Windows Update fails, laptop breaks down at the restart, Windows 7

I had to buy a new drive hard laptop to my Toshiba Satellite after the first one stopped working. I reinstalled Windows 7 and did all the required Windows updates. So I wonder to restart, as usual, and I do. The problem is, when it gets to the point where the laptop screen goes black, and it should restart, is not. It is just a black screen, no response to the pressing movement or the key of the mouse. I know that the laptop is still technically because that light on is still green. I let him sit there for at least an hour, but nothing happened. Then I had the power button to turn off the laptop completely, he did and he turned his back. The laptop then turns and begins to set up the Windows updates, but it fails. After that I can log into the computer, and I can see that the Windows updates fails. Now, I have done this several times and sometimes the windows updates will succeed, but every time the laptop computer fails to restart correctly, and when I turn it off and turn it back on, he always tells me that Windows updates fail to configure. The last group of Windows updates I tried to do, they all failed to do.

I just looked at the history of updates to Windows, and these are updates that failed

Each update for Windows 7 for x 64 systems.

Daily security for Windows 7 for x 64 EXCEPT KB3035126 systems.

Each Microsoft .NET Framework 3.5.1 security update

And each update Cumulative security for Internet Explorer 11

The only consistently successful updates have been

Update definition for Microsoft Security Essentials

Updates and security for Microsoft Office updates

and x 64 Windows malicious software removal tool

My laptop is a Toshiba Satellite C655D, it runs Windows 7 Home Premium 64 - bit (6.1, Build 7601), my processor is an AMD C-50 processor 1.GHz, I got 3072 MB of RAM, and my graphics card is an AMD Radeon HD 6250 graphics card. If you need further information, I will provide it to you. Thanks in advance for any help provided. I appreciate it.

Hello

Disable the antivirus and install updates, see if that helps.

Note: Please activate antivirus as soon as you check the issue.

If the previous step fails, perform a upgrade in Place (repair install).

How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

Note Run a repair installation will not damage files and applications that are currently installed on your computer.

Thank you.

Tags: Windows

Similar Questions

  • KB2887069 Windows update fails to install, even with the audio drivers and uninstalled AV

    KB2887069 Windows update fails to install, even with the audio drivers and uninstalled AV.

    Background: I am setting up a pavilion of 500-164 equipped with OEM specs, specifically:

    -AMD/Radeon APU

    -Windows 8 6.2.9200

    -See sysinfo below for more details

    The PC brought to the specifications of the plant, with all Windows updates applied with the exception of KB2887069, which breaks down at the update.  With the exception of troubleshooting the failure of the update, none of the changes have been made.  The Windows KB2887069 update fails to install as well through the automated process when tried manually via a direct download.

    Additional troubleshooting measures to date include:

    -Uninstall the software OEM AV (Norton), then by restarting.

    -Temporarily disable all the features of Windows Defender.

    -Temporarily uninstall the audio driver (IDT High Definition Audio CODEC) OEM.

    -Realization of an analysis of the SFC system (with no error found).

    Results: The Windows Update full KB2887069 with a failed State and produced the following results.

