Windows update fails to download and install updates and cannot start defender and windows firewall.

Similar Questions

• Windows updates fail to download and install the new

  Good afternoon

  I recently bought this satellite laptop computer pro on the package was both windows vista Home premium. I also decided to change fnsi at the same time. The provider also gives Norton Firewall Virus Intrusion etc etc.

  Microsoft does not validate my system but after that 2 hours on the phone with them and a system restore, they have agreed that I had bought some valid stuff and that fixed it.
  Now it seems windows updates icon appears ask me do I want to download and install.

  I do but every time, it fails, there are about 11 things that fail, no installation. I rang Microsoft today that they made one or tow things say but PC Toshiba's fault.

  Please, anyone had this happen to them and got the solution (s)?
  Please take into consideration that my knowledge of pc can be written on the back of a postage stamp. Do like me simple.

  Thank you

  Did you try to disable the firewall or uninstall Norton? Norton may block the Internet connection.

  If the provider uses a Proxy Server, you need to enter the proxy in Internet Explorer connection settings.

• KB3069114 fails to download and install

  Hi - I use windows 8 and have repeatedly tried to get this latest update to install, but no luck. I ran the troubleshooting of Windows Update as an administrator, someone who said it fixed problems, but the file will not download and install, at - it answers?

  I noticed a new '' recommended '' updated today (KB3096053) and digging in the docs on the subject, found that:

  "This update addresses an issue in which you may not be able to install the updated security 3069114 because of the corruption that occurs during installation." After you install the 3096053 update 3069114 update can be installed successfully. "

  It worked for me when none of the previous mentioned fixes only.

  Of course, this will not help if your updates have been suspended since the previous issue. Try the fixes mentioned previously to get the updates rolling again, install this new recommended update, and then show or check the 3069114 and you should be good to go.

• Failed to download or install the new version of firefox

  I use windows 7 64-bit os laptop Dell inspiron 15R. My firefox browser was current until a few days before. Then soon it started crashing. No way I could support a window open for more than a few seconds. (If I restart the system it can last for a few minutes) Finally, as a last response I uninstalled firefox and downloaded the latest version (Firefox Setup 25.0.1). But now, when I tried to run the Setup file, it says that I can't run in the version of widows I use. but, I've been using firefox in the same machine for years! then another link, I downloaded Firefox Setup Stub 25.0.1. But running this file does nothing! It shows "Download" for hours without progress. Now, I was able to install a former 16.0.2 configuration file but I could certainly be upgraded. How can I upgrade to the latest version. I simply loved firefox than any other browser and I used it for years. This is the first time that I face this big headaches. Please help me understand this. (Thanks in advance for reading of patients)

  Do not try the old versions.

  I have two methods, you can try ninite use trying to install Firefox, http://ninite.com/firefox/

  Or download and install from http://mozilla.mirrors.tds.net/pub/mozilla.org/firefox/releases/latest/win32/en-US/Firefox%20Setup%2025.0.1.exe

  If you get an error message please put the exact error message and installation when you had in this thread.

• Failed to download or install

  I am running Windows Vista PC & having a problem downloading Shockwave Player.  First of all, I uninstalled the old program of programs and features.  All I get is a message from the I.E.9 browser that indicates that it cannot run add it on after I click the button install.  I've disabled my firewall & security programs with do not change.

  I just downloaded and installed the latest version using my browser Firefox from Mozilla on the same computer.  I have not encountered any problems.  Why it install on my Internet Explorer 9 browser?

  Thanks in advance

  Try to download and run the MSI installer

• P580 BIOS update. Cannot start computer.

  I was preparing to install Windows 8.1 and read on the site of Lenovo I should get the bios update.

  http://support.Lenovo.com/en_US/research/hints-or-tips/detail.page?docid=HT073634

  On this site, I clicked to download and install the BIOS. Once the system is restarted, I got this message immediately.

