Windows update will not work or let me start the update program, get the Windows Update error cannot currently get "some updates because this service does not work"
I moved and my computer is stuck off like 2 and a half months. Well, now I'm back on it, but for some reason any my Windows Update does not start. Whenever I go to him, he tells me that the program is not running and you may have to restart. I do and he said to me again and the same thing. So I went in my services to ensure that all programs, that depends on run works and he says even its operation. How can I fix it?
Hello Nick,
Here is a link where you can reset windows update components.
http://go.Microsoft.com/?linkid=9665683
Download the fix - it and run the fix - it.
Please select the mode option run aggressive.
Disable your anti-virus software.
Restart the computer and verify if you are able to install the updates.
Kind regards
Sumanth.B.S
Tags: Windows
Similar Questions
-
I try to install windows 2008 server std edition on HP DL 380 G5 server, I am getting error while installing "Windows could not update the Configuration to start the computer. Installation cannot continue. ", please suggest?
I tried also with HP smartstart CD, but failed.Thanks guys, I found the answer to my question, I used the last HP smart Start CD (V8.70B for windows 2008 server X 64) for DL380g5 for windows 2008 server STD, and it worked fine.
For the Smart Start CD list visit: http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=344318&lang=en&cc=nl&taskId=135&prodTypeId=18964&prodSeriesId=345557Thank you... -
Hello
I have a brand new Macbook pro and I bought the OEM System Builder of 64-bit Windows 8 driver in a store. My problem is that I have not only not able to install it using Boot Camp. At the end of the installation, a message appears with the following text "Windows could not update the configuration to start the computer. Installation cannot continue.
I'm not really a tech guy but I also tried to download virtual box and the same error comes back.
Can someone help me please?
Thank you!
Original title: Windows 8 64-bit English OEM System Builder
The thread is old now, but it is for those who always have this problem.
When I got the error, I cancelled and restarted the machine. I pressed the 'option' button when starting upwards and he grew the boot partitions. You should see a 'EFI Boot' partition. Choose that and you restart the installation process, but this time it works.
Supposedly the boot EFI and WinInstall partition should do the same thing. Manually, select one or the other.
-
Trying to move from XP to Vista Ultimate. During installation, the installation gets to 21% on the files and then closes and I get the error "Windows could not update the configuration to start the computer. Installation cannot continue. Can someone help me with this?
the problem has been fixed. I started on the dvd to see if I could install it outside of windows. I discovered that I could just install from windows. When I came out, I came across a repair button. Who find startup errors and fixed them. I then rebooted and went into windows and was able to install.
-
I started the OS from a backup hard drive. Now My Adobe products does not work. "licensing does not work for this product" error code 150:30. Help me please!
Reinstall the software correctly. Migration / backups do not work due to the specific requirements of the activation system.
Mylenium
-
InDesign doesn't let me place an eps file... gives an error "cannot place this file. No filter for the requested operation. »
This happens with a particular .eps file or many .eps files?
- The EPS files from Illustrator? What parameters are used when files are saved?
- Also this happens for all files created in Illustrator EPS (even one you create brand new, with just a few text and simple work in it).
- Where are stored the EPS files that you place in InDesign? If there is a form of corruption of files on the hard drive? (Maybe need repair file permissions?).
- If you work on a network: can the files when they are saved as EPS files on your hard drive?
CARI
-
Can I get some suggestions for this operating system, should I update to Windows Vista?
Upgrade the OS from Vista
I have a HP Pavilion dv6 laptop running Vista 64-bit. I thought to upgrade the operating system. Pourrait group Advisor reviews, etc. Update W7 is basically problem free? What a W7 install from scratch? Thanks to you all!Hello
If you have Vista 64 bit you must upgrade to Windows 7 64 bit.
Before purchasing Windows 7, follow these steps:
Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.
If this is not available, Windows 7 will not properly work for you.
