Windows Update does not update available

Similar Questions

• Windows 10 does not work on my PC, and Windows 7 would not be updated

  I downloaded the Windows 10 Upgrade Wizard for free. However, whenever I run it, the error message appears saying "Windows 10 does not work on this PC", because "the display is not compatible with Windows 10. Check with the manufacturer for support.

  So, I contact the manufacturer of the display. Verified support Office my PC online and found the optional Windows updates 10 have not been installed. I tried to run the update, but the update of Windows crashes to download updates. I also ran a convenience store, but the resolution of the problems also got stuck.

  I would start by reinstalling the video driver

  Completely, remove the current (or software) driver and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

• After recent, iPhone, 6, update, Windows, Explorer, does not work, see, iPhone

  I installed the latest update required for my iphone ios 6 a few days ago, and now when I try to download pictures from my iphone to my PC (via USB connection), the PC does not see the iphone.   iTunes sees it yet, but windows Explorer does not work.  It seems that some setting has been broken through the update of ios.  A way to solve this problem?

  Restart the computer and the iPhone. Unlock the iPhone before connecting it to the computer. Any change?

  TT2

• Windows XP does not install the automatic updates.

  Original title: kopieerfout

  After several years, my laptop with Windows XP does not install the automatic updates, giving only a mistake:

  "

  ER is een doing opgetreden bij het van het bestand ntoskrnl.exe copying

  Kan het bestand niet naar doelmap copying.

  Everything works OK.

  Thanks for your help

  Everything works OK.

  It seems that it is not... Why Dutch? You use or have the corresponding language version installed?

  Free translation of message:

  "An error occurred during the copy of the file ntoskrnl.exe
  Cannot copy file to destination... »

  Please note that ntoskrnl.exe is a process in the cycle of the initial startup on your computer program.

  Try to load your "last known good configuration".

  The issue is also known to be caused by a short circuit in the ground cable into the keyboard cable. Make sure that it is not the cause of your error by replacing the keyboard with another keyboard or just disconnect the keyboard from the computer. You can also look at your function "Add or remove programs" If KB2686509 <> http://support.microsoft.com/kb/2686509 > is installed.  Install manually if it is not.

  If the above doesn't help, try using the Sfc.exe tool - see here > http://support.microsoft.com/kb/310747

  Or run the Chkdsk tool - see here > http://support.microsoft.com/kb/315265

  If still no luck, you may need to restore the file ntoskrnl. exe as follows:

  1 - insert the Microsoft Windows XP CD. Note: If you have a recovery CD or a restore CD and not a Microsoft Windows XP CD is probably the procedure below does not solve your problem.

  2 - restart the computer and that the computer starts, you should see a message press any key to boot from the CD. When you see this message press any key.

  3. - in the Microsoft Windows XP setup menu, press the R key to enter the recovery console.

  4 - Select the operating system you want to set and enter the administrator password.

  5 - type expand d:\i386\ntoskrnl.ex_ c:\windows\system32

  6. - you will be asked if you want to overwrite the file, type Y and press enter to replace the file.

  7 - type exit to restart the computer.

  Hope this helps - good luck!

• Update of Windows XP does not work, error 0 x 80245003. Cannot be updated to SP 3, can't update IE 6 to IE 8. How to solve these problems?

  Update of Windows XP does not work. I tried the correction of the error 0 x 80245003 and nothing has changed. Fix, that it won't work because SP 3 is not installed, because of the Windows Update does not. I try to install SP 3 manually, then downloader windows will not install reference SP 2 must be installed. SP 2 is installed. So I tried several ways to solve this problem, and I keep running into roadblocks of Windows. Help, please.

  Hi my NameJoel,

  See the methods mentioned below and check if that helps.
   
  Method 1:
  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Note: A firewall is software or hardware that checks information coming from the Internet or a network. Then the firewalleither blocks information or allows information to pass to your computer. If the information is blocked or throughdepends spent on your firewall settings. A firewall can prevent malicious software (such as worms) to access your computer through a network or the Internet. A firewall can also help stop your computer from malware sent to other computers. Windows XP, Windows XP Service Pack 2 (SP2) and Windows XP Service Pack 3 (SP3) include firewall software.
   
  See also:
  You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or
  http://support.Microsoft.com/kb/943144
   
  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717
  Note: Disable your antivirus software is not usually recommended, some software antivirus prevents certain system changing files. This can cause the Windows XP SP3 installation failure. To make sure that you manage to install Windows XP SP3, temporarily disable your antivirus software, including any third-party antispyware and firewall program. To do this, right-click on the icon for your antivirus program, and then click on disable. The antivirus program icon typically appears in the bottom right corner of the computer screen.
   