  Hi DivineSire,

  As far as I KNOW, the Dolby Home Theater is included when you install the audio driver.

  If you have a device his Conexant, try to uninstall the current (including Dolby) and install the one below:

  Conexant Audio driver
  audio130w81.exe
  185 MB

  Concerning

• Service of Windows 7 SP1 Windows update fails to download or install updates

  I have a fresh Windows 7 SP1 no sysprep build running in VMware Workstation 12.1.1 build-3770994.  When I run windows update to pull down the updates for this operating system, the first thing he does is download the Windows Update 7.6.7600.320 and then client looks like it is pulling down of 357 updates, but they never settle. I found them in the C:\windows| C:\Windows\SoftwareDistribution | Download the directory where to stay.  In programs of updates installed under control panel I have Hotfix for Windows (KB2534111) and (KB976902) installed and wndows udpate has the new top installed client. I installed as part of the construction of framework Microsoft .net 4.5.2

  This did never happen before the release of Windows 10?

  Here's what's in the WindowsUpdate.log file:

  2016-06-02 17:40:17:350 816 Agent 3 b 0 WARNING: has no rule Installed, updateId = {818701AF-1182-45C2-BD1E-17068AD171D6}.104, hr = 80242013

  2016-06-02 17:44:52:976 816 Agent 3B 0 * WARNING: impossible to filter the results of the search, error = 0x8024000B

  2016-06-02 17:44:52:976 816 3 0 b agent *.
  2016-06-02 17:44:52:976 816 Agent 3B 0 * END * Agent: finding updates [CallerId = AutomaticUpdates]
  2016-06-02 17:44:52:976 816 3 0 b agent *.
  2016-06-02 17:44:53:070 816 3 b 0 report REPORT EVENT: {6BB53B62-4F6C-4DB1-8281-C347E39A0B2E} 2016-06-02 17:39:58:421 - 0700 1 202 102 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates success content install Reboot completed.
  2016-06-02 17:44:53:070 816 3 b 0 CWERReporter finish event management report. (00000000)
  2016-06-02 17:44:53:070 816 7f0 report CWERReporter finish event management. (00000000)
  2016-06-02 17:44:53:241 816 7f0 Service *.
  2016-06-02 17:44:53:241 816 7f0 Service * END * Service: out of Service [exit code = 0 x 240001]
  2016-06-02 17:44:53:241 816 7f0 Service *.

