Windows Update will not install 9 latest updates recommended, need help!

I tried to install:

KB980182
KB977816
KB978338
KB979683
KB980232
KB981332
KB905866
KB976264
KB980248

pls help

Hello
 

a. don't you encounter any error message when you try to install or download updates?
 
You can view the history of update to find errors.
Let us make the below listed methods one by one and check if you are able to install these updates successfully.

Method 1.
If your computer is experiencing problems find and install updates of the operating system, try using the troubleshooting Windows Update tool to solve the problem. He makes sure your computer is connected to the Internet and checks to see if your network card and Windows Update services are running properly.
 
For steps about how to run this utility, refer to the article below.
Open the Windows Update troubleshooting tool
http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter
Method 2.
Try also download and install these updates manually and check. Visit the Web site below and look for the number of update and choose the right operating system for the update and try to download and install.

Method 3.
I would ask you to reset the Windows Update components and check if you still get this error message.
Click the Fix It button in the article below to do it automatically or you can do it manually. For more information, refer to the article below.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058

Method 4.
I would also recommend to install the Windows Update Agent to manage the updates on your computer.
Download and install the Windows Update Agent to manage updates for your computer.
Follow the link below to download and install Windows Update Agent:
http://support.Microsoft.com/kb/949104

Method 5.
I ask you to download the journal of cbs on the skydrive.
Navigate to the following location on your computer C:\Windows\Logs\CBS\CBS.log Can and upload your log to your public folder the SkyDrive for analysis.
 
 
I hope this helps.

Thank you, and in what concerns:
Shekhar S - Microsoft technical support.

Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Tags: Windows

Similar Questions

  • SP2 for Windows Vista will not install. Receive error 800b0100 code. Windows Update has encountered an unknown error.

    SP2 for Windows Vista will not install. Receive error 800b0100 code. I already tried all possible solutions - disabled and even uninstalled McAfee Firewall disabled, ran the CheckSUR repeatedly (see below for the final analysis), tried to install from windows update, also downloaded the stand-alone MS pack, tried selective startup and hidden States of services, still nothing. It has been 2 days work on this. Help, please!

    =================================
    Preparation of control system was updated.
    Binary version 6.0.6002.22202
    Package Version 6.0
    2009-10-24 12:36

    Checking Windows Service Packages

    Checking of manifests package and catalogs

    Checking package Watchlist

    Watchlist checking

    Checking packages
    (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
    (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.mum
    (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.mum
    (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum

    Control components store

    Summary:
    Seconds executed: 1241
    Found 4 errors
    CBS MUM lack count: 4

    Unavailable repair files:
    servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
    servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.mum
    servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.mum
    servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
    servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.cat
    servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.cat
    servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.cat
    servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.cat

    Hello Yiratr,

    Thank you for using the Microsoft answers Forums.

    Solution:

    Follow the steps in the web link below.

    http://support.Microsoft.com/kb/956702

    That should do the trick for you.

    Thank you.

    Kind regards

    Augustine.

    "URGO".

    UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO

  • I received an update on your part 10/11/10 and now my laptop will not boot in place! I need HELP.

    I received an update on your part 10/11/10 and now my laptop will not boot in place!  I need help.

    Hi bobbymh,

    -Do you happen to remember the update has been installed?

    -You receive an error message when you try to start the computer?

    Follow the steps below:

    Method 1:

     

    Try to start the computer using the last good known Configuration and check if you can successfully start.

     

    For instructions, see How to start your computer by using last good Configuration known as Windows XP .

    Method 2:

    Perform the system restore from SafeMode to a restore point prior to the show and check if this solves the problem.

    See to run the system in safe mode restore

    See also How to restore Windows XP to a previous state

    Method 3:

     

    Follow the steps listed in the following article:

    How to fix a computer that does not start

    Gokul - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • Office 2007 SP2 on Windows 7 will not install

    Recently upgraded from Vista to Windows 7. After that, a lot of problems to do Office 2003 and 2007 to play nice. Finish by uninstalling and reinstalling both. Now, applications seem to be happy, except for Word 2003 AND 2007, eager to relocate whenever they are launched. The biggest problem now is that the Office SP2 will not install. Tried registry cleaning, download .exe standalone and as an administrator and also using the tool PatchRegCleanup - x 86 .exe (which gives me a message "productcode must be determined" and makes me want to go out). Yes, Office 2007 disk is inserted. All other updates installed correctly.  Any help appreciated.