Run the "Windows 7 Upgrade Advisor.
http://www.Microsoft.com/en-US/Download/details.aspx?ID=20
Check if your specifications are compatible for Windows 7:
"Windows 7 system requirements"
http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements
"Windows 7 Compatibility Center" for software and hardware:
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx
Windows 7 upgrade paths:
http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx
And the Microsoft Store where you can get an idea of the price of Windows 7:
http://www.microsoftstore.com/store/msstore/en_US/list/CategoryID.50726100
For any other questions about the installation of Windows 7, please ask in the Forum Installation of Windows 7:
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install?tab=all
See you soon.
-
I have a Sony Vaio VGN-NW235F and I am a student in the it field. A lot of my software are not supported by Windows 7. So I upgraded my Windows 7 Home Premium to Windows 7 Professional so that I can run Virtual PC. But I'm not able to run due to the above error...
Please kindly help me
Thanking you,
Paths
Salvation of the paths,
Looks like you are trying to get XP Mode configured, that will install a virtual machine for you to run your legacy programs. This feature is available in the professional versions, full and Enterprise edition - so your property in this aspect.
You get this error message because you do not have the chip installed for hardware - assisted virtualization technology and it's good. you don't need more. Click on this link http://www.microsoft.com/windows/virtual-pc/download.aspx and select your language and edition. Then scroll down to step 3. You must download and run the third component called Windows XP Mode Update. This update will remove the requirement that you have the chip mentioned above.
That should do the trick.
Barbara
-
Windows xp: services do not start the access denied error 5 or error 1068
Original title: windows xp: service does not start
win xp: none of my important services like firewall, DHCP or the server does not start. Everyone says error 5 access denied or error 1068 could not start dependencies... Please help
Hello
1. do you have security software installed on the computer?
Try the methods provided below and check if the problem persists.
Method 1:
I suggest that you disable the security software and then try to start the service and check if the problem persists.
Note:
Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Method 2:
You will also need to start long-term services and check if that helps.
To view service dependencies, click the link below.
Method 3:
Check if the computer isn't on selective startup.
How to configure Windows to use a Normal startup state
Configure Windows XP to start normally.
(a) click Startand then click run.
(b) type msconfigand click OK.
The System Configuration utility dialog box appears.(c) click on the general tab, click Normal Startup - load all device drivers and services, and then click OK.
(d) when you are prompted, click restart to restart the computer.
-
I try to start the old T2150CDT - error message "not found reading drive C of the sector.
Hello
I came by one of them and trying to fire, but I get the message, "sector not found reading drive C". I get this message just after windows 98 logo appears.
Problem is that I am limited in what I can do, because I don't have a floppy drive and back does not recognize the CD drive (missing drivers); Although I can hear it when starting upwards.
So I out the HARD drive and pasted the installation windows 98 inside files. then tried to reinstall, but I still have the message of "sector not found reading drive C". The drive is too large (it's about 2.1 GB.)
Install the right drivers for the CD Rom would allow me to install from a CD?
It works usually
Thank you
JohnAs far as I know the error message; "Sector not found reading drive C" appears because of these three reasons:
-physical HARD drive failure
-corrupted HARD drive file system
-Bad RAMIn the first case, you should try to format the whole HARD drive and should try to install the new OS.
If it will not help, chances are that HARD drive is malfunctioning and needs to be replaced. -
vWorkspace 8 - VDI Windows 7 "Error cannot connect to the server '.
Hello
We are soon about to begin the deployment of our vWorkspace VDI solution. We have Windows 7 Client s connection to Win 7 Pro 32 Bit VM on Hyper-V.
Sometimes when the user intiates a connection to the desktop of Windows 7 VDI published the vWorkspace Client launch and are trying to connect, and then an error will be presented "Error cannot connect to the server. We do not understand all the time and it is random.
Go it is addressed urgently as it's going to cause some major headaches with our users.
Someone at - it ideas?
