Windows Update does not work after restoring Windows.

I have a HP Mini 210-2080NR netbook with Windows 7 starter (31-bit). My hard drive failed and I replaced it. I ordered a USB HP recovery and then reloaded Windows 7 on new hard drive using the USB recovery drive.

After reloading Windows 7, Windows Update does not work.

This is the error I get:

Windows Update cannot currently check the updates, because the service is not running. You may have to restart your computer.

My connection is OK.

I restarted my netbook and the error is the same.

I reloaded Windows 7 and the error is the same.

Any suggestions?

Thank you

eknaphus

Hello

You can try and install it and check:

Intel Rapid Storage Technology

After that it gets installed restart and check again. Let me know if this does not help...

Tags: Notebooks

Similar Questions

  • Windows Update does not work after restoring the system

    HP Compaq 6000 Pro, bought in early 2011. Windows 7 32 bit. I recently did a factory restore to return to a clean system using factory restore partition. The restoration seems complete ok, and I have a Windows 7 clean and functional configuration.

    However, the Update window will not work (and of course, it is now quite an old installation of Windows 7) it comes up with the Red Cross and the message "Windows Update cannot currently check for updates because the service is not running." Other notable issues that may or may not be related are: Windows Defender won't start not (0 x 80070564). HP Support Assistant reports it needs to update, but the update fails (because then it just says: it should be updated again)

    What I've tried so far:

    Verified that the BITS and the WU services are both actually run

    Uninstalled the McAfee antivirus software

    Tried to install Windows 7 SP1 directly (happens with "catastrophic failure")

    Tried Windows Update (wusa.exe) stand-alone installation / WU Readiness tool-fail (Oxc8000247)

    MS difficulty he said Troubleshooter it corrects problems, but nothing changes later

    (In short, tried all suggestions from MS support)

    It drives me crazy - any help will be appreciated!

    ISO should work, just be sure to download the version of Pro 32-bit.

  • Windows Update does not work after the hard drive has been replaced

    Hello
    I have the same problem, replaced in my Toshiba HD, rebuild from Sysimage, Windows Update does not work. A ran "fix the problem with the Microsoft Windows Update is not working.
    Problem still exist.
    The message that I got while trying to update: "Windows Update cannot currently check updates,
    because the service is not running. "You may need to restart you computer.
    Stop and then restart the service, still no luck.

    I ran Windows troubleshooting. He finds two problems with Windows Update components, it corrects.
    The problem still exists.

    The other post:

    Another interesting fact:
    After the reconstruction the new disk, user account control does not recognize Windows programs.
    for example: execution of Perfmon.exe, the Publisher is unknown! However, when I download the program Windows FixIt, Publisher is recognized as Microsoft Windows. It seems that user account control does not recognize the Windows programs that had found the new HD, but acknowledges those who is downloaded from the internet.
    I guess there is a problem with the license, Windows was preinstalled on the Toshiba and replace the hard drive could have caused a few conflicts of licensing.

    Separated from the:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/Windows-Update-not-working-after-hard-drive/77ab54ca-34b0-49DF-a268-bd07db68d887

    The same problem. Cloned old HD on a larger hard drive. Everything worked perfectly except NO indexing and update WITHOUT windows - the two recurring problems that seem to appear on the forums after a change of hard disk.

    INDEXING resolved with change to "Intel rapid storage technology." Google what I put in quotes, choose the Download Center and get the specific to your OP and the controller software.

    UPDATES have been a little more frustrating. The microsoft .fixes and convenience stores were without help.

    Go to control panel / system and Maintenance / administration tools

    Select Services

    Stop the Background Intelligent Transfer Service

    Stop Windows Update

    In 'My Computer' go to Windows / Software Distribution

    Right-click "DataStore" folder. Rename it to Datastore.old

    Rename the folder 'Download' Download.old

    Return to Services and restart the Background Intelligent Transfer Service and Windows Update.

    Look for the updates. It will take some time because you deleted the database.

    I hope this helps!

  • Monitor does not work after restoring update

    Hello. I have a problem with my PC. My CPU is on but the monitor shows No Signal box. Previously, this problem seems too. But I fixed that by cleaning the RAM access (or other) Point. But this time, this method did not work. I have clear the CMOS, but the problem still not fixed. Oh yes, this problem occurs after the update. When updating, the update has failed and come back. When I start the PC again, nothing is displayed and there is no sound signal. Help me please. My characteristics are processor i3 Intel, ATI Radeon HD 5550 2 GB, DDR3 RAM 2 x 2, Windows 8 Pro 64 Bit.

