Windows Update fails with Error 0x80072F76 on Windows 2003 server number

I try to run windows update on my windows 2003 server. The update fails with number 0x80072F76 Errow. The Windows Firewall/Internet service Connection Sharing (ICS) is stopped and the security settings on IE is set by default. IE version is 8. The Windows Update screen is also not displayed correctly.

You talk about servers, you use WSUS?

Forum specific support by WSUS:
http://social.technet.Microsoft.com/forums/en-us/winserverwsus/threads

Tags: Windows

Similar Questions

  • Windows Update fails with error [error number: 0x800A0007]-which is not listed

    Windows update fails with error [error number: 0x800A0007]-which is not listed, so unable to update the system

    The other post:

    Thank you for your reply - but the problem persists - this is mopre complete info.
    The system starts well and runs - BUT I cannot now be updated because when I access "Windows Update" it always returns this error message.
    Also, none of the messages in your "appliesto" step 2 recommended link will be applied effectively.
    As far as I know - we have a standard system and I just ran again ONCE a full system virus etc check - all clean.
    Also your "Mr Fixit" was performed several times, but nothing changes.
    Because it enters the update process, and then always closes with this specific message (which as I said is NOT in your list of error messages), which SHOULD tell your software writers where is the problem.
    This is what is happening in the process of updating before it fails:
    Keep your computer up-to-date
    Check to see if you need updates for Windows, your programs, your hardware or your devices.

    Get updates of high priority (recommended)  

    Select among the priority and optional updates for Windows and other programs

    ... and it does not matter if I say "express" or "custom" - headed then:

    Checking for updates for your computer...

    but fails after a few seconds with the same message as follows:
    [Error number: 0x800A0007]
    The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

    -However, it is the State of the system for more complete information for you:
     
    Name of the operating system Microsoft Windows XP Home Edition
    Version 5.1.2600 Service Pack 3 Build 2600
    Manufacturer of operating system Microsoft Corporation
    MISCHU06BLUE system name
    System manufacturer Compaq Presario 061
    ED865AA - ABA SR1610NX NA540 system model
    System Type X 86-based PC
    Processor x 86 family 15 model 47 Stepping 2 AuthenticAMD ~ 1790 Mhz
    Version/Date BIOS Phoenix Technologies, LTD 3.33, 17/08/2005
    SMBIOS Version 2.4
    Windows C:\WINDOWS directory
    System directory C:\WINDOWS\system32
    Boot Device \Device\HarddiskVolume2
    The local United States
    Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413 - 2111).
    MISCHU06BLUE\Compaq_Owner user name
    Time zone Pacific Daylight Time
    Total physical memory 1 024,00 MB
    Available physical memory 468,50 MB
    Total virtual memory 2.00 GB
    Available virtual memory 1.96 GB
    Page file space 1.51 GB
    Paging file C:\pagefile.sys

    Please get us some help to solve this problem.
    What else can I provide?

    I didn't ask if it was a new issue or a new problem, I asked if she was the same computer?

    [This applies to your recent 'me, too' answer to another thread.]

  • Vista premium sp2 updates fail with error 80070643 dt000

    Vista premium sp2 updates fail with error 80070643 dt000 I tried to fix the profile of .net framework 4 cliemnt but not resolved. It cannot update update software & MS updates almost obsolete year now. Ideas anyone please?

    Hi Ruth,

    Error code 80070643 is a generic error that basically indicate that an error has been detected by Windows Installer.

    Method 1:

    You can perform the steps described in the article.

    You receive error code 80070643 0 x or 0 x 643, code error when you use Windows Update or Microsoft Update web sites to install updates
    http://support.Microsoft.com/default.aspx/KB/958052

    If you have performed the steps in clean boot mentioned in this article, don't forget to put the computer to a normal startup by referring to the section "How to return a normal Windows startup mode" in this article once the diagnosis is complete

    Note: If you have already completed the steps in this article, you can go to the next method.

    Method 2:

    You may need to restart the Office Source Engine (OSE) service

    Windows Update error 80070643

    http://Windows.Microsoft.com/en-in/Windows-Vista/Windows-Update-error-80070643

    See also:

    Problems with installing updates

    http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-problems-with-installing-updates

    Hope this information helps. Response with status so that we can help you.

