Windows update fails to install service pack 3 for windows vista because of this error WindowsUpdate_80070663
WindowsUpdate_80070663
Windows update fails to install service pack 3 for windows vista because of this error WindowsUpdate_80070663 if anyone can help me I would appreciate
Hi Juan CarlosPatlan,.
Windows Vista has only two service packs. You'll find the troubleshooting steps in the links below useful.
Reset the Windows Update components
Troubleshooting of Windows Update (same steps for Vista)
If you are unable to install the updates, provide the following information:
- The full version of Windows you have installed
- KB # the update fails
- The troubleshooting steps you have tried
Tags: Windows
Similar Questions
-
I'm starting to load sp 3 and she's going through the installation but, by the end, a box appears that says that I'm not allowed and see my administrator. It is a single computer; I sign as administrator (I even tried signature the administrator mode without failure). SP 2 has been installed without any problems. How can I solve this problem to install SP 3?
I read somewhere that if this computer was used as a test for SP3 Beta site, it could be causes of the problem. Does anyone know if this is true, and if so, how can I know if my computer has been used for the test. I have no notes, but there is something in the back of my mind that says that several years ago, I sign up as a beta Test site.
Hello
1. have you downloaded the beta of Windows XP SP3 and installed version on the system?
For more information about installing Windows XP SP3, see the link provided below.
Steps to take before you install Windows XP Service Pack 3
-
After you install service pack 2 for windows vista
After installing service pack 2 for windows vista on my HP laptop, I started having a few problems. First off the computer would not go beyond the Welcome screen because he showed that an update was the installation (step 1 of 3:0 % etc.) and the computer reboots before finish. It kept the case whenever I started upward, even on safe mode. I tried to restore, but it would never be completed and nothing else would work. Now I can't go beyond the microsoft loading screen because it shows a black flat screen with no cursor. I can't enter safe mode. Help, please. Safe mode only shows the start screen but won't start so I can't access the control panel and tried to boot to the last known successful startup but it failed.
Hello
Try a startup repair and / or a system restore using a DVD of Vista from Microsoft
Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.
Here is the guide to repair Options using a Vista DVD from Microsoft.
If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.
http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/
Table of contents
- Overview of Windows Vista repair options
- How to perform an automatic repair of Windows Vista using Startup Repair
- Advanced Tools Overview
- Conclusion
If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.
Unfortunately, you have to buy it.
Here is a link to it:
http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.
http://support.Microsoft.com/kb/947366
And there is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...
http://social.technet.Microsoft.com/forums/en/itprovistasp/threads
Or you can repost you this link in the Windows Update Forum.
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all
See you soon.
-
I am installing service pack 2 for windows vista home edition I get the error not found 0 x 80070490
I try to install service pack 2 for windows home edition vista, I get the error not found 0 x 80070490 msicexec has an option to make extended logging, but spinstall/help shows all options.
Split of: http://answers.microsoft.com/thread/82972695-1d12-4a07-9d72-0f9928a68dc1
Hello
Apologize for the delay in response. Please see the following article to resolve the issue of Service pack 2 installation:
Error code 0 x 80070490 when you use Windows Update or Microsoft Update to install updates
Note: Make sure you back up your data before you perform a repair of Windows installation.
Hope this information helps. Back to us for assistance.
-
How to install Service Pack 1 for Windows Vista?
Please can someone help me on how to install service pack 1 for vista. I have tried almost everything, but no matter what I try it givng custody me of error codes. When I tried with automatic updates, it says download 0% done but no matter how long I leave it still says 0% done. I want it only on cos I bought the game and it does not load and when I checked for solutions it says I have to install service pack 1, which is impossible.when I won't to updates, it shows me it's there but it won't install it. I also tried tried to install with 5 independent languages, I think it was called and said, but when he got to the end I got another error code my computer came 7201 laptop computer and put aside this 1 problem everything works fine also I just bought this for £79.99 fom a 2nd hand shop have I got it for a bargain or I haven't paid on the side im guessing it is a good deal but I know very few calculates and im not big on their use
original title: VISTA SERVICE PACK 1 PROBSHello
wrong forum for your question
and when repost you it give error code when you use the stand-alone SP1 download
This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.
http://support.Microsoft.com/kb/947366
Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.
http://social.technet.Microsoft.com/forums/en/itprovistasp/threads
or repost in the Windows Update forum link below
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all
-
I want to install service pack 3 for Windows XP home, but it is said to back up the system first. How do I do that
Hello
Steps to take before you install Windows XP Service Pack 3
http://support.Microsoft.com/kb/950717How to use the backup utility to back up files and folders in Windows XP
http://support.Microsoft.com/kb/308422Thank you -
Try to install Service Pack 2 for Windows Vista and it says this "one or more system components that require the service pack are missing" need help?
Hi, Mksethompson,
What is your model of computer?
Error message when you try to install Windows Vista Service Pack 2: "one or more system components that require the service pack are missing."
http://support.Microsoft.com/kb/968279
Dell issue
http://en.community.Dell.com/support-forums/software-OS/f/3524/t/19278096.aspx
-
AFTER YOU INSTALL SERVICE PACK 1 FOR WINDOWS VISTA, MY COMPUTER WILL NOT START SAYS UNATTENDED, DLL
Follow these steps to try to solve your problems of boot.
