Windows Update locks upwards and will not run.

Similar Questions

• Windows Update deleted Norton and will not reinstall. How long can we operate in Mode safe? Ramifications of this?

  I spoke several times with Norton. System Restore was successful a couple of times, but Norton that was in place during this period is no longer present. I'm exploited only in safe mode and do not know how this works, either; It's very limiting.  COMPUTER geeks have determined that no virus or hard drive interest. The computer is unbelievably slow without safe mode, as so well to exploit.  It started mid-October with a Windows Update.  Norton has been reinstalled and worked for several weeks until another Windows update.  I uninstalled and reinstalled Norton until I'm blue in the face and it's still wobbly.  Any help and suggestions would be so appreciated.  Thank you ~.

  Hi TaraYA,

  ·         What happens when you try to install Norton?

  ·         You receive an error message?

  ·         Did you do changes on the computer before the show?

  Windows Update does not remove any safety program. However, you can check the program installed on the computer or not?

  To search for a file or folder, see the following article:

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

   

  Add or remove a program overview

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/win_addprog_window_component.mspx?mfr=true

  I hope this helps.

• CFS3 hangs upwards and will not stop running.

  CFS3 worked fine with Vista, but began to hang. Upgraded to Win7 and it worked fine until I defragmented the drive and now it freezes and will not be cut. I even removed the CD and rebooted the system, and I can't restart the game because it tells another CFS3 is already running. I have left because of this problem with Vista. He works very well so far and I'm suddenly incompatible program issues. If the program is not compatible why it worked very well for months? Has anyone else had this problem? It is the only program that I have problems with. I have a feeling I'm going to throw all that _ Quad Core 2.4 Ghz Vista by the window for an old Pentium 3 IBM PC.

  After a recent system restore, I met an error referring cannot start software Logitech set point. When I went to remove and re-install this software, I found that it was not present because of the restoration of the system. Manually, I deleted all traces of setpoint and withdrew its wireless mouse. After that I had to rebuild the index file and I've had no problems since.

• I can download all windows updates, but my system will not configure and install them. I have Vista, what happens?

  nfkgjaLRjh:KF'e; ktg; B; love my lifeE

  Hello

  Do you get any error messages? More detail of what is happening and noted that allows us to help you.

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:
  
  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Updates Windows 7 in error and will not be installed

  Windows updates are not up-to-date.  saying: it is problems that won't be updated.

  * original title - install updates, that is to say the computer is ready for and he won't let it. Repeat me that there is an error.*

  Fix with difficulty WU Utility http://bit.ly/a49XCo Windows updates

  Reset Windows Update components:
  http://support.Microsoft.com/kb/971058
  http://support.Microsoft.com/kb/883825

  The problems with the installation of the updates:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• I'm running Windows 8 Preview release and will not install my HP Solution Center

  Officejet 5610 all-in-one printer

  Windows 8 Preview Release, evaluation copy. BUiD 8400
  Laptop Acer Aspire 7741Z

  HP Solution Center will not install.

  Error:
  Registry keys:
  Slbcsp.dll
  Sccbase.dll
  Gpkcsp.dll
  Enum

  missing in the registry.

  DesperateDan,

  You're the list correctly. Please remember that this document communicates that drivers are coming as windows 8 debut, not what is now available.

  Because windows 8 is still in a preview version, you will have a few problems with whatever you try to use the current drivers. Make sense?

• Most of Microsoft Windows Update Services, for example will not work after replacing my hard drive.

  * Original title: Unknown Publisher for most of the Microsoft Services such as the window update

  Recently, my Toshiba hard drive failed on my Satellite L500.  I replaced it with a new 500 GB hard drive.  And then used my Toshiba restore to out of the box, however, as stated in the subject, it shows most of the Microsoft Services do not work.  As suggested in another post, I ran MGADiag and here's what I copied.  What kind of help you can give is appreciated.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - 4F8HK - M4P73-W8DQG
  The Windows Product Key hash: Xs1iQgVeo0C + sObJxS7eu + FuBPQ =
  Windows product ID: 00359-OEM-8992687-00057
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7600.2.00010300.0.0.003
  ID: {EC921169-98BC-407F-99C4-04D38DBA4400} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7600.win7_rtm. 090713 1255
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: B4D0AA8B-604-645_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\windows\system32\wat\watadminsvc.exe[Hr = 0 x 80070003]
  [File mismatch: C:\windows\system32\wat\npwatweb.dll[Hr = 0 x 80070003]
  [File mismatch: C:\windows\system32\wat\watux.exe[Hr = 0 x 80070003]
  [File mismatch: C:\windows\system32\wat\watweb.dll[Hr = 0 x 80070003]
  [File mismatch: C:\windows\system32\sppobjs.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\windows\system32\sppc.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\windows\system32\sppwinob.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\windows\system32\slui.exe[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\windows\system32\sppcomapi.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\windows\system32\sppsvc.exe[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\windows\system32\systemcpl.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\windows\system32\user32.dll[6.1.7600.16385], Hr = 0x800b0100