    Hi Chloe,.

    Thank you for the update.

    I understand that since the DVD burner does not work, you are not able to create installation media.

    Put a USB installation media option. You can use both links to download and create below

    Update Windows with only a product key

    http://Windows.Microsoft.com/en-us/Windows-8/upgrade-product-key-only

    Here are the steps:

    1. download and open the Setup file install Windows 8 Microsoft from the link above.
    2. Enter your product key of Windows 8 and start the download.
    3. once the download is complete, select install by creating media.
    4. Select the USB flash drive (it should be the default choice) and insert the USB key.
    5. accept all prompts to clear the contents of the USB key in order to start the process.

    Let us know if that helps. Keep us informed so that we can help you further if necessary.

  • Satellite Pro 6100 Wireless does not work after restoring from HARD drive

    After that restore disks for installing a new HD and use and to update XP sp2, the Wireless does not work and if the card is installed XP hangs then works in fits and starts. If the card not in place, not bad at all.

    Booting from a Linux CD, the card works perfectly! I assume that the driver is the problem. The wireless card is the original, an Agere MPC13A-20/R, with Toshiba p/n PA317U-1MPC.

    I have found some drivers Agere, but am not sure

    (1) if they are correct
    (2) how to install since the machine works in a way limited with the card in place.

    Any advice?

    Hello

    I checked the page of the pilot and the only available for Windows XP WLan driver is the driver of v.1.11.108 Agere.

    (1) just try to install this driver. If the driver is not correct or is not compatible, then windows will not install the driver and you will receive a notification. You just have to try

    (2) generally you may reinstall the driver from the Device Manager. Open network controller tree, and then you can reinstall the driver.

    But this is only possible if the windows started successfully

    PS: Have you checked the information of Microsoft Windows XP SP2 update on the page of the Toshiba driver.
    I discovered that you need to update several utilities if you have installed SP2 on this laptop.

  • Windows 7 Windows update does not work after replacing hard drive

    Win7 Home Premium and HP Pavilion DV6-2150US.  Failed hard drive.  I bought a Seagate 500 GB replacement (original drive was 250 GB) and used my purchased HP re - install DVD to re - build Windows and reinstall the OEM software on the new hard drive.

    Everything starts fine, but he won't deal of Windows updates (. e. is a big red X on the screen of windows update).  I tried Microsoft "Mr Fix it" download - but it error and none of the other suggestions Microsoft not work either.  When I had the chance to talk with a MS tech support person, she suggested that somehow windows on the new drive is not authentic, etc...  Although windows on the new drive hard indicates that its active and authentic... is there some kind of checking a number of the hard disk 'really' activate windows?

    Just to make sure that my reinstall was not corrupt, I deleted the new hard drive and began in everywhere... I have the exact same result... it boots fine, but will not update through windows update.  The only other change to the laptop was that I had better buy double the memory to 8 of 4 when I bought 2 years ago... once again, do not know if there is a kind of material exchange limitation before disabling the windows software.

    Help, please!  I'm really stuck.  THX JimmyC

    Thanks for your post... I solved my problem by installing the update driver Intel rapid storage through this link:

    http://support.HP.com/us-en/document/c02219204

    I suppose that as long as the hard drive is lower 250Gig you need not the new driver.  But when I replaced my hard drive failed with a disc 500gig hard - when I did restore HP to Win7 and the OEM software from the dvd, I bought - it put the storage driver original in Win7 - which works very well with a 250 GB drive, but causes the windows update doesn't work is not for readers more than 250gig.   When I installed the driver from the link above file, Windows Update started working - and you can imagine there are many, many fixes since my PC has been restored to original Win7 - doesn't not even Win 7 SP1.

    I hope it helps someone else... thank you for your message.  JimmyC

  • Message "Non-genuine Windows" & Windows Update does not work after replacing the RAM.

    Hello

    I have a PC desktop HPE-170 a current running Windows 7 Home Premium SP1, which has been installed on the machine by the store where I bought it. It has been properly activated and has worked very well for 18 months or more.

