Windows Update will not install the 2587968 for Outlook junk e-mail filter. I get an error 57 a code.

Similar Questions

• Windows 7 will not install the driver for hp deskjet 6540

  I followed all the instructions on the site of HP and windows will not find and install the driver for my HP 6540. How to make Windows do what should or is there a reliable place to download the driver from?

  There is a driver recommended relatively complete for the Deskjet 6540 written by HP and Microsoft via Windows Update.  If the automatic install does not work, perform the following steps: connect the printer by USB.  Click Start, devices and printers, adding a printer, select the appropriate port and when the list of printers, click Windows Update in the lower right part of the dialog box.  It will take a few minutes for the update to complete, once that he choose the Deskjet HP (Hewlett-Packard no) 6500 Series.

  If for some reason you can't use the driver provided through Windows Update, you can download the driver from the Windows Catalog site.  The Windows Catalog site requires the use of Internet Explorer.  For the Dsekjet 6500 Series there are three drivers listed.  11.4 Mo is the x 86 32-bit driver.  11.6 Mb file is x 64 64 bit version.  13.9 MB file is the least common architecture IA64.

• My windows update will not install the new version of windows update, I get the error code 80070020 on a 64-bit vista SP2

  My windows update to install a new version of windows update says it acts like it will download and install it then gives me the error code 80070020 and says that my computer is unable to download or install new updates or new version of the windows update. I have a 64-bit windows vista SP2 and my avira antivirus program that has a real-time protection. I tried to do a clean boot upward and tried every possible tip I found on the Microsoft and through suggested methods help panel, I found. My computer has Avira Antivirus that has real time protection I deleted and tried without that somewhere because he said it could be antivirus programs that include real-time protection. Does anyone have advice good?

  Hello

  1. What are the troubleshooting steps correct you did to fix the problem?

  2 did you a recent software or changes to the material on the computer?

  I would say allowing you to run the FIXIT from the link provided and check if it helps.

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates

  http://support.Microsoft.com/kb/883825

  You can also try the manual steps and check.

  If you follow the manual steps to start the computer in a clean boot state, remember to start the computer in normal mode after you have completed troubleshooting.

  Note: when you are finished troubleshooting, follow step 7, mentioned in the article to start the computer to a normal startup.

  Note: It is possible that some data could be removed if infections are detected.

  Hope this helps and keep us posted.

• Windows Update will not install the hotfix on Windows Server 2008 R2 Service Pack 1 KB3122648

  Hello

  I tried several times to install "MS16-019: Description of the update of security for .NET Framework 3.5.1 in Windows 7 Service Pack 1 and Windows Server 2008 R2 Service Pack 1" on a Windows Server 2008 R2, running Service Pack 1

  Windows Update has always ends with 'Failure' / has encountered an unknown error. Code 80073712

  The convenience store has not solved it either.

  The server is not really exposed to 'outside' as such, runs in a local network, regular, small; but sometimes, a web browser may be in use.

  Is there anything that can / should be done here to remedy the failure of the installation? Or free time and even not to worry about this?

  It would be great to have a few strong indications here. Thank you!

  System File Checker shows errors that are likely to cause problems with Windows Update. I would like to reinstall Windows Server 2008. That said, I have no direct experience of Windows Server 2008, so I'm not really able to help you.

  The Microsoft Community Forums are intended to provide support in hand to hand for users of Microsoft products. These products are not Windows Server 2008. You can request additional assistance through the TechNet forums:
  https://social.technet.Microsoft.com/forums/en-us/home

• Windows Update will not install, I get message 0.800700005.

  Windows Update will not install, I get message 0.800700005.  I'm not available updates when I shut down my computer and cannot access Internet Options in the Tools menu of WE.  Computer works well but no updates or the Option settings. Help

  Hello

  1 update you are trying to install?
  2. don't you make changes on the computer before the show?

  Method 1:
  Run the fix it and check.
  http://support.Microsoft.com/mats/windows_update/

  Method 2:
  Try the procedure described in the supplied knowledge base article and check.
  Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update
  http://support.Microsoft.com/kb/968003

  Method 3:
  You can try the steps and check if you are able to install the update.
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798

  Registry warning:
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

• my windows updates will not install error d 000737

  my windows updates will not install error d 000737

  Please visit: How to reset the Windows Update components? Carey Frisch

• Windows Update will not install downloaded updates.

