Windows Update reports of missing files. Repair fails in a loop.

Similar Questions

• \Windows\system32\config\system MISSING file of repair

  I have a T400 who HAD an XP Pro operating system... Google chrome has frozen the system and I did a hard reboot and the computer had lost the configuration of the registry file. Microsoft recommends that the oem disc should be used, instead of a commercial version of the operating system. It's my DISLIKE for the purchase of a laptop computer with the OEM software, without a backup disk. If there is a problem, the manufacturer generally is going to drag you dry. I thought that this stratagem of Toshiba, but not of Lenovo. Hell, you can't even ask 'em to a disk if you are out of warranty. Stone wall. Why is it not possible to ask even an OEM Lenovo restore disk? Unless you have the security privileges, there is no way to even ask a repair disc: repair file \windows\system32\config\system MISSING this thread has addressed the topic of config file missing and from the looks of it nothing of this worked when even though the guy has abandoned and performed a clean installation and lost three days : http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/How-to-repair-corrupt-windows-system32-c... This is not the problem of problems it's despair. I have a lot of files on that drive the need for recovery. I just want to get some tips on how to record what I have and do not go the trouble to reinstall my entire library of software and then having to reinvent my lost files. Ridiculous. Where there is an article on what works?

  
  

• Standalone update Windows Vista service pack 2 32-bit does not update because of missing files in service pack 1.

  Original title: lack of vista service pack 1 files

  updated standalone service pack 2 32-bit tells me he does not update my copy of vista 32 with service pack 1 installed. due to the missing files in service pack 1. Windows update says all updates, including service pack 1 are current and accurate.

  Hello

  What is the full error message that you receive?

  Method 1:

  You can see the KB article to reset the Windows Update components and check if you can install the stand-alone package of Vista Service Pack (SP) 2.

  How to reset the Windows Update components?

  Method 2:

  If the problem persists, then you can try the steps in the following article and check if this can help:

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  Method 3:

  You also, try to run a SFC scan to check all corrupted files.

  You can read the following article to launch the SFC scan:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

• Windows Update indicates that the files needed to use this service no longer exist on my computer. How to solve this problem?

  After having problems with my computer at startup, I finally decided to try to use my Windows XP CD to repair my file system; However, it seems that the CDs partically reinstall some older files. Examples: the browser I was using was Internet Explorer 8, I have been using Windows XP Service Pack 2. After you use the Windows XP disk to try one the files system and stabilise my system, my computer was back to IE 6 and Windows XP Service Pack 2 was missing altogether. Like, I ordered this drive Windows Sp2 from Microsoft (to their urgering), on a CD a few years ago, I reinstalled it from my original disc. To try to solve the problem with my computer screen constantly enter engery saving as the system mode has been started, it seems that I deleted inadvertently or otherwise destroyed the Windows Update files must verify the authenticity of my software! Any help that anyone can provide with this problem will be more appreciated!

  [Moved from comments]

  Hi William

  Windows update no longer works for systems with SP2 or less. To check your systems service pack level, click on Start, run and type Winver in the Run dialog box. If your system does not already have Windows XP SP3 installed, download and install XP SP3 from the link below. (Ignore warnings about professionals of computing and network facilities).

  Windows XP SP3.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  Windows XP SP2. (According to THE level of SP)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=28

  Note:
  If your system has a Processor AMD, download and install before installation of the SP3 of XP, the Upgrade utility Microsoft for processors not intel

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?CC=UK&LC=en&softwareitem=PV-60484-2

  If you encounter problems installing XP SP3, you can refer to the procedure described in the link below to resolve an installation failure.

  How to troubleshoot a SP3 Installation fails.

  http://support.Microsoft.com/kb/950718

• Windows Update error 8024000 cannot be repaired by renaming Spupdsvc.exe (as in kb958040)

  Update of Windows (both automatic and manual) starts without problems, detects and offers all relevant updates. Download started stalls at 0 k, 0% with download bar 'race '. 7 have no updates report 8024000.

  System: Windows 7 (64), no third-party firewall/antivirus, Microsoft Security Essentials, Windows Firewall running, no proxy (verified with winhttp). Renaming SPUpdsvc.exe (as in KB 958040) does not change the behavior. BTW: no network problem, no installation problems.

  Thanks a lot for the tips!

  Download of problem can be caused by connecting to the internet via a wireless router.

