computer.  Remove any newly installed hard drives or hard drive controllers.  Check your hard drive to ensure that it is properly configured and completed.  Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

  Technical information:

  "STOP: 0X0000007B (0XF7AC963C, 0XC0000034, 0X00000000, 0X00000000).

  He gave me this message until I deleted Ubuntu as well.  I also did a check of the disk by the BIOS and everything is ok.

  I don't know what else can be done.  Thank you for your time.

  Hello:

  All you need to do is load the SATA ACHI drivers.

  You can add them to this prompt F6 at the beginning of the Windows XP installation routine, or you can their wake in a copy of your XP installation disc.

  Please read this helpful guide on the link below and you will soon be real business.

  Your laptop is the chipset Intel NM10 express read the instructions for it.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/SATA-drivers-for-XP-solution-on-0x0000007B-BSOD/TD-p/114120

  Here are the drivers you need. Download and unpack the second file (32-bit).

  http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=19599&lang=eng&OSVersion=Windows%20XP * & DownloadType=.

  Paul

• Update of Windows XP does not work, error 0 x 80245003. Cannot be updated to SP 3, can't update IE 6 to IE 8. How to solve these problems?

  Update of Windows XP does not work. I tried the correction of the error 0 x 80245003 and nothing has changed. Fix, that it won't work because SP 3 is not installed, because of the Windows Update does not. I try to install SP 3 manually, then downloader windows will not install reference SP 2 must be installed. SP 2 is installed. So I tried several ways to solve this problem, and I keep running into roadblocks of Windows. Help, please.

  Hi my NameJoel,

  See the methods mentioned below and check if that helps.
   
  Method 1:
  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Note: A firewall is software or hardware that checks information coming from the Internet or a network. Then the firewalleither blocks information or allows information to pass to your computer. If the information is blocked or throughdepends spent on your firewall settings. A firewall can prevent malicious software (such as worms) to access your computer through a network or the Internet. A firewall can also help stop your computer from malware sent to other computers. Windows XP, Windows XP Service Pack 2 (SP2) and Windows XP Service Pack 3 (SP3) include firewall software.
   
  See also:
  You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or
  http://support.Microsoft.com/kb/943144
   
  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717
  Note: Disable your antivirus software is not usually recommended, some software antivirus prevents certain system changing files. This can cause the Windows XP SP3 installation failure. To make sure that you manage to install Windows XP SP3, temporarily disable your antivirus software, including any third-party antispyware and firewall program. To do this, right-click on the icon for your antivirus program, and then click on disable. The antivirus program icon typically appears in the bottom right corner of the computer screen.
   
  Important: Make sure that you enable the antivirus software after you install Windows XP SP3.
   
  Hope this information helps.

• KB2572073 this security update does not install

  This security update does not install what is anyone else having the same problem? I install and it says: it is installed and the next time I log in it reappea4s. Very annoying!

  Hi JimWaddell,

  ·         Have you tried the steps in the article of my previous answer?

  If this isn't the case, follow the steps in the article of my previous answer and let us know the results.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

• Windows Update KB953297 (Net Framework 1.1) does not install

  Hello

  Windows Xp Sp3

  Procedure of common windows update wants to install update KB953297 security

  Updated download and inilialises, but refuses to install.

  What's wrong?

  What is the solution?

  Keith Keith

  Thanks Adamjy12345!  Amazing!  After spending a whole day with MS support yesterday, January 27, 2010 and getting nowhere, I followed your suggestion today and it seems that my troubles with the issue of the kb953297 are more.  I just rebooted and checked, and this time I have not asked me to update .net framework (953297 KB).

  I don't I remember exactly what I've done since the shock of seeing "installed successfully" hit me.  However, for others, I say lets find the netfx files after you run the dotnetfx.exe first the search option of windows classic.  Research others (I am running windows XP PRO) does not work, because I believe that it does not immediately again locate files.  Also, I do not see the file named netfx.msi when I did the search.

  Wait now, new information appears: my memory starts to come back, and I think remember me that * NPD1 * successfully completed the second time I tried without me having to tell her where the * netfx files were; so NDP1.sp1 - KB953297 - X 86 .exe found the files there without my help, even though I've never actually seen the netfx.msi file location!  I hope you have the same chance.  Don't forget to run dotnetfx.exe first, then run the NDP*.exe file at least twice, if it doesn't work the first time.  I know it's illogical, but well, these things are too complicated for me to describe with precision.

  p.s., Adam - I don't know how "mark you' but of course you deserve.
  Update - I've tagged you 6 to 7.  Hope it's what you mean. (Jan 28/10 @ 1115hrs.)
  Greetings to all.