  Win 7 pro x 64

  AVG AV worm: 9.0.869

  Zone Alarm Pro ver: 9.3.014.000

  Malwarebytes worm: 1.46

  SpyBot S & D worm: 1.6.2

  Ad-Aware Free (2010)

  This is my first post on this forum so excuse all the errors in the placement of the info.

  WU, MU will not install the updates downloaded or optional updates selected. No error code is given, it remains at 0% for as long I leave or I cancel installation. I tried to install individually in MS catalogue still will not be installed. This is a new computer that I built in July and punishment, it has not been used. It's strange because for the first three weeks of this computer, I had no problem with the installation of all available updates, or anything else. Then when the updates of August were available I chose all security updates and install optional updates that have already downloaded click on the button and nothing happened, it remained only on 0%. My question is, is there an update that was given earlier that caused these updates not installed? I really want to use my new computer, but I don't like to run without new security and the latest updates. I had trouble before what do.

  I used all the security software listed above on all my computers for about 5 to 10 years and non of them are set to prevent windows update from working.

  Please try another attempt to update, y d diddty. During the update installation fails again, close Windows Update.

  Open the WindowsUpdate.log and copy & paste in at least the last 50 lines or so, in your response, please.
  How to read the Windowsupdate.log file

  Meanwhile, suggest to configure Windows 7 to the clean boot and see if he can install updates in the clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  NOTE: in the Clean boot state ZoneAlarm will be disabled. Make sure that the native Win 7 firewall is now on in the Panel.

  While in the clean boot state, you can also try to download and Save the Fixit found here -How to reset the Windows Update components?
  Once the download completes close all open programs and browsers.
  Now launch Microsoft Fixit 50202.msi and choose the default mode.
  When it has finished turn the system reboot to clean it from same start State and see if updates can install now.

  If no joy, run the Fixit once more and choose aggressive mode.
  Then restart on the same State of clean boot and see if update succeeds now.

  Expert MowGreen Windows IT Pro - consumer safety

• Windows Update does not install the updates from 14/04/2009. Error code 80070002.

  I'm running 32-bit Windows Vista Home Premium on a Dell Dimension E520 PC desktop with processor Pentium dual core and 3 GB of RAM.
  Reasonably up-to-date hardware. Well protected and all software security entirely to so far.
  My problem that goes from Windows Update is not install updates from 14/04/2009 and returns the error Code 80070002.
  I followed the advice and went in the Windows Software Distribution folder and remove all the contents of the data store and records downloads and tried again about thirty times now.
  I get regarding the acceptance of the license agreement and clicking on, ok, when Vista dims the screen and asks if I started it and then the error message in Windows Update, saying: "some updates were not installed."
  Is not a computer expert, I guess that what is described in help Windows Update error Code 80070002 is the same as 0 x 80070002 for which I found advice on a Microsoft page to save these commands
  net stop wuauserv
  CD %systemroot%\SoftwareDistribution
  Ren Download.old download
  net start wuauserv
  as a windows batch file and run as administrator.
  I now have a download folder and Download.old folder. Fascinating but no help at all!
  I infer that the numbers of 0x0 are my six error codes failed attempts to install Vista Service Pack 1, a few months ago who always ended up with an unusable computer suspended with a black screen and the white writing showing 46 thousand of 96 thousand file and something, followed by a number of 0x0.
  The only way I could get of these attempts was by booting from the Installation of Vista disk, masking the Service Pack 1 update and using the system restore, but that's another story.
  Have an impact on my current problem, I wonder?
  For absolute clarity are the updates that won't install:
  Explores update for Internet Explore 7 edition (KB963027) 14/04/2009 (Just editing that.) Typed a wrong number in a first time. Sorry).
  Four updates of security for Windows Vista (KB952004) (KB956572) (KB959426) (KB960803)
  Windows Malicious Software Removal Tool - April (KB890830). (I downloaded it manually and run it from my office and we found no problem).
  Update of security for Microsoft Office System 2007 (KB960003)
  Update of security for Microsoft Office Excel 2007 (KB959997).
  I'm at a loss what to try next.
  FYI, I use Uni-bleu Power Suite 2009, McAfee Total Protection and Ad-Aware Anniversary Edition with Ad-Watch Live on.
  I tried to do everything that it with Ad-Aware died, but my hunch is that the problem is in Vista ot the updates themselves.
  I'm quite competent with guests of orders, not to mention manually editing the registry!
  However, any help would be received with gratitude and I guess that if the instructions are evidence of fool I have very carefully follow step by step.

