Windows Update runs continuously after the installation/purchase program for Dell Latitude E6530 with Windows 7 Pro 64-bit

Similar Questions

• Windows Update running long after the system restore Image

  This is my 2nd try at why put Windows runs so long.

  I did everything that was asked of me in my 1st post.

  My last answer a question for me was on 19 September 2016.

  Which was a Monday.
  Then silence. I don't know if anyone can help with this problem.

  It is still ongoing.

  But at least informed me that it is not something that can be done.

  Instead of silence.
  The links below are to my OneDrive. Please let me know if there is more information.

  Operating systems: Windows 7 Ultimate sp1 64-bit

  Recently I reinstalled Windows 7 with a system image backup.

  He took my computer the initial installation of Windows 7.

  When I checked for updates that need to be installed in the Windows Update control panel there are not.
  So I clicked Check For Updates.

  Rental search automatically updates, run first for 3 hours. Once again for 8 hours. Then once more for 20 hours.
  Each control time for updates still worked and no updates have been downloaded for installation.

  How can I get updates for my computer, if check for updates is not download any?

  Sheilah

  systemlog

  SystemInfo

  Try the solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-7-update-solution/f39a65fa-9d10-42E7-9bc0-7f5096b36d0c

• MSE scan runs slowly after the installation of Windows Search

  Original title: windows search

  I installed Windows search in XP, immediately after, Microsoft Security Essentials scan has slowed to the point of becoming unusable. Uninstalled search - but no improvement in scan.

  Looks like it must be a coincidence, then.

  With the free version of MBAM scan:
  http://www.Malwarebytes.org/products/malwarebytes_free/

  (You can deny the free trial for the full paid version.)

• Error when connecting on the generator of workflow after the installation... for the first time!

  Hello
  
  I installed Oracle Workflow Builder 2.6.3 recently on my system and after installation, when I'm trying to connect the generator of workflow (using the name of this particular instance database username/password), it throws me the following error message:
  
  220: cannot set NLS_LANGUAGE.
  210: oracle error: ORA-01403: no data found
  . SQL text: SELECT FROM WF_LANGUAGES WHERE NLS_LANGUAGE: l IN (NLS_LANGUAGE, CODE)
  
  In previous discussions when I searched for the same problem, I found that if
  Select the value from v$ nls_parameters
  where parameter = "NLS_CHARACTERSET";
  Returns the value of other WE8ISO8859P1 then, then that is what I should change my Builder NLS_LANG entry - i.e. AMERICAN_AMERICA. < character set >.
  
  But I don't get where should I change the NLS_LANG, located where... a file any? I'm new to workflow.
  Please help me. I tried a lot of things. Any help will be much appreciated.
  
  Thank you
  Khadi

  Khadi,

  It is windows server? You can try this

  Set NLS_LANG as an operating system environment variable:
  
  1. Select Start - Control Panel - System
  
  2. Select Environment 
  
  3. Set NLS_LANG parameter to AMERICAN_AMERICA.UTF8.
  

  Or try this

  1. define NLS_LANG Environment Variable on your PC, following below navigation :
  
  For Windows
  Start / Settings / Control Panel / System / Advanced / Environment Variables
  Define new "System Variable" NLS_LANG and assign it the value AMERICAN_AMERICA.WE8MSWIN1252
  
  Save
  
  2. Bounce the PC
  
  3. Try again database connection from Workflow Builder
  

  Concerning

  Published by: OrionNet on January 2, 2009 03:28

• BlackBerry Smartphones after the installation of upgrades for applications, the restart does not end

  When I reboot my phone after that I installed some updates for some applications, as usual--asked me to restart...

  He restarted the phone, however not completely restarts not to my home screen. Instead, he's stuck on the screen of my network provider... (o2 welcome screen)

  Im guessing it is always finished installing some updates, but it's been like this all night.

  I did a battery pull and took out the SIM card and memory card, but it always seems to be stuck on the home screen of the network provider.

  I had this problem last time, and I was informed of another forum to turn off the phone from the Off button on the phone, remove the battery and the memory card, reinsert the battery without the memory card.

  It worked perfectly the last time. Now, then the home screen displays, if I press the off button, it is 'check security software' and turns off.

  Help please!

  Hi again.

  It seemed to have fixed.

  I turned off the phone to the power button on the phone.

  Removed the battery and the memory card.

  He left for 5 minutes

  Re-insert the battery, without the memory card.

  And it starts up fine.

  Insert the memory card, and it was recognized.

  Now, the phone is normal, as it was before the updates.