  Important: Make sure that you enable the antivirus software after you install Windows XP SP3.
   
  Hope this information helps.

• My update of Windows media player in windows vista does not play a mkv file.

  * Original title: about file mkv

  My update of Windows media player in windows vista does not play a mkv file, what do I do

  There are solutions out there, depends on how much you trust the software that you download. Here is an example for Windows 8, could work for vista too - make sure you have a full backup and AV before you start :)

  http://www.AddictiveTips.com/Windows-Tips/how-to-play-MKV-files-in-Windows-Media-Player-in-Windows-8/

• I can't get my updates. the Windows Installer does not work how to fix it

  I can't get my updates. and I can not install other programs. the Windows Installer does not work. How can I fix?

  http://support.Microsoft.com/kb/2438651#reso1

  See the above article, I suggest you use not Fixit, but it's your choice.

  For manually fixit it you follow the steps in the resolution.

  fyip

• If installation Adobe Acrobat DC Windows install does not update of managed advertised products. At least one characteristic of the product must be installed before applying the update.

  If installation Adobe Acrobat DC Windows install does not update of managed advertised products. At least one characteristic of the product must be installed before applying the update.

  Contact adobe support by clicking on this link then "still need help" as soon as it appears, http://helpx.adobe.com/x-productkb/global/service-ccm.html

• Error updating Windows 10: does not work if the PC is joined to the domain

  My company requires that employees upgrade to Windows 10 before the deadline. When I went to install Windows 10 came an error message that says "Windows 10 does not work on this PC" and then told the user account: this PC is connected to a domain. Contact your system administrator

  Does anyone have an idea how to get around this problem? At least 2 other people in our office have successfully upgraded to Windows 10 without feeling it, and another co-worker gets the same error message.

  This is a screenshot of what happens:

  

  Your best option is to download the ISO and upgrade to a Local account.

  Step 1: How to download official Windows 10 ISO files

  Step 2: how: upgrade from previous versions of Windows using the file ISO for Windows 10

• My Windows Media Player does not open upward when you click it in the list of available programs, nor will any media over the internet using Windows Media does not work

  My Windows Media does not open upward, when you click on Window Media Player in the list of available programs nor play any internet media using the Media window. I have the 110.6002.18311 version. Any help to fix this problem will be appreciated.

  Hello

  You can try to re register the dll files for windows media player and if it helps fix your problem. To do this, please follow the steps below:
  1. Click Start, type cmd in the search box and right-click on cmd.exe, and then click Run as administrator.
  2. At the command prompt, type the following commands and press ENTER after each command:
  regsvr32 vbscript.dll
  regsvr32 jscript.dll
  regsvr32 wmp.dll

• Windows Firewall does not start. Cannot start connection ICS internet sharing service

  Hi Please help, my computer has been infected by a pretty nasty trojan, (MEREDROP) I managed to remove it (and all of its subsequent downloaded files), but it was very difficult. in any case since that my windows firewall does not start. I get the error code. 1075 and the msg (windows cannot start (ICS) internet connection sharing service). I tried to replace registry files, I tried the system restore, I tried to change the permissions, I tried to turn it on manually, I've updated my BITS. Ive also ensured that the dependent services are running. According to my list of component services, they are... Nothing works. I need to format the HD for this problem or is there a standalone windows firewall available for download?

  Thanks for posting. Please note that the use of system restore after infection and removal of malware very probably re-infected your computer. Please follow all instructions on this thread HERE. Let us know the results.

• Windows Vista does not start upward, with success since the closure complete

  Hello world

  I actually had this problem for a long time, but I'm just now to a point where I'm ready to take a lead in fixing it.

  I can't identify when it started, but Windows Vista does not start upward, with success of a full stop. He gets to the screen where, in general, the green bars will travel across the screen, but the green bars will not come. The screen looks dim and sits there, with the text of the copyright of Microsoft Corporation. So, after not having on the mound, I have to manually shut down the computer by holding down the power button. When I try to start again, told me to go through the Startup Repair tool. If I jump the repair, I just have to meet the same problem - a computer that will not go beyond the screen "green bar".

  So, I do the Startup Repair, and told me what I do for the restoration of the system. Windows starts normally after the restoration.

  Don't forget, this happens from a full stop. To remedy this, I just never completely shut down my computer. I left running and back just at the beginning of the day. The computer may start restart, it just may not start with a full stop.

  Given the start of repair takes, literally, around 4 or 5 hours of full stops complete, accidental or power outages are a nightmare, I am obliged to wait 5 hours to get access to the computer. Fortunately, I have my laptop.