  I have the same symptoms: from a distinct point in time updates of windows works more and every time returned the error code 80070002.
  After a few hours, I found the solution: sfc/scannow reported the wuauclt.exe file.
  And the reason was: McAfee virusscan put this file in quarantine. He is falsely W32/Generic.worm.aa in there.
  Restore this file from the GUI of McAfee completely solved this problem.

• Windows Update will not install 9 latest updates recommended, need help!

  I tried to install:

  KB980182
  KB977816
  KB978338
  KB979683
  KB980232
  KB981332
  KB905866
  KB976264
  KB980248

  pls help

  Hello

   

  
  a. don't you encounter any error message when you try to install or download updates?

   

  You can view the history of update to find errors.

  Let us make the below listed methods one by one and check if you are able to install these updates successfully.

  
  Method 1.
  If your computer is experiencing problems find and install updates of the operating system, try using the troubleshooting Windows Update tool to solve the problem. He makes sure your computer is connected to the Internet and checks to see if your network card and Windows Update services are running properly.

   

  For steps about how to run this utility, refer to the article below.
  Open the Windows Update troubleshooting tool
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  Method 2.

  Try also download and install these updates manually and check. Visit the Web site below and look for the number of update and choose the right operating system for the update and try to download and install.

  http://www.Microsoft.com/downloads/en/default.aspx

  
  Method 3.
  I would ask you to reset the Windows Update components and check if you still get this error message.
  Click the Fix It button in the article below to do it automatically or you can do it manually. For more information, refer to the article below.
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  
  Method 4.
  I would also recommend to install the Windows Update Agent to manage the updates on your computer.
  Download and install the Windows Update Agent to manage updates for your computer.
  Follow the link below to download and install Windows Update Agent:
  http://support.Microsoft.com/kb/949104

  
  Method 5.

  I ask you to download the journal of cbs on the skydrive.

  Navigate to the following location on your computer C:\Windows\Logs\CBS\CBS.log Can and upload your log to your public folder the SkyDrive for analysis.

   

   

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• A windows update will not install...

  One of my windows updates will install on my old xp pc. I get the yellow shield update indicating an update must be installed poping up on my screen, what do I do about...?

  Hi John C Todd,.

  ·         Did you do changes on the computer before the show?

  ·         You receive an error message or error code?

  I suggest you to follow the steps in the Microsoft Knowledge Base article and check.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Let us know if that helps.

• Update for Outlook junk e-mail filter keeps

  Every day for a month I get notification of the need for an update.  The update is for Outlook junk mail filter.  The update appears to install ok but he will come back a few hours later and wanted to do it again.  It's not really install or Microsoft doesn't realize that it is installed.  In any case, it makes me nuts to install this thing day after day.  Help!

  Hi Larry 77,.

  ·         The update is installed correctly?

  View update history if the update is installed.

  Follow the steps in the article.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

  If not, install the update.

• Windows 7 will not install the drivers or windows updates

  Hello

  I tried to update my iPhone 5 and in the middle of the update, when my computer tried to install a new device driver, the installation failed. I tried to use a flash drive I've ever used on my computer and its driver installation failed as well. However, I used the iPhone 4 friend (that I used to have) and it worked fine. It seems that my computer don't just install the new drivers. The drivers that I have used before still work. In addition to my driver problem, my computer will also not succeed a windows update. Download updates, but then when I restart the computer to apply the updates, it fails every time. Any idea will be useful. My phone is currently stuck in recovery mode and iTunes can't recognize it to restore it because of my driver problem.

  Thank you

  Hello Cara,

  This problem is usually due to any third-party security software that blocks the installation. I would like to know some information about this problem so that we could help youo more.

  1. what security software is installed on your computer?

  2. do you get any error code or error message? (Mention the error message)

  3. have you made changes on the computer before this problem?

  As a first step, I suggest you to reset the Windows Update components and check.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us

  I would suggest trying the following methods and check if it works for you.

  Method 1:

  Run the fixit for the following Microsoft Fixit.

  The problems that the programs cannot be installed or uninstalled:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Method 2:

  Temporarily disable the security software and check if the problem persists.