    The other day it decided to not start and a computer savvy friend corrected the problem by removing the RAM memory cards, clean the gold plated connectors and re - insert the. This fixes the problem and it started again.

    Today I received a message on the computer of Microsoft saying "your copy of Windows is not genuine" and he invited me to "solve online. Well, click on the 'My Computer' icon showed me that windows was still active.

    By clicking on the "solve Online" link took me to a validation page, where after she tried to validation, it says "The Validation failed" and advised me to buy another copy of Windows 7 HP for AUD $149. Gee, thanks, but no thanks Microsoft. I clicked on cancel and the non-genuine message has not yet reappeared.

    I also found now that Windows Update doesn't work that way.

    I rang MS that says that I need the Windows 7 Setup disk. When I said that I don't have one, they advised me to ring HP. I didn't have time to complete the phone call from HP, but I believe that HP wants me to reset the system to factory with them State guide me by phone.

    I have a genuine copy of Windows, a product key, and it shows as activated.  From what I understand the system think that I tried to put my copy of Windows 7 on a new computer or similar? I'm not sure.

    Is it really difficult to get the system works just like before?

    Thanks for the reply.

    I'm afraid I don't understand your instructions. I think that you are a fair way waiting for me in the issues of tech savvy.

    I think I have stumbled upon something here; http://support.HP.com/us-en/document/c02219204

    Download and update this driver seemed to do Windows Update includes itself.

    I can now go here; realwww.microsoft.com/ /validate/ and he says: "Welcome to Windows".

    I hope I now get no more fake messages on my OS Windows is non-genuine.

    I'll see what happens tomorrow.

    Last update 18/7: seems to be fixed, no more problems.

  • Windows Update does not work after you reinstall Windows XP SP3, get error: "the site has encountered a problem and cannot display the page you are trying to view.

    Original title: cannot run Windows Update

    I just reinstall my Windows XP and SP3, but I can't run Windows Update and gives me the following error message:

    The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

    For self-help options:

    To support options:

    Can someone help me please?  Thank you.

    I just reinstall my Windows XP and SP3, but I can't run Windows Update and gives me the following error message:

    The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

    For self-help options:

    To support options:

    Can someone help me please?  Thank you.

    [1] select start > run > wuaucpl.cpl > disable automatic updates > apply (if the setting is changed) > OK

    To disable the horse notification that appears in the status bar on automatic updates is turned off.

    Go to start > Control Panel > Security Center > resources > change the way Security Center alerts me > uncheck automatic updates

    [2] manually download the full install for IE8 exe and install IE8 and refuses to download updates at the time of the installation of IE8

    http://www.Microsoft.com/en-us/download/Internet-Explorer-8-details.aspx

    [3] manually download and install the latest cumulative security for IE8 update and restart the computer before

    visit windows update via the shortened link in your Start menu.

    When you have Win XP SP3 and IE8, it will be the necessary file recommend you download and save the file in the folder, and then double-click on and run the executable file from there.

    http://download.Microsoft.com/download/1/9/A/19A6AC47-9EA0-455F-B918-A44D25B5304C/IE8-WindowsXP-KB2898785-x86-enu.exe

    Restart after installing IE8 cumulative security update.  It should restart when installation is complete.

    [4] now to connect to windows update manually through your browser using the shortcut in the start menu link.  Ignore the warnings, recommendations to turn on automatic updates.

    Report back please on the status and please report problems with error codes. Thank you.

    Recommend you not install MSE but rather install a free antivirus like Avast or AVG.

    Recommend also you do not install Windows Search 4.0 these programs not to live pleasantly on most XP machines and cause CPU excessive loading unpredictable and inconveniently sometimes interfering with the usual ability to XP if not to multitask without problems.  Also recommend you only install Firefox is a browser much better than IE8 that will not work even at many Web sites.

  • G560 keyboard does not work after restoring

    Hello!

    I just did a restore using the recovery disks sent to me by the customer hotline of lenovo.

    the whole process went through and now it says:

    "LENOVO PRELOAD IS COMPLETE!

    Press any Key to Shutdown! »

    the keyboard and the touchpad does not, so I can't press a key...

    My question is, do I I just stopped the laptop by pressing the power button or deals that damage the recovery?

    Thank you very much!

    it solved!

    I pressed ctr + alt + delete and then the keyboard worked again and I could press a button...

    Thanks anyway!

