Windows Update will not install - Windows could not search for new updates to Code 8007051 A

original title: impossible to install iTunes error HRESULT:0x8007051A and Windows Update doesn't work Windows could not search for new updates to Code 8007051 A

Am running Vista 32 bit OS and trying to install iTunes but still get the following error;

' Microsoft.VC80.CRT.version = "8.0.50727.4053".Guy = "win32".publicKeyToken

"="1fc8b3b9a1e18e3b".processorArchitecture ="x 86" also HRESULT:0x8007051A

Some research has indicated that it was due to a problem of update?

Then tried checking updates (Windows update), who does not ("" Windows could not search for new updates - errors found Code 8007051 A ' ")

The "get help" link was as useless as an ashtray on a motorbike.

Any help would be greatly appreciated

Hi Discopossum,

 

How long have you encountered this problem?

Method 1: Run the fixit available in the links below and check if that makes a difference-Worth to try
Difficulty of broken desktop shortcuts and common system maintenance tasks

Note: FixIt would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

Method 2: Try to install the program as an administrator do a right click on the program installation files and select run as administrator, click on continue if you are prompted to confirm.

Method 3:  Clean boot the computer and then try to install ITunes

Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

Method 4:  Run the fixit available in the article below to reset the Windows Update components

How to reset the Windows Update components?

http://support.Microsoft.com/kb/971058

Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
How to back up and restore the registry in Windows

If problems with iTunes didn't exist yet, contact the Apple Support
http://www.Apple.com/support/iTunes/

Tags: Windows

Similar Questions

  • Windows 7 could not search for new updates code error C80003FA

    I just activated Windows 7. When I tried to update, I have "Windows 7 could not search for new updates C80003FA error code".

    Tried three times with the same result. Could someone, please?

    C80003FA ReadVerifyFailure - a read verification error occurred.

    1. What is the suite of security/antivirus installed?
    2 is a 3rd party firewall installed?
    3 - is an upgrade to another edition of Windows?

    Please click on the round of departure. In the search field type programs and files in wups2.dll

    Under programs right click wups2.dll and choose Properties, when the Properties window opens, click the Details tab.
    Version of the file and the product should be showing 7.4.7600.226
    Now do the same for c:\windows\system32\wuaueng.dll
    He, too, should show file version and product like 7.4.7600.226
     
    If the version is earlier than that, you will need to install the more recent Version of the Windows Update Agent.
    The easiest way to do this is therefore download and Save the Fixit found here - How to reset the Windows Update components?
    Once the download completes close all open programs and browsers.
    Run MicrosoftFixit50202.msi and choose its default mode.

    BUT, if the installed firewall antivirus/security suite or a 3rd party is causing the "reading check error" then the Fixit may/does not work.
    If this is the case, then Configure the system to boot after download and Save the Fixit.
    Then, run the Fixit after the reboot to clean boot state.
    Restart and Cancel the clean boot steps, restart again to normal Windows mode.

    NOTE:
    in the boot minimum state all the 3rd party firewalls will be disabled. When you run the Fixit either unplug the system from it is the network connection or make sure the native firewall of Windows 7 is now on by opening the control panel > Windows Firewall.

    Expert MowGreen Windows IT Pro - consumer safety

  • Vista - Error Code: 80070426 (Windows could not search for new updates)

    I have Windows Vista Home Premium Service Pack 2 on HP Pavilion dv6700 Notebook PC 64 - bit operating system. For about a month, it stopped updating. Whenever I want to update it gives me the same message "Windows could not search for new updates. Error encountered, Code 80070426 ".

    After the possible solutions for others, which posted a similar problem, I typed "service" on start search and on the side slsvc, it gives a description. When I click Start the service, it gives me the message "error 2: the system cannot find the file specified."

    I appreciate any back feeding to help me solve the problem.

    Thank you

    Mikielle

    mikielle,

    0x80070426 - ERROR_SERVICE_NOT_ACTIVE the service has not been started

    Make sure that the automatic update services has been started.  Make sure that BITS is started.

    1. click on start and run, type services.msc, and then click ok.

    2. in the list of services, click on automatic updates, and then click Properties.

    3. in the startup type list, click Automatic, and then click on apply.