  Disable the antivirus software:

  http://Windows.Microsoft.com/en-us/Windows/disable-antivirus-software#1TC=Windows-7

  Warning: If you need to temporarily disable the security software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3:

  Try the steps in the following Microsoft Support article and check if it helps.

  How to fix problems with the Windows service install:

  http://support.Microsoft.com/kb/2438651/en-us

  Please reply with the status of the issue so that we can better help you.

• for PowerPoint 2003 security update will not install the kb969615 error code 0 x 4397

  HAVE NOT BEEN ABLE TO INSTALL MORE THAN ONE YEAR.  HAVE RUN REPAIR WINDOWS UPDATE MADE CORRECTIONS, BUT DID NOT ALLOW THE INSTALLATION OF UPDATE.

  Try to download and install the stand-alone version: security for PowerPoint Viewer 2003 (KB969615) update

• The 3rd part of a windows update will not install. What can I do?

  Hi there Microsoft overlords. I was wondering if you could help me. I've seen a similar thread on the final update not install it, but I don't know enough about variables in order to know if it is a minor or major problem and how to fix it. Any help woul be appreciated.

  I am running Windows Vista on a Toshiba Sataleite Pro 2010. I ran two FULL virus scans last night, with Avast free protection and another with Windows Essentials I think. Windows has found a number of serious threats that I hit the function apply on. Then I did a scan with Avast.

  Then after I finished the second virus with Avast scan, the laptop began something strange. The screen went black shortly after it (not immediately think"I") and he began to make a safe-mode-esque all programs, including the documents and my downloads of loading. He said it was a bookkit or a rootkit or something similar. I don't quite remember.

  In any case, I leave this list of command of rootkit series go on a little I don't know initially, he said "I want to check all the files of rootkit or bookkit for security", yet once I do not what that.

  I let happen to 7% completed which took between 30 minutes and an hour to reach. I then press ESC to cancel the process which he allowed me to do.

  After that, the pc began to restart dozens of times trying to reinstall a 3rd update of windows (which remains at zero percent).

  If it's any help I had a windows update for last night. I had to have one, but I postponed it for a few hours.

  Also, I think that the laptop can (MAY I'm not sure) ran out of power last night to stop.

  I think I let him run out of power because he was stupid before you stop, even if I can't be sure.

  Thanks for any help, if you need more information do not hesitate to answer.

  p.s. I tried to go to SafeMode to start again, but now it is useful. Safe mode programs load then IMMEDIATELY (until I can get to s a start menu or anything like that), she goes in this cycle to shutdown/reboot/update.

  Thank you. Helllp me :-)

  My apologies. I don't know much on the PC at all and I couldn't remember what I had done or read yesterday evening.

  Fortunately, my laptop is now fixed. I had nothing too precious that I had not already supported so my brother reinstalled windows on it again and it is fine now.

  Thanks for the help. Soon :)

• Windows Update will not install - Windows could not search for new updates to Code 8007051 A

  original title: impossible to install iTunes error HRESULT:0x8007051A and Windows Update doesn't work Windows could not search for new updates to Code 8007051 A

  Am running Vista 32 bit OS and trying to install iTunes but still get the following error;

  ' Microsoft.VC80.CRT.version = "8.0.50727.4053".Guy = "win32".publicKeyToken

  "="1fc8b3b9a1e18e3b".processorArchitecture ="x 86" also HRESULT:0x8007051A

  Some research has indicated that it was due to a problem of update?

  Then tried checking updates (Windows update), who does not ("" Windows could not search for new updates - errors found Code 8007051 A ' ")

  The "get help" link was as useless as an ashtray on a motorbike.

  Any help would be greatly appreciated

  Hi Discopossum,

   

  How long have you encountered this problem?

  Method 1: Run the fixit available in the links below and check if that makes a difference-Worth to try
  Difficulty of broken desktop shortcuts and common system maintenance tasks

  Note: FixIt would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  Method 2: Try to install the program as an administrator do a right click on the program installation files and select run as administrator, click on continue if you are prompted to confirm.

  Method 3:  Clean boot the computer and then try to install ITunes

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Method 4:  Run the fixit available in the article below to reset the Windows Update components

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  If problems with iTunes didn't exist yet, contact the Apple Support
  http://www.Apple.com/support/iTunes/