    2014-11-15 19:25:08:807 3488 1 b 84 Misc = logging initialized (build: 7.8.9200.17099, tz:-0500) =.
    2014-11-15 19:25:08:807 3488 1 b 84 Misc = process: C:\Windows\system32\wuauclt.exe
    2014-11-15 19:25:08:807 3488 1 b 84 Misc = Module: C:\Windows\SYSTEM32\wuaueng.dll
    2014-11-15 19:25:08:807 3488 1 b 84 Manager:
    2014-11-15 19:25:08:807 3488 1 b 84 Handler: START: Manager: installation CBS
    2014-11-15 19:25:08:807 3488 1 b 84 Manager:
    2014-11-15 19:25:08:807 3488 1 b 84 Manager start installation of CBS update BCA9DC69-8FB6-4B79-8E1B-E706B32B55C9
    identity of 2014-11-15 session 19:25:08:807 3488 1 b 84 CBS Handler: 30409011_3339369637
    the package identity 2014-11-15 19:25:08:807 3488 1 b 84 CBS Handler: Package_for_KB2887069 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.2.1.1
    2014-11-15 19:25:08:822 3488 1 b 84 Manager stand-alone installation with source=C:\Windows\SoftwareDistribution\Download\c3f79bd7f837c5015dba3018d0ab7d67\windows8-rt-kb2887069-x64.cab, workingdir = C:\Windows\SoftwareDistribution\Download\c3f79bd7f837c5015dba3018d0ab7d67\inst
    2014-11-15 19:25:12:567 3488 Manager e00 FATAL: CBS called error with 0x8007371b.
    2014-11-15 19:25:13:269 3488 1 b 84 Manager FATAL: full install of CBS update with type = 0, requiresReboot = 0, installerError = 1, hr = 0x8007371b
    2014-11-15 19:25:13:378 3488 1 b 84 Manager:
    2014-11-15 19:25:13:378 3488 1 b 84 Handler: END: Manager: installation CBS
    2014-11-15 19:25:13:378 3488 1 b 84 Manager:
    2014-11-15 19:25:13:378 880 fa0 Agent *.
    2014-11-15 19:25:13:378 880 fa0 Agent * END * Agent: installing updates [CallerId = wusa]
    2014-11-15 19:25:13:378 880 fa0 Agent *.
    2014-11-15 19:25:13:378 6676 1a0c COMAPI > COMAPI - RECOVERY -: install [ClientId = wusa]
    2014-11-15 19:25:13:378 6676 1a0c COMAPI - tender installation complete (successful = 0, succeeded with errors = 0, failed = 1, missing = 0)
    2014-11-15 19:25:13:378 6676 COMAPI - restart required 1a0c = No.
    2014-11-15 19:25:13:378 6676 1a0c COMAPI - WARNING: exit code = 0x00000000; Call error code = 0 x 80240022
    2014-11-15 19:25:13:378 6676 1a0c COMAPI-
    2014-11-15 19:25:13:378 6676 COMAPI COMAPI - END - 1a0c: install [ClientId = wusa]
    2014-11-15 19:25:13:378 6676 1a0c COMAPI-
    2014-11-15 19:25:17:605 6676 1 a 10 COMAPI - COMAPI: IUpdateServiceManager::RemoveService -.
    2014-11-15 19:25:17:605 6676 COMAPI 1 has 10 - ServiceId = {b043431c-3a5f-4bf5-b5b2-34a542b07e41}
    2014-11-15 19:25:17:683 6676 1 a 10 COMAPI IUpdateService removal scan volatile package service, serviceID = {B043431C-3A5F-4BF5-B5B2-34A542B07E41}
    2014-11-15 19:25:17:683 6676 1 a 10 COMAPI WARNING: ISusInternal::RemoveService failed, hr = 80248014
    2014-11-15 19:25:17:683 880 524 Agent WARNING: WU client omits CClientCallRecorder::RemoveService with error 0 x 80248014
    2014-11-15 19:25:18:385 880 1a7c report REPORT EVENT: 2014-11-15 19:25:13:378 - 0500 1 182 {807311FF-2CC0-45E2-B903-238AD59E6377} [AGENT_INSTALLING_FAILED] {3CE1E1A4-CA14-4F2A-BEA1-71029F73AFD6} 101 501 8007371 b wusa error content install Installation error: Windows failed to install the following update with error 0x8007371b: update security for Windows (KB2887069).
    2014-11-15 19:25:18:385 880 1a7c report CWERReporter::HandleEvents - WER report upload completed with status 0 x 8
    2014-11-15 19:25:18:385 880 1a7c WER sent report: 7.8.9200.17099 0x8007371b (0x8007371b) 3CE1E1A4-CA14-4F2A-BEA1-71029F73AFD6 install Unmanaged 101
    2014-11-15 19:25:18:385 880 1a7c report CWERReporter finish event management. (00000000)
    2014-11-15 19:35:18:718 880 1 to 28 in THE # to THE: initialization of automatic updates.
    2014-11-15 19:35:18:906 880 1 to 28 WuTask WU Uninit Manager tasks
    2014-11-15 19:35:19:795 880 1-28 Service *.
    2014-11-15 19:35:19:795 880 1-28 Service * END * Service: out of Service [exit code = 0 x 240001]
    2014-11-15 19:35:19:795 880 1-28 Service *.