    It worked for me: http://support.microsoft.com/kb/971058. Thanks SpiritX and t. guenoun

  • Brand new Aspire XC - 603G (ACX - 603 G-UW31). Windows 7 will not install in Legacy Mode

    Hello

    I am trying to configure a newly purchased office of Acer (Aspire ACX - 603 G-UW31), who has installed Windows 8.1, for my mother who cannot grasp the steep learning curve of Windows 7 to Windows 8.

    I have a licensed copy of Windows 7 x 64 on DVD, and even after the SecureBoot mode off then launch MSC forever and then starting with F12, by selecting the DVD drive as a boot device, Windows will not install correctly.

    The very first steps of the configuration are very well, it is, I'm asking the press actually starts to any key to boot from the DVD, Windows Setup loads some files, but the problem comes when the installation of Windows. I get a STOP error to the ASF with the message "The BIOS in this system is not fully complaint ACPI." There is no BIOS update for this model. That's the traditional way...

    Any ideas?

    Thank you, Nick

    All,

    I would like to announce, we have released an update of the BIOS that supports the element of 'Throw the CSM' in the BIOS Setup menu. Please visit http://www.acer.com/worldwide/ -> select your region-> click Support-> drivers and manuals-> select your product and then download the version of BIOS released on 15/09/2014 (or later version).

    Please be aware due to material limitations when MCS-mode you may experience some audio issues HDMI.

  • Windows 7 will not install PNY 1 GB flash drive. (who has worked in the past)

    When I tried to use my flash drives today that they do not work.  When I go to Device Manager it says the driver is not digitally signed. (It's the Microsoft supplied driver). I tried the update and find a driver who says that it is digitally signed, but when I try to update it will not install because it is not digitally signed.  Help!

    Hello

    1 what other readers USB not detected on the computer?
    2. don't you make changes to the computer before the show?

    Method 1: I suggest you try the steps from the following link:

    Tips for solving problems with USB devices (applies to Windows 7)
    http://Windows.Microsoft.com/en-HK/Windows-Vista/tips-for-solving-problems-with-USB-devices

    Method 2: Also I suggest you to update the chipset drivers.

    Updated a hardware driver that is not working properly
    http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  • Windows xp will not install updates

    I did steps 1 - 10f... updates of windows will still not installed. Stopped after attempting the installation of the update.

    1. IN the stop step #9 => did you uninstall .NET Framework 4 Client Profile , or you go to step # 10 has?

    2A. When you started to see #10f, were KB2570947, KB2616676, KB931125 (update root certificates) & the Malicious Software Removal Tool , the selected updates to be installed?

    2B. what (s) [including any error number] you got during the installation of the system failed?

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Notwithstanding these questions...

    OPTION A: Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

    OPTION B: There is a good chance that you see the effects of a hijackware infection!

    NB: If you had no installed anti-virus application or subscription has expired * when the machine was first infected * or your subscription has expired since or the machine is not kept fully corrected in Windows Update, don't waste your time with any of the below: go to OPTION C below.  A repair install won't help!

    Microsoft is sponsoring free, online (third!) for questions: http://supportservices.microsoft.com/support/services/virus_malware_removal

    OPTION C: Your misguided use of Wise Registry Cleaner, cleaner CCleaner registry and/or Ashampoo may have "screwed the dog" here.

    Follow the instructions in this post of mine in another forum (to-the-letter & in order!) to restore your computer to a State safe & functional: http://aumha.net/viewtopic.php?f=62&t=44636

    If you need additional assistance with the clean install, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Note: The computer must not be connected to the internet or local networks (i.e. other computers) in its current state. All your personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.

    Wish I had better news for you.  Good luck!

    1. uninstalled the .NET Framework 4 Client Profile
    2. one. Yes, these updates have been selected
    b. same error as before.  'A problem on your computer is preventing the updates being downloaded or installed' no error number.  Just say install again or try the troubleshooter.

    Option C seems the best option.  But if I get support should I only list the an a security update for windows xp kb2570947?

  • An update of windows 7 will not install my system hair upward

    I have a Dell Studio 1555.  everything was fine until the update for daylight saving time.   It downloaded, but I can't install it.  My system has just tried to install it forever. I can get out of the installation without end by closing and removing the battery, but it will happen when I try to quit again.   I changed installation mys to ask aboiut installs but I see no way to remove the file that is there and Windows always try to install again.

    any thoughts?

    What he says is that these updates of advanced savings are honestly not necessary for 99.9999999999999999% of humanity.