• After recent, iPhone, 6, update, Windows, Explorer, does not work, see, iPhone

  I installed the latest update required for my iphone ios 6 a few days ago, and now when I try to download pictures from my iphone to my PC (via USB connection), the PC does not see the iphone.   iTunes sees it yet, but windows Explorer does not work.  It seems that some setting has been broken through the update of ios.  A way to solve this problem?

  Restart the computer and the iPhone. Unlock the iPhone before connecting it to the computer. Any change?

  TT2

• Microsoft Update for hp LaserJet 3015 PCL 5 driver does not install in Windows 7

  I use Windows 7 update.
  Microsoft Update for hp LaserJet 3015 PCL 5 driver does not install. He says 1 optional update is available almost every day, then when I try to install, it does not install and it says that the update is not necessary. Even once when I check updates, it says 1 optional update for the printer is available from Microsoft. And the story continues. I tried to reinstall the optional update, but the same problem persists perennielly

  Is this the driver you are looking for?
  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=503519&prodTypeId=18972&prodSeriesId=503548&swLang=8&TaskID=135&swEnvOID=4062

  Looking for HP for the pilot because it is better to get these live drivers from the manufacturer. TaurArian [MVP] 2005-2010 - Update Services

  No, these aren't the droids, uh, I mean the drivers he was looking for.

  In fact, it's better to get the new drivers from the HP website, you will notice the link you provided that the options only are available for this printer under Windows 7 drivers universal. I regularly have problems with universal drivers and strongly recommend to avoid as much as possible.

  I agree with the question of the original poster, which, after more than two years, remains unanswered by Microsoft. It seems that MS has a driver PCL 5 (not universal) updated specific 3015, but it fails to install the Windows Update control panel. I finally gave up on it, right click on the update and selected the option to hide it from view.

  Why bother with a solution when I use the button "Sweep-It-under-the-carpet" practice of Microsoft?

• Windows Update does not install SP3 on Windows XP Pro computers

  I have about 400 computers running Windows XP SP2 withIE 6.  It is set to automatic updates on installed every day at 03:00.  For some reason, SP3 is installed automatically never.  If I run the windows update manaully, it offers me to install SP3.  Is it normal?

  SP3 does not install automatically. It's like IE8.

  Perhaps this may also be of interest:

  Release notes for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/936929

  TaurArian [MVP] 2005-2010 - Update Services

• My update of Windows media player in windows vista does not play a mkv file.

  * Original title: about file mkv

  My update of Windows media player in windows vista does not play a mkv file, what do I do

  There are solutions out there, depends on how much you trust the software that you download. Here is an example for Windows 8, could work for vista too - make sure you have a full backup and AV before you start :)

  http://www.AddictiveTips.com/Windows-Tips/how-to-play-MKV-files-in-Windows-Media-Player-in-Windows-8/

• I can't get my updates. the Windows Installer does not work how to fix it

  I can't get my updates. and I can not install other programs. the Windows Installer does not work. How can I fix?

  http://support.Microsoft.com/kb/2438651#reso1

  See the above article, I suggest you use not Fixit, but it's your choice.

  For manually fixit it you follow the steps in the resolution.

  fyip

• Windows 10 does not work on my PC, and Windows 7 would not be updated

  I downloaded the Windows 10 Upgrade Wizard for free. However, whenever I run it, the error message appears saying "Windows 10 does not work on this PC", because "the display is not compatible with Windows 10. Check with the manufacturer for support.

  So, I contact the manufacturer of the display. Verified support Office my PC online and found the optional Windows updates 10 have not been installed. I tried to run the update, but the update of Windows crashes to download updates. I also ran a convenience store, but the resolution of the problems also got stuck.

  I would start by reinstalling the video driver

  Completely, remove the current (or software) driver and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

• Windows update downloaded and installed sp1 and sp2. Both show as successful in the history of the update but does not show in 'the computer properties.

  Windows update downloaded and installed sp1 and sp2. Both show as "successful" in the history of the update however my computer properties tab represents OS is Windows Vista Home Premium and shows no indication of SP1 or SP2. Is there a process of 'activation' these? Should not be done automatically? Any help is appreciated!

  Hello

  Thanks for posting the request in the Microsoft Community.

  Method 1:

  I would say as you to see the link to use the System File Checker tool (sfc) to troubleshoot missing or corrupted system files in Windows:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Method 2:

  Step 1:

  I suggest to refer to the article and try to run the system update tool:

  System update scan tool corrects errors of Windows Update in Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  Step 2:

  You can check the link and try to obtain the latest Service Pack for Windows Vista:

  How to obtain the latest Windows Vista service pack

  http://support.Microsoft.com/kb/935791

  Let us know if it helps.