    I find it peculiar that you just bought a HP computer brand new, still-in-the-box, which came with Windows 8, not 8.1, preinstalled Windows. That said, cross your fingers, roll up your sleeves and try the fix following multiple step, I cooked up just for your computer...

    ACTIONS

    [You may want to print these instructions for reference offline.  IMPORTANT => NO SKIP & perform all steps in one uninterrupted session!  [If a step said to restart, restart! ]

    1 right-click on the link, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    2. close all open applications (that is, anything with an icon on the taskbar).

    3. right click on the file that you saved in step #1 above and select run as administrator to run the Norton utility. DO TAP not your keyboard until the race ends, then restart.

    4. right-click on the following link and save the download to your desktop: ie8 - rereg.all.zip [1]

    4B. right click on the file that you saved in # 4 has & select EXTRACT ALL. This will create a new folder in Office also appointed ie8 - rereg.all. The folder contains both scripts below (plus a third that will NOT be).

    Note-online scripts are good for IE9, IE10 & IE11, too,

    5. close all open applications (that is, anything with an icon on the task bar), open the folder created in step # 4 b above & double-click on the file named ie8 - rereg.32on64.cmd to run the script.

    5 b. Repeat this for the file named ie8 - rereg.64on64.cmd then restart.

    6. reset Internet Explorer by the MANUAL of instructions on this page-online http://support.microsoft.com/kb/923737

    Note => for best results, check the option Remove personal settings .

    7 run the Windows Update Troubleshooter from start to finish by the first paragraph on this page-online http://windows.microsoft.com/en-us/windows-8/troubleshoot-problems-installing-updates [2]

    8. restart once more then test by launching a manual check of updates & see if KB2887069 any/all others updated and allows to install now. Follow all the instructions.

    9. assuming all went well, see if Windows 8.1 is available through the store Windows and, if so, if it will be properly installed. Still, follow all the instructions.


    http://Windows.Microsoft.com/en-us/Windows-8/update-from-Windows-8-tutorial
  • What's new in Win8.1?
    http://Windows.Microsoft.com/en-us/Windows-8/whats-new

    • 10. assuming that Win8.1 is now installed, perform another manual check for updates & install all Security updates offered (if any); Follow all the instructions.

    11. in response to this post with a status report. Also confirm (hopefully) that Windows 8.1 has been installed successfully.

    Good luck!

    ===========================================================
    [1] source: page http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en of my colleague IE MVP Kai Schatzl

    [2] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  • recommended security cumulative ie8 and compatible display updates fail. can install it with the installer of standalone download but then ie8 does not connect. If I remiove update ie8 works very well

    recommended security cumulative ie8 and compatible display updates fail. can install it with the installer of standalone download but then ie8 does not connect. If I remiove update ie8 works very well

    Hi mikedav,

    Thank you for using the Microsoft Windows Vista Forums.

    Method 1:

    Microsoft has released a new "Fix it" solution that should automatically solve your problems with Windows Update.  Just click on the link below and follow the instructions.

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    If you are not able to connect to the internet after you install the update, you need to optimize Internet explorer by following the instructions below.

    Method 1:

    Follow the instructions in the link below which will help you solve the problem.

