Windows update failures after using recovery disks (error A 8024, 000)

Similar Questions

• Satellite M30-107 does not start successfully after using recovery disk

  Hello

  I recently got my hands on a toshiba Satellite M30-107 laptop second hand and decided to freshen it.
  I used the toshiba recovery disk, but after that the laptop is no longer support windows.

  When turned on it shows booting Toshiba disc for about a second then goes to a screen blank and freezes.
  When turned on, once again, a screen will appear an error by stopping and offer the opportunity to start in SafeMode etc but choose one of the options causes the machine to freeze.

  Any help or advice would be much appreciated.

  Thank you
  JT

  Hello

  Sounds a little like the laptop does not start because of the problem of Windows software
  You did not recover the M30 with the original Toshiba that was provided with this device M30 recovery CD?

  I may be wrong, but to me it looks like a recovery CD incorrect has been used and an image with drivers not compatible m has been installed

  You can try to install the OS of Microsoft Win XP original CD and could check if it would be possible to get the notebook ruin using own BONE.

  In this case we (you and me ;)) might know if this problem could be related to hardware or software.

  Good bye

• Windows xp update fails after reinstall OE discs error number: 0x8024400A

  Windows xp update fails after reinstall OE discs error number: 0x8024400A. Cannont even run Windows update at all.

  Hello
   
  To work on the issue, consult these links.
   

  Temporary connection related errors may occur when you use Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/836941
   
  Note: make sure that you enable the antivirus software, other security and firewall after the test programs.
   
  Caution:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  You can also designate a similar thread that addresses the question:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/how-can-i-get-Windows-Update-error-x8024400a/35ba7694-c9b2-4043-a4c0-777d4b7736dc

  Hope the information is useful.

• Using recovery disks (windows 8.1) to re-install on a replacement hard drive

  Hello, I just ordered a DELL Inspiron 3000 desktop computer. I read that DELL power supply is no longer reinstallation DVD.  What happens when (if) the hard drive in the new PC goes wrong? Could I then form a new hard drive in my machine and use recovery disks (which I'd as soon as the PC happens with DELL to the top and recovery) to reinstall everything on this new hard drive? That's how would this work?

  Thank you

  Dominocat

  It's a ridiculous bunch of B.S. should not have to ask a recovery media for a system they bought which comes with the ability to make its own recovery media. I used the USB Flash method and the DVD I did when I bought the PC, and none of them works. Never do an option to install Windows. Refresh PC and PC Reset are just as useless when told your recovery media is not "valid". If I had my Windows product key that I have just to run Windows Setup, enter the key and be on my way.

  I tried to use the application form to request the media with Dell, but because I am out of warranty web page just a loop and does not always actually apply. It seems that I might have to call Dell technical support and pay by the minute (cell phone), while it is pending. Even the Support email link disappears once the warranty expires. Thank you, Dell. Appreciate the help.

  I think part of the problem is that the PC came with Windows 8 (so then the recovery DVDs were made) and since then I've upgraded to 8.1 making it "invalid". But this does not explain the new recovery USB support flash a few moments I did there are that still does not work for 'Refresh' or 'Reset' to my PC. It indicates that lack of recovery files. Should not have checked everything while bringing the recovery media?

  At this point, I have now downloaded the free version of Reflect and use to clone the old hard drive before he finally died, and I hope it will work. Good luck to all.

• I CAN'T INSTALL WINDOWS UPDATE (IMPORTANT) KB2761494 AND GET 80073AA2 ERROR CODE

  • I CAN'T INSTALL WINDOWS UPDATE (IMPORTANT) KB2761494 AND GET 80073AA2 ERROR CODE.   THIS HAPPENED SEVERAL WEEKS
  • THANK YOU, MARK SZYMANSKI
    

  Hi Mark,

  Thanks for posting your question in the Microsoft Community.

  I understand that you can not install Windows update to KB2761494 with error code 80073AA2. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. is the specific question for the individual or all of the updates?

  2. did you of recent changes made to your computer before the show?

  Please follow the methods and mark the question below:

  Method 1:

   

  You need perform a clean boot to prevent any third party conflicting application from interfering with your computer and try to install the updates.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

   

  Method 2:

   

  Manually install the update from the link below.