    4. If the service status is stopped, click Start, and then click ok.

    5. right click on background intelligent transfer service, and then click Properties.

    6. in the startup type list, click Manual, and then click on apply.

    or

    1 ddwnload and install the wga http://go.microsoft.com/fwlink/?linkid=56062 diagnostic tool

    2. after running the wga diagnostic tool, click the "windows" tab and then click on 'copy to clipboard '.

    3. then, visit the following Web site and create a post in the forum "problems of wga validation" and paste the results of the diagnostic data in a detailed post wga:

    http://forums.Microsoft.com/genuine/default.aspx?siteid=25

    4. a wga troubleshooting specialist will analyze the data and recommend an appropriate solution.

  • Windows could not search for new updates. Error 8024402f code. Fix available?

    Windows could not search for new updates. Found error 8024402f code. I tried everything, but the problem has not been resolved.  Vista service pack 2 build 6002. is any kind of fix available? I tried the fixit. It shows the Update component must be repaired and there is no problem, but in fact it is not the problem. Updates have been arrested?

    You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
    http://support.Microsoft.com/kb/836941

    These errors can occur caused by one of the following problems:

    • Applications or processes that interfere with Internet communications
    • Problems on your computer
    • Strong Internet activity
    • Recoverable database errors

    If the fixit doesn't do the trick, you will need to manually go through the troubleshooting utility.

  • Windows Update could not search for new updates

    Update of Windows gives an error, Windows could not search for new updates
    Error (s) found:
    Code D 8007370 Windows Update encounter an unknown error. There is no articles about this error code, and the last windows update has been installed on 2 May.  Fixes for this problem?

    Hi Rob_in_COS,

    Thank you for using answers Forum.

    I found this article which deals with your question:

    System Update Readiness Tool what Windows Update installation errors can possibly answer?

    The following table lists the error messages that you may receive when you try to install a software update. These errors may be caused by a deficiency of the system the system update readiness tool may be able to resolve. However, the tool may be unable to fix all instances in which these errors occur.

    0x8007370D

    ERROR_SXS_IDENTITY_PARSE_ERROR-

    An identity string is malformed.

    Microsoft Download Center

    You can download manually rates system update readiness tool from Microsoft Download Center. The current version of these tools are released in April 2009. The following files are available for download from the Microsoft Download Center:

    For all supported versions based on the x 86 Windows Server 2008 and Windows Vista

    Download Windows Vista and Windows Server 2008 for 32-bit systems package.

    (http://www.microsoft.com/downloads/details.aspx?FamilyID=0435684b-8d12-4028-9cb0-b2903257f1fd)

    For all supported versions based on the x 64 of Windows Server 2008 and Windows Vista

    Download Windows Vista and Windows Server 2008 for x 64-based systems package.

    (http://www.microsoft.com/downloads/details.aspx?FamilyID=b950e3b1-3267-41c2-8f10-1fe9a4bfa44d)

    More information is available here:
    http://support.Microsoft.com/kb/947821

    Please let us know if that helps.

    Chris
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • update of Windows, "Windows could not search for new updates", "mistake Found; WindowsUpdate_80080005 ".

    I try to run windows update and continue to receive the same message:

    "Windows could not search for new updates", "mistake Found; WindowsUpdate_80080005 ".

    When I try to display the windows Explorer update history shows only a white screen with an 'OK' button at the bottom right

    When I click 'OK' the screens of pointer, the computer works, but the screen remains blank until I have completed the task in the Task Manager.  I've updated from windows to the request automatically to the daily updates.  I get the same update for my Kodak printer, which is also a place for the wrong model.  This leads me to believe it was not working properly.

    any suggestions?

    I am running Kapersky "Antivirus 2009"

    OS: Windows Vista Home Basic

    My notes.

    0 x 80080005 implies that Microsoft Installer is not configured correctly or it may have malfunctioned.

    Run the Startup Repair tool by using the Windows Vista installation disc

    1. Insert the installation disc.
    Note: The computer must be configured to start from a CD or a DVD. For more information on the configuration of the computer to start from a CD or a DVD, see the documentation provided with your computer.

    2 restart the computer. To do this, click Start, click the arrow next to the lock button, and then click restart.
    Note: If you cannot restart the computer by using this method, use the power button to turn off the computer. Then, turn the computer back on.