    Tips for solving problems with Internet Explorer

    http://windowshelp.Microsoft.com/Windows/en-us/help/8038f9ac-9bf9-4809-8d75-fc42818d8af71033.mspx

    Method 2:

    Follow the instructions in the link below to optimize Internet Explorer.

    How to optimize Internet Explorer

    http://support.Microsoft.com/kb/936213

    Please post back and let us know if it helped to solve your problem.

    Kind regards

    KarthiK TP

  • Update failed.  Impossible to extract the downloaded files. (U44M11210)

    Creative Cloud poped upward and he said there where available updates.  I clicked through to say things move forward and update applications that need them.

    For the bridge, I get the error:

    -------------------------------------------------------

    There was a problem of bridge CC update

    For more information, see the specific error below

    -------------------------------------

    Update failed

    Impossible to extract the downloaded files. Press Retry to download again.

    (U4411210)

    ------------------------------

    (Link): contact customer support.

    -------------------------------

    I click on the link and it got me right here:

    http://helpx.Adobe.com/creative-cloud/topics/getting-started.html  (page of General information and not help whatsover_)

    Then I opened a chat support window and after waiting 15 minutes chat support guy told me that he couldn't help me and I'm going to phone during opening hours.

    Creative cloud costs $50 per month and Microsoft Office 365 costs $24 per month for their top plan which includes the largest value of Creative Cloud product (Office Premium Destop on 5 (not 2) machines, Office Web Apps on any machine, Exchange Online, SharePoint Online, Lync and Skydrive Pro more a Public facing Internet site with your own domain name.)

    But in more more product for the money, Microsoft provides telephone support 24 hours a day for Office 365.  Everything for 24 $par month.

    How Adobe can be expected to ask for $50 a month and does not supported 24 hours a day?

    It's an el etc, not M one one etc.

    http://forums.Adobe.com/thread/1095895

  • My iPAD asks me to update to OS 9.3, but the update fails because it says that the iPAD is not connected to the internet and when I connect to my computer iTunes it say my OS is up to date.  Help, please.

    My iPAD asks me to update to OS 9.3, but the update fails because it says that the iPAD is not connected to the internet and when I connect to my computer iTunes it say my OS is up to date.  Help, please.

    I'm surprised to hear that for an iPad 2 that the issue had apparently been set for 2 s. Please see this for more details as I know them. Maybe the servers at your site have not been updated yet for the new version of the iPad 2.  ???

    Apple released the update iOS 9.3 for older devices (air of iPad and previous iPhone, 5 s and previous) due to problems with Activation. See the following for details and possible solutions.

    http://www.IMore.com/Apple-working-iOS-93-fix-older-iPhone-iPad

    https://support.Apple.com/en-us/HT206203

    A new version for the iPad 2 is now available which does not require the activation step. A new version for other devices is not yet available.

  • Windows updates fail to download and install the new

    Good afternoon

    I recently bought this satellite laptop computer pro on the package was both windows vista Home premium. I also decided to change fnsi at the same time. The provider also gives Norton Firewall Virus Intrusion etc etc.

    Microsoft does not validate my system but after that 2 hours on the phone with them and a system restore, they have agreed that I had bought some valid stuff and that fixed it.
    Now it seems windows updates icon appears ask me do I want to download and install.

    I do but every time, it fails, there are about 11 things that fail, no installation. I rang Microsoft today that they made one or tow things say but PC Toshiba's fault.

    Please, anyone had this happen to them and got the solution (s)?
    Please take into consideration that my knowledge of pc can be written on the back of a postage stamp. Do like me simple.

    Thank you

    Did you try to disable the firewall or uninstall Norton? Norton may block the Internet connection.

    If the provider uses a Proxy Server, you need to enter the proxy in Internet Explorer connection settings.

  • Satellite Pro A300 - recovery disc breaks down at the start

    Hi, hope someone can help you.