Restore point:
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
Do Safe Mode system restore, if it is impossible to do in Normal Mode.
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
http://www.windowsvistauserguide.com/system_restore.htm
Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use:
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner:http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
See you soon.
Mick Murphy - Microsoft partner
-
Need to install Service pack 3 for Vista to download my Zune player
Just need to install Service pack 3 for Vista to complete my download to my Zune Player...
Thank you
LEA Shauna Toenniges
http://Windows.Microsoft.com/en-us/Windows/downloads/service-packs
As you can see not SP3 for Vista.
As you can see, the Zune Player requires XP with SP3 not Vista with Service Pack 3.
Requirements for the Zune Player-
http://www.Zune.NET/EN-AU/products/LearningCenter/zunesoftware/gettingstarted/pcreqs.htm
Microsoft Windows 7 (all editions), Windows Vista (all editions), Windows XP with Service Pack 3 (home, professional, Tablet PC, or Media Center Edition 2005 with Rollup Update 2) or Mac OS X with Boot Camp running Windows 7 or Windows Vista.
If you use a Windows 7 64-bit edition or Windows Vista, please click here to download the Zune software.
Software Zune will not work on versions of Windows prior to Windows XP SP3, all the versions of 64-bit of Windows XP or any version of Windows Server.
Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.
-
Cannot install Service Pack 3 for XP Home Edition
original title: Service Pack 3 for XP Home Edition
Although my computer is always automatically installed updates, I've never had Service Pack 3 installed. I can't access to Microsoft SP3 to install on my XP Home edition. How can I install SP3 now?
Hello
I suggest you only do following steps.Step 1:You can download the service pack 3 from the link, below, which is applicable to all versions of Windows XP.Step 2:
Perform the clean boot and install Service pack 3 for Windows XP.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally. -
Error code 800F0811 when you try to install service pack 2 for vista
Original title: error code 800F0811 when trying to install service pack 2 for vista tried booting in minimum mode and reset my compents windows update or where he worked?
When try to install service pack 2 for vista tried clean boot and reset my windows update components or where he worked? This two things were proposed during this same error that happened to a customer trying to download sp1
Hello
Review the information in the site mentioned below that can help you work with the question:
-
I tried to install service Pack 2 for vista on toshiba laptop each attempt I get error message80070005 (unknown error) is not on the list of errors does anyone know what this message, or how to correct the problem.
Hi Cassandra,
Check if the following might help.
Updated Windows error 0x80070005 - need a fix? Click here
See also:
How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
-
WindowsUpdate_80246007 - cannot install Service Pack 2 for Vista. Can someone help me with this error message? What di I do to solve it?
WindowsUpdate_80246007 - cannot install Service Pack 2 for Vista. Can someone help me with this error message? What di I do to solve it?
2 forums: you can go:
1 Windows Vista IT Pro forum, section of Windows Vista service packs:
Section of Windows Vista service packs:2. Windows Update section:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threadsFor the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.
-
How to install service Pack 3 for XP? I get "access denied".
I tried to install service pack 3 for Windows XP for some time, but with little success. Recently I have resubscribed to McAfee Total protection, but it will not be installed as Service Pack 3 is not installed on my system.
I get the message "access denied." What should I do to work around this problem?
I tried to install service pack 3 for Windows XP for some time, but with little success. Recently I have resubscribed to McAfee Total protection, but it will not be installed as Service Pack 3 is not installed on my system.
I get the message "access denied." What should I do to work around this problem?
Scroll down the page and run the FixIt.
-
Error code: 0x800F0826 - trying to install service pack 1 for vista
Error code: 0x800F0826 - trying to install service pack 1 for vista
It comes with Vista, upgrade install and activate Forum.
You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.
In this way, you will receive the best help.
See you soon.
Mick Murphy - Microsoft partner
Maybe you are looking for
-
incoming mail goes to two different accounts
How to stop incoming mail to go to two different accounts. Counting gmail.com and the other yahoo.com
-
Several errors in Final Cut Studio. I just need to reinstall everything?
Hi, I was tolerating a lot of mistakes in my Final Cut Studio edition for a while now, but I decided to try to correct them, because they really get in the way, I listed below... 1. I often get errors of the 'out of memory', especially when rendered.
-
Dear community OR,. I create the FileGlobals Variables as described in the attachments. Variables are created, but at the same time, all the existing ones if the FileGlobals file is deleted. Could someone help, please, how can I insert variables, no
-
After you create a new domain, I can not connect on the host computer.
For Windows Server 2008 2 RD, I tried computer name user password for the admin account domain\username, with no luck: (.) If anyone has other magical indices, please help. Thank you
-
I have 2 (square and sine) signals in the same interval of time, I need to get a trigger point sine wave (I did it with base trigger level VI) and I need now look for the last square base in a wave front of the sinewave trigger point. Logic as follow