  • the Windows Setup program does not work after restoring

    Since I restored my system, when I try to open excel or word, I get a windows install. Even after installing windows install 4.5. How can I get excel and word to work?

    Hello

    1. could you give us the exact error message?
    2. do you get this error only when you use Excel?

    Method 1.
    I recommend you to reregister the Installer engine.
    Here's how:
    a. Click Start, click Accessories and then click command prompt.
    b. at the command prompt, type the following and press ENTER after each line:
     
    MSIExec /Unregister
     
    MSIExec/regserver


    Method 2.

    It seems that there is a background app that launches the installer of Windows. We can perform a boot minimum troubleshooting to find the same thing. You need to perform a clean boot to find the program that is causing and then disable or remove.
    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353/en-us
    Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

    I hope this helps.

  • Windows Update does not work after reset

    Hi guys,.

    I had problems with a computer laptop lenovo so I did a reset of the system, and he started from scratch. Everything was going well until I tried to run updates about 20 have installed, but there is an another 80 that used.

    When I try to download it says installation failed and when I restart the laptop he tried to confirgure updates and fails.

    In addition to this he is originally an error with the tile apps that I said install windows 8.1 but you click on the ad of tile, nothing happens but other applications seem to be good and they are all updated as expected. Or sometimes you click on the tile of the app and it remains on the green screen with the circle past throughout but did not go forward.

    I tried making sure that I am the administrator and nothing, Ive even did the output of sfc scan that reveals no problems but whe I official microsoft windows update troubleshooting, it says non-fixed recent updates installation problems, repair of Windows Update services and dependencies and it mentions the release of the sfc , but I already have the CFS scannow and there is no problem.

    The only thing that happened with the most recent is that it took forever kept retrying until it failed and came back finally my system load upward, but strangely without saying that he has 3 updates appear to have installed because there is now only 77 I just can not understand.

    Because I performed a system reset to factory settings and installed norton to protect there is nothing that could prevent updates, so any help would be greatly appreciated!

    Hi Gareth,

    Usually this problem is due to any third party/PPP program or due to some related issues of settings. I would like to know some information about this problem so that we can help you further.

    1. What is the error message or an exact error code?

    2. what security software is installed on your computer?

    3. have you made changes on the computer before this problem?

    I would suggest trying the following methods and check if it works for you.

    Method 1:

    Set Internet Explorer as your web browser default and check if it helps.

    Make Internet Explorer your default browser:

    http://Windows.Microsoft.com/en-us/Internet-Explorer/make-IE-default-browser#IE=IE-10

    Method 2:

    Put the computer in a clean boot state, and check if the problem persists. This will help you determine which third-party program or app is causing this problem.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7 or Windows 8 / 8.1:
    http://support.Microsoft.com/kb/929135 
    Note: After the boot minimum troubleshooting step, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

    Method 3:

    Try the steps in the Microsoft Help article and check following.

    The problems with the installation of the updates:

    http://Windows.Microsoft.com/en-us/Windows/troubleshoot-problems-installing-updates#1TC=Windows-8

    Please reply with the status of the issue so that we can better help you.

  • HP Mini 210-4120: Windows Update does not work after the Reset HP Mini 210-4120 factory

    Following the advice in another post on this site, in order to create a "clean" installation and his work & Office Starter (they do now--they have not before) I did a reset to factory of the recovery partition. (Trying to create discs of recovery or a USB key on the two brackets to the stage of checking).

    The new game worked well, without error, BUT try as I might, I can't have the updates of Windows to work. If tried to re - adjust the C:\Windows\SoftwareDistribution folder, sfc/scannow (no errors found) and using the powerful Microsoft FixIt which is supposed to re - install the Windows Update service - all without success.

    I read on a post no HP (but I can't remember where!) someone finds this problem caused by a chip Intel driver, so maybe that could be applied to my PC.  However, since the factory Reset recovery Partion includes SP1, I would have thought that at least the system should download updates!

    I get no error message, it justs waits... and waits... and waits.  I let wait for 90 minutes, but there is still no sign of activity.

    I hope someone knows how to solve this problem otherwise I'll have to go back on my installation of non - Office Starter - his, no. (Who, fortunately, I have a couple of image.)

    Hello:

    I get it, I guess.