    Laptop has stopped working - continues to try to solve the problem via windows on startup but that hangs just for hours so I ordered a recovery disk to start a new as I think that the initial problems were caused by a virus. I have no important data to keep so am OK with clearing everything and reboot. Today. I just received my product recovery disk I ordered at Toshiba. I followed the instructions; load the disc, power over the holding of C. Then it continues just as if the recovery CD was not in the drive. The CD player is not turning. Its as if the laptop does not recognize the drive.

    Any ideas?

    Hello

    Well, either i s something wrong with the recovery disk itself or the reader doesn't see the drive correctly

    What happens if you go to the BIOS boot menu (F12 key) and select the CD/DVD drive as the boot device?
    If it doesn't work try another bootable disk to make sure that the drive works properly.

  • Windows 10 update fails again and again with the error Code C1900101

    I tried for months to upgrade to Windows 10 and it fails every time.  It downloads the whole thing and then after reboot, and it's 40% full, it stops and says it fails and then it restarts again and he returned to Windows 7.

    My computer is a gateway DX4831 Office 64 - bit OS with Windows 7 Home Premium.  I have read several of the discussions on this subject and tried "fixit" and a "clean boot" and continues to be the same thing.

    I would be very happy for someone who can help a week away from being the deadline for upgrade.

    Thank you!

    If the upgrade of Windows 10 Assistant becomes blocked or unresponsive to different percentages: 0%, 32%, 62%, 87%, 99%, please wait at least 4 to 7 hours. If the installation program does not progress, close the wizard and restart your computer. Follow the instructions to upgrade manually by using the tool of creation of media or file ISO for Windows 10.

    If you find it difficult to do some of the steps below, please see instructions how do their:

    http://windows10forum.com/blogs/entry/3-How-to-ensure-a-smooth-upgrade-to-Windows-10-anniversary-update/

    If you encounter an error about enough space to perform the upgrade, see the instructions:

    How to install Windows 10 on devices with limited space

    Task of pre-required

    When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

    Retry the upgrade manually:

    Option 1: Using the media creation tool

    Download the media creation tool

    Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

    Note: How to check if you are downloaded or installed the update Windows 10 November

    Select upgrade this PC now and then click Next

    Option 2: upgrade using the file ISO for Windows 10.

    Task of pre-required

    When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

    then

    then

    • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
    • Reboot several times, and then try again.
    • Disable the general USB peripherals (for example - smart card reader). You can do so from the Device Manager.
    • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
    • Support your default BIOS reset BIOS.
    • Check if there BIOS updates available for your system, and then to apply them.
    • If you are using a SCSI drive, make sure you have the drivers available for your storage on a USB device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
    • Perform a clean boot, restart, and then try again.
    • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
    • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
    • If this does not work, try using the. ISO file to upgrade if possible.
    • If you are connected to a domain, go to a local account.

  • Windows Update fails to run and get the C800044E error code

    Windows Update does not check the updates and I get the C800044E error code.  So far, thi is what I did:

    Get the C800044E error code when you try to run Windows Update.  Tried Mr. FixIt, who did not work and tried to do what does not work also:

    Please, try the following suggestions to see if the problem can be solved:

    1. click on Start, type notepad in the start search box and press ENTER.

    2 copy and paste (or type) the following command lines in the Notepad window:

    net stop wuauserv

    CD %systemroot%\SoftwareDistribution

    Ren Download.old download

    net start wuauserv

    3. on the file menu, click on record under and type Rename.bat .

    4. click on save as type and then click on all files (*. *) .

    5. save the Rename.bat file to your desktop.

    6. right click on the Rename.bat file, and then click run as administrator .  If you are prompted for an administrator password or for confirmation, type the password, or click continue . It renames the download folder.

    7. try to install the updates again.

    8. If the problem is resolved, delete the Rename.bat file that you created in the previous steps.

    any other ideas?

    Quote your full version of Windows (for example, WinXP SP3;) Windows XP 64 - bit SP2; Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

    Is this a sudden, new problem?

