Windows Update runs for a long time without finding update

Similar Questions

• Vista has stopped turning the games run for a long time.

  Vista has stopped turning the games run for a long time. The display would go crazy and the sytem would lock. Gotta make a stop with the power button. No errors are recorded. I re-installed the game. Same thing. I reinstalled Vista 64. Same thing. I get about 3 minutes in the game and then locking the. 1 single game still work (BioShock2). COD - MW2 and COD MW lock the sytem. One is direct install, and the other is the steam. I have a video card Nvidia GTX 280 with the latest drivers from Microsoft. Before the reinstall, I tried to install the most recent NVIDIA. Did not help. Yet the locks without showing error. About half of the time it stops at my off video card a few seconds after that the display goes crazy. BioShock uses DirectX 10, and others use DirectX 11. I read on some sites that 11 causes the video crashes on some systems. I want to know is why 11 is working for so long and stop NOW. Is there a way to make the games all run on 10? COD BlackOPS crashes too. I played ALL these games over and over again until the last 3 weeks. If there was some error to post logs I would but there is not. Any suggestions on where to find some kind of problem that could cause this? The video card was removed, cleaned and put back into the computer. Still crashes. 1 in 4 of the games will take place without any problems. 3 will be blocking of the computer and the video trash in 3 minutes or less to start the game. The video is great, until blocking.

  Suggestions on how to fix or where to additional troubleshooting for the cause will be greatly appreciated.

  Try running the memory and the hard drive scan to make sure that both are good.
  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-memory-problems-on-your-computer
  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  If both check good, the map may be at fault. In which case it is overheating you can manually increase the fan speed in the Nvidia Control Panel.

• Flash lock drive toward the top of my computer when it is run for a long time?

  Original title:

  Flash drive

  Hello

  Why does flashplayer 15-0-0-189 lock up my computer when it is run for a long time?  In addition, why should I use so much memory?

  Thank you in advance.

  Hello

  This can help you that flash can get corrupted:

  Download and run the Flash Player uninstaller program.

  http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html

  Then download and install Flash Player; after him uncheck the installation of Chrome and Google etc option toolbar:

  http://get.Adobe.com/flashplayer/?promoid=BUIGP

  See you soon.

• SQL that runs for a long time

  Hi guys,.
  
  How to find the start time of the SQL statements that run for a long time and who are running in the system.

  Hello

  If they are long launched, you can take a look at the view V$ SESSION_LONGOPS. There is a column of start_time.

  Herald tiomela
  http://htendam.WordPress.com

• Windows Explorer hangs for a long time after the installation of the latest updates from Microsoft

  Hello!

  Yesterday, I downloaded and installed the latest Windows updates on the Web from Microsoft by using Windows Update.

  After that, I see a strange thing from time to time.

  Sometimes when I open Windows Explorer or on a list of logical drives reader app, the hangs of the application for 10-15 minutes (not answer).

  While it hangs, other applications can function normally if they don't read the list of drives, for example, I can use Internet Explorer at the same time.

  The appearance of the problem is unpredictable, it can happen after 10 to 20 minutes of work after the reboot, or even after 1-2 hours of labor.

  My OS is Vista Home Premium x 64, laptop Pavilion dv7 - 1157 cl.

  At the moment I don't have any antivirus software or third party drivers (I configured factory drivers only).

  Event log Windows contains no error messages, all devices are displayed in device in the form of work normally without errors management.

  I ran the test of memory with the memory diagnostic tool, it found no errors.

  Here is the list of the installed Windows updates.

  Do you have any suggestions? There may be a problem already known with some updates?

  Message edited by Gleb on 14/05/2009 08:38

  I'm surprised, there is no answer at all.

  Well, the problem has been successfully resolved by installing Vista SP2 RTM. My test program has been run 20 hours and showed no delay.

• Windows xp freezes for a long time during the installation of Windows Update.

  Original title: xp freeze during an update... what to do

  I turned on my computer for the first time in 10 days. When stop he went in update mode (21 updates) and was 19, since yesterday evening around 20:00 is this normal and if not what is my next step since he says do not close during an update?

  Hi MarcyDowning,

  If the update is blocked for hours, then you can try to restart the computer and check if it starts in normal mode.

