Windows Update error Code 80004002

Similar Questions

• Cannot install Windows Update error code 80004002.

  OT:help: Windows Vista 64 problem (inaccessible update).

  Hi all

  Hope you can help me solve this problem.  I'm not a "dummy" computer in many ways, but please treat me as if I was a (do not assume I know that the process to follow to achieve your advice).  It will be easier because I won't have to ask, "you told me to do this, but I don't know how."

  We had this installed desktop (Dell Studio with Vista 64) for about 5 years computer.  A couple of days, I noticed that all of a sudden I could get are more updates of Windows (it is set to automatic, but sometimes I do it manually) and that the history of the update has been completely served.  I also noticed a problem with .zip files.  I can is more freely manipulate them, such as the addition of a text file or delete.  I suspect the problem with zip files is impossible to obtain the updates of Windows, but I am of course much concerned by the updates of Windows.  I rarely use zip files, and I have for countless alternatives for these issues.

  When I try to get the Windows updates, the error code 80004002 appears:

  

  I did some research and learned that it probably has to do with the lack of "Windows Service Pack 2".  I downloaded and tried to install SP2 several times, but each time I get this message:

  

  When I click «go online to learn more...» ', nothing happens.

  I should add that I do not have Service Pack 1, and I also ran a variety of malware and cleaning programs, all without success.

  If anyone can help me solve this problem, I would be very grateful.

  You're welcome, thank you for your feedback & good luck. Mark one or more of my previous posts as RESPONSE will officially close your thread.

  

• Windows updates: error code 80040154

  No updates have been installed successfully in more than a month... What is the problem? Error code: 80040154... using Windows Vista basic

  * Title *.
  My Windows Vista Basic does not accept windows updates: error code 80040154. What is the problem?

  Alan,
  If you have not already opened him a pension case and you still get this error, here are a few things to try.
  Run these tools and see if one of them report errors that cannot be fixed:
  Disk error checking
  System File Checker  
  The system update tool

  If those who invent it own and you still have a problem you can run some virus\malware scan from another source and then your.  Take a look at these links because they have some great info on virus protection:
  Get rid of malware 
  Can I clean an already infected computer?   
  Windows Live OneCare Safety Scanner Windows 7\Vista

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Update error code 646 & dt000.

  Received the Windows Update error Code 646 & dt000 does not allow the following 2 updates be installed (KB976382 KB981725) what I need to do.

  Sorry, you have problems getting your patches installed. I have a number of things for you to look at.  First of all, yourBackground Intelligent Transfer Services set toAutomaticand started and Windows Update ? They both should be started. You can check these settings by typing services.msc in the search box of the start menu.

  Sometimes in order to get patches to install correctly, you must perform these tasks manually. Click each of the links below and click on download and run.  You must accept the agreement and then click on continue.

  KB976382

  KB981725

  If this does not work, try to run the Microsoft OneCare safety scanner.  Sometimes it will solve problems of hidden registry, or can clear the virus that can prevent the installation of the patches: http://onecare.live.com/site/en-us/center/whatsnew.htm. Click full service scan, and thenQuick scan (full scan takes a long time to complete). Try the patches.

  Barbara

• 8024402C in Windows Update error code crashed my office.

  8024402C in Windows Update error code crashed my office. How can I solve this problem?

  Please visit http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/1467f44b-ee27-4f7d-98d7-f1c4b35b3395. Quote your full version of Windows (for example, WinXP SP3;) Windows XP 64 - bit SP2; Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  0x8024402C error code when you try to install updates on Microsoft Update or Windows Update Web sites
  http://support.Microsoft.com/kb/900936

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Update "error Code 80244019.

  Can someone please help me why this error; Windows Update error Code 80244019 appears when I update my computer?  I think it's due to the update of Windows Defender does not. I use Windows Vista. Please can someone help me solve this problem?