    You can hide without any problems in the long term.

  • Windows Vista will not install new updates after installing SP2

    Hi, I have a problem with the update of my windows. It started after a fact a factory reset. Here's the history:

    I have a some what old laptop (8 years). It came with a Vista installed with service pack 1 installed at the factory. Over the years, I did a few factory resets (every 2-3 years). I never had problems up to now. What is happening now is that I can not exceed SP2. I tried two different ways, none of them worked. After the reset, I first uninstall a bunch of stupid programs that came with the laptop, and then defragment and then have two ways to proceed. I tried to use windows update, installed more than 100 updates, updates install held until finally I offered service Pack2, installed successfully but then no more updates were offered. Then I tried a different approach - a new reset, uninstall, Defrag, and then downloaded and installed SP2 directly from the Download Center. And again the same thing happens. From the SP2 installation I check updates, download the new update agent and nothing happens after that. He keeps looking for new updates all day (about 50% of the processor by using all the time).

    I read some articles and discussions but could not find anyone with the same problem (most of the users reported some error codes which is something I can't do). I tried the fix tool - it does nothing! Whenever I run it, it is mistakes - sometimes 2, sometimes up to 5. Sometimes, it makes account all fixed, other times that it reports missing or corrupt files do not set. Whatever the results if I restart and when I try to check for updates again it is still the same story.

    Also I tried to install it manually IE9 as soon as SP2 is installed (I understand that this is not supported under SP1) but the installation fails. I expected to be available in updates, but as I don't get updates I tried to install it myself. Not sure if it's related (although I guess it is), but the Defender is not able to verify new definitions either.

    Any suggestions? Maybe the registry is damaged or some of the files using the update agent is are corrupt? There are currently no antivirus program installed that could block whatever it is. I haven't touched Windows Firewall somehow everything must therefore be attributed to the default values.

    You understand is that? I came across exactly the same problem... restoration of an old book to give to a family member, and every time I came to the point of installing SP2 and a more recent windows update agent just after, I couldn't install more updates. It would block 'check updates' forever. Tried twice, same problem. However, I tried some things differently the third time and exceeded the question.

    Let me know if you still need help, and I will respond with what I've done.

  • Windows 7 will not install the drivers or windows updates

    Hello

    I tried to update my iPhone 5 and in the middle of the update, when my computer tried to install a new device driver, the installation failed. I tried to use a flash drive I've ever used on my computer and its driver installation failed as well. However, I used the iPhone 4 friend (that I used to have) and it worked fine. It seems that my computer don't just install the new drivers. The drivers that I have used before still work. In addition to my driver problem, my computer will also not succeed a windows update. Download updates, but then when I restart the computer to apply the updates, it fails every time. Any idea will be useful. My phone is currently stuck in recovery mode and iTunes can't recognize it to restore it because of my driver problem.

    Thank you

    Hello Cara,

    This problem is usually due to any third-party security software that blocks the installation. I would like to know some information about this problem so that we could help youo more.

    1. what security software is installed on your computer?

    2. do you get any error code or error message? (Mention the error message)

    3. have you made changes on the computer before this problem?

    As a first step, I suggest you to reset the Windows Update components and check.

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058/en-us

    I would suggest trying the following methods and check if it works for you.

    Method 1:

    Run the fixit for the following Microsoft Fixit.

    The problems that the programs cannot be installed or uninstalled:

    http://support.Microsoft.com/mats/Program_Install_and_Uninstall

    Method 2:

    Temporarily disable the security software and check if the problem persists.

    Disable the antivirus software:

    http://Windows.Microsoft.com/en-us/Windows/disable-antivirus-software#1TC=Windows-7

    Warning: If you need to temporarily disable the security software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 3:

    Try the steps in the following Microsoft Support article and check if it helps.

    How to fix problems with the Windows service install:

    http://support.Microsoft.com/kb/2438651/en-us

    Please reply with the status of the issue so that we can better help you.

  • Update of Windows 8 will not install updates pending.

    When troubleshooting windows8 update I received this message:

    This applies to the error codes:

    WindowsUpdate_8024a000

    • 0x8024a000

    My problem is twofold - 1) waiting for updates will not be installed. (2) I sometimes get a message re being on a connection counter culminating in the W8 update not to continue with the process.

    I tried the process of troubleshooting as a user, and then as a Director, sometimes that translates an off "one" solution However, the next time I try I have the same problem all over again.  Can you help me please?

