Windows update error 80070490 code

Similar Questions

• Windows update error 80070490 - other corrections code do not work.

  I have 9 updates, that I need to install it and I get the error code 80070490.

  I did the following to try to address everything with no luck...
  (1) tried a system restore. Unfortunately this update has been tried and failed several times during the last few days, and each time it is automatically a restore point. So now I have no more old that won to restore restore points.
  2.) have tried updating system as indicated here preparation tool:
  http://Windows.Microsoft.com/en-GB/Windows-Vista/Windows-Update-error-80070490
  Rebooted and still have the problem.
  2.) attempt to perform a repair with my Vista Ultimate DVD installation as described here:
  http://Windows.Microsoft.com/en-GB/Windows-Vista/Windows-Update-error-80070490
  The problem is that I can't choose 'upgrade '. It is grayed out. The reason for this is that I can't upgrade to a version older than what I'm running now. My DVD is SP1 and I have since upgraded to SP2. I keep seeing this recommendation and it will not work for me.
  (3.) I deleted the "Software Distribution" folder and reinstalled the WindowsUpdateAgent.
  4.), I tried to use the Mr FixIt. It does not find that there is a problem with the windows update and then it tries to fix it. It runs corrections and says that it has attached to them. But when I close and re - run, problems are found and 'fixed' again. I have been through multiple cycles of Mr FixIt, restart, update, error, fixit, etc.. I also tried the fixit several times back to back running. Whenever he finds the problem, says it is fixed, but then when re-ran he finds the problem, said again and again this is corrected.
  This all started after uninstalling several pieces of software by using the control panel. I emptied several unused programs and uninstalled AVG Antivirus. Not sure if this is related or not, since that was a few days after uninstalling before I saw for the first time this error.
  I'm still having the problem.
  If you could point me kindly to specific files that need to be extracted for this error I would really appreciate it.

  I managed to solve this problem on my own. It turned out to be something with the above Japanese language pack. I uninstalled it and everything updated correctly. I thought I'd pass just in case someone else has the same problem.

• I get the Windows Update error 80070490 blues! -Vista

  Original title: I get the Windows Update error 80070490 blues!

  I am running: Windows Vista Ultimate 32-bit & Internet Explorer 7 (impossible to upgrade to IE8). I've beaten my head against the wall for well over a month now because I can't seem to install the following updates without entering a code 80070490 error:

  KB975467

  KB959426

  KB968389

  KB970430

  KB971737

  I did the following in all possible combinations in an attempt to install these updates:

  Disabled user account control

  turned off the Windows Firewall

  disabled my antivirus (Avira Anti - Vir Personal)

  To put it succinctly, I can't think of anything to do after following all of the ideas, tips & suggestions help Section!

  Help, please! All I can think to do now is to get some black candles and sacrifice a rubber chicken!

  Wouldn't you...

  0 X 80070490 - ERROR_NOT_FOUND
  Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

  The error you receive occurs if there is corruption in the manifest of component maintenance base.

  Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
  http://support.Microsoft.com/kb/931712
  "Explains the SFC / Scannow.

  See also: how to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  A repair install is the usual solution of SFC/scannow does not work.
  However, a repair (AKA In-Place Upgrade) installation will be not solve the problem if it is due to a hijackware infection.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  NB: If you have installed SP1 or SP2 for Vista

  Uninstall the Service Pack/s: How to uninstall Windows Vista service packs as a troubleshooting step
  http://support.Microsoft.com/kb/948537

  See also:

  How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

  Step 7 (method for Windows Vista), the * UPGRADE option is not available because Service Pack/s are installed and that your operating system is newer than the system you are trying to reinstall, so service pack/s must be removed in this case.