  If not, then try to start in safe mode and try to perform a system restore:

  Step 1:

  You can check the article to start in safe mode:

  A description of the options to start in Windows XP Mode

  Step 2:

  If you are able to boot into safe mode, and then try to perform a system restore and check if you are able to boot into normal mode:

  How to restore Windows XP to a previous state

  Note: When safe mode system restore, system restore points are deleted.

  Once you are able to boot into normal mode, you can try to install the updates in batches containing updates 4 or 5 at a time and check if it helps.

  For more information, see the article:

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

• display accessor query runs for a long time with parameters null - JDEV 11.1.2.3

  I use Jdev 11.1.2.3.

  
  I have inputVO with the query as

  Select "store", as a double.

  The VO store attribute, I have inputlistofvalues that comes from storesLOVVO, which the query is like

  Select store_name, store_id from all_stores.

  Now I drag store to inputVO on the page of the user interface as inputListofValue. The user selects the value and runs the page and everything goes as you wish and in no time at all.

  Now the user manually removes the selected value from the store of the user interface and clicks a button to deal with something. But instead of calling the method that is present on the actionlistener for this method, the query of storesLOVVO runs on the server (I can see in the newspapers) for a very long time with store_name as null as a condition.

  If I run this query in SQL developer, it gives results in 0.02 sec, even with store_name as null clause added.

  Why jdev performs this LOV VO when there is no parameters?

  And if she runs the VO, why are so slow... its almost take 2 minutes and then the rest of the processing occurs.

  Yet,.

  Take a look at this to see if it helps: Andrejus Baranovskis Blog: anti-patterns ADF: dangerous tutorials - a real experience in the ADF

• MSCOBJCL.sql runs for a long time everything by applying the patch 6678700 for 12.1.1 upgrade

  DB: 11.2.0.3.0

  OS: IBM AIX 64 bit 6.1 power system

  Hi all

  MSCOBJCL.sql runs for time while using a patch 6678700 12.1.1 put level. We are the upgrade of 11.5.10.2.0 to 12.1.1

  Could someone please share why the script takes so long to run?

  Thanks for your time

  Best regards, a1_win

  Thanks Asif

• Program simultaneous 'Running' for a long time

  Hi hussein.
  
  
  I presented the following concurrent programs associated with "Advance Supply Chain Planning".
  

  Snapshot Delete Worker    Running   Normal
  Snapshot Monitor          Running   Normal
  Memory-Based Snapshot     Running   Normal

  These programs runs for 3 hours now :(
  
  Y at - it the problem with them? How do I know if they are in a loop and loop forever.
  
  
  Thank you very much
  
  
  Ms. K

  Hello

  This indicates that the patch cannot be applied to your instance. Is this the only patch that you found in the document? He has already worked? Activation of trace and debugging can be useful here.

  If no help above, I would say that you connect a SR.

  Kind regards
  Hussein

• I would like to down load 6 CC lightroom, but I received only 4 cubes revolve around a long time, without sign down load. I have windows 7, my name and my password

  I would charge him lightroom 6CC. I had only 4 cubes around in circles for a long time without any sign of low load.i have my name and my password... my computer is windows7

  If you had purchased subscription, you can download via Adobe Creative Cloud app:

  Click on the link below and download the creative Cloud configuration file and use it to install the creative Cloud Desktop application.

  https://ccmdls.adobe.com/AdobeProducts/KCCC/1/Win32/CreativeCloudSet-up.exe

  Note:

  About 4 cubes, clear cookies n browser cache and try again or try using a different browser.

• Create the accounting working for a long time program

  Hi hussein.
  
  
  Our 'create accounting' program is now strange. We running for a long time. In my view, he hit a data of the exception or blocking.
  I run perfstat to trace the problem?
  
  
  Thank you very much

  Hello

  Please refer to (Note: 453527.1 - how to Trace a competitor ask and generate TKPROF file).

  Kind regards
  Hussein

• Still for a long time, I can't install the update of security KB2416447 on my Windows XP.

  Still for a long time, I can't install the update of security KB2416447. But because Microsoft NET Framework 1.1 SP1 is missing on my PC, so I try to install Windows XPSP1a express but then I see the error message on the language is different. So I still have a security on my PC. How can he solved?