  2016 06-02 808 9f0 Misc 17:47:45:933 = logging initialized (build: 7.6.7600.320, tz:-0700) =.
  2016-06-02 17:47:45:949 808 9f0 Misc = process: C:\Windows\system32\svchost.exe
  2016-06-02 17:47:45:949 808 9f0 Misc = Module: c:\windows\system32\wuaueng.dll
  2016-06-02 17:47:45:933 808 9f0 Service *.
  2016-06-02 17:47:45:949 808 9f0 Service * START * Service: Service startup
  2016-06-02 17:47:45:949 808 9f0 Service *.
  2016-06-02 17:47:46:121 808 9f0 Agent * WU client version 7.6.7600.320
  2016-06-02 17:47:46:121 808 9f0 Agent * Base Directory: C:\Windows\SoftwareDistribution
  2016-06-02 17:47:46:121 808 9f0 Agent * access type: no proxy
  2016-06-02 17:47:46:121 808 9f0 Agent * network state: connected
  2016-06-02 17:48:32:999 808 CWERReporter::Init successful 9f0 report
  2016-06-02 17:48:32:999 808 9f0 Agent * Agent: initialization of Windows Update Agent *.
  2016-06-02 17:48:32:999 808 9f0 Agent * prerequisite roots succeeded.
  2016-06-02 17:48:32:999 808 9f0 Agent * Agent: initialization of the global parameters cache *.
  2016-06-02 17:48:32:999 808 9f0 Agent * WSUS server:
  2016-06-02 17:48:32:999 808 9f0 Agent * state WSUS server:
  2016-06-02 17:48:32:999 808 9f0 Agent * target group: (Unassigned Computers)
  2016-06-02 17:48:32:999 808 9f0 Agent * Windows Update access disabled: No.
  2016-06-02 17:48:33:045 808 9f0 DnldMgr Download manager restoring 0 downloads
  2016-06-02 17:48:33:045 808 9f0 to THE # to THE: initialization of automatic updates.
  type of approval # to THE 2016-06-02 17:48:33:045 808 9f0: on demand (user preference)
  2016-06-02 17:48:33:045 808 9f0 to THE # scheduled install date and time: every day at 06:00
  2016-06-02 17:48:33:045 808 9f0 to THE # automatically install minor updates: Yes (user preference)
  2016-06-02 17:48:33:045 808 9f0 to THE # will interact with non-admins (Non-admins are high (user preference))
  2016-06-02 17:48:33:061 808 9f0 the installation phase to THE adjustment to THE planned for 2016-06-03 13:00
  2016-06-02 17:48:33:545 808 9f0 report * report: initialization of static data to report *.
  2016 06-02 808 9f0 report 17:48:33:545 * OS Version = 6.1.7601.1.0.65792
  2016 06-02 808 9f0 report 17:48:33:545 * OS Product Type = 0 x 00000004
  2016-06-02 17:48:33:576 808 9f0 report * computer brand = VMware, Inc.
  2016-06-02 17:48:33:576 808 9f0 report * computer model = VMware virtual platform
  2016-06-02 17:48:33:576 808 9f0 report * Bios revision = 6.00
  2016 06-02 808 9f0 report 17:48:33:576 * name of Bios = PhoenixBIOS 4.0 Release 6.0
  2016-06-02 17:48:33:576 808 9f0 report * the Bios Release Date = 2015-07 - 02 T 00: 00:00
  2016-06-02 17:48:33:576 808 9f0 report * locale 1033 = ID
  2016-06-02 17:48:33:623 808 to THE 9f0 successfully wrote event to THE health state: 0
  2016-06-02 17:48:33:623 808 9f0 updates to THE initializing featured
  2016-06-02 17:48:33:623 808 9f0 to THE Found set 0 cached updates featured
  2016-06-02 17:48:33:623 808 to THE 9f0 successfully wrote event to THE health state: 0
  2016-06-02 17:48:33:623 808 to THE 9f0 successfully wrote event to THE health state: 0
  2016-06-02 17:48:33:623 808 9f0 to THE delayed finish to initialize
  2016-06-02 17:48:33:623 808 9f0 to THE #.
  2016-06-02 17:48:33:623 808 9f0 to THE # START # to THE: research updates
  2016-06-02 17:48:33:623 808 9f0 to THE #.
  2016 06-02 808 9f0 17:48:33:685 to THE<## submitted="" ##="" au:="" search="" for="" updates="" [callid="">
  2016-06-02 17:48:33:872 808 a8c Agent *.
  2016-06-02 17:48:33:872 808 a8c Agent * START * Agent: finding updates [CallerId = AutomaticUpdates]
  2016-06-02 17:48:33:872 808 a8c Agent *.
  2016-06-02 17:48:33:872 808 a8c Agent * Online = No; Ignore download priority = No
  2016 06-02 808 17:48:33:872 a8c Agent * criteria = "IsInstalled = 0 and DeploymentAction = 'Installation' or IsPresent = 1 and DeploymentAction = 'Uninstall' or IsInstalled = 1 and 'Installation' and = 1 RebootRequired = DeploymentAction or IsInstalled = 0 and DeploymentAction = 'Uninstall' and RebootRequired = 1".
  2016-06-02 17:48:33:872 808 a8c Agent * ServiceID = {9482F4B4-E343-43B6-B170-9A65BC822C77} Windows Update
  2016-06-02 17:48:33:872 808 a8c Agent * Search Scope = {Machine}
  2016-06-02 17:49:12:950 808 a8c Agent WARNING: has no rule Installed, updateId = {818701AF-1182-45C2-BD1E-17068AD171D6}.104, hr = 80242013

  I don't know where the above rule is or how to fix.  Microsoft has changed in the update of windows server that is causing the problem?

