Windows updates fails with the error code 'E '.

Similar Questions

• Windows updates failed with the error 646

  Original title: your important updates failed?

  I had a bunch of updates fail! 1 opf updates has a 646 error code how can I fix these problems? A large number of updates failed have to do with office 2007 and office 2010? Help! I don't know if it will get a faster response or not, but these are the numbers on the 1 who failed to update this morning KB951550 KB951944, 967642, SP-2-they keep repeating the same numbers approximately 4 times that say failed?

  Hello

  You can try to download and install the updates manually and check if that helps. To download them manually open the link given give the articles below and download the correct version of the update for your computer and install.

  http://www.Microsoft.com/downloads/en/default.aspx

  Before manually installing updates, configure your computer to clean up state of startup and then continue the process. How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once you have finished installing the updates, follow step 7 in the article to start on normal startup.

  Updates related to Microsoft Office, you can follow the suggestion given in the article below.

  http://support.Microsoft.com/kb/2258121

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Update fails with the error 'WindowsUpdate_0000057E '.

  I have windows vista, but my microsoft office is 2002.

  For the latest updates of the week 2 windows keep failing.
  1 security Update for Microsoft Excel 2002 (KB959988)
  2. Update for Office XP (KB933388)

  Whenever the update fails, I get the error "WindowsUpdate_0000057E".

  I'm not good with computers and need help on how to fix this...
  

  

  When you try to download an ActiveX control, install an update to Windows or to a Windows component, install a service pack for Windows or to a Windows component, or install a Microsoft or third-party software, you may experience one or more of the following symptoms:

  • You may receive the following error message when you try to install a program or update:
    Digital signature not found
    The Microsoft digital signature affirms that software has been tested with Windows and that the software has not been changed since then, it has been tested.
    The software you are about to install does not contain a Microsoft digital signature. There is therefore no guarantee that this software works correctly with Windows.
    Package name
    If you want to search for Microsoft digitally software signed, refer to the Windows Update Web site at http://windowsupdate.microsoft.com to see if one is available.
    Do you want to continue the installation?

    If you click Details, you receive the following message is displayed:

    Microsoft Windows
    The signature on the software package you want to install is not valid. The package is not signed correctly.

    After you click OK in the first error message dialog box, you may receive a message that States that the installation was successful, or you may receive the following error message:

    Name of the Update Package
    The cryptographic operation failed due to a local security option setting.
  • When you try to install an update or to install a service pack, you may receive an error message that is similar to one of the following:
    • Name of the Update Package
  
  The Setup program could not verify the integrity of the file Update.inf. Make sure the cryptographic service is running on this computer.
• Failed to install catalog files.
• The software you are installing has not passed Windows Logo testing to verify its compatibility with Windows XP. (Tell me why this testing is important).

  This software will not be installed. Contact your system administrator.

• The software you are installing has not passed Windows Logo testing to verify its compatibility with this version of Windows. (Tell me why this testing is important).
• When you try to install a service pack Windows XP, you may receive an error message similar to the following:
  Service Pack 1 Setup could not verify the integrity of the file. Make sure the cryptographic service is running on this computer
• When you try to install Microsoft Data Access Components (MDAC) 2.8, you may receive an error message similar to the following:
  «"" "INF. cause installation failure: the timestamp signature and/or certificate could not be verified or is incorrect.»»»"
• The %WINDIR%\System32\CatRoot2\Edb.log may reach 20 megabytes (MB) even though the file is typically less than 1 MB.
• When you try to install a package from the Windows Update Web site or the Microsoft Update Web site, you may receive a message that is similar to the following:
  The software has not passed Windows logo testing and will not be installed.
• When you examine the file % systemroot%\Windowsupdate.log, you should see an entry for one of the following errors:
  • 0 x 80096001
  • 0 x 80096005
  • 0 x 80096010
  • 0x800B0001
  • 0x800B0003
  • 0x800B0004
  • 0x800B0109
  • 0x8007F0DA
  • 0x8007f01e
• When you use Microsoft windows update on a Windows XP-based computer, the update process may fail and you may receive an error message "0x8007f007". This can happen regardless of what type of update you select.