  Thanks for your help anyway. According to the research I did, that my problem with the splash screen and the issue of restarting AFTER upgrades of applications took place, is the correct method.

  I will accept the solution.

  Thanks again

• Failed to start Windows after the installation of updates

  HI, I currently use windows 7 32-bit and have been almost half a year now, nothing was wrong with it until just recently when I installed updates for windows and it goes across restart process. Whenever it restarts after the installation of updates it now in windows could not start and is system launch of repairs etc, when it finishes I cliquerai on end to end and then he launched startup correctly, also, I realize account updates, I have install are successful, when I connect (from the option view update history) , but I get suggestions of exact same update again just after the installation of the updates mentioned only, hope, it is specific help enough, would be much appreciated

  Can you provide the names, the updates that have been installed?

  see this article for when you are offered the same update again and again:
  http://support.Microsoft.com/kb/910339

• Re-installing Windows XP (OEM - purchased version of njewspaper ad without mentioning it was OEM only) after the installation of the pirate Win Xp (full version). Can I retrieve pirate settings to not reinstall aps (have about 100). __

  Hello
  I'm trying to reinstall Windows XP (OEM - purchased version advertises in newspapers not to mention it was OEM only) after the installation of the pirate Win Xp (full version). Can I retrieve pirate settings to not reinstall aps (have about 100).
  (I guess I have to change registry to eventually replace OEM version with pirate version - it still would make it impossible to activate the automatic updates). Or I can just reinstall registry then replace edition OEM version? (Would still allow the applications to be installed without the re - install?) (A major pain).

  Visit the Genuine Microsoft software and click on Validate Windows.  After that validation fails, look for the Get Genuine button and click on it to find out how to acquire a Kit of WGA. Carey Frisch

• Firefox continues to run even after the release in Manager Windows tasks and has about as much memory to affect other applications

  Firefox continues to run even after the release in Manager Windows tasks and has about as much memory to affect other applications. Firefox.exe must be completed manually in Windows Task Manager. Is there a software patch that will force the release of memory and all the resources of the computer that was using Firefox, when it is finished?

  This has happened

  A few times a week

  == I see only the program in the Manager of tasks over the past months but the problem could took place for more

  See this:
  https://support.Mozilla.com/en-us/KB/Firefox+hangs#Hang_at_exit

• Windows 7 does not start after the installation of updates - sounds familiar!

  Apparently, I have another system that no longer starts after you install an update to Windows 7. New kick computer _ I have to disable the automatic update of windows. Twice I had to restore the system in the first week because he hung up after the installation of updates for windows 7. I have no idea what update is the cause of the problem.

  Essentially, start the screen goes black with the cursor blinking in the upper left corner of the screen. The only way out is to restore the system.

  Does anyone know what update is the culpret? HP support has no idea. Their only solution was to update windows 7 to 'never download an update from windows '. It is a terrible thing to be underestimated solution.

  Here's the resolution...

  I installed all the updates except KB2284742 954430, 973688 and 971033. So I decided to install these 1 4 at a time in the order shown. I installed successfully 228472 and 954430 and 973688 disappeared from the list of available updates. So I installed 971033 and it installed successfully and I was still able to restart.

  My conclusion is that there is a conflict between the first 3 updates when they are installed at the same time.

  Now my system is up to date with all windows updates and I'm able to restart without any problems!

  Close this message.

• I have a compaq presario cq60 with vista which was able to start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. What can I do?

  I have a compaq presario cq60 with vista. Could not start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. I took the hard drive and installed in my office. Windows Explorer displays the main and recovery partitions.

  The primary partition has the following folders (including hidden & system)

  The recovery partition has the following (including the language files more)

  Someone at - it ideas why my laptop does not work?

  Thank you

  Greg

  Hello

  You press F11 on startup with a HP Compaq to start the recovery process.

  For problems with the recovery process, you will need to contact HP.

  BIOS problems:

  There are messages for the HP Forums for posters with similar errors:

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/notebook-HDD-problems-TEst-status-1-07-fail/TD-p/658902

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-dv8000-getting-1-07-fail-error/TD-p/883284

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-notebook-dv6000-1-07-fail/TD-p/1069457

  All the answers it point to a drive about to fail

  See you soon.

• After the installation of Windows 'important' 3 updates my screensaver started does not. I get a message that says "ScreenSaver:Photo screensaver.scr - unable to locate component".

  Original title: screen saver does not start because MSVCR100.dll was not found

  After the installation of Windows 'important' 3 updates my screensaver started does not. I get a message that says:

  ScreenSaver: Photo screensaver.scr - unable to locate component.