    Are you having difficulty he run in http://support.microsoft.com/default.aspx/kb/971058 and don't you run it in default and aggressive modes?

    What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

    A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Windows updates fails to 11% and get the error: 80070020

    Original title: 80070020 + 11%

    Update Windows with downloading to 11% with Error 80070020!

    Hello

    Thanks for posting! If I understand correctly, you are facing a problem with the installation of the updates. Correct me if I'm wrong!

    Before I continue, I would like to collect some personal information.

    1. have there been recent changes to the system before the show?

    2 is the issue limited to the specific update?

    3. do you have security software installed on the system?

    Method 1:

    Follow the link and follow the steps. Check if it helps.

    Windows Update Error 80070020

    http://Windows.Microsoft.com/is-is/Windows-Vista/Windows-Update-Error-80070020

    Method 2:

    Follow the link and follow the steps. Check if it helps.

    You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates

    http://support.Microsoft.com/kb/883825

    Note: Once you are done with the boot, follow step 7 in the link to your computer in normal mode.

    Note: make sure that you enable the antivirus software once you have completed troubleshooting.

    Method 3:

    Follow the link and follow the steps and check if it helps Reset Windows Update components.

    http://support.Microsoft.com/kb/971058

    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    http://support.Microsoft.com/kb/322756

    Answer us with the results. I'd be happy to help you further.

  • Player Windows Embedded 10.1.2 breaks down using the typewriter tool

    Since 10.1.2 drive my typewriter tool documents do not work correctly in an integrated Adobe Reader window, for example in Firefox or Internet Explorer.

    Open the first file to http://www.ld-didactic.de/software/1.pdf shows the typewriter as usual tool window.

    Open the second file to http://www.ld-didactic.de/software/2.pdf does not display the typewriter tool window more.

    Also, the first new opening document will not display the typewriter again tool window. Instead the player often crashes while loading several documents of typewriter or by closing the built-in player.

    I tested it with Adobe Reader 10.1.2 in Firefox and Internet Explorer on Windows Vista and Windows 7 x 64 systems. He has worked with Adobe Reader 10.1.1.

    Can anyone reproduce this problem?

    Michael

    This issue seems to be fixed with Adobe Reader 10.1.3.

    Thank you

  • Photos breaks down on the opening.

    Photos crashes everytime at the opening. Here is the stack trace...

    Process: Photos [28428]

    Path: /Applications/Photos.app/Contents/MacOS/Photos

    ID: com.apple.Photos

    Version: 1.5 (370.42.0)

    Generation information: PhotoApp-370042000000000 ~ 1

    Code type: X 86-64 (Native)

    Parent process:? [1]

    Officials: Photos [28428]

    User ID: 502

    Date/time: 2016-04-20 09:18:21.403-0700

    OS version: Mac OS X 10.11.4 (15E65)

    Report Version: 11

    Anonymous UUID: F39D044F-57BD-4F44-51FD-6BA1312F703C

    Sleep/wake UUID: FCA63ADC-217C-4891-BBAC-FCB772121610

    Time since started awake: 120000 seconds

    Wake time: 1000 seconds

    Integrity of system protection: enabled

    Crashed Thread: the queue on the expedition 10: OpenGL context pool

    Exception type: EXC_CRASH (SIGABRT)

    Exception codes: 0 x 0000000000000000, 0 x 0000000000000000

    Note the exception: EXC_CORPSE_NOTIFY

    Request for clarification:

    Failure of the assertion in + [PAOpenGLDevice _sharedContext], /Library/Caches/com.apple.xbs/Sources/PhotoApp/PhotoApp-370.42/lib/paimaging/Ph otoApps / PAOpenGLDevice.m:220

    Failed to create the shared context: Invalid context

    Abort() called

    first step is to shut down the computer and restart - which can solve

    LN

  • KB2656374 update failed to install and get the error code 80070020

    Try to install update KB2656374 and get the error code 80070020. How can I fix this please?