  • Update fails with error code 48 9.

    Original title: code9C48

    I get this update failed with... 9 ethical c 48... any information would be greatly appreciated... Thank you

    Hi TeresaReynolds,

    ·         Update fails with error code 9 48?

    ·         Are you facing this problem with a particular update or all updates?

    ·         Remember to make changes to the computer, after which the issue started?

    Try the following steps:

    Step 1:

    Temporarily disable the antivirus on the computer running software and check if it helps:

    Disable the anti-virus software

    Caution:
    Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Step 2:

    Reset Windows components updates default and check to see if it helps:

    How to reset the Windows Update components?

    I hope this helps.

  • kb953691and all updates fail with Error 8007000 b code

    I have a compaq presario pc sr5507f, all of the updates fail with Error 8007000 b code, when I start it up, he tells me that he don't find, msvcp71.dll, it will download internet 9 error code3715, it will be not to download microsoft lifecam 3.5 error, kb9953691, help help

    Hello

    You can check this link:

    Windows Update Error 8007000 b

    http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-8007000b

  • Update fails with error code 652 "WindowsUpdate_00000652" "WindowsUpdate_dt000" Is there a solution?

    Update for Microsoft XML Core Services 4.0 Service Pack 2 for x 64 systems (KB973688). UPDATE FAILS WITH ERROR 652, ENCOUNTERED AN UNKNOWN ERROR.

    Download size: 5.4 MB

    Update type: Important

    Jim,
    Take a look at this article and see if applies: Mike KB971187 - engineer Microsoft Support responses
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • System analysis tool update fails with error 0x800704c7

    After having the problem that Windows Update crashes on 'check updates', I followed the recommendations on http://windows.microsoft.com/en-ca/windows7/what-is-the-system-update-readiness-tool, installed the preparation tool system update, but unfortunately after several hours, it failed with error 0x800704c7. What can I do now?

    I'm on a Toshiba PC with Windows 7 professional service Pack 1 32-bit.

    If looking for updates to hang on a current installation,

    Be sure and go to uninstall a program and see which Microsoft Net framework you have installed.

    4.5.2 is more consistent to have installed,

    https://www.Microsoft.com/en-US/Download/details.aspx?ID=42642

    Switch your windows update setting to never check the updates temporarily

    Restart the machine

    You can try and install the latest client update manually let your update settings to never check for updates until you install it.

    https://support.Microsoft.com/en-us/KB/3138612

    Then you download this from your download folder run from there.

    https://TechNet.Microsoft.com/library/security/MS16-039?f=255&MSPPError=-2147217396

    Download the x 86 for 32-bit or x 64 for 64-bit

    Install it and restart when prompted too after he did a search of stand-alone for updates that should not

    take too long, it took all of 5 seconds, '' If '' windows update settings are turned on forever check

    updates before running from the downloads folder.

    Once it installs and restarts

    You can reset your updates affecting everything you had before default =...

    Then check the updates manually.

    I think that the solution came from Softpedia and Joel_CS posted on this thread,

    http://News.Softpedia.com/news/Windows-Update-hanging-when-downloading-April-12-patches-502886.shtml

    You must scroll down for Joel SC post threads, it is the last answer on this page,

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-hangs/dbd539c3-bfc6-42DF-a6ff-0e55ef7938eb?page=6

  • Update fails with error 8007057

    Tried to update windows Vista with Vista Service pack 2.  Update failed with code 80070570

    0 X 80070570 - ERROR_FILE_CORRUPT
    The file or directory is corrupted and unreadable.

    Suggestion:

    How to reset the Windows Update settings?
    http://support.Microsoft.com/kb/971058

  • Brother MFC-7820N update fails with error 80070490

    Original title: Brother MFC-7820N failed update

    Apparently, I have to use the construct in Windows 8 pilots for the Brother MFC-7820n (connected via a network). I can print fine, but cannot scan. None of the drivers of brother works for the installation of the scanner. After talking with brother, they said I should use Windows Update to get the latest drivers. I tried this several times, but the update fails with 80070490. Any ideas?

    Original title: Brother MFC-7820N failed update

    Apparently, I have to use the construct in Windows 8 pilots for the Brother MFC-7820n (connected via a network). I can print fine, but cannot scan. None of the drivers of brother works for the installation of the scanner. After talking with brother, they said I should use Windows Update to get the latest drivers. I tried this several times, but the update fails with 80070490. Any ideas?