   

  Framework for drivers Windows version 1.11 cumulative update for Windows Vista and Windows Server 2008:

  http://support.Microsoft.com/kb/2761494

   

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

   

   

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

   

   

  Your response is very important for us to ensure a proper resolution. Please get back to us to help you accordingly.

• How long should windows updates take after 5 months of Vista?

  I have Windows Vista on a Toshiba laptop. A few days ago, I noticed that the last successful update was on 11/06/12. Then I ran windows update manually, but was getting an error that says "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer. "So I restarted my computer and went and it was OK, the service was not working. So I started manually. This allowed me to get updates. I clicked on install, and it said installation of updates. Its been almost 3 hours. In the Task Manager it shows the window updates running and in services, it shows the service running windows update. I'm just curious to know how long to him given has not updated for 5 months? Assistance or direction would be useful and appreciated. Thank you.  Herb

  Hello

  Thank you for contacting Microsoft Community.

  It's really weird that Windows has not been updated for 5 months. The time depends on the updates required for Windows, drivers as well as other Microsoft software, apart from the speed of internet connection. This is why the time cannot be guessed.

  Kindly updated Windows from time to time for peaceful work of the PC.

• Several windows updates are not installed and the error code given is 66A

  Original title: updates

  Several windows updates are not installed and the error code given is 66. However the error is considered to be unknown and the code is not useful to find a solution. Anyone know what the code means, or we mean?

  Hello

  1 did you change on your computer before this problem?

  Follow the suggestions and check if it works.

  Method 1

  You can reset Windows Update components and see if it works fine.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Method 2

  You can download and run the system update readiness tool.

  Description of the update tool of the system to Windows Vista, Windows Server 2008, Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821

  See also:

  Error code '0x8007066A' or "66" when you use the Windows Update Web site or Microsoft Update to install the .net Framework update

  http://support.Microsoft.com/kb/2507641/en-us

• loss of Windows Media Center after a recovery of systems (Vista 32 bit)

  loss of Windows Media Center after a recovery of systems (Vista 32 bit) this happened after a recovery of systems has fallen without a current backup.

  Hello

  you don't say what you used to perform a recovery of vista

  Family Vista premium and vista ultimate both come with Windows Media Center

  other versions of vista does not come with Windows Media center

• Windows Update is the cause of disk space in drive c

  Windows Update is the cause of disk space in drive c

  Hello, Josée Talukdar,.

  Thank you for your message.  Please see delete files using disk cleanup for the means to recover space on your hard drive.  Let us know if it did or did not help to solve your problem.  We can't wait to hear back on your part.

  See you soon

• Windows 2000 update stops at "checking if your computer has the latest version of Windows Update software for use with the site... »

  When I try to update Windows 2000 by using Windows Update, web site crashes the message

  'Check if your computer has the latest version of Windows Update software for use with this web site... The Web site uses ActiveX controls to determine which version of the software your computer is running. "If you see an ActiveX warning, make sure that the control is digitally signed by Microsoft before installing it or allowing him to run.

  Y at - it a fix for this problem?

  This problem may occur in Windows 2000, Windows 2000 SP1 and Windows 2000 SP2 on computers. These versions are no longer compatible with the Windows Update Web site. To resolve this problem, you need to install the latest Service Pack for Windows 2000 computers. Follow the link below to access the article and get with the latest Service Pack.

  http://support.Microsoft.com/kb/260910

  Bobby

• I'm having a problem reinstalling Windows XP. After formatting the disk and create partitions, it will not complete the installation.

  Problem reinstalling Windows XP

  I'm having a problem reinstalling Windows XP.  After formatting the disk and create partitions, it will not complete the installation.  He goes back and reinstall Windows again.  I go through the installation of 39 minutes, the computer restarts to complete and it loops back and start the installation again. Why it does this and what I can do to move beyond this?

  Go into the BIOS and make sure that you your hard drive is not set to off, and that is the first priority boot CD and your second HD.

  Don't push when it restarts anything just to let him do what he does and report back if anything I'm sorry I have no idea.

• Windows Update problem. "Windows didn't start the Windows Update service on Local computer." Error 1067: the process ended unexpectedly. »

  I have a problem with windows update. When I try to start the windows update service, I get this, "Windows could not start the Windows Update service on Local computer. Error 1067: The process ended unexpectedly. I also see this in the event viewer.