  TaurArian [MVP] 2005-2011 - Update Services

• Windows Update error 80070490 installation KB2679255

  Original title: we have all seen big problem istelling updates

  SEMM to me like windows no longer like and want us to buy new computers I read how manny people are havin the same problem and they don't suprerb thereon .i have a month with the error code 0 x 80040154 error 80070490 and the Dungeon send me updated same time and many KB2679255 can I get the assistance of a person really apreciate thanks guys...

  From the other thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/cant-down-load-any-updates/b2a0ce2b-6b00-4214-95D5-6499a92d5b2e

  Cannot down load the updates

  Can not load down the updates, computer message read, Windows update data locations have changed... Please can anyone help with this issue...

  Hello

  Method 1:

  I suggest you to go through the steps mentioned in the link and the Coachman.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  If the steps do not help then I suggest you to go through the steps mentioned below and check.

  Method 2:

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  http://support.Microsoft.com/kb/958044

  Windows Update error 80070490

  http://Windows.Microsoft.com/en-GB/Windows-Vista/Windows-Update-error-80070490

  Important: make sure to save all your date before performing the repair facility.

  Note: After the upgrade on site, your personal data and installed programs will not be deleted, but you may need to run Windows Update to install all the updates that are available for your system to update these files system to the current version.

  If your installation DVD disc is prior to Sp1, and you have the SP1 is installed on your computer, you will need to uninstall SP1 to finish the upgrade on the spot and then reinstall the necessary windows updates. This applies if you have SP2 also.

• HP OfficeJet Pro 8610: Windows Update error 80070490

  I received a Windows Update error 80070490 compared to the HP printer.  How to solve this?  What are the steps to take.

  Welcome to the HP Forums @ace8,

  I came across your post about Windows Update error "80070490" you received on your Windows Vista system and I wanted to respond to try to help.

  Here are two documents that I found on the Microsoft website on errors:

  1. Windows Update, error 0 x 80070490
  2. Windows Update error 80070490

  If there are problems with the printer features, let me know a description of the printer problems and I will do my best to help.

  Click the thumbs up below to say 'Thank you' & the "Accept as Solution" If the problem has been resolved it please and thank you!
  
  All the best,

• Cannot install Windows update, error: 80070490

  Original title: error 80070490

  Windows will not run updates.  Get error 80070490.  I've done all the troubleshooting that was proposed and nothing works.  Has anyone else got this specific error?

  Hello

  1. What are the troubleshooting steps you tried to solve the problem?

  2. What is the description the updates that are failed?

  I suggest you to follow the steps from the link below and check if it helps.

  Windows Update, error 80070490: http://windows.microsoft.com/en-US/windows-vista/Windows-Update-error-80070490

  Hope this information is useful.

• Get Windows Update, error: 80070490.

  Original title: Get Windows Update errors

  I have a Samsung NP350V5C-S09AU.

  I did a restore (full reset/factory setting) due to a previous issue in which I can not enter safe mode and start windows because of the failure in updating graphics driver (managed to do a complete reset via advanced startup).

  After the restoration of the system, I used SW Update to download the drivers first then checked and installed the windows updates. I ignored the prompt to reboot the PC SW update because I waited for the restart of the PC of Windows Update service prompt (that's what I before I did a restore and even managed to safely update to windows 8.1).

  After the reboot, it doesn't seem to be anything wrong (showed the usual for update and other progression). Then I reopened it SW Update again to search for any other driver updates, met a little a problem to update driver Bluetooth but has managed to install it successfully. However it does not appear to update to 2.0.0.7x 2.0.0.38 'settings', then I felt that I should just give 2.0.0.38 until I have install more updates to the window.

  Before you install any other updates, I checked windows update history and find facilities failed (error 80070490); I went and did a few things such as troubleshooting and SFC scans via admin cmd.

  Troubleshoot has trained and found "Windows Update components must be repaired" and "Find files missing or corrupted", both correction has been marked as fixed (auto-fix option). I ran out again to double check if it has been set, but even after several times, it shows the same results of these two issues have been found, but attaches.