  Other data-->
  Office details: {EC921169-98BC-407F-99C4-04D38DBA4400}1.9.0027.06.1.7600.2.00010300.0.0.003x 64*-*-*-*-W8DQG00359-OEM-8992687-000572S-1-5-21-3296362386-1532337117-3753913143TOSHIBASatellite L500TOSHIBA2.0020110121000000.000000 + 00090B83607018400FC10090409Time(GMT-05:00) Standard is03TOSCPLTOSCPL00109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7600.16385

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00178-926-800057-02-1033-7600.0000-3142009
  Installation ID: 021330453740668764980431685940600732000434410320980891
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: W8DQG
  License status: licensed
  Remaining Windows rearm count: 3
  Trust time: 31/05/2014-04:47:52

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: n/a
  Beyond: 0 x 0000000000000000
  Event time stamp: n/a
  ActiveX: Not registered - 0 x 80040154
  The admin service: not registered - 0 x 80040154
  Output beyond bitmask:

  After reading through all the same problems here, I found a post that mentions a WD drive disc that I put in after the failure of my Toshiba HD.   I followed the link that took me to a page of HP but I installed the Intel Rapid Storage Technology driver (IRRT) via the provided download link and hop, from this moment, things seem to be fixed.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02219204&CC=NL&LC=en&DLC=en&product

• Windows Update next time ICON will not go away.

  I was notified (install shield ICON next to the time) 3 updates of Windows XP were available for installation.  I clicked on the shield to install ICON and three updates were installed without problem.  A little later, I was informed that (what I thought) have been updated further to install.  I clicked on the shield to install it next to the time and updates - updates is proved be the same as those previously installed.  I then decided to go to start > all programs > Windows Update and see if updates have been recorded as being installed on my system - they were... in fact, they were recorded as being installed at three different times.

  My Question - how to, I do the install shield next time disappear?

  Frog

  I was notified (install shield ICON next to the time) 3 updates of Windows XP were available for installation.  I clicked on the shield to install ICON and three updates were installed without problem.  A little later, I was informed that (what I thought) have been updated further to install.  I clicked on the shield to install it next to the time and updates - updates is proved be the same as those previously installed.  I then decided to go to start > all programs > Windows Update and see if updates have been recorded as being installed on my system - they were... in fact, they were recorded as being installed at three different times.

  My Question - how to, I do the install shield next time disappear?

  Frog

  Don't ask me how or why, but the Microsoft shield icon to install update has disappeared from the taskbar in this morning.  I turned off the computer/on several times yesterday thinking that he could solve the problem - it did it not.  As always, I disabled the system before going to bed last night.  Unsurprisingly, I thought, the shield icon install was still there this morning when I turned it on.  The icon, however, disappeared on its own about 30 seconds after starting.  Why I'm not sure.  In any case, I think that this issue is resolved for now.

  Frog

• Drive hard USB is write protected and will not run backup

  After the upgrade from Vista to 7 I formatted a drive hard Maxtor Plus and backup is complete with image.  A week more later in a attempt to a backup I received a message that the backup failed, disk is write protected.  I tried to take possession through the prompt command > takeown /f e: and received message disk is write protected.  Formatted drive in another computer with XP, then windows 7 machiene always write protected. Attempted to seize properties.  current owner is a numerical value of the letters about 35.  Will not let me take ownership as administrator again tells me disk is write protected.  Is it possible to remove the write protection this drive E:

  Thank you for your response.  It was not a strategy of storage devices in my registry.  I tried to create it manually. I was able to get a folder, but the value is default.  Not believing that I could create the key correctly, that I resorted to restore my system before the first backup and I got access to the external drive at this time.  I will install a new backup and hope that I find not write-protected again.

• Windows update is corrupted and does not

  Hi, I get this problem for my windows update. Windows update client image is damaged and when I clicked on the "Windows Update" it shows nothing also includes "Check for updates", "Install optional updates", but when I clicked on the 'turn automatic updating on or off' and "View update history" he showed me the error message like the picture below. I tried solving the problems with windows update, but it doesn't work also.

  When I clicked on "View update history"

  

  When I clicked on ' Turn update or disable automatic.

  

  Customer update windows image is corrupt

  

  Have you tried a system restore?  Which usually fix this type of problem.

  Guide: http://windows.microsoft.com/en-US/windows-8/restore-refresh-reset-pc

• iPod classic is locked permanently and will not restart or reset.

  I had my iPod Classic (160GB) for about six years. I received as a Christmas gift in 2010. For the last two days, the "lock" symbol was flicker on and out, even when the switch is moved to the off position. I went to put it on today and it wouldn't respond. I plugged my headphones and the screen lit to show me the lock symbol was done again. I tried to reset the iPod, tried to restore and toggled the switch locking on and off tension several times but nothing does. I think I just need to take it into Apple and see if they can fix it or if I need to go and resign myself to the idea that I need to invest in a new iPod. Any ideas?