    Hello

    1. who is the antivirus installed on the computer program?

    2 have you made any changes to the computer before the show?

     
     

    Perform the steps described in the article:

    You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates

    http://support.Microsoft.com/kb/883825

     
    WARNING: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
     
     

    I hope this helps.

  • ACS 3.2 breaks down when the RDBMS isn't available.

    Someone knows a problem connecting equipment that auths to ACS 3.2 if their ACS (ODBC) login record is down?

    I have not checked this bug yet but we have picked up our computer (postgresql) of ODBC logging, it was moved to another building. Throughout the weekend that the computer was down and I couldn't log into any of my ACS devices controlled (switches, AS5200). As soon as the computer was brought back online connections have started working again.

    I did not see this listed in the notes, but I may have missed. In any case I'm check if anyone else has experienced this problem and ask yourself how do I solve this problem (at least it was a bad surprise, luckly I hadn't started wireless auth to the GBA unit)

    Thank you

    Wes

    It is likely, although probably not documented anywhere.

    At the time current ACS works as follows:

    When ODBC is configured, ACS blocks authentication until the

    Log ODBC is done or has failed due to the delay. The failure of ODBC timeout

    occurs when the external database is unreachable. In this case, the

    authentication fails if this delay is longer than the

    timeout for the device.

    Workaround to activate authentication despite the failure of logging is to increase the radius-server on the device/NAS (for example time-out

    5 to 10 seconds). It can be done using the following CLI command:

    "radius-server timeout 10". You may need to increase it even more depending on how long the wait time is on your ODBC database.

    There is an enhancement request in to have the GBA behavior has changed, you can see here (http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCeb21974&Submit=Search). Because he considered a request for improvement, don't hold your breath waiting for that, playing with delays so that you don't get hit by it again.

  • Time Machine breaks down during the work week, working all weekend after preferences rebuilt

    End of 2013 the MacBook Pro 13 "Retina display, 16 gig RAM, OS x 10.10.5, gigabit networks are home and work, NAS at home only.

    MacBook is used as working on simple business network machine all week. Time Machine off and save a couple hundred K and then crashes when I connect to home network at night. Same thing happens when I return to the home network for the weekend. I have disable TM, kill the TM preferences, restart to create new ones, back up on my home network NAS all weekend without problem. I turned off TM before going to work on Monday and back at home Friday night, and it fails. If the routine is now restore preferences TM Friday night, let the backup of its contents all weekend, turn off TM and go to work all week.

    I would like to have the security of offline backup that comes with the TM run all the time.

    It was suggested elsewhere to rebuild the Spotlight database. It did not work. I use locate on the command line and have rebuilt the database too.

    Any suggestions?

    A device third-party network attached storage (NAS) or a router is unsuitable for use with Time Machine, especially if it's your only backup. I know that's not what you want to hear. I know that Time Machine accepts the device as a backup destination. I know that the manufacturer says the device will work with Time Machine, and I also know that it usually seems to work. Except when you are trying to restore and find that you can't.

    Apple has published a specification for network devices that works with Time Machine. No third party provider, AFAIK, does meet this specification. They all use the application of Netatalk incomplete, obsolete Apple Filing Protocol.

    Apple does not endorse any device third-party network for use with Time Machine. See this support article.

    Network backup, use as destination an Apple Time Capsule or an external storage device connected to another Mac or a 802.11ac AirPort base station. Only 802.11ac base stations support time Machine, not older model.

    Otherwise, use Time Machine at all. There are other ways to save, although none of them are nowhere near as effective or as well integrated with OS X. I don't have a specific recommendation.

    If you are determined to continue to use the device with Time Machine, your only remedy for any resulting problem is the manufacturer (who will blame Apple, neither you nor anyone else but herself.)

Maybe you are looking for