  Log name: Application

  Source: Application error

  Date: 21/07/2012 10:40:20

  Event ID: 1005

  Task category: (100)

  Level: error

  Keywords: Classic

  Description:

  Windows cannot access the C:\Windows\System32\wuaueng.dll file for one of the following reasons: there is a problem with the network connection, the file is stored on the disc or the storage drivers installed on this computer. or the drive is missing.  Windows has closed the program host process for Windows Services because of this error.

  Program: For the Windows service host process

  File: C:\Windows\System32\wuaueng.dll

  Tried regsvr32 c:\windows\system32\wuaueng.dll and got "the"C:\windows\system32\wuaueng.dll"module has been loaded but the call to DllRegisterServer failed with error code 0x80004005.

   

  SOLVED!

  Hello

  Follow these methods.

  Method 1: Try to re - register the file c:\windows\system32\wuaueng.dll

  To save the c:\windows\system32\wuaueng.dll file, follow these steps:

  a. click Start, type run.

  b. now, tin the window run, type regsvr32 c:\windows\system32\wuaueng.dll and then click OK.

  c. When you receive the following message appears, click OK:

  DllRegisterServer in successful c:\windows\system32\wuaueng.dll.

   

   Method 2: If this does not help, you can reset Windows update components and check.
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

• the recovery came with my compaq presario cq60 dx211 disks would work with windows vista home premium. the recovery disk, I was created when I had windows vista home basic.

  Windows Vista Home Basic to home premium compatibility

  the recovery came with my compaq presario cq60 dx211 disks would work with windows vista home premium. the recovery disk, I was created when I had windows vista home basic.

  How is - happen you to Vista Home Premium.  No, they will reinstall Home Basic.

• Recovery without disks manually off during Windows Update (well after the finished download) - Vista Home Premium SP2

  Hello

  I have an Acer with Vista SP2. It has no boot and auto repair after that I stupidly shut the computer manually during a Windows Update.

  I fell asleep and woke up two hours after the start of the update of Windows. Then without thinking, I did a manual stop without recognizing the update restart message. Now Windows does not start, and the auto repair / recovery options have failed three times. Initially he gave me a (?) CMOS settings have changed the error so I went into Setup (with the delete key) and note the date / time has been reset to the date of manufacture of the computer, do not change that. I have however system virus detection function then it off after that repair failed the first time.

  I bought a second hand computer and I have no original discs and I can't find a manually created recovery disc I thought I made some time ago. The label of Windows with Windows Vista Home Premium product key is on the computer. I have access to a Windows 7 CD since another cmputer if this can help me.

  I sent thisquestion from another computer.

  Your help would be much appreciated.

  Hello

  an AV does not stop all

  Data recovery

  1. remove the hard drive and it slave in another computer

  2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive like this

  3. try Knoppix

  http://www.Knopper.NET/Knoppix/index-en.html

  BUT this method 3 depends on your hardware in the computer that failed

• A startup problem after that Windows updates were installed and a disk read error occurred.

  I have a laptop Dell Inspiron 9400

  Windows Vista Home Premium SP2 operating systems

  Last night, he showed 16 updates are ready to be installed the automatic updates.

  So I clicked to install the updates as I always do.  I have everything done exactly the same thing.  When updates

  have been made install prompted me to restart now for the updates to take effect.  I have clickedd the button

  Restart now and he acted like he was going to reboot except is went to a blue screen with a message that says:

  A disk read error has occurred.

  Press Ctrl + Alt + Delete to restart

  I tried several times by pushing the Ctrl + alt + del keys to restart my system, it does not start...

  It shows the DELL screen with the loading bar, which is in charge of the left to the right.  It then displays

  Back to the blue screen with the same Message (an office read error)...

  I tried once or twice as the system restart in Mode safe mode (F8)...   This doesn't work anymore...

  He always flashes back to the BLUE SCREEN with the same message.

  Please, can someone tell me why this would happen as a result of the windows updates...?

  How this can be fixed or what should I do to get my back operational system?

  Thank you...

  Shelly928

  Hi Shelly928,

  You can read the following article and try the steps to solve the problem:

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  Hope this information is useful.