  I would check to see if you have a Trojan or a virus on your system.  He saw several cases with that error and it has been resolved by removing the Trojan horse and reboot your system. Once the Trojan horse has been removed, they were able to install from Windows Update again. It seems possible that your Windows installation has been damaged deliberately by a Trojan horse to avoid you update your system or remove the Trojan horse. Your first priority should be to clean your PC of any malware.

  (1) check that the definitions for Windows Defender is updated.

  Windows Defender is a free program that helps you stay productive by protecting your computer against the pop-ups, slow performance and threats caused by software security spyware and other potentially unwanted software.

  You can download Defender from the following web site.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=435bfce7-da2b-4A6A-afa4-f7f14e605a0d&displaylang=en

  (2) you can scan your computer now online and clean for free with Live OneCare with the scanner that is available on the following web site. Windows Live OneCare safety scanner is a free service designed to help ensure the health of your PC. It check and remove viruses and to get rid of the junk on your hard drive.

  http://OneCare.live.com/site/en-us/tryscanner.htm

  (3) use the malicious software removal tool to find malware. This tool checks your computer infections by specific, prevalent malicious software (including Blaster, Sasser, and Mydoom) and helps to remove the infection if it is found. Microsoft will release an updated version of this tool the second Tuesday of each month. You can download the removal tool from the malicious software from the following web site.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=ad724ae0-e72d-4f54-9ab3-75b8eb148356&displaylang=en

• Pavilion dv6t-2000: Post recover process reimage disk - windows update error code a 8024, 000

  Hello

  After replacing my old HDD with a new SSD, I successfully used my purchased 1 & 2 recovery discs to reload Windows 7 x 64.  Now, I am able to connect to the internet and navigate through Internet Explorer, but I can't get Windows Update to work.  I get this error: Windows Update 8024A 000 error Code.

  I researched and found this fix:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-update/Windows-Update-error-code-8024a00...

  However, after you follow the steps to stop services, rename the specified files, register the dll, and then finally to leave the services, I'm still having the problem.  I also ran a utility "fix" looking for issues with the Windows Update utility, it has been correctly executed and said it solved the problem, but the problem persists.  I get more a 8024, 000 of the error, but the update still does not work.

  I don't him have not yet tried this, because of the weather, but will plan no later than today:

  In safe mode, access c:\windows\ and rename C:\Windows\SoftwareDistribution to SoftwareDistribution.old.
  OK and restart.

  I also tried to upgrade to the latest version of the Windows Update utility which has as well.  I can install other applications (e.g., Norton anti-virus, java, adobe flash player) without problem.

  I noticed that I have not installed ServicePack 1, I did before as I have reimagee my computer. I need to install this first?

  Anyone has any ideas, or did I miss something?

  Your help is appreciated!

  Thanks, Orrin

  I was able to find a solution to this problem.  It is a problem with the HP recovery disk image.  It does not correctly install the Intel Rapid Storage Technology driver.

  To resolve this issue, go here: https://downloadcenter.intel.com/download/20868/RAID-Intel-Rapid-Storage-Technology-Driver-for-Intel-Desktop-Boards

  Download and install the version appropriate for your respective operating system.  As soon as it was installed it fixed my Windows Update doesn't work not, error: 8024a 000

  Thank you

  Orrin

• Windows Update error code 8E5E0147 when installing KB968930 update

  I have windows vista and when I try to install update KB968930, I get the Windows Update error code 8E5E0147. Nothing seems to fix this error. Any suggestions?

  Hello

  There could be various reasons for the updates to fail. No matter what security software installed on the computer may crash or services related to the programs installed on the computer. Also if there are corruptions in the files\folders related to Windows updates.

  Reset update components would actually try fixing the part of corruption by recreating these files and also to re-register the files necessary .dll (Dynamic Link Library).

  http://support.Microsoft.com/kb/968930

  Some users corrected this problem by resetting the components of windows updates. Try these steps and check the result.