    Click Start
    Type: cmd
    Right-click on cmd in the start menu and select "Run as Administrator"
    Type: net stop wuauserv
    Press enter
    Type: ren c:\windows\SoftwareDistribution softwaredistribution.old
    Press enter
    Type: net start wuauserv
    Press enter
    Type: exit
    Press enter

    `~`

    The current time and the date now in Baja California, Mexico

    18:13
    Friday, May 24, 2013
    DST - 0700 UTC
     
    UTC/GMT is 01:13 on Saturday, may 25, 2013
                
    Current weather conditions in San Felipe

    Sunny67 ° F / 19 ° C
  • Windows 8 will not install updates

    Hello, I tried this

    1. stop the service automatic updates of component client (type net stop wuauserv in command prompt);
    2. from the Explorer navigate to the C:\windows\SoftwareDistribution\Download folder delete all files & folders;
    3. restart the service of automatic updates (type net start wuauserv in command prompt);
    4 re - run Windows Update.

    and by installing the updates one

    and using standalone installers and nothing works for me! Please help me!

    Thanks, but I have Self solved the problem myself by installing some updates at the same time and was able to install Windows 8.1 once more.

  • Another problem of Installation of Service Pack 1 of Windows Vista - will not install

    Hey guys, a greeting from Belgium in my first post.

    I recently reinstalled my Windows; This is a Home XP and a Vista Edition Home Premium (updated, so I need to install XP first).
    When I got it setup XP, which goes perfectly to SP3, I switched to Vista. All the small updates installed outside for a few "failures" caused by Vista stop updates itself, because they were not absolutely necessary.

    When SP1 popped up, I decided to download both and see other things, but when you try to install through Windows Update I get the error message "this update cannot continue while some services are still in use" or so, I don't remember the exact message or code.

    When I downloaded the SP1 on the Microsoft site, it worked better and smoother then Windows Update but also to is crushed when the progress bar has been a little more than half. Yet once again, I don't know the exact code but I do not know the message: "update cannot continue because of an internal problem.

    That's what I tried:

    -Retry it 40 times
    -Try in safe mode
    -Turn off all the other third part of the programs, including Win Defender
    -Tried the system update tool
    -Keep hope

    That's what I did afterwards:

    -Save all my settings
    -Rebooted and selected the dualboot XP
    -Formatted the separate partition holding the part of the dualboot Vista
    -Reinstalled on the same partition with the recommended settings, no change

    I would like to have an answer soon, people. I would be incredibly grateful if this could be resolved. Future changes may include error codes given.

    Hello Fallycrom,

    Thank you for using the Microsoft Answers forums.  We have the exact error message and the error code to help you. I suggest you check that you don't have any unknown hardware.  Click Start (Orb), then right-click on computer and choose Properties.  Select Device Manager and see if you have devices mark or explanation.  If you do, you will need to install the drivers for this device.

    Thank you for using answers Forum. Please let us know how it works.

    Joseph
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows 7 will not install the driver for hp deskjet 6540

    I followed all the instructions on the site of HP and windows will not find and install the driver for my HP 6540. How to make Windows do what should or is there a reliable place to download the driver from?

    There is a driver recommended relatively complete for the Deskjet 6540 written by HP and Microsoft via Windows Update.  If the automatic install does not work, perform the following steps: connect the printer by USB.  Click Start, devices and printers, adding a printer, select the appropriate port and when the list of printers, click Windows Update in the lower right part of the dialog box.  It will take a few minutes for the update to complete, once that he choose the Deskjet HP (Hewlett-Packard no) 6500 Series.

    If for some reason you can't use the driver provided through Windows Update, you can download the driver from the Windows Catalog site.  The Windows Catalog site requires the use of Internet Explorer.  For the Dsekjet 6500 Series there are three drivers listed.  11.4 Mo is the x 86 32-bit driver.  11.6 Mb file is x 64 64 bit version.  13.9 MB file is the least common architecture IA64.

  • Windows XP will not install. Where is the file asms? I washed the CD and it is in the drive

    I have installed a different hard drive and tried to install a legitimate copy of Windows XP.  He stopped at 39 minutes and request for the file 'asms '.  The CD is in the drive, why it will not continue?

    LMB

    Hello

    1. What is the exact error message?
    2. were you able to install Windows XP without any problems previously using the same CD?

    Read the following article which can be useful:
    "The file 'Asms' on the CD-ROM Windows XP Professional is needed" error message when you install Windows XP
    http://support.Microsoft.com/kb/311755

Maybe you are looking for