  Looks like you might need a new headphone jack and hold together switch. You could do it yourself or use a third party service center.

  TT2

• Why dose my window have a gap and will not drag down or up to the screen adjustment?

  my window has a gap, that departure is at the bottom, but there is a gap and I can't drag it to get it to connect. And when I try to get the mouse to go to the

  First, I have a very difficult time for the mouse it my mouse bounces up and down. And the dose of window left adjustment right upstairs downstairs.
  I'm going nuts help me please thanks Aja'

  Hello

  Were there any changes made to your computer before this problem?

  To change the display settings, you can try the following steps.

  Method 1:

  Graphics card:
  
  You can uninstall and reinstall the graphics card. To do
   
  1. click on start and then run.
   
  2 type devmgmt.msc, and then press ENTER.
   
  3. the Device Manager will open and you will see graphics card listed.
   
  4. right click on the graphics card and click on uninstall.
   
  5 restart the computer.

  Method 2:
   
  See the link below.

  How to change the appearance of items on the desktop in Windows XP
   
  http://support.Microsoft.com/kb/310543

  Method 3:

  You can also download and install the latest drivers for your site of manufacturers of computer or on the web site of display adapter manufacturers.

  Method 4:
   
  You can try to restore your computer to an earlier point in time when it was working fine. To do this, you can follow the article below:
   
  http://support.Microsoft.com/kb/306084
   
  Please read the article before proceeding with the restoration of the system.

  Hope this information is useful.

• Missing tools disk and will not run

  My Disk Defrag and disk clean tools are missing from the start > Accessories > system tools section.

  I found the application "Defrag" and "Defrag.exe.mui" file under computer > c: drive > Windows > System 32.  The Defrag.exe.mui is missing an icon (which I guess means something is wrong).

  When I double click on 'Defrag' application to run a defrag, a black window appears a second maximum, which is not long enough for me to read even a single word of what said the window.  After that, the window disappears and nothing happens.

  When I double click on "Defrag.exe.mui" file to run a defrag, a system window appears and asks me to choose a program/file to run with.  If I choose the defragmentation application, but exactly the same thing happens... a black window appears a second maximum, the window disappears and nothing happens.

  Any ideas to know why this is happening or what I can do to use or difficulty of the defrag app?

  I have a Latitude E65100 running on Windows Vista professional, Service Pack 2, 32-bit OS.  It has 4 GB of RAM and an Intel (r) Core (TM) 2 Duo CPU P8600 @ 2.40 GHz 2.40 GHz.  I don't know much about computers so I thought I'd give you all the info that I could find because I don't know what is and isn't relevant.

  Thanks in advance!  :)

  Defrag.exe.MUI is not an icon. the .mui files contain the language for a program information.

  The program that starts a defrag on the start menu is C:/Windows/System32/dfrgui.exe.

  Is it a computer company which could have some features are disabled?

  What happens if you type "defrag" in the box "search"?

  You can check the files Windows missing or damaged by using this method:

  http://support.Microsoft.com/kb/929833

  Here's the same thing with photos:

  http://www.Vistax64.com/tutorials/66978-system-files-SFC-command.html

  Ignore the ads and downloads on the site.

• Photoshop CS2 says my serial number is not valid and will not run.

  When you start photoshop CS2, I received a message that my name photoshop user, organization or serial number is missing or invalid.  I can't run photoshop.  I bought legally in 2005 (I know, I had this version for some time).  I used the program a few days ago.  How to solve this?

  You have an installation CD that can run the uninstaller for you?

  Removal of Windows process «»

  Insert the Adobe Photoshop CS2 CD in your computer's CD drive.

  1. start the removal process.

  As with installation, the first window that appears requires you to choose a language for the installer. After you select a language and click OK, the software license agreement appears. Read the software license agreement. If you agree, click on accept. If you click on decline, Setup will stop.

  Click on install Photoshop CS2 in the main installation screen, click on next to the Welcome screen.

  2 disassembly and repair.

  When Photoshop CS2 is already installed, you have the option to repair the current version, which solves any problem that may have the version installed, or you can remove the currently installed version. Click on delete and click Next. »

• AoE3 cannot create log files and will not run.

  AOE3 I installed on my machine. The game is stored on an external hard drive that is almost new and has yet to give me any problems. Whenever I try to launch the game, I get the following error "could not create the log file. Ensure that you have all rights in the directory where the Age of Empires III, and that you have available disk space. \n Erroe: access denied. »

  I am the only user of this computer, my account has full administrator access and there is more than a terabyte of disk space. I don't knopw not why there is no problem running this game - especially as all the other files on the road very well works.

  Any help would be greatly appreciated.

  Thank you.

  Delete the log file, "Age3Log.txt", which could give this error message from My Documents\My Games\Age of Empires 3 'folder.

  Try to delete this file as an administrator, and then click Connect.

  Girls. You never know what they think.