  Please answer all the questions of diagnostic following by number in your very next answer (no need to quote this post):

  1. what application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  2 to give application Norton or McAfee application ever been installed on this computer?

  3. do you have a free trial Norton or a McAfee free trial come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  ===============================================

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

• I bought CS5 on a CD for a long time for my windows 7 PC and I now want to put on my new iMac Yosemite that does not have a CD player running. Can I download it from adobe or from the app store and use my original serial number?

  I bought CS5 on a CD for a long time for my windows 7 PC and I now want to put on my new iMac Yosemite that does not have a CD player running. Can I download it from adobe or from the app store and use my original serial number?

  You can use it only on a Win computer. If you had CS6, you could do a platform Exchange but not with CS5. Here are the details of the exchanges of the platform:

  Exchange a product for a different version of the language or platform

• Hi all, I need a little help to try to solve a problem of updating Bios for a long time.

  I downloaded the new update of the Bios on the HP site. But when I try to install the update, the process goes up to only while it presents me with an error. Any help would be appreciated, I am trying to upgrade the Bios for the new firmware in order to perform a better processor. Thank you...

  Error code: 3033

  "GoTo" label not found

  on line 89 of w:\patches\i...ate\windows\installer.wbt

  My system is...

  Compaq Presario SR1339uk

  Serial number: CZB5050HBW

  System number: PS267AA

  Motherboard: Asus PTGD1 - LA

  BIOS version: 3.13 12/14/04

  Operating system: Windows XP Home Edition

  Not sure what's going on here, but here is a suggestion on how to properly install manually the update of the BIOS.

  Assume that you download SP26760.exe (BIOS 3.28)

  Start the update - go to the last message you get before it fails and stop. (must be where it prompts you to close the applications and will be saved).

  Open a DOS (command prompt).    You must be an administrator - so if you're running Vista or Win7 - make sure that 'run as administrator ' at the opening of the box.

  Once in the BACK, type:

  CD FOLDER

  go the the directory of temporary files.

  Then make a

  DIR /S 328.LE ROM

  to find the directory where the update files are located.    Type CD < directory name > to go in this directory (on my system, it was a folder called pft467D.tmp, but it might be different on your)

  CD pft467D.tmp

  Now manually invoke (the prompt back, no windows or the windows file manager) the update, with the appropriate switches.  By omitting the switches can cause other problems, as have reported activation of Windows problems.

  AFUWIN /i328. ROM /pbc

  For reference, on my system, here's what I saw in these folders:

  C:\Users\sumsolstice\AppData\Local\Temp\pft467D.tmp > dir

  Volume in drive C is DRIVE_C
  Volume serial number is FE8F-4AA6

  Directory of C:\Users\sumsolstice\AppData\Local\Temp\pft467D.tmp

  26/04/2011 11:11 < DIR >.
  26/04/2011 11:11 < DIR >...
  24/01/2006 15:31 524 288 328.le rom
  01/07/2004 10:54 53 248 AFUWIN.exe
  01/07/2004 10:54 amifldrv.sys 6 912
  21/02/2006 18:08 526 374 Installer.exe
  09/05/2006 17:10 sp26760.rtf 1 784
  11/04/2005 10:55 398 696 WBDEG44I. DLL
  6 file (s) on 1 511 302 bytes
  2 dir 110,361,944,064 bytes free

  C:\Users\sumsolstice\AppData\Local\Temp\pft467D.tmp > AFUWIN i328.rom /pbc

  It should work OK, however no guarantee if there's something else - but essentially - that's what the installer should do.   If this does not work for you - I wouldn't try to force things - you can make a good motherboard unusable quickly.

  For those who are looking to this announcement - the syntax is for this motherboard only - switches may be different for different motherboards.

  Good luck.!

  -DM (while I am an employee of HP for a long time, the comments/suggestions here are my own, not those of my employer).

• Update KB961118 continually appears in my system tray, but does not install after that many try. How can I remove it. This has happened for a long time. Help

  Update KB961118 continoulsy appears in my system tray, but the update does not install. How to remove OR install. This has happened for a long time. Help

  KB961118 is an option, not the security update. Feel free to hide it & move on with your life. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft