Windows Update keeps providing the same 6 updates again and again.

This is the third time that I am a request for assistance with this problem.

I have Vista Home Premium, 32-bit sp1.  HP Pavilion PC, about 2 years.  Norton Internet Security, Malwarebytes and Defender on.

Since September 8, I was offered various updates.  I can't install the 6 following updates:
KB967723
KB970710
KB968816
KB905866
KB971961
KB973768

I have install, update says that they have been installed successfully. they next day, they are offered again and if I go to view installed updates that are not there, although that still listed as installed with success in the history of the update.  Note: I do NOT receive the error messages.

The first response to my original message does not understand my problem because he told me to uninstall the updates I had already said were not there.  I followed his other recommendations anyway (try to install the updates in the clean boot state) and it made no difference.

The second speaker suggested reset components Windows Update (who has not made a difference) and using the system update tool (which apparently, the site said I didn't need).

Any other ideas?  I'm trying to update my system and do not feel I can do so until that these issues would be resolved.

Thank you

Advertisement

Hello

Try this 1st to see if it helps, and it should:

Description of the Patch registration cleanup tool
http://support.Microsoft.com/kb/976220/

------------------------------------------------------

If necessary :

Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
or the update itself - double click a view more information (or click top then discovers on the right)

Those who will take you to a page where you can download the update.

Or go here and the KBxxxxxx number to download it.

Download Center - mount the KBxxxxxx.

Microsoft Download Center
http://www.Microsoft.com/downloads/en/default.aspx

Download - SAVE - go to where you put them - click on - RUN AS ADMIN

Then you can right click on the update in the updates Windows and HIDE.

If you get an error Installer install this version:

Windows install 4.5 Redistributable
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

----------------------------------------------------

Then run this:

How to reset the Windows Update components? -a Mr Fixit
http://support.Microsoft.com/kb/971058

Description of the system for Windows Vista, Windows Server 2008, update tool and
for Windows 7
http://support.Microsoft.com/kb/947821

------------------------------------------------------------
Because these are all Office updates you might get more information if necessary in the Agency of those groups that
may have experienced the same problem.

Office newsgroups
http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

Microsoft.public.office.misc discussions
http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

------------------------------------------------------------

If necessary you can incident free get reports however the above should take care of it for you.

Windows updates - free Incident report

Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3

The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspx

I hope this helps.
Rob - bicycle - Mark Twain said it is good.

Tags: Windows

Similar Questions

  • When using my computer, all applications and the windows are closed at the same time, got disconnected and the computer turns off as if someone stops manually.

    Original title: it's a virus that's causing this?

    It happened a few times now. While I use my computer, all applications and the windows are closed at the same time, I am disconnected and the computer is off, as if someone manually stops the computer. I turn on the computer and log in and everything seems to be okay. No data deleted, not that I could find and detect anyway. One day when I turned on the computer, it run chkdsk before doing the usual startup. I use the computer for 2 years and this is the first time, she never did a chkdsk on its own. I used Microsoft Essentials and no viruses were found.

    Should I worry?

    Hello

    You can read the following article and try to download the Microsoft Safety Scanner and perform a full scan on your computer and check.

    Microsoft safety scanner

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    Check if there are logs of events related to the issue in the event viewer which may help us to solve the problem of the:

    What are the information contained in the logs of the event (Event Viewer)?

  • Illustrator CC5 creative cloud app has worked until recently. Now, it keeps giving the same pop-up over and over again: "validation of software license" how to solve this!

    I purcased adobe illustrator cc5 on February 8 this year and the striker paid for a year. The program worked fine until last week. I tried to reinstall the program, but that did not work. When I start the program it keeps giving the same pop-up "validation of software license" How can I solve this problem.

    uninstall all cc

    clean through the use of the Adobe Creative Cloud cleaning tool to solve installation problems

    Rename the following folders (which will affect your adobe software licenses):

    C:\ProgramData\Adobe\SLstore

    C:\Program Files (x 86) \Common Files\Adobe\Adobe PCD

    C:\Program Files (x 86) \Common Files\Adobe\caps

    Restart your computer

    Reinstall the cc app, download Adobe Creative Cloud apps | Adobe Creative Cloud free trial

    the application allows to install your programs of cc.