  Temporary disable the firewall/security settings and check if it makes a difference.

  http://support.Microsoft.com/kb/283673

  Do allow him back course so that your computer is protected.

  Method 1: Reset Windows Update components.
  Log on as administrator.
  a. visit http://support.microsoft.com/kb/971058
  b. click Microsoft fix and run successfully.
  c. restart the computer once the tool is run.

   

  Method 2: I recommend you perform the clean boot.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  For more information, see the following link below:
  http://support.Microsoft.com/kb/2509997

  Hope this information is useful.

• Unable to run windows update error code A 8024, 000

  Original title: 8024A 000 error

  I replaced my hard drive recently, and after you install the recovery disk, I am unable to run the window update (error code A 8024, 000). I replaced the hard drive of this computer before and used this disc of recovery before and never had this problem, I even tried to reinstall the drive recovery again and the problem persists. I also tried the solution posted on other peoples issues this using prompt command and it turns out unsuccessful. I also tried to install the Windows Update Agent, which is recommended by some, it starts to install and I get an error saying that it is impossible to install PowerShell. If anyone has any alternatives, I try (in addition to those I've already tried) Please help! Thank you for your time.

  Hi all.

  solution:

  Download the new technology Intel® Rapid storage (RAID) driver 11.6.0.1030 version

  of http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=21852&ProductFamily=Software+Products&ProductLine=Chipset+Software&ProductProduct=Intel%c2%ae+Rapid+Storage+Technology+ (Intel % c2% ae + RST) & lang = fra and install in "normal" mode.

  This works.

  The Windows update error code appears after a hard drive replacement, and most providers have only this driver in version 9. XX or 10.xx.

  This driver 11 version solves the problem with windows Update error A 8024, 000.

  (have this error on 5 different machinetypes (Samsung, HP, Sony Vaio, etc.) and are all now resolved).

• Downloaded and paid of Minecraft and having problems with Java, Anti Virus Scan and Windows Update - error code 800F081F

  Downloaded and paid of Minecraft and having problems with Java, Anti Virus Scan and Windows Update - error code 800F081F

  Would you advice, thank you.

  Hi Hugo,.

  1. what anti-virus software you have installed in the computer?

  2. What is the full error message/code?

  3. the issue occurred after you install Minecraft?

  4. are you able to play Minecraft without any problem?

  5. what happens with Antivirus and Java?

  Windows Update can occur if one or more of the following conditions are met:

  1. the Windows Update database is damaged.

  2. antivirus software is configured to scan the %Windir%\SoftwareDistribution folder.

  3. the service (BITS) Background Intelligent Transfer Service does not receive a content link header.

  4. a required system file is incorrectly registered.

  5. Windows Installer has encountered an error.

  6. the manifesto of component maintenance (EC) is damaged.

  7. the Windows Update service has stopped during the installation.

  8. a version of the file conflict exists with Windows Update agent files.

  Please follow the steps described in the methods to solve the problem:

  Method 1: We will try the steps from the following link and check the result:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058?WA=wsignin1.0

  Method 2:

  To correct the errors that occur when you use Windows Update, install, and run the system update readiness tool. The tool analyzes inconsistencies on your computer and fixes as its current installation.

  You can view the following link to download the system update readiness tool and check:

  System tool update that corrects problems of Windows Update is available for Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  http://support.Microsoft.com/kb/947821

  Details of the event log to find what caused the Antivirus and Java to fail:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Hope that the information provided is useful.

  For any help related to this problem or any question of Windows, you can still display in the Microsoft Community Forum!

• Windows update ERROR CODE 80240016

  Updates Windows installs, giving the error code 80240016: "other updates installing" it lasts for weeks about 28 items which will not install, although some things get stuck... I did the "fix it" already it does not SOLVE this problem.