    3. set your preferred language and then click Next.
    Note: In most cases, the Startup Repair process starts automatically, and you do not have to select in the System Recovery Options menu.

    4. click on repair your computer.

    5. in the System Recovery Options dialog box, click the operating system you want to repair, and then click Next.

    6. in the System Recovery Options menu, click Startup Repair to start the repair process.

    7. when the repair process is complete, click Finish.

    To run the Startup Repair tool if the computer has preinstalled recovery options

    Note: In most cases, the Startup Repair process starts automatically. Follow these steps only if the Startup Repair tool does not start automatically.

    8. remove all floppy disks, CDs and DVDs from the computer and restart the computer.

    9. follow one of these steps:

    (a) if the computer has a single operating system installed, press and hold the F8 key in restarting the computer. You must press the F8 key before the Windows logo appears. If the Windows logo appears, you must restart and try again.

    (b) if the computer has more than one operating system, use the arrow keys to select the operating system you want to repair. Then, press and hold F8.

    10. in the Advanced Startup Options, use the arrow keys to select repair your computerand press ENTER.

    11. click on a layout of keyboard in the list and then click Next.

    12. click on a user name in the list, enter the password and then click OK.

    13. in the System Recovery Options menu, click Startup Repair.

    14. when the repair process is completed, click Finish.

    TaurArian [MVP] 2005-2010 - Update Services

  • Windows could not search for new updates, error: 80070005, 80072F8F

    An erroe message appears when you try to download windows updates. I tried to use Microsoft difficulty It Center and it is said that repairs need to be made, it has been fixed, but the problem won't go away. Trying to submitt a request for assistance to Microsoft, but it is not available (?).  I was not able to download the updates of windows since 08/03/2012

    80072F8F

    Make sure that the date and including Internet Zone are correct on your computer.
    You may need to restart after the synchronization of time of your computer, etc..

    Windows Update error 80072f8f
    http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80072F8F

    Error message when you search for updates in Windows Vista: "Windows could not search for new updates (Code 80072F8F)".
    http://support.Microsoft.com/kb/929458

    Error 80070005

    http://support.Microsoft.com/kb/968003/
    Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update

    Error code 0 x 80070005 is also described as ACCESS DENIED (you may not to install updates). The other alternative is virus/malware.

  • Error code 80072EE2: Windows could not search for new updates.

    I am unable to get the Windows updates.  I repeatedly receive 80072EE2 error code: Windows could not search for new updates.  The help of instructions indicate I would add three updated addresses my firewall.  I am running McAfee Total Protection with a firewall, but I don't see an option to add addresses.  Do you have suggestions about this problem?

    Hello

    Did you face this problem after installation of McAfee?

    Follow these steps:

    Method 1: There is no option to add the URL of Web site in McAfee firewall.  However, you can add the URL in the filtered McAfee Web site. Click Parental control, clicking n config on the right panel, by clicking the forward button, and then click filtered Web sites on the left had Panel Add URL.

    Windows Update error 80072ee2
    http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80072EE2

    Method 2: Run the Fixit and check.
    The problem with Microsoft Windows Update is not working
    http://support.Microsoft.com/mats/windows_update/

     

    Method 3: If this does not help, you can temporarily disable the antivirus and check if that helps.
    Disable the antivirus software
    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  • Windows Vista could not search for new updates (error code 1 800700)

    original title: Windows Vista could not search for new updates

    Windows Vista could not search for new updates.
    800700 1 error code.
    My Antivirus software is Bitdefender.
    What should I do?

    How long it has been since the system enabled to update?

    Which version of Windows Vista (32-bit or 64-bit) and service pack (1 or 2) level.

    When the system has been changed swept with the suite of security/antivirus installed, no matter what has been detected? If so, what, please?

    Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  • Windows (Vista) could not search for new updates C800044E error code

    When I try to update windows Vista Home Premium I get: Windows could not search for new updates, error C800044E code.  I need help.  Herm

    Hello
     
    You can use the following methods that can help you solve your problem:
     
    Method 1: Try reseting component of Windows Update and verify that the problem, to do follow below the link which can help you to solve your problem:
    How to reset the Windows Update components?
     