  The result code 8024000 just WU_E_CALL_CANCELLED means, the operation has been cancelled.
  Please try once more to be updated. When / if it fails, close Windows Update.

  Please copy and paste the last lines of 50 or more WindowsUpdate.log in your response -How to read the Windowsupdate.log file

  You can try to reset the components of Windows 7 update - How to reset the Windows Update components , but if the problem is either caused by a router or wireless connection, it will not solve the problem of download.

  If you want to reset the update components, download the Fixit, save it, and when the d/l is complete, close the browsers and all the open programs.
  In order to remove the 3rd party software from interfering with the operations of the Fixit, you may also configure the system before the clean boot in the running-
  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7

  When you run everything first he suggest using aggressive mode because it will reinstall BITS, which can be the cause of the failure of the download. Without seeing the WU.log, it is difficult to state when downloads fail.

  MowGreen Services update - consumer safety

• c:\windows\system32\d11872t14.dll missing file

  Original title: c:\windows\system32\d11872t14.dll

  I got a message saying that this file is missing: c:\windows\system32\d11872t14.dll. . How can I get that back?

  It confuses me again why the MS Answers forum does not prompt for any information system when a new question is asked because we don't know anything on your system.

  You see only this message when you start your system and then good, things work or come to the top when you do certain things and if so, what do you do when you see?

  I did a Google search on this DLL and did not get any results (except your message), which makes the suspicious file.

  If you see the message when you restart your system and then things work very well after that (for example, after clicking OK), I think I do it in this direction:

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• Windows Update, error of missing mscorjit.dll!

  Hello world

  Yesterday, I turned off my PC, installed Windows Update 18 updated.  Restarts in Windows, I had several identical mistakes, informing me that several of my startup programs (i.e., programs that load at startup) were: "could not load the compiler (mscorjit.dll) Jit: it may be missing or damaged."

  Well, I spent all day yesterday uninstallation and reinstallation of these programs, as well as .net Framework 4.5.1.  But I have nothing has been able to restore the missing dll file.

  Finally, today, I have restored my entire PC from a backup disk, and everything worked perfectly again - no error about a missing dll.  BUT THEN... Windows Update has installed the same 18 updates and here!, I get the same exact errors on a missing mscorjit.dll!

  Among the 18 updates, I find these on .NET Framework, although I have no idea if these specific edits are the problem:

  A security update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x 64 systems (KB2911501)

  Update of security for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x 64 (KB2898855)

  A security update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x 64 systems (KB2898857)

  A security update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x 64 systems (KB2901112)

  Update of security for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x 64 (KB2901110)

  And in a subsequent update, after the first 18 and after the dll mscorjit disappears:

  Microsoft .NET Framework 4.5.1 for Windows 7 x 64-based Systems (KB2858725

  Help!  Why Windows Update would steal my dear old mscorjit?  And what do I do from here?

  Thank you

  Jay

  Hello Jay,

  Welcome to the Microsoft Community Forum.

  I suggest you to follow the steps in this Microsoft article troubleshooting and check if it helps:

  Repair of .NET framework tool

  http://blogs.msdn.com/b/astebner/archive/2012/10/12/10359320.aspx

  Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

  Thank you

• Error 0 x 80070424 appears on the windows update site. The Windows Update service is missing from the list of Services.

  I am running Windows XP Professional SP3 with Kaspersky Internet Security 2012.  Windows is no longer automatic updates (don't know how long it has been like that), and when I try to manually check for updates from the Windows Update Web site, an error is returned: 0 x 80070424.  After some troubleshooting, I found that Windows Update is missing in the Services list.  Also, I ran a few Microsoft Fix It solutions without success.  Please notify.

  Hi Gregs,

  I suggest you to follow the steps and check if it helps.

  Method 1: Follow the steps in the link and check if that helps.

  Error 0 x 80070424 occurs when you use Windows Update, Microsoft Update, or Windows Firewall

  Method 2: Run check file system (CFS) analyses and checks to see if it helps.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

• Windows Update will not download files January 2016

  I am running Windows 7 and I am trying to download all updates from January 12, 2016.  The download does not start, sitting at 0% for more than half an hour. No error code is displayed. A laptop computer that I also use properly updated this morning. There is no problem with my internet connection.

  Windows Update displays: 23 updates, (Total of 0 KB, 0% complete).