  • I TRY to INSTALL MY CEATIVE SUITE 2 FOR MAC PRO WITH OSX.9, I don't really know why I keep answering the same questiion

    I TRY to INSTALL MY CEATIVE SUITE 2 FOR MAC PRO WITH OSX.9, I don't really know why I keep answering the same questiion

    CS2 and MacOSX10.9 are not compatible. CS2 works on the old Mac with a PowerPC processor. Current Mac have an Intel processor and CS2 does not work.

  • LR and PS will not update 'Download error' 49 customer service contact? anyone had this problem and how to solve? was running windows 8.1 and now running windows 10 but had the same problem with two BONES

    LR and PS will not update 'Download error' 49 customer service contact? anyone had this problem and how to solve? was running windows 8.1 and now running windows 10 but had the same problem with two BONES

    Check your hosts file.  to help with this and more:

    Log, activation, or connection errors. CS5.5 and later, Acrobat DC

  • Cannot access the Windows Update site and install updates

    Original title: 2 problems 1 when he goes to win the update, I get, can not display the page. 2 if I'm going in a different direction and I get search updates, scanning (encountered a problem can not display the page) comes up and on the opportunity of the page crashes.

    I did fix it, I disabled all firewall internet security and and also listed win update to a trusted site.

    Hi trski,

    I recommend you to check for possible malware program.

    1 restart the computer using safe mode with networking. If you have a Type of Internet connection wireless, have a wired internet connection. To restart in Mode safe mode with networking:
    a. press the restart.
    (b) at the moment you press the restart button, keep tapping F8 until that Advanced Boot Options appears.
    c. Select Mode safe mode with networking
    2. open the Web browser to explore and go to http://safety.live.com.
    3 scan the OneCare Safety Scanner full Service.
    4. take note of the items that are detected, but cannot be deleted, as appropriate. Get back to me with the names of the infections that cannot be removed, if necessary.
    5. after removing the infection (if any), start in Normal Mode by restarting just the normal computer like you do it.

    Run Windows Update again, and get back to us with your findings.

    If this post can help solve your problem, please click "Propose as answer" If you find it useful, mark it as useful by clicking the 'Vote as useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Windows update downloaded and installed sp1 and sp2. Both show as successful in the history of the update but does not show in 'the computer properties.

    Windows update downloaded and installed sp1 and sp2. Both show as "successful" in the history of the update however my computer properties tab represents OS is Windows Vista Home Premium and shows no indication of SP1 or SP2. Is there a process of 'activation' these? Should not be done automatically? Any help is appreciated!

    Hello

    Thanks for posting the request in the Microsoft Community.

    Method 1:

    I would say as you to see the link to use the System File Checker tool (sfc) to troubleshoot missing or corrupted system files in Windows:

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    Method 2:

    Step 1:

    I suggest to refer to the article and try to run the system update tool:

    System update scan tool corrects errors of Windows Update in Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

    Step 2:

    You can check the link and try to obtain the latest Service Pack for Windows Vista:

    How to obtain the latest Windows Vista service pack

    http://support.Microsoft.com/kb/935791

    Let us know if it helps.