  Disconnect your computer from a network or network drive:

  http://Windows.Microsoft.com/en-GB/Windows-Vista/disconnect-your-computer-from-a-network-or-network-drive

• HP laptop: failed to download or install updates from Microsoft or HP since installing Windows 10

  I get messages that there are updates for HP and Microsoft 10 available... they're trying to download, even if no progress is saved, and the update history shows several failures in the installation.  It suggests problems of connection or configuration problems.  However, my internet connection works fine.

  Hi @FloridaJack,

  I'd be happy to help you if necessary because there are many models of HP laptops, I would need the model number.
  How can I find my model number or product number?

  You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows 10.  Please restart the laptop twice to make sure that all updates are completed!

  Here is a document that shows how update the drivers that do not work correctly with Windows 10.

  Please let me know.

  Thank you.

• Repeated (X 5 + weeks) failed to download and install SP3 WHP

  Download install & Windows Service Pack 3 for laptop Dell Inspiron 1300, running Windows XP Home Edition, Version 5.1.2600 fails because:
  1 / "service Pack 3 c:\windows\softwaredistribution\cff8ec753e88561d2ddb53e183dc05c3e\update\update.inf file is not correct.
  2 / the 0x8007F00C error code

  Please notify.

  John
  Lancaster

  0X8007F00C: STATUS_INVALID_INF_FILE
  This [file] is for a different hardware platform.

  Start | Run: (type) WINVER. [OK]

  After the second line of text in the window that appears.

  =============================

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  How to troubleshoot a failed installation of WinXP SP3
  http://support.Microsoft.com/kb/950718

  WinXP SP3 - read all the prerequisites for a successful installation
  http://msmvps.com/blogs/harrywaldron/archive/2008/05/08/Windows-XP-SP3-read-all-prerequisites-for-a-successful-installation.aspx

  Free installation and unlimited compatibility support for WinXP SP3 is available since April 14, 2008 to May 2009.  This support will cost U.S.$ 59 or by higher incident now.

  Note: Extended Support for WinXP (x 86) SP2 ends July 13, 2010. After this date, computers that run Windows XP SP2 will NOT be offered additional security updates critical (x 86), automatic updates do not work, and Windows Update Web site is not accessible until SP3 is installed.

  Does that mean if my version of Windows is no longer supported?
  http://Windows.Microsoft.com/en-us/Windows/Help/What-does-end-of-support-mean

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Failed to download or install SP1 on Windows Vista

  I have Vista Home premium on my laptop but it keeps trying to download SP1 but fails every time. I tried loading SP2, it won't let me without SP1 already loading. I tried to upgrade to Windows 7 but I do not have Sp1 it wont let me update also updates not 3ra update Windows for both files. Can someone tell what to do.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  Learn how to install Windows Vista Service Pack 1 (SP1)
  http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

• [ERROR] Package failed: 2 "download and start the application.

  Hi guys I started updating an older application now that I finally have my Z10 again. I opened the proyect of my old projects and intalled the new SDK.

  It opens and debugging-uploads it to the device without any problem, but trying to release the app it gives me this error.

  Packaging failed:2
  Info: Package created: D:/Dropbox/BlackBerry Apps/ndk-10.0.9-workspace-2/STC_Metro/arm/o.le-v7/STC_Metro.so.bar
  [ERROR] MANIFEST.MF: Invalid value '1.1.0.5.2' for attribute 'Package-Version'.
  [ERROR] MANIFEST.MF: Invalid value '1.1.0.5.2' for attribute 'Application-Version'.
  