The Svcpack.log file may contain entries that are similar to the following:

937.406: GetCatVersion: failed to retrieve version information from C:\WINDOWS\system32 \CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\Tmp.0.scw.cat with error 0 x 57 937.437: GetCatVersion: failed to retrieve the version information of C:\WINDOWS\Tmp.0.scw.cat with error 0 x 80092004 940.344: InstallSingleCatalogFile: failure failed for Tmp.0.scw.cat; error = 0xfffffbfe. 940.344: DoInstallation failed failed: STR_CATALOG_INSTALL_FAILED 955.125: UnRegisterSpuninstForRecovery, failed to delete SpRecoverCmdLine, 0 error value x 2 955.125: DoInstallation: has no cancellation of registration of spuninst.exe for recovery. 962.656: cancel registration of uninstall-> Windows Server 2003 Service Pack, 0 962.656: impossible to install catalog files. 1448.406: message displayed to the user: cannot install catalog files. 1448.406: user Input: OK 1448.406: Update.exe extended error code = 0xf01e 1448.406: Update.exe return code was masked to 0 x 643 for MSI custom action compliance.
Back to top

CAUSE

This problem may occur if one or more of the following conditions are met: Log...
This problem may occur if one or more of the following conditions are met:
• Log file or database corruption exists in the folder % Systemroot%\System32\Catroot2.
• Cryptographic services is set to disabled.
• Other Windows files are corrupted or missing.
• The timestamp signature or the certificate cannot be verified, or is incorrect.
• The hidden attribute is set to the folder %windir%, or one of its subfolders.
• No unsigned installation behavior group policy setting (Windows 2000 only) is set to do not allow installation or warn, but allow installationor the policy of binary value is not set to 0 in the following registry key:
  The HKEY_LOCAL_MACHINE\Software\Microsoft\Non-Driver signing
• The group policy enable trusted publisher lockdown setting is turned on, and you do not have the appropriate certificate in your trusted publishers certificate store. This group policy setting is under User Configuration, under Windows settings, Internet Explorer Maintenance, under Security, under Authenticode settings in the Group Policy MMC snap-in.
• You install Internet Explorer 6 SP1 and the update of security 823559 (MS03-023) is installed. For more information about this issue, click on the number below to view the article in the Microsoft Knowledge Base:
  828031 (http://support.microsoft.com/kb/828031/) error "the software you are installing has not passed Windows Logo testing...". "message when you try to install Internet Explorer 6 Service Pack 1
• The software distribution folder is corrupted.
Back to top

RESOLUTION

To resolve this problem, use the following methods. Once you perform the operations...
To resolve this problem, use the following methods. After completing the steps in each method, check to see if the issue is resolved before you go to the next method. If the problem is resolved by any method, you do not have to use other methods.

Back to top

Method 1: Rename the Edb.log file rename the Edb.log file, and then try again to install the program. To rename the Edb.log file, follow these steps:

1. Click Start, click run, type cmd in the Open box, and then OK.

   Note On a Windows Vista-based computer, click Start, type cmd in the box to search for text and right click on cmd.exe, and then click run as administrator.

2. At the command prompt, type the following command and press ENTER:
   Ren %systemroot%\system32\catroot2\Edb.log *.tst

Back to top

Method 2: Set the Services of cryptography on AutoSet to automatic Cryptographic Services and then try again to install the program. To set the cryptographic on AutoServices, follow these steps:

1. Start the Administrative Tools utility in control Panel.
2. Double-click Services.
3. Click Cryptographic Services, and then click Properties.
4. Click Automatic for Startup type, and then click Start.

Note Windows 2000 does not list Cryptographic Services in the SERVICES Administration utility.

Back to top

Method 3: Rename the folder Catroot2 rename the Catroot2 (Windows XP and Windows Server 2003 only) folder and then try to install the program again.

Note Skip this method if the operating system is Windows 2000.

To rename the Catroot2 folder, follow these steps:

1. Click Start, click run, type cmd, and then click OK.
2. At the command prompt, type the following commands and press ENTER after each line:
   net stop cryptsvc
   Ren %systemroot%\System32\Catroot2 oldcatroot2
   net start cryptsvc
   output
3. Remove all tmp*.cat to the following folder:
   % systemroot%\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}

   If any of the files that begin with tmp exist in this folder, do not remove any other files. Files .cat in this folder are necessary for installing hotfixes and service packs.

Important Do not rename the folder C:\windows\system32\catroot. The Catroot2 folder is automatically recreated by Windows, but the C:\windows\system32\catroot folder is not recreated if is renamed the folder C:\windows\system32\catroot.