  • Windows 7 CBS huge log files, very heavy use of the disk during Windows Update passages and plenty of RAM used by svchost

    Since I installed and then uninstalled windows 7 display language pack (it is thus more no record of it in the locale), namely for the Chinese, I get my CBS.logs (reaching several hundred MB to each race) filled with lines like these:

    "2015-07-18 22:07:35, CBS Appl info: detecting, Package Parent: Package_for_KB3045999 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.1.1.1, Parent: Microsoft-Windows-WinPE-LanguagePack-Package~31bf3856ad364e35~amd64~ar-SA~6.1.7601.17514, layout = Detect, VersionComp: EQ, ServiceComp: EQ, BuildComp: EQ, DistributionComp: GE, RevisionComp: GE, Exist: present.
    2015-07-18 22:07:35, CBS Appl info: detectParent: package: Package_for_KB3045999 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.1.1.1, no found parent, go away
    2015-07-18 22:07:35, CBS Appl info: detecting, Package Parent: Package_for_KB3045999 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.1.1.1, Parent: Microsoft-Windows-WinPE-LanguagePack-Package~31bf3856ad364e35~amd64~en-US~6.1.7601.17514, layout = Detect, VersionComp: EQ, ServiceComp: EQ, BuildComp: EQ, DistributionComp: GE, RevisionComp: GE, Exist: present
    2015-07-18 22:07:35, CBS Appl info: detectParent: package: Package_for_KB3045999 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.1.1.1, no found parent, go away
    "2015-07-18 22:07:35, CBS Appl info: detecting, Package Parent: Package_for_KB3045999 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.1.1.1, Parent: Microsoft-Windows-WinPE-LanguagePack-Package~31bf3856ad364e35~amd64~hu-HU~6.1.7601.17514, layout = Detect, VersionComp: EQ, ServiceComp: EQ, BuildComp: EQ, DistributionComp: GE, RevisionComp: GE, Exist: present.

    and these:

    «2015-07-18 22:07:35, CBS Applicability (ComponentAnalyzerEvaluateSelfUpdate) info: component: amd64_microsoft-windows-b...» OS - loader.resources_31bf3856ad364e35_6.1.7601.23002_cs - cz_91faa7482cc099d9, raise: 2, applicable(true/false): 0
    2015-07-18 22:07:35, CBS Appl info: Selfupdate, component: amd64_microsoft-windows-b... OS - loader.resources_31bf3856ad364e35_0.0.0.0_da - dk_5074e001f3d72380 (6.1.7601.23002), altitude: 2 lower support of revision version: 0.0.0.0
    2015-07-18 22:07:35, CBS Applicability (ComponentAnalyzerEvaluateSelfUpdate) info: component: amd64_microsoft-windows-b... OS - loader.resources_31bf3856ad364e35_6.1.7601.23002_da - dk_2f34876f230695d8, raise: 2, applicable(true/false): 0 ''

    Now, it seems that windows is searching for updates on all the available languages and that really cripples my PC whenever Windows Update for new updates, what can I do to stop this?

    Thank you

    After the installation and the removal of the update of Chinese language (even though he was again through regional settings because I could not see it in the installed applications or updates, and if I used the windows update install) and after the windows update service modules and removing all CBS connects the problem seems to have disappeared.

    Thank you all for your help.

  • my windows vista computer when its loading windows turns black and stops working then starts again and the same thing happens again.

    When I turn on my pc, the system starts the Pentecost a poblem but when windows Vista family premium starts to go the window that allows you to put the password it goes black after a wile it restarts and the same thing happens again.
    safe mode works I have Dome system restore format and reinstall windows and happens again :(

    Hi LGStrike,

    Restore your computer to a point before the updates being installed with the System Restore.  Then proceed as follows:

    1. go in Control Panel , and then select Windows Update.

    2. click on check for updates.

    3. once the results come back, click on the link that shows Important updates and deselect all the updates except the first 3 or almost and install the updates.

    4. Repeat steps 1 through 3 until you receive the error message.

    Dena
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows Update failure and & SFC /scannnow results

    Hello, Win7 64 bit home edition Premium user.

