Windows Update restart computer - cannot turn off

Similar Questions

• Why windows update only after I turn off pc?

  Click Start disable updates of windows now.

  Many files that modify the Windows updates are used by the system in normal operation.  Cannot modify these files when they are in use.  Thus, the updated hourly changes after booting the system, but before Windows itself actually starts.  What you see when you turn off the computer is the preparation for the update will take place the next time you start.

• With this update my computer not turn off. Clears the screen, but this is all about.

  This computer is the new 12-inch mac that came out this spring.when I've updated about a month ago, it would not turn off. I got tired of hold down the b power button to turn it off. I returned it for a back earlier upward. It automatically updated again and here I am in the same disorder. I think I'll just close the lid and stop worrying in this regard.

  Stop your Mac. Use the power button if you wish. Now start with the SHIFT key is pressed. This will start in Safe Mode, with all extensions turned off. Safe mode is slow to start, so give it time, it checks a lot of staff. If it works fine in Safe Mode, restart normally. If it works now, you are finished.

  If the problem comes back after a reboot, you have an extension conflict. Disable all extensions via system preferences. To isolate which extension is at fault, turn on an extension at the same time, restart in the meantime, until you find bad.

• Windows Update causes glass/aero turns off. How to restore?

  I am currently running windows 7 Professional, and today an automatic update of windows has been installed on shutdown.  After reboot, I lost the aero glass look and it is replaced instead of greyish blue bars.  Using the system restore I can go back to glass, but as soon as the update installs again once he goes.  In any case to return the glass?

  Hello

  Do your restore and then after reboot immediately do the following:

  Configuration-Windows Updates - settings - updated Panel assigned to download but not install so that you can select
  for install or click right on and HIDE as needed. Don't forget if you restore to before these values are set
  Next, you need to put it back again. If you are sure that the question is clear, you can assign their automatic return.

  You can also update video (display driver) with this method and updated 1 AUTO driver
  immediately after the above (why and how are below) even if you only do not put in manually day
  the pilot.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Configure Windows Update 51% do not turn off your computer.

  I have windows 7 Home premium, and it is running 64-bit. I recently downloaded 12 updates for my computer at night, but when I started my computer this morning, he's stuck at 51%. It has not changed for about 2 hours and go. I would like to get help on fixing this issue, whatever they may be.

  Too bad, he finally passed 51%. It took just a few hours.

• Problem of multiple windows. Windows update 0% complete, "ready to set up Windows. "Please do not turn off your computer", etc.

  Hi all, I have recently experienced some of the problems reported here: - Windows update doesn't work (stuck at 0% for the hours) - Windows cannot stop ("preparing to set up Windows. Please don't turn off your computer") - MSE is out of date - I can't unzip files - some programs no longer work - I just can't stop some services (like Windows update). It times out. etc... I have Win7 X 64, and the last update that has worked with success has been about 3 weeks ago. Thanks for your help!

  Very well.

  Given that the 'MemTest... returned some mistakes,' contact the manufacturer for support under your warranty or Service contract. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Computer is turned off during the update of game time.

  Windows Update (set to auto) works if your computer is turned off during the update set time?

  I ask this for XP and Win 7.

  Thank you

  N °

  Assuming you want to say in fact 'off' and not 'sleep,""standby","hibernate"by 'off', or another version of not-really-off.

• Backup cancelled in Windows 7 when the computer is turned off.

  I use Windows 7 Home Premium 64-bit operating system.

  Periodically, the Action Center will display a message saying that I have to do a backup, what I do before turning off the computer. However, when I reboot the computer, I discovered that the backup has been cancelled.

  I have searched the web but can't find information about how to make the computer shuts down automatically once the backup completed successfully.  Does anyone have a solution?

  The backup has been working in the past?

  Have you ever attempted an upgrade to Windows 10 and then back to Windows 7?

  For example let's say you have your backup scheduled task to run at midnight...

  If your computer is stopped at midnight, the backup does not - because the computer is stopped and the task was "missed" because the computer has been shut down.

  If you have the backup task configured on "Run as soon as possible after a regular departure was missed":

  

  When your computer working again missed backup task starts automatically.

  If you have your scheduled backup job to run at midnight and your computer is in "Sleep" mode, you have the task configured to wake the computer to run the backup:

  

  This won't work for wake up the computer if it is in "Sleep" mode  It will not work if the computer is in hibernation or if the computer is shut down.  As you can be awakened from sleep, the computer can be awakened from sleep, but you can't be awake if you're dead (stop).  You have to sleep to being awake.  You can be awake if you're dead or hibernation.