    According to brother Tech Support, brother does not support scanning or PC to Fax printers MFC (connected Ethernet) network.  Here is a direct quote to support Brother on 24/11/12:

    «Currently we have everything planned out a complete set of MFL Pro Suite software (Control Center, send/receive PC - Fax, etc.).» Scan of the MFC
    on a network connection is not supported by the built-in support to
    Windows 8 operating system
    . "

  • Automatic update fails with error #16824

    I just deployed a new version of my app and AutoUpdate updates fail with the dreaded #16824 error.

    uithinez.png

    However, I have not upgraded my SDK between releases, nor I have changed anything in my other than the version numbers update.xml. And the build and deploy process is automated, so that should not have changed either. What could be going on here?

    Old update.xml:

    <?xml version='1.0' encoding='UTF-8'?> 
     <update xmlns='http://ns.adobe.com/air/framework/update/description/1.0'> 
       <version>2.1.22</version> 
       <url>http://ramp.leancoder.com/client/downloads/ramp.air</url> 
    </update>
    

    New update.xml:

    <?xml version='1.0' encoding='UTF-8'?> 
     <update xmlns='http://ns.adobe.com/air/framework/update/description/1.0'> 
       <version>2.1.26</version> 
       <url>http://ramp.leancoder.com/client/downloads/ramp.air</url> 
    </update>
    

    The two versions were built with:

    $bin/adt -version
    adt version "2.0.2.12610"
    

    This error, in this case, is the result of a self-signed certificate has expired.

    Generate a new certificate and using the "adt - migrate" command (description here) solved the problem.

  • (KB2378111, 12.0 MB, published 12/10/10) for Windows Vista security update failed with error 800b0100.

    Update of security (KB2378111, 12.0 MB, published 12/10/10) for Win Vista failed with the error 800b0100. Failure of several attempts, power, played external parser M.S., downloaded System Update Readiness Tool, saved the file on the desktop to install proxy server disabled by bike. Nothing has worked.

    Start a help tickethttp://support.microsoft.com/common/international.aspx?rdpath=1&gprid=9860>

    See the section "How to get help" of http://support.microsoft.com/kb/2378111

    Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

    Or you can...

    Start a free Windows Update support incident email request:https://support.microsoft.com/oas/default.aspx?gprid=6527

    Buying to meet problems installing Microsoft security updates also can visit the following page for assistance:https://consumersecuritysupport.microsoft.com/

    OPTION has:

    For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site:http://support.microsoft.com/common/international.aspx

  • Windows update fails with error '... DllRegisterServer was not found... ».

    I have exactly the same problem as http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/unable-to-install-windows-updates-error-power/f69a884d-c11c-4e9f-badd-12bafb61d091?tab=AllReplies&tm=1345292404518. The steps gave me the same exact results, as they are described by Ann l. a. at WILL. If the problem persists and I don't know what else to do. HELP PLEASE!

    Original title: Windows update fails

    The problem is solved with these steps (recommended by a microsoft technician):

    1. Click Start, all programs, accessories.
    2. Right-click on command prompt , and then click run as administrator.
    3. In the command prompt, type the following commands and press ENTER after each one.

      CD %windir%\System32
      net stop wuauserv
      net stop bits
      net stop cryptsvc
      Ren C:\Windows\SoftwareDistribution SD2
      net start wuauserv
      net start bits
      net start cryptsvc

    Thanks for the interest if!
  • Windows Update fails with error code 80073712

    Vista Home Premium SP2 32.

    According to the answer to the previous question on the same subject, I did everything suggested.

    Clean boot.  Made no difference.

    Reset components Windowes update as in the document 971058 (a) non-agressivement, b) in an aggressive manner.  Made no difference.

    12 updates have been identified to be installed.  11 crossed successfully.  Just KB2656374 fails every time with error 80073712.

    What is the next action suggested?

    Hello

    I suggest you try the steps mentioned below and check if it helps:

    Method 1: SFC scan run on the computer to ensure that the system files are intact:

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

     

    Method 2: tool for Description of the preparation of updated the system to Windows Vista, Windows Server 2008 and Windows 7, Windows Server 2008 R2

    http://support.Microsoft.com/kb/947821

    Hope this information is useful.