  0 x 80240016 is to "try to install so that another installation happens or reboot is pending"

  See:

  Error message when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site: "0 x 80240016.
  http://support.Microsoft.com/kb/957307

  and/or

  Related topics

  Windows update-reception 80240016 error code when trying to update.
  "Windows Update error code 80240016" in Vista
  Error code 80240016 failed to update Windows Update
  Failure of Vista windows update - receive error code 80240016
  Cannot install the windows updates with error 80240016 and 646 code

• 66A and 41 d on 2 important Windows Update error codes

  Original title: Windows Update error codes

  Get continually updated "stranded" with error code 66A and 41 d on 2 important Windows updates

  Hi MaxineDonald,

  1. the updates are getting failed with this error code?

  Step 1:

  I suggest you to reset the Windows Update components.

  Access the link below and try the Fix mentioned in the article tool to reset the Windows Update components automatically:

  http://support.Microsoft.com/kb/971058

  Step 2:

  You can also try to download the stand-alone package with updates and try to install.

  a. download updates from the Microsoft download Center:

  http://www.Microsoft.com/downloads/en/default.aspx

  b. Enter the item number in the field search and download the same.

  c. double-click on the downloaded file.

  d. you can either click Run to start the installation or you can click on save and save it on the desktop and run the installation once the update is completely downloaded.

  Hope this information is useful.

• Windows Vista update error code: 80004002

  I'm running Window Vista, each test time for updating Windows, I am struck with error Code: 80004002.

  With this error, I was unable to watch film (using Windows Media Player ) that I recently downloaded from the Internet that come with the extension. ASPX

  Grateful for the help of all.

  THX n regards

  Steven ALT

  I'm running Window Vista, each test time for updating Windows, I am struck with error Code: 80004002.

  With this error, I was unable to watch film (using Windows Media Player ) that I recently downloaded from the Internet that come with the extension. ASPX

  Grateful for the help of all.

  THX n regards

  Steven ALT

  Hey steven ALT

  link below has information from microsoft about your error code

  Error message when you try to install updates by using Microsoft Update or Windows Update Web site: «0 x 80004002»

  http://support.Microsoft.com/kb/956708

  If that does not fix it repost in the windows update forum below

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  Walter, the time zone traveller

• Windows could not search for new updates (error code 80004002)

  Windows could not search for new updates and gives the error code "80004002" I tried to reinstall UpdateAgent (fatal error encountered) and I tried the MSFixIt and the automatic troubleshooter. Also tried everything to this forum and nothing helps: http://www.bleepingcomputer.com/forums/t/460975/windows-update-code-80004002/

  When I try the "sfc/scannow" it gives me that he can't sweep.

  I have looked everywhere and tried everything. Help me the microsoft community, you're my only hope.

  Hello

  Thank you for your update on the issue.

  Since you have already done SFC scan, I suggest you perform a repair installation (upgrade Inplace). There seems to be some corruption of system files and the repair facility should be able to fix them.

  Note: before proceeding with the installation of repair, I suggest you make a backup of all your data.

  Backup your files: http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files

  To perform a repair installation, follow the steps in the following article:

  How to perform an upgrade in Place on Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2: http://support.microsoft.com/kb/2255099

  I hope this helps. Please post back your results for assistance.

• Windows Update error code

  I have a new Toshiba laptop, running Windows 7 (Home Premium SP1 installed by the OEM). My internet connection works fine for all sites Web except it fails when I try Windows Update. Error message code is 8024402F. I already checked 'automatically detect DNS settings' I also tried disabling my firewall (McAfee) temporarily and tried without solution. I tried dozens of times in recent days.

  Any suggestions on how to fix this?

  Hello

  According to the Microsoft Knowledge Base, it has something to do with your Internet connection. Have you already checked the Microsoft Knowledge Base?

  Microsoft recommends disabling the security software (antivirus and firewall) and try the troubleshooting Windows Update tool as described here:
  [Code error Windows Update 80244016, 8024402f, or c80003fa | http://windows.microsoft.com/en-US/windows7/Windows-Update-error-80244016-8024402f-or-c80003fa]