    I restarted my PC with an old XP OEM from my previous PC drive and he started to move - I stopped it at first, but he replaced my startup file, I had to be replaced by reinstalling my backup/dual boot OS, Linux Mint.  After spending a whole day trying to solve my startup files (Windows Repair on the Windows 7 disk did not work, System Restore was not available), I went into Windows by copying the necessary files from the drive via the command prompt.  At least, I think it's finally finished work - it was quite a long ordeal.
    Fast forward to today: after being able to go back to Windows (if I have still two entrances Win7 on my Start menu that seem to do the same thing), I noticed that some of my mouse functions have disappeared (zoom button does more work), and my windows updates will install is no longer.  I tried to replace the mouse driver software, but after uninstalling it with "Program install and uninstall" Fix - It, I could not reinstall it because I got an error message saying that a newer version of the software has already been installed.  I raise this issue because I believe that it is a problem with Windows Update no longer works.  I even took the trouble to uninstall however much 100 + updates I had allowed the years to start from the beginning, and now I'm stuck with more than 100 updates failed instead of a dozen or two.
    It getting to download 0% for a very long time sometimes hours, before finally download and try to install the updates many and always default.  I tried the troubleshooting Windows Update tool, and it did not help.  I tried to solve any problems by using the file system (SFC/scannow at the command prompt) checker, but no luck - I received an error message stating that there were records that he was unable to repair.  I created a sfcdetails.txt (findstr/c: "[SR]" %windir%\Logs\CBS\CBS.log > '% userprofile%\Desktop\sfcdetails.txt'), but there is no listed in that document, *.dll files so that I could replace them.
    TL; DR - Windows Update does not work and problems with the mouse drivers, I guess. What files should I replace and how
    ?
    Sfcdetails.txt content looks like this:
    2013-07-19 10:17:09, info CSI 00000009 [SR] components check 100 (0 x 0000000000000064)
    2013-07-19 10:17:09, CSI information 0000000 transaction [SR] beginning verify and repair
    2013-07-19 10:17:12, information 0000000 c [SR] audit CSI complete
    2013-07-19 10:17:12, CSI to 0000000 d [SR] 100 audit information (0 x 0000000000000064) components
    2013-07-19 10:17:12, Info CSI 0000000e transaction [SR] beginning verify and repair
    2013-07-19 10:17:14, info CSI 00000010 [SR] verification complete
    (Often, with the exception of a few eccentric where the number isn't 100 :))
    2013-07-19 10:25:50, CSI Info 000002 c 9 [SR] components check 88 (0 x 0000000000000058)
    2013-07-19 10:25:50, CSI Info 000002ca transaction [SR] beginning verify and repair
    2013-07-19 10:25:53, 000002cc CSI Info [SR] verification complete
    2013-07-19 10:25:53, CSI Info 000002 cd [SR] repair 0 components
    2013-07-19 10:25:53, CSI Info 000002ce transaction [SR] beginning verify and repair
    2013-07-19 10:25:53, CSI Info 000002 d 0 [SR] full repair
    2013-07-19 14:02:35, CSI Info 000002 c 9 [SR] components check 88 (0 x 0000000000000058)
    2013-07-19 14:02:35, CSI Info 000002ca transaction [SR] beginning verify and repair
    2013-07-19 14:02:41, 000002cc CSI Info [SR] verification complete
    2013-07-19 14:02:41, CSI Info 000002 cd [SR] repair 0 components
    2013-07-19 14:02:41, 000002ce CSI Info transaction [SR] beginning verify and repair
    2013-07-19 14:02:41, CSI Info 000002 d 0 [SR] full repair

    Thank you
    TS

    Hello

    I suggest you to follow the steps in troubleshooting this article and check if it helps:

    Windows Update crashes when installing updates in Windows 8, Windows 7, or Windows Vista

    http://support.Microsoft.com/kb/2700567/en-us

    Note If the computer had Windows pre-installed, see the manufacturer's documentation for how to do an upgrade on the spot.

    Note We recommend that you back up all personal files. For more information about how to back up your files, go to the following Microsoft Web site:

    I hope this helps.

  • Cannot install Windows Update KB2728973 and KB2917500

    Hello!