Cool, thanks Dan.
I'll find the case of Mike and send the info from there.
-
Oracle 11 GR 1 material on Windows Xp error cannot find J2SE SDK installed to the path
When I type in the path to java.exe in SQL dev., I got error ' cannot find J2SE SDK installed to the path: C:\Program Files\Java\jre6. "when I entered the path C:\Program Files\Java\jre6\bin\java. What is the reason for this error? How can I fix it? Installation of the database say it was successfulDeveloper SQL must the JDK Java JRE not to operate successfully. Your path looks like a path for the JRE. There is a download of windows that comes with the Java developer kit.
concerning
Niall
-
I get a message "Printer Spooler service does not.
My printer was printing not and does not seem to be installed any longer so I uninstalled the program. I am reinstal it and me "Spooler error message" I then went online to get info on how to take care of this error, but spent three days without result. Can anyone give me feedback on how to fix this error, so I can reinstall my printer?
Hi dlbma.
To start the print spooler service
Click Start--->run---> type "Services.msc" without the quotes and click on 'OK'. And on the page that has ensued, scroll down to the "Print spooler" service. Right-click on it and select 'Properties'. Click the Start button in the "Service status" box and in the box "Startup type" , select ' automatic. . Click 'OK' and 'OK'.
I hope this helps.
-
I have a PC with Windows XP SP3... ecentlped recognizing my DVD/CDRW. I tried to download Windows Fixit and when I tried to run, I get the error code 0 x 80092003. -What this means and how can I solve this problem?
HP Pavilion a1410n PC with Windows XP Media Center edition. Sony Optiarc cddvdRW.
Hi J Mbanza,
-What is the link that you used to download the fix tool from?
error 0 x 80092003 which is an error reading or writing to a file.
Try to download from the link below and check.
Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsThank you!
-
I don't know what is COM Surrogate. It lights up just on the screen and I don't know why! He just tells me to install important updates, what I've done.
Hi Carolina,.
According to Alexander in this thread of TechNet:"COM Surrogate (dllhost.exe) is an application that is often used by Windows Explorer to isolate themselves from codecs (if explore would be the codecs in its own process, it would crash as it did in XP, so explore generates dllhost to actually treat the miniatures, etc outside its process space)."There are a few things that people have done to solve the problem.1. If you have Nero or Roxio Easy CD Creator installed, try to uninstall it to see if this problem is still happening.' 2 ' Kiifer ' reported that checking the "Always show icons" option in folder options seems to have solved their problem.Click Start > click computer > press the Alt key to bring up the menu option Tools > click on options files > click the View tab > check the box for always show icons, never thumbnails. This is the first check box under files and folders.Please keep us updated.
Maybe you are looking for
-
I noticed that when I'm on Firefox 3.6.28, try to look for something, not looking but sometimes opens directly the most appropriate result. It's amazing and really fast. Why this feature is not included in the latest version.Thank you
-
Winlogon.exe guard popping up saying 'No disc' there is no disk in the drive. Insert a disc into drive K. I won't record anything. It keeps popping up when I want to stop and he let me close. And it won't go away. I tried the Task Manager, and who is
-
upgrade to Windows 7 64 bit Ultimate Edition with the new installation of windows XP
I plan to upgrade to Windows 7 64 bit Ultimate Edition with the new installation of windows XP my PC configuration is like below: Card mother Intel DH61WWProcessor Core I3 2100 3.1 Ghz4 GB OF DDR3 RAMSeagate 1 TB SATA HARD driveOS: Microsoft Windows
-
Computer laptop shutdown during recovery
Help, I have a toshiba laptop with windows vista it applied final configurations during the recovery mode and it stop because I forgot to plug my charger. Now when I take f8 I see everything in addition to the recovery mode and my laptop runs in regi
-
C3180 always prints a test page to the power on
Everytime I turn on my Photosmart C3180 prints a test alignment page. How can I stop this?