  I'm stuck in the present and can not find the MANIFESTO. MF or the solution.

  Please guys help out me.

  I add descriptor the.xml file.

  
  
  http://www.qnx.com/schemas/application/1.0">
  
  
  
      
      com.example.STC_Metro3
      1.1.0.5
  
      
  
      
      es
      buildnum
  
      
  
      
      
  
      
      The STC_Metro application
  
      
      
  
      
      Persona
      gYAAgHCYEOJgie4dpCutABir7Gs
      core.media
  
      
      
  
      
          true
          none
          false
      
  
      
      
         
         icon.png
      
      
         
      
      STC Metro Mexico
      
         armle-v7
         STC_Metro
      
      
         Qnx/Cascades
         armle-v7
         STC_Metro.so
      
      
         armle-v7
         STC_Metro
      
      
         x86
         STC_Metro
      
  
      
  
      assets
  
      
      
          
      
      icon.png
  
      
      run_native
      
  
  
  

  You must use that three version numbers the 4th is handled separately as a build number and is optional.

  Momentics would normally put a red cross indicating an error in the xml file if you try to add more than three?

  Try to reduce to three and see if it works.

• Failed to download or install new gadgets

  I tried to install a new gadget, but it won't happen.  I seem to be able to download, but not install it.

  Tried a number of regular corrections listed in a lot of research without result.  The work and will install, but nothing new

  is recognized.

  Hi tomg12,

  Sandeep has suggested to use the clean boot to install the gadget. It was not clear from your answer whether or not you completed this troubleshooting step. If you have not completed this step, try it to make sure that the problem is not caused by a software conflict.

  If you have an other user account on this computer, make sure the behavior is present when you try to download the gadget.

• 09/02/2010 Update error, cannot start.

  I have a big problem with the update from last night.

  I am running Vista Home Premium edition and I left the update running last night, this morning, I check my pc and it tells me that windows startup failed.  I'm trying to start in normal mode and it crashes every time.

  I tried to boot into system recovery mode, but it asks me to enter the original disk of Vista to try to solve the problem. When I bought my pc, the package did not include the real disk.  I have to go back to the store to remedy or y at - it a solution?

  Thanks in advance
  L

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Try to install additional Manager - "cannot start the Volumes App Manager.

  I am trying to install a 2nd Manager, the installation went well and the service starts, but landing page displays "boot failure":

  ODBC::error: S0002 (208) [Microsoft] [SQL Server Native Client 11.0] [SQL Server] invalid object name 'svconfigurations '. : EXEC sp_executesql does SELECT TOP (1) [svconfigurations]. * FROM [svconfigurations] ORDER BY created_at DESC'

  I installed the native client SQL 2012 and updated the DSN (x 86 and x 64) to use this instead as a test driver, but it made no difference.  I followed the documentation and unchecked the box replace, so my main Manager is always fully operational.

  Any ideas?

  It was the permissions, but not to the msdb database.  I had set the default for the user [dbo] schema, but what worked was [db_owner] (he always had the db_owner role, btw).  Small change, began services, all systems go.

• I can't download or install my free InDesign trial whenever it happens to the cloud it comes up with error (-55) help

  Failed to download or install my free InDesign trial whenever it happens to the cloud it comes up with error (-55) help

  Hi Jessicam35650393,

  Please let us know when exactly this error pops up.

  To attach a capture in thread view screen, the specified item was not found.

  Alternatively, you can try to uninstall the creative Cloud Desktop application using uninstall the Adobe Creative Cloud desktop application

  Then reinstall Download Adobe Creative Cloud apps | Adobe Creative Cloud free trial

  Until then, refer to the help below links:

  Solve the common activation Adobe Creative Cloud (login) and questions (disconnect) disabling or error messages

  Error in downloading, installing or updating Adobe Creative Cloud applications

  Troubleshoot Adobe Creative cloud download, install and update questions

  Let us know if that helps.