    The Windows Update KB2728973 and KB2917500 are appearing repeatedly on Help and Support Center, windows update and the automatic update check on purpose to get updates of high priority (recommended) button.

    The update of windows KB2728973 will automatically appear on the notification area.  I installed the KB2728973 update.  When I check the latest version of windows update in Help and Support Center, the KB2917500 appears in patches of high priority (recommended).  I also installed the KB2917500 update.  Once again, the update of windows KB2728973 will be automatically appears on the notification area and install it again.  And even once, when you check that the latest version of windows update in Help and Support Center, the KB2917500 appears again in the updates of high priority (recommended).

    As a closure update, only once you update, it appears again.

    Looking forward to our experts advise on this issue.  Guys thank you very much in advance.

    You only need KB2917500 since it replaces the KB2728973. Try to install manually by downloading it from http://www.microsoft.com/downloads/details.aspx?FamilyId=11534eba-01c5-42ad-8254-3123fe204661.

  • Vista - windows update broken (and then some)

    Hi everyone, maybe you could help me with this...

    My system is a laptop running vista home basic service pack 2.
    The laptop is also on a wireless network without proxy.
    all moving parts are functional, I would say... (ram hd etc..)

    It seems that this update of windows is quite unable. Common symptoms are
    -When you try to search updates notice occurs that the service is stopped.
    -A separate statement occurs informing that a host process has stopped working.

    The most recent update I see is 11/09.

    A quick glance around my services leads me to believe that BITS is the problem, because I can't seem to start the service without stopping quickly. It also reproduces the host process error notice.
    Event Viewer shows a consistent error listed as follows...

    Failing application svchost.exe_BITS, version 6.0.6001.18000, time stamp 0x47918b89, failed module qmgr.dll, version 7.0.6002.18005, time stamp 0x49e037de, exception 0xc000001d, offset 0x000587e7, process 0x2d8 id error code, start the application time 0x01ca8c8b35264f9f.

    The error also occurs with windows defender.

    I tried the fix for BITS of http://support.microsoft.com/default.aspx/kb/940520 including the manual fix suggests the page.
    I also tried several methods which included manually stopping and restarting the windows update service and other services that I considered relevant.
    System restore failed me on all accounts, Startup Repair can not find anything.
    This error is also reproduced in safemode, but also a clean boot.

    An interesting thing that I met just used the fixit found here
    http://support.Microsoft.com/kb/971058
    I ran it automatically with the aggressive function checked.
    After the reboot, I found that windows update worked but then the two BITS and windows update services stopped.
    There is also a message in the editing window:

    Code 800706BA (unknown error)

    I did a considerable amount of research on the internet, including the knowledge base and I can't seem to find a solution for this. So I turn here. After watching a few discussions, it seems that people here are knowledgeable and helpful.
    In all sincerity at all any help is GREATLY appreciated.
    Thank you for your time.

    Hello

    Try these to erase corruption and missing/damaged file system repair or replacement.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    The foregoing is necessary preparatory work.

    ------------------------------------------------------------------
    Error 800706ba Windows Update<- check="" this="">
    http://www.instantvista.com/800706ba.html

    If the updates you don't need or want the control panel - Windows Updates - click right on and HIDE.

    Try this 1st to see if it helps, and it should:

    Description of the Patch registration cleanup tool
    http://support.Microsoft.com/kb/976220/

    To download manually:

    Download Center - mount the KBxxxxxx.

    Microsoft Download Center
    http://www.Microsoft.com/downloads/en/default.aspx

    Download - SAVE - go to where you put them - click on - RUN AS ADMIN

    Then you can right click on the update in the updates Windows and HIDE.

    If you get an error Installer install this version:

    Windows install 4.5 Redistributable
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

    Then run this:

    How to reset the Windows Update components? -a Mr Fixit
    http://support.Microsoft.com/kb/971058

    Description of the system for Windows Vista, Windows Server 2008, update tool and
    for Windows 7
    http://support.Microsoft.com/kb/947821

    ------------------------------------------------------------

    If necessary, you can get free reports of incidents.