  • Windows Update fails with error 0x800f0830

    I have two laptops that were formerly running Windows 7 Professional Edition x 64 on a Server 2008 domain. Due to network problems are intractable, both have been restored at the factory using the Toshiba Recovery Wizard settings.  The chosen option was to retrieve the default values only keeping DO NOT user data. Everything seems to work, but two laptops boots into Windows 7 Home Premium x 64. It's OK, as we have for them use outside the field. Now, my problem is that I can't run Windows Update on each machine.

    Before you run the update of Windows, the following files are in the folder of the download of the Software Distribution folder:

    KB958559 (Windows Virtual PC) and KB958488 (Microsoft .NET Framework 3.5 SP1).

    Launch Windows Update and the updates, I get a message that I need to download an update from Windows Update. I click on update, he begins to search for the update and - error 800F0830. An extensive search on Google has barely turned anything on this error. It does not even appear in the list of troubleshooting of errors. The log of the Software Distribution folder shows "Download failed" and error code 800f0830 for KB958559 and KB958488.

    I tried the following steps to solve the problems:

    Run this utility to update Windows, set except x 0 80070003 errors. Update Services arrested Windows, renamed the Software Distribution folder. Tried new same outage updates.

    Windows Update service stopped, deleted the Software Distribution data files and download folders

    Run system, no found error update readiness tool

    Downloaded KB958559 manually and tried to install it manually. Installation failed with the same error 0x800f0830 code.

    Install the latest Windows Update Agent.

    I'm running out of ideas, but need to be addressed if we're going to use these computers on our network of comments. Any thoughts would be appreciated.

    Peggy

    The Microsoft Community Forums dedicated to helping home computer users. You use Windows Small Business Server, which is beyond the scope of these forums. I suggest that you ask your questions in the Microsoft TechNet forums where they will be better able to help you:

    https://social.technet.Microsoft.com/forums/en-us/home?category=SBSServer

  • Windows update fails with error code 57 (KB951847)

    Windows update fails when it encounters an unknown error while trying to install the following:

    Microsoft. NET Framework 3.5 Service pack 1 and. NET Framework 3.5 Family Update (KB951847) x 86

    Installation date: 13/11/09
    Installation status: windows has encountered an unknown error: code 57
    Update type: important

    Recently, I made a recovery of the pc and reformatted my entire hard drive to the issuance of the plant.  Yesterday, I downloaded a standalone installer (KB947821) to see if that would help.  He did not.

    I would like to have instructions step by step on how to obtain this update to install correctly.

    Thank you

    Quote your full version of Windows (for example, WinXP SP3;) Vista 64 - bit SP2; Win7 RC. Win7) when you post in a forum or a newsgroup. Please do it in your next reply.

    ===============

    Step #1 => foremost, note what version of .NET Framework is installed:

    How to determine what version of the .NET Framework is installed and determine whether the service packs have been applied
    http://support.Microsoft.com/kb/318785

    Step #2-online now see resolution method 2 in...

    When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows Installer '1603' (ignore the title, if necessary)
    http://support.Microsoft.com/kb/923100

    After running the tool that is appropriate and necessary, (re) install all versions of the .NET Framework (but the ones you noted in #1 above) manually using the download links on the page, and then run Windows Update manually install security updates for same.

    NB: If you remove the .NET Framework 3.5 SP1 by using the tool, reinstall .NET Framework 3.5 will also install .net Framework 2.0 SP2 and 3.0 SP2. Then, Windows Update will offer .NET Framework 3.5 SP1.

    IMPORTANT! =>, If you remove the .NET Framework 3.5 SP1, reinstall your version of .NET Framework in the following order:

    1. the .net framework 3.5, then...
    2 .net framework 1.1, then...
    3 .net framework 1.1 SP1

    NB: KB923100 makes reference to this page: http://blogs.msdn.com/astebner/archive/2006/05/30/611355.aspx.  Please read ALL as well as the related http://blogs.msdn.com/astebner/pages/8904493.aspx before using the .NET Framework cleanup tool.

    Step #3 => Check-in at Windows Update and install the critical updates of security offered.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

Maybe you are looking for