  SFC scans by admin cmd has led, in a first step, "Windows Resource Protection found corrupt files and managed to repair their." Details are provided in convertible bonds. Newspaper %WinDir% \Logs\CBS\CBS.log. ». I used troubleshoot and always found the same errors as above and ran Scan SFC, where this time it gave rise to ""Windows Resource Protection did not find any breach of integrity. "."

  How to deal with these issues because I intended to install the last update immediately and upgrade to windows 8.1 like last time. These questions/problem makes me doubt made more updates up to now since it's the first time I get / these errors/problems.

  Hello Ross,

  Thank you for the update.

  You can try to follow the following suggestions to solve the problem with Windows Update.

  Error code Windows Update '0 x 80070002' or '0 x 80070003 '.

  http://support.Microsoft.com/kb/910336/en-us

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• Windows update error 80070643 code.

  I, ve followed the two steps described in the help of the windows .net framework and support site but my problem was still not fixed. All the updates that are related to the problems caused by revised time..., can not be installed. Help, please!

  So, what's your Windows operating system?
  What have you tried?

  Is - this office updates or updates of the framework or other updates at the source of the problem?

  FYI

  You receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update or Microsoft Update Web sites to install updates
  http://support.Microsoft.com/kb/958052

  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798

  Windows Update error 80070643
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643

  Windows Update error 80070643
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80070643

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
  http://support.Microsoft.com/kb/923100

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982

  TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Windows update error 8024200d code

  During the last two weeks my laptop has been not to install the updates that was sent by Microsoft. The error code is 8024200d. Whenever I run the troubleshooter, it corrects two errors that are different from those that I have. The problems identified by the help desk are:

  1-potential Windows update database error detected 0x800F081F
  2 - Windows Update components need to be repaired.
  Whenever I run the troubleshooter the result told that problems are detected and fixed, but the next time that I reboot, its still there.
  Please help me solve the error 8024200d because I think that's what creates this problem. Any help will be much appreciated guys.
  Thank you very much

  These two errors are the response standard stock when someone is running the troubleshooter.  It may have fixed something or it may not, there is one way to really know, isn't there?

  It's a failed install all updates to date or just one?

  See if you can get your updates by a clean boot?

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/default.aspx/KB/929135

  You can manually download the updates of Windows via.

  Microsoft Update Catalog

  http://catalog.update.Microsoft.com/v7/site/home.aspx

  You know what updates to search.

  Take a look at these options too.

  System update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008
  http://support.Microsoft.com/kb/947821

  For Windows 8, paragraph, see "use Deployment Image Servicing and management fix Windows Update errors".

  Use Deployment Image Servicing and Management to fix Windows Update errors

  1. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  2 type the following commands. Press ENTER after each command (allow the command to complete, it is a long process, perhaps up to one hour).

  DISM.exe / Online/Cleanup-image /Scanhealth

  DISM.exe / Online/Cleanup-image /Restorehealth

  3. close the command prompt, and then run Windows Update again.

  CheckSUR: System Update tool to repair Windows Update
  http://www.thewindowsclub.com/CheckSUR-system-update-readiness-tool

• Windows Update error 80070003 Code

  Cannot delete temporary files in "DataStore.edb" directed by "Windows Update., error 80070003" help and Support page When I try to open this folder, I get a message "Windows cannot open this file" and asked to "use the web" or "select a program".

  Hi, there is a way that will help correct this step by step.
  How to fix Windows Update error 80070003
  Hope this information is useful. Good luck.

• Windows update error 52F CODE

  iM HAVING BAD INSTALLER updates, IM TOLD THAT THE LOCAL INSTALLATION SOURCE IS CORRUPTED.  HOW CAN I FIX THIS PROBLEM?

  See: http://windows.microsoft.com/en-US/windows-vista/Windows-Update-error-52F if helps. All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.