    Windows updates - free Incident report

    Go here and click on-> Windows Update fails while searching, downloading or installation of updates
    http://support.Microsoft.com/GP/wusupport#tab3

    The security updates, you can get free support Incident report
    http://www.Microsoft.com/protect/resources/support.aspx

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • license for XP pro to windows 7 pro on the same authorized computer?

    Hi support them.

    I need to know if I can upgrade my computer XP pro OEM for windows 7 pro (on the same machine) without having to buy a new license of win7?

    On Fri, September 26, 2014 08:16:55 + 0000, alex ho kuanalex sai ho sai kuan
    wrote:

    I need to know if I can upgrade my computer XP pro OEM for windows 7 pro (on the same machine) without having to buy a new license of win7?

    No, you can't. Why do you do this? It is not an upgrade; the
    two are the same; only licensing rules are different.

  • Generally when I go in windows or by mail, the computer will pick up, and then when it opens, I can't keep the page at a particular place

    Original title: blocking or scrolling

    Generally when I go in windows or by mail, the computer will pick up, and then when it opens, I can't keep the page at a particular place. It scrolls upwards or downwards, when I try to open a place to file an open letter from mail, or trying to do some work. Please notify.

    Hello

    1 how long have you been faced with this problem?
    2 don't you make changes on the computer before this problem?
    3 what e-mail client or browser you use?

    Step 1: Check if the problem persists in the clean boot state.

    From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

    Reference:
    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
    1. click on start and then click Run.
    2. type msconfig and click OK.

    The System Configuration Utility dialog box appears.

    3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
    4. When prompted, click on restart to restart the computer.

    Step 2: Also, viruses or malware scan and check.
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
    http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=ad724ae0-e72d-4f54-9ab3-75b8eb148356

    Step 3: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

    Reference:
    Using the event viewer
    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true
    Understanding of event viewer
    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true
    Procedure to view and manage event logs in Event Viewer in Windows XP
    http://support.Microsoft.com/kb/308427

  • Mac with bootcamp to format and reinstall windows, can I use the same cd key and product?

    I want to reformat my mac...

    I want to reformat my mac with bootcamp and I want to reinstall windows. can I use the same cd key and product? or do I have to do something with the current activation? Windows will recognize that it is the same computer after I repartition it?

    I want to reformat my mac with bootcamp and I want to reinstall windows. can I use the same cd key and product? or do I have to do something with the current activation? Windows will recognize that it is the same computer after I repartition it?

    If it worked the first time, there is no reason that it will not work the second time on the same computer, as long as the Windows 7 is a full version.

    If this is an upgrade version, you must have the qualifying OS installed and enabled before you upgrade and it will work.

Maybe you are looking for

  • Wireless keyboard not working anymore... wireless mouse still works.

    My keyboard just stopped working for me while I was typing... put batteries in... reset... pulled the usb dongle... He... moving mouse and keyboard use the same dongle... mouse continued to work... any ideas? Thank you.

  • Auto check all applications during import

    During a long import iTunes comes up with several issues that need to be automated. Examples (1) wma files are not imported. Instead, iTunes asks you if it should turn them in to m4u. So, after 3 hours of the import, the import stops at halfway, and

  • I have a missing file, msi... What is and how to restore it?

    I have a missing file, msi... What is and how to restore it?   It does not allow me to update itunes.

  • "System Restore checkbox is disabled (through Group Policy)"

    Where can I ask a question ' how can I turn on system restore which is disabled by group policy? I turn off System Restore by using these steps. Right click on my computer-> properties-> system-> clicked restore on turn off System Restore check box.

  • Create a border using nine image slices

    Hello! I am trying to create a border using nine slices image. selectedControlBorder.png is 12 x 12 px png where means 4 pixels are transparent: selectedControlBorder.amd: #RimCascadesAssetMetaData version=1.0 source: "selectedControlBorder.png" slic