  The 'problem' with this approach is if the computer wakes up and runs the backup it will continue to function and you don't want that.   You can the computer to wake up, run the backup, and then click Stop (or to go back to sleep) when the backup is complete, and you can configure to occur in two different ways.  If that's how you think you want things to work ask the question in the right way, and describe how you want things to work.

  If your computer is in hibernation or stop the scheduled backup will not work until the computer working again and realizes that he has missed a task... then the backup will run - if you have the task set to do as the first example.

  Depending on certain factors that have nothing to do with Windows there are ways to make your computer start at a certain time of the hibernation or shutdown (mean 23:55) so it will be quick and then the backup will take place at midnight but will continue to operate your computer unless you include an additional step to stop the system again when the backup is complete.  These things are not exactly automatically built into Windows, but there might be ways to do things the way it works.  If that's how you think you want things to work ask the question in the right way, and describe how you want things to work.

  Find how to solve is often a matter of the question or stating the problem clearly there is no guess, no things difficult and none of these proceedings of the wild goose.

  What is the problem with the way your backup works now?

  What part doesn't work the way you think it should work?

  How do you think this should work?

  How it works?

  If your computer is turned off (off) do you want that it to wake up itself, run the backup and then stop when the backup he fill?  You can do it if you want, but it takes an extra effort and has a few requirements outside the Windows operating system.

  The task of the example above is set to run every Monday at 09:00.

  If my computer is running at 09:00 on Monday, the backup will start and run Monday at 09:00.

  If my computer doesn't work at 09:00 on Monday, the backup will run as soon as possible after the computer restart us and that's fine with me.

  I do not use sleep or Hibernate so I don't have to worry about how get the copy backup to run under these conditions.

• Whenever I restart Windows 7, I have to turn off and then turn on my network connection get Windows 7 to recognize my wired Internet connection. What is going on?

  I installed Windows 7 Pro on a system newly built using a motherboard Gigabyte Z77x-UD5H, Intel I7 - 3770 K CPU and 32 GB DRAM3, on a SSD OCZ Vertex 3. Everything went well. It is now about three days, since I installed the operating system. I've been adding on software and other general photo editing programs. The Internet would still work. NOW all of a sudden I lost my Internet connection.  Whenever I restart Windows 7, I have to turn off and then turn on my network connection get Windows 7 to recognize my wired Internet connection. What is going on?

  Hello is a network installed by Apple, iTunes more often software Protocol.  If you do not use iTunes * (or other Apple related programs streaming) you don't need.  If you do not use iTunes check if there are any available software updates.

• Please God. turn off this product. Your help desk services do not work, cannot turn off. I use the retail SECTOR, xi of adobe acrobat. Connected to the internet. On more than 20 min. open for disable grayed out. Windows 7 pro x 64. This shit makes people

  Please God. turn off this product. Your help desk services do not work, cannot turn off. I use the retail SECTOR, xi of adobe acrobat. Connected to the internet. On more than 20 min. open for disable grayed out. Windows 7 pro x 64. This shit makes people use fraud. I just want what it OFF can be USED on another COMPUTER.

  can anyone in the customer support to disable this?

  Hello Terry,

  I checked the serial number and found that you have enough number of activations left to install on 2 computers.

  Please uninstall the software and activate it on another machine. In case of problems please let me know and I'll help you.

  My direct email: [email protected]

  Chat Support email:

  http://helpx.Adobe.com/x-productkb/global/Service1.html

  Kind regards

  Rave

• Hello, I can't configure Siri, Siri is enabled and when, select 'Allow' Hey, Siri "" then is presented the installer A Siri cannot hear me, what should I do? Restart the phone, turn off the Siri allow, only clean President, that done, but nothing works, i

  Hello, I can't configure Siri, Siri is enabled and when, select 'Allow' Hey, Siri "" then is presented the installer A Siri cannot hear me, what should I do? Restart the phone, turn off the Siri allow, clean the speaker, all of this done, but nothing doesn't work, it doesn't work well as Siri does not hear me!