  I restarted the computer (the button turn off had a yellow shield, indicating the necessary to install updates, closing took a lot of time to finish), when the finished computer restart I ran an app such FixIt recommended by using Microsoft Windows Update. Now, Windows Update is hung on the status of "check for Updates". Cancelled that and found another utility here:

  https://support.microsoft.com/en-us/gp/windows-update-issues?wa=wsignin1.0. As utility works for nearly 15 minutes, stuck on "Solve problems" will wait a little longer before canceling this utility.

  David

  Restart your computer and wait 30 minutes for the system to operate before you download information. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode. If the report is in one language other than English, please indicate the language.

  Please download and share with everybody fresh copies of your System log and journal of the Application (two files) of your event viewer on your disc one and post a link here. You can delete any previous copies of your OneDrive records.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• Window Update icon is missing in Windows 7

  The windows update icon does not appear in my system tray even though it has listed updates that have not yet been installed.  The icon was there for August update patches. I usually do not install the patches each month all at once, but I install them in small groups.  August I broke them into 3 groups.  The icon showed before installing the first group, but never showed after the installation of this group. The windows update service is present and shows the status of 'race '.

  Are there patches for this situation?

  Thank you

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode.

  Please download and share with everybody fresh copies of your System log and journal of the Application (two files) of your event to your OneDrive Viewer and post a link here. You can delete any previous copies of your OneDrive records.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

  General remarks on event viewer
  http://www.gerryscomputertips.co.UK/syserrors5.htm

  Notes on using Windows Update:
  http://www.gerryscomputertips.co.UK/WinUpdate1.htm

• Error 1053 When starting the spooler service. Windows Update is replace a file k 43 spoolsv.exe (453ko)

  Windows spooler service works well until Windows Update replaces the spoolsv.exe file.

  Hello

  Check this link http://social.answers.microsoft.com/Forums/en-GB/w7hardware/thread/b2b3899d-3615-4d26-8298-15841b29ec08

• After installing something from windows update my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turn off.

  Hello

  After installing something from windows update (about 300 MB in size) my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turns off.
  Then a window pops up saying "Startup Repair cannot repair this computer automatically.
  The details of the problem say;
  Problem event name: StartupRepairV2
  Signature of the problem 01: AutoFailover
  Signature of the problem 02: 6.0.6001.18000.6.0.6001.18000
  Signature of the 04:65537 problem
  Signature of the problem 05: unknown
  Signature of the 06 problem: BadDisk
  Signature of the 09 problem: unknown
  Signature of the 10:1168 problem

  System Restore does nothing, and all the other tools of recovery. :(

  Please help, it will be much apreciated :)
  DOM

  If you are sure that the problems began immediately after installing a Windows Update, use the free support of MS here:
  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.  MS - MVP - Elephant Boy computers - don't panic!

• Windows Update KB953297 installation. Downloads, but fails to install.

  Update KB953297 downloads, but fails to install

  See this discussion: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/b7598149-58e2-43ad-b8b4-1a8e4341d9e6 ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

• Windows Update error W510 try to return fail

  I have a W510 ICONIA.

  I made a recovery in the factory defects, with Windows 8. I have this tablet 1.5 years and before I updated the bios and upgrade to Windows 8.1, who I've worked with like 8 months.

  After recovery I do an update of Windows, it has 104 updates waiting, but after installation and reboot, the Tablet say "error during the configuration of windows update. Trying to restore changes. Do not turn off the computer.

  Nothing happens and I can't run windows.

  Any help?

  Someone knows how to know with update fails?

  Solved. It took so long, but he returned and then it updated correctly.

• Windows Update tab is missing from the system property

  I use windows xp sp3 and that no windows don't update tab highlighted in the property system. I tried all the things here:

  http://support.Microsoft.com/kb/326686
  but fail to solve the problem.
  Help, please

  Hi Harjap,

  It was that of the last changes made to the computer added as new hardware or software?

  Start the computer in Safe Mode. The Windows Update tab appear? If so, we can eliminate the base as the origin of the problem drivers.

  Start your computer in a clean boot. The Windows Update tab appear? If so, the problem may be caused by a software conflict.

  You have another user on this coomputer account? You are able to see the update of Windows on another user account tab? If the problem does not exist in this user account, the original user account may be damaged. Follow the steps in this document to recover from a corrupted user profile.