• Fixing of Windows Update error 80070490

  I tried the Windows Update error correction. System update readiness tool has not corrected the problem. When I insert the Windows DVD, I get to the step 6 which asks which type of installation, I want. When I try to click on upgrade, it says updating has been disabled. Any other suggestions? Help!

  Hi NancyTC,

  You can consult the following thread link and check the suggestions provided by Halima S, technical support engineer.

  Try to do an upgrade of in place to solve the problems on my vista Home premium, but running in a message which says "has been disabled.

  Hope this information is useful.

• Windows update error 80070424 code and 0x80070005

  Impossible to update windows more (service pack) been like that for months (can't even to service pack 2) that's what I tried (tried a lot of things besides)

  Step 1: Went to start-> all programs-> Accessories. Then click on "Command prompt" and click on "Run as Administrator".

  Step 2: Typed REGSVR32 WUAUENG. DLL in the command line and press ENTER. Then I got a "DllRegisterServer c:\windows\system32\wuaueng.dll error could not go further to move forward with:

  Step 1: Click on start-> all programs-> Accessories. Then right-click "Command Prompt" and click "Run as Administrator".

  Step 2: Type REGSVR32 WUAUENG. DLL in the command line and press ENTER. You will get a window "DllRegisterServer in successful c:\windows\system32\wuaueng.dll.

  Step 3: Then please pass to enter the following commands one by one. A success notification is received after each command.

  REGSVR32 WUAPI. DLL

  REGSVR32 ATL. DLL

  REGSVR32 WUCLTUX. DLL

  REGSVR32 STINKS. DLL

  REGSVR32 WUPS2. DLL

  REGSVR32 WUWEBV. DLL

  OK, after completing all the steps mentioned above, you have fixed the error code: 80070424 Windows update. Now try Windows Update again.

  Put up-to-date Windows sometimes also have other errors, such as the error 80070005 error 646, error 80070490.

  And Yes, it is a registered version. Bought for my son in a department store.

  Thank you

  Error message when you use Microsoft Update or Windows Update Web sites to
  install updates: 0 x 80070424
  http://support.Microsoft.com/kb/968002/
  TaurArian [MVP] 2005-2010 - Update Services

• Windows Update error 80070490 - persists

  I have Windows Vista Ultimate and I get error 80070490 when you try to make updates.

  I tried to reinstall the program with the DVD to repair damaged files, but my DVD has SP1 while the computer already has SP2, so it will not upgrade the DVD. The only option is to 'clean up' the installation or an upgrade higher.

  Any suggestions?

  I also have the DVD to upgrade to Windows 7 Ultimate. It doesn't matter if I'm updating 2 updates to security in Vista before moving on to Windows 7? The new installation of Windows 7 take care of damaged in Vista files?

  Thank you

  Julianzote

  0 X 80070490 - ERROR_NOT_FOUND
  Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

  The error you receive occurs if there is corruption in the manifest of component maintenance base.

  Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
  http://support.Microsoft.com/kb/931712
  "Explains the SFC / Scannow.

  See also: how to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  A repair install is the usual solution of SFC/scannow does not work.
  However, a repair (AKA In-Place Upgrade) installation will be not solve the problem if it is due to a hijackware infection.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  NB: If you have installed SP1 or SP2 for Vista

  Uninstall the Service Pack/s: How to uninstall Windows Vista service packs as a troubleshooting step
  http://support.Microsoft.com/kb/948537

  See also:

  How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

  Step 7 (method for Windows Vista), the * UPGRADE option is not available because Service Pack/s are installed and that your operating system is newer than the system you are trying to reinstall, so service pack/s must be removed in this case.

  TaurArian [MVP] 2005-2011 - Update Services

• Windows update error 80070490

  Windows error 80070490 update - have tried restores back few months but still not fixed. Trying to solve what thopught he had resolved, but didn't. I don't think I can be a windows DVD or the disc so how to solve this problem? Thank you

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997

  or

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044