  If someone has encountered this? I saw people talking about the loop of startup repair, but that's not the point, I have. I have yet to see any discussion of my specific problem.

  Thanks in advance!

  Hello

  4-5 hours to do a startup repair is too long.

  Often you get better results if you a using a DVD of Microsoft Vista startup repair.

  Jose how to do a startup repair, etc. using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  See you soon.

• Windows Vista does not accept my password (unchanged) but I have no recovery disk - Windows is already installed

  Hello

  As the title says after using my laptop without any previous problems, suddenly I can not connect on Windows Vista.

  I'm 100% sure that the password has not been changed, caps lock, shift, caps lock Num etc is not active.

  When I bought the laptop, Vista was already installed, so I don't have a recovery disk.

  Any help would be appreciated.

  Hello

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  This is the Information from Microsoft on the problems of passwords;

  You will need to borrow a Microsoft DVD from a friend, Recovery DVD a manufacturer without these special work options available.

  • http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  Malware can also cause problems with passwords:

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If the above does not fix it:

  Here are the different methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Windows Vista does not start, turns to a blue screen error 2203

  original title: Windows Vista does not start, turns to a blue screen HELP PLEASE!

  Help, please! So I'm panicking here, just yesterday, I tried to download the update to Itunes, and it did not work. So I followed the instructions and uninstalled the program first, but one of the applications does not uninstall correctly. I thought I could just substitute with the update and replace. The error code was 2203.

  So I thought it was right after the download all itunes thing, and when I came back to check on the download, the screen turned to this black thing with words on this subject. I decided to force closing down by pressing the power button. Now everytime I turn on the computer, it leads to the screen saying 'windows is loading files', then this blue screen with a very large arrow (the mouse). I tried pressing the F11 key and stuff, but I have no idea what to do. PLEASE REPLY AS SOON AS POSSIBLE, REALLY NEED A COMPUTER!

  "I tried to do the second option, because the first really helped."

  Something works, or it doesn't work regarding: "really helped."

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  I'm sorry, but I don't understand where the procedure of ISO part 2 stops.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You may be interested in this:

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 does not refresh the folder views

  I have the following problem:
  Windows 7 does not automatically refresh the folder view (until I have updated manually by pressing F5) after the following file operations:
  Create/delete/rename/move files or folders

  Final version of Windows 7 Professional, international English version. No upgrade, clean installation.

  It seems to me that it is a delay in my case: if I wait about 30 seconds, the updating is done automatically. There are shared folders on volume.

  I made the following points:
  -removed IconCache - did not help
  -Reset - folder views did not help
  -off to the discovery network and file sharing - did not help
  -Made a clean boot - did not help
  -a ran sfc - not found any violation
  -new user created account - did not help
  -updated the BIOS with the latest version - did not help
  -updated the VGA driver to the latest version - did not help
  -disabled the indexing of files - did not help
  -run Windows 7 Mode safe mode (without network): it seems that the problem does not occur

  I could be satisfied with Windows 7, but this question is terribly boring cause I work with a large number of files per day.

  Could someone help me?

  I had the same problem recently.  Here's what I discovered, FWIW:

  • After reading all of the above, it seems that, at the base, this is related to the shell of the user of Windows interface and how he tries to 'reach out' to other systems.  Fixes disable the Windows Client, disabling home groups, disable sharing of files, etc.
  • I discovered that I have the problem that in some folders.  For example, if I try to create a folder in the my DOCUMENTS folder, the problem occurs, but if I create the folder in a random folder on drive C: (e.g.. C:\MyTest), no problem!
  • I discovered that the folder appears finally - it takes 30 seconds. By pressing F5, I was "rush" of the process.  It also sounds like a kind of thing network client timeout.

  I wanted to start with the easiest, lowest impact.  It worked:

  • I opened the COMPUTER and removed a "network connection" that pointed to a server that is not currently available.

  That solved the problem completely.

  Dan Holme, Intelliem

• My application get Windows 10 does not work HELP Please

  1 - my get app Windows 10 does not work. Whenever I try to run your PC compatibility check it says:

  The report is not available now, you can always book your upgrade when it's time to start the upgrade we will run another report to make sure that your PC works with Windows 10

  2. when I click on view Confirmation it Says:

  YOUR UPGRADE IS RESERVED

  There is nothing you need to do now, you will receive a notification on your PC when windows 10 is ready to install.

  and it been like this for 4 weeks and nothing happened what should I do to check if the applications on windows 7 runs on windows 10 or not and start the upgrade to windows 10

  Please help thanks

  

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  How to create an ISO or USB drive.

  Select upgrade this PC now and then click Next

  

  or

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).