  Fanat_UKR wrote:

  Hello, I can't configure Siri, Siri is enabled and when, select 'Allow' Hey, Siri "" then is presented the installer A Siri cannot hear me, what should I do? Restart the phone, turn off the Siri allow, clean the speaker, all of this done, but nothing doesn't work, it doesn't work well as Siri does not hear me!

  your phone must be connected to a power source to use Hey siri since you have an iphone 5.  Most recent iphone don't need to be plugged into a power source.

• Cannot use Wake on LAN, unless that "allow this computer to turn off the device to save power" is checked

  Wake on LAN - power management

  On my Media Center PC, I am unable to use Wake on LAN unless "allow this computer to turn off the device to save power" is checked (in the tab power management of the adapter in the Device Manager). "Allow this device to wake the computer" and 'Allow only a magic packet wake the computer' is checked, but become grayed out when "allow this computer to turn off the device...". ' is not checked.

  The problem is, Wake On Lan doesn't work unless the computer has been asleep for a short period of time. If I try to activate the computer using WOL after about 10 minutes, he never wake. I guess that's because "Allow this computer to turn off the device to save power" is checked, the machine is before turning off the network adapter.

  Is it possible to force the computer to disable the NETWORK card, but would retain the capability of WOL? Or ensure you THAT WOL works little regardless of how long the PC has been asleep?

  The machine is a Windows 7 PC with a Nvidia nforce network controller.

  By the way, I have a laptop on the same cable network that has all three items checked in the tab for its NIC device power management, and this machine can be awake at all times using WOL, regardless of how long he has been asleep, this issue must therefore be with the configuration of the Media Center computer.

  I would be really grateful for any suggestion, I spent a lot of time trying to get this to work!

  See you soon

  Hello

  If the systems are only a sleep you don't need a magic packet.

  If computers are set to wake on any network traffic all Ping or arp will wake them up.

  For this configuration, it is best to disable the saving of NIC.

  There may be some variations on where is the energy saving setting.

  Here are a few examples, YMMV, look around your systems.

  Example, http://www.ezlan.net/example/powersave.jpg

  Example, http://www.ezlan.net/Win7/power_sav_wireless..jpg

  Example, http://www.ezlan.net/Win7/power_save_win7.jpg

  Example, http://www.ezlan.net/Win7/adv_power-sav.jpg

  ----------------------------------

  Real means WOL shut down a computer on Hibernate real position, http://www.ezlan.net/WOL.html

  However as these has involved the PSU cooperation. Motherboard. Network card and are not considered critical by the industry for the user end is a YMMV situation.

  12 Desktop who are under my immediate control (mix and match brands and processors). Only three are fully compliant and properly awake.

  Three satisfied partially, the rest don't care my desires/needs of Wake on LAN.

  On the positive side, since it is now fashionable to go green, the percentage of new computers that keep the better sleep habits significantly improved.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• My computer has turned off all the themes of Windows 7 except Classic

  original title: My Computer has turned off all the Windows 7 themes. I can only access classic themes. How can I get new themes to return? Thank you

  Hi, my computer is Windows 7 Professional has changed suddenly automatically the Windows Classic theme and all the other themes are grey and not accessible. How can I access the window 7 themes yet. Thank you.

  You can also check in your windows Services and check that the DWM (Desktop Windows Manager) is running.

  Start button > Search > type Services and select.
  Look and to make sure it runs.

• Why windows constantly error reports and turn off

  Why windows constantly error reports and turn off. It is THE most reliable service.

  * original title - sucks of windows *.

  Hello williamiscome,

  This error message do you receive?

  The computer shuts down or restarts it?

  Let know us and we will continue to help you.

  Best regards

  Matthew_Ha

• I have a DELL Inspiron 6400 running Windows Vista. The backlight turns off.

  I have a DELL Inspiron 6400 running Windows Vista. The backlight turns off when the charger is plugged after about 10 to 15 minutes. If I shine a torch on the screen, I see about the display is always. If I select change user from the menu start or stop / restart the machine, the backlight turns on and will last for another 10 to 15 minutes. I tried in safe mode and the same thing happens. Can someone help me with this problem?

  It could be the inverter Board or the backlight itself on the way to the outside. Whatever it is, it is definitely a hardware problem and it will take a good repairman to fix. You can contact Dell and see what they would charge to fix this, just to see if it would be more cost-effective to buy a new laptop or have it repaired. Because it is 5 years since it is manufacturing, you can be better to save your pennies for a new :-(

  SC Tom