    Method 2:
    Step 1:

    I suggest you to disable any program of security on your computer and check if it solves the problem.
    After reviewing the question you must reactivate the security on your computer program.
     
    Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.
     
    Step 2:
    I suggest that you put your computer in a clean boot, try to install the updates and check.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135 
     
    Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
  • Windows could not search for new updates after the troubleshooting and repair of updates

    My computer Windows 8 began to refuse to install windows updates.  I've been through the troubleshooting steps in Help and online.

    Now, what I mean is "Windows could not search for new updates", code 80073712.

    Troubleshooting Windows Update tool, solve problems as an administrator, gives:

    Error Windows Update Database that can be detected 0 x 80073712... Fixed.

    Windows Update components and need to be repaired... Fixed.

    I'm skeptical about the 'Fixed' part, because if you run it again... he finds and it 'fixed' the same problem.

    DISM.exe/online/Cleanup-image /Restorehealth and /scanhealth the two report error 14098: component store has been corrupted.

    Feel free to ask me questions to debug it, I'm fairly technical...

    Hello

    You can try this fix based on Windows PowerShell and see if that helps:

    http://www.kapilarya.com/fix-Windows-8-1-Unable-to-check-for-new-Windows-updates

    Hope this helps, good luck :)

  • Windows could not search for new updates-error code 80070422

    Windows could not search for new updates

    Error: code 80070422

    [Moved from the community centre of Participation]

    Hello

    Which Windows operating system work?

    Please refer to:

    http://Windows.Microsoft.com/en-in/Windows7/Windows-Update-error-80070422

  • Having a problem with the update of the window. He said that windows could not search for new updates. It's the found error 80245003 code

    Having a problem with the update of the window. He said that windows could not search for new updates. It's the found error 80245003 code

    Take a look at this article as it addresses this error code. Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • error code 80080005 'Windows could not search for new updates"

    error code 80080005 'Windows could not search for new updates"

    What operating system?

    http://support.Microsoft.com/kb/910337
    This error message is similar to the error message "error 5: access is denied." To resolve this problem, follow the steps described in the section "error 5: access is denied."

    This error indicates that access for FOREST permissions have been modified. To repair these access permissions, use one of the following methods, depending on the operating system.

    Windows XP

    1. Click Start, click run, type cmd, and then click OK.
    2. Type the following command and press ENTER:
      SC tisb strands D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
    3. Click Start, click run, type services.msc and click OK.
    4. Double-click on Background Intelligent Transfer Service.
    5. On the general tab, click Start.

    TaurArian [MVP] 2005-2010 - Update Services

  • Windows could not search for new updates (error 800F080D)

    original title: Windows could not search for new updates

    Errors found: Code 800F080D.  Could be anti-virus software related as it seemed to stop working when I performed an anti-virus scan.

    HI gdm21,

    Since you have questions, even the installation of system update readiness tool. There may be a corruption of the system which causes this error and updates to fail.

    Just ensure that you have run through this repair tool: http://support.microsoft.com/kb/929833

    Do you get errors when you run this?

Maybe you are looking for

  • M900 Lenovo Application Interface driver not checked

    I downloaded the SCCM for the M900 from the Lenovo Web site and all drivers install except for: Lenovo interface In computer device manager an error messsage "Code 52" and claims that the digital signature cannot be verified. I also downloaded the in

  • T440s brightness

    I recently purchased 8.1 T440s windows laptop and all of a sudden the brightness control has stopped working. The function keys do not work, and the brightness control panel does not work either. Is this a hardware or software problem? What should I

  • How to restore Windows Updates?

    RE this post, automatic updates of Windows 7 have broken my development environment and cost me some valuable development time! Friday afternoon, windows update did some updates during my lunch break, after which I was unable to debug applications at

  • graphics card for a laptop dv9000

    I have a card nvidia gforce 8600 m GS.  I am trying to run Dead Space.  I get a message that my graphics card does not meet the minimum requriements.  I looked up the requirements and I answered that the game asks for, but maybe not for the shading. 

  • router ea6200

    I just installed an ez6200 router everything is fine except in the list of dhcp reservation, it will only accept a known mac address entry. It keeps giving me "invalid mac address. I have the address printed from the printer that I want to book the a