  This application has failed to start because MSVCR100.dll was not found. Reinstalling the application may fix this problem.

  The screen saver starts after you close the error message. I've never had a problem with my screen saver up to that after I downloaded updates. I don't know how to reinstall the application. I tried Windows Fix - It Solutions, but it does not work. He repeated to me that it was a mistake.

  Help, please. Thank you.

  Hello

  It didn't reinstall the ATL update, it reinstalled 2005 Redistributable. So now, I have 2005 and 2010 x 86 both. And it says that two dates installiation are two days after I installed the 2010. I know 2005 and the update was uninstalled, because I checked after restart the computer and before you install the 2010 version. Very curious.

  But my Screensaver works and access to the camera seemed to work after uninstalling / reinstalling the software. So, good. Thank you.

• Blue screen continues after the recent Windows updates - Update configuration 3 of 3 0%

  original title: blue screen continues after the latest updates of Windows

  Last Thursday while I was at work, an automatic update downloaded on my computer.  When I got home, the blue screen has increased and said "update configuration".  3/3.  0%.  Do not turn off your computer.  Well, keep the computer restarts and the same screen appears.  Over and over again.  At least 40 times.  Finally, I turned the computer off and when I turned it on... I hit 'f-11' and performed a scan on everything and everything was ok.  Then I did a system restore point to before last week and he ran.  When the computer is started again, the same "update configuration" screen always shows!  How to do the work to turn back normally?

  Linda,

  The link below has options to solve your problem of loop.

  http://support.Microsoft.com/kb/949358>

  04/25 / 1112:57: 43 pm

• I am running vista ultimate SP2 32 bit. I'm unable to complete the installation. Support for koadak says that I need to update my windows install. When I go on the site microst, I don't know that one to download. Help!

  I am running vista ultimate SP2 32 bit.  I'm unable to complete the installation. Support for koadak says that I need to update my windows install.  When I go on the site microst, I don't know that one to download. I am running vista ultimate SP2 32 bit.  I'm unable to complete the installation. Support for kodak says that I need to update my windows install.    Help!

  Update your OS via windows update (start > Control Panel > Security > windows update).

• After the installation of Windows 7 repair I 219 updates. Best way to install? Small batches... oldest first? Others?

  After the installation of Windows 7 repair I 219 updates. Best way to install? Small batches... oldest first? Others?

  In the previous 18 months there have been many updates toxic that caused problems... these fixes are well eliminated or fixed retroactively or this process will be as walk minefield?

  I currently intend to install some office and .net updates separately and to wait on the optional updates updates security priority are installed.

  Thanks for any idea.

  Properly installed all updates of security except IE11 upgrade [has a full update of IE8 that should cover most security problems... [Since I use Firefox... or whatever it is, but it is to say... no biggie].

  I installed the updates [ie8, etc] 1 security and updates in batches of 20-30 for most recent first then older then. Then I installed the office updates and then a point net 3.51.research showed several versions of dot net needed.

  After each batch, I did a restore pt.

  Note: this repair facility corrected a connection problem that prevented programs and 32-bit browsers... including malwarebytes to connect to the net. I had followed the many expert suggestions to fix this problem without success before the repair facility.

• Windows 8 OEM samsung original is disabled after the installation of windows updates.

  I have the original windows 8(Samsung Laptop) confirmed by Samsung as the original windows. Have this laptop for about 2 years now and have reset my windows again. But this time after the installation of windows updates, my windows are disabled and the watermark comes and it is said to activate windows. Samsung said support windows is authentic and check with Microsoft. But Microsoft has no support for 24 hours and support is not live at this time. Can someone help me with this problem. Please, I beg you. And I tried to put the key in the firmware to activate, but nothing helped. And the OEM key is invalid for activation at all.and add I activated my windows by phone before the update using the technique of slui 4... and after it started to update. And now reactivate cant using this key method.and calling OEM is not valid anywhere.

  Hello

   
   
  Please contact Microsoft Community.
   
  We regret sincerely all the inconvenience caused to you.
   
  I suggest you try the phone activation this time and see if it helps.
   
  a. at the start screen, drag from the right side, or hover your mouse on the top right of the screen to display the menu of charms.
  b. tap or click the charm of parameters.
  c. press or click on change PC settings.
  d. If your PC is not activated, computer settings provide instructions that are customized to your activation error. If telephone support can provide assistance for your mistake, tap or click the appropriate link, which may resemble one of the following conditions:
  > Activate

  > Activate by phone

  I suggest you refer to the following article for more information.

  http://Windows.Microsoft.com/en-us/Windows-8/activation-errors
   

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  Kind regards
  Anusha