    I thought that you also had a simple W7 starter installation disc (which must be done by editing the efi cfg file in any drive of W7 installation), and then you use the product key on the case of the laptop to turn on.

    I knew that you had tried the partition recovery without result.

    I was in the middle of the answer I have provided the link for audio driver, and I see that you already have.

  • Windows Update does not work after new hard drive

    After you install the new hard drive, when I click on windows update, it opens, makes his scan, then I get the message, (the website has encountered a problem and cannot display the page) I have a Dell Optiplex 745 running XP Pro, Explorer 8, have tried several times and restarted, please help.

    What do you think of will be without safety last cumulative update for IE8 be manually downloaded and installed before going to windows update to nothing at all.  What will happen is the CPU at 100% and a whole lot of nothing else of fortification.

    Do not go in line with the hopes of getting the updates of windows after the installation of SP3.

    Disable automatic updates in Control Panel > automatc updates > disable automatic updates

    Start > run > wuaucpl.cpl > disable automatic updates > apply (if the setting is changed) > OK

    Get the exe to install offline full download for IE8 [should represent approximately a 16 MB file] and then install IE8 after SP3 and the decline of the ability to download updates for IE8 at installation time.

    Then manually download and install the current cumulative security for IE8 update and restart the computer.

    visit Windows Update through your browser link in the start menu.  Consent to any ActiveX install queries and validation / advantage genuine offer and cross your fingers.

    It is possible that you may still have questions, but this will reduce some of the problems if you follow the recommended sequence.

  • Windows Update does not work after reinstalling Windows XP due to the infection by the virus

    Hello

    I have a system of Windows XP with IE8.

    I can't get Windows Update to work. Just crossed another reinstall due to a virus problem and trying to get my operating system again.

    Any help would be appreciated.

    Thank you

    We need to know what type of CPU you have. Follow the instructions in Tricky again. You will see a window that looks like this:

    I suspect you have an AMD processor. If so, please read the following:
  • Windows Update does not work after load Win7 SP1 Ultimate OS fresh 800700E err

    Hello

    This has never happened to me, but I've just loaded Win7 Ultimate SP1 on a laptop, active. I can't get any Wu at all!

    I do not have the additional languages, I tried the troubleshooter of WU (a few times now), I tried to stop services: msiserver, ad etc., BITS and wuauserv and then rename C:\Windows\SoftwareDistribution to C:\Windows\SoftwareDistribution.old and do the same thing to catroot2 in \windows\system32.

    I installed IE11 and it appeared to install its own updates, but beyond that, I have been unable to execute WU...

    Deflectors - someone can suggest good link on hidden files in C:\ which WU to work?

    If anyone has any ideas in advance thanks

    BigDaddy68

    Follow these steps: set the automatic update search to "never check for updates" and then restart. Download and install KB3102810

    https://www.Microsoft.com/en-US/Download/details.aspx?ID=49540

    https://www.Microsoft.com/en-US/Download/details.aspx?ID=49542

    Then try again.

    Best regards, VZ

Maybe you are looking for

  • Setting up file sharing: ⁄ iMac MacBook Air two 10.11.4

    I really messed up things and don't know what sharing arrangement I should or can enter. The Finder sees different another Mac, but that's all. Maybe I should start from scratch - but back to a 'clean slate '? I would be grateful for any comments. TH

  • Lenovo Y500 Dual Graphics = Sli

    Hey guys, I'm kinda new to all this stuff graphics double, so I was wondering if you could help me. I bought this laptop: (Lenovo Y500 Dual Graphics) http://shop.Lenovo.com/SEUILibrary/controller/e/Web/LenovoPortal/en_US/catalog.workflow:item.detail?

  • How can I find out what programs have access to my internet connection?

    I have a connection to the relatively slow internet (satellite). When programs to reach out for updates or whatever, the response time for my internet research goes down way but I do not know what are the offending programs and how to decrease their

  • How can I enable "access to audit objects" in Vista Home Premium edition?

    I've looked everywhere and I can't find the answer!I know I have to change the registry, because the Home editions is not secpol.msc or similar which would allow me to do that easily. Where in the registry could I find it? Thanks in advance for your

  • 2 computers on an Ethernet network directly windows 8

    I want to connect to my backup PC directly without running into my router (my PC has two network adapters) Plenty of info out there to do this on win7 and vista, none for win8. I connected the 2 together and in network and sharing Center and I can se