Back to top

Method 4: Reregister DLL files that are associated with Cryptographic Services for files .dll registry that are associated with Cryptographic Services, follow these steps:

1. Click Start, click run, type cmd in the Open box, and then OK.

   Note On a Windows Vista-based computer, click Start, type cmd in the Search box and right-click on cmd.exe, and then click run as administrator.

2. At the command prompt, type the following commands and press ENTER after each command:
   regsvr32 /u softpub.dll
   regsvr32 /u wintrust.dll
   regsvr32 /u initpki.dll
   regsvr32 /u dssenh.dll
   regsvr32 /u rsaenh.dll
   regsvr32 /u gpkcsp.dll
   regsvr32 /u sccbase.dll
   regsvr32 /u slbcsp.dll
   regsvr32 /u mssip32.dll
   regsvr32 /u cryptdlg.dll
   output

   Note If you are prompted, click OK .

   Note Microsoft Windows 2000 does not include the Sccbase.dll file. If you are running a version of Windows 2000, omit the Sccbase.dll file.

3. Restart your computer.
4. Click Start, click run, type cmd in the Open box, and then click OK.
5. At the command prompt, type the following commands and press ENTER after each command:
   regsvr32 softpub.dll
   regsvr32 wintrust.dll
   regsvr32 initpki.dll
   regsvr32 dssenh.dll
   regsvr32 rsaenh.dll
   regsvr32 gpkcsp.dll
   regsvr32 sccbase.dll
   regsvr32 slbcsp.dll
   regsvr32 mssip32.dll
   regsvr32 cryptdlg.dll
   output

   Note If you are prompted, click OK .

   Note Microsoft Windows 2000 does not include the Sccbase.dll file. If you are running a version of Windows 2000, omit the Sccbase.dll file.

6. Restart the computer.
Back to top

Method 5: Remove the hidden %windir%\System32 and its subfolders attribute

1. Click Start, click run, type cmd in the Open box, and then OK.

   Note On a Windows Vista-based computer, click Start, type cmd in the Search box and right-click on cmd.exe, and then click run as administrator.

2. At the command prompt, type the following commands, pressing ENTER after each line:
   attrib s h % windir %
   attrib s h %windir%\system32
   attrib s h %windir%\system32\catroot2

output
Back to top

Method 6: Set a strategy without driver signature silently succeed if you are running a version of Windows 2000, set the silent success no unsigned installation behavior group policy setting. This group policy setting located under Computer Configuration, under Windows settings, under security settings, under local policies, under Security Options in the Group Policy MMC snap-in. If you are running Windows XP or a later version of Windows, this group policy setting is no longer supported. In this case, follow these steps to resolve this problem:

1. Click Start, click run, type regedit, and then click OK.

   Note On a Windows Vista-based computer, click Start, type regedit in the Search box and click on regedit.exe, and then click run as administrator.

2. Locate and then click the following key in the registry:
   The HKEY_LOCAL_MACHINE\Software\Microsoft\Non-Driver signing
3. Right-click on the Policy binary value, and then click change.
4. The value data will appear in the following format:
   0000 02

   Press DELETE to remove the current value (02 in this example), and then type 0 (the current value will now appear as 00).

5. Click OK, and then quit the registry editor.
Back to top

Method 7: Temporarily turn off Trusted Publishers Lockdown and install the certificates to your trusted publishers certificate store you can continue to use the group policy enable trusted publisher lockdown setting, but you must first add the certificates in your trusted publishers certificate store. To do this, disable the group policy enable trusted publisher lockdown setting, install the certificates in your certificate and then trusted publishers store on the setting of group policy enable trusted publisher lockdown again. To install the certificate suitable for Microsoft Windows and Microsoft Internet Explorer updates, follow these steps:

1. Download the product of Microsoft update you want to install from the Microsoft Download Center, the Windows Update Catalog or the Microsoft Update Catalog. For more information about how to download updates from Microsoft Download Center, click the number below to view the article in the Microsoft Knowledge Base:
   119591 (http://support.microsoft.com/kb/119591/) how to obtain technical support files from Online Services Microsoft

   For more information about how to download updates from the Windows Update Catalog, click on the number below to view the article in the Microsoft Knowledge Base:

323166 (http://support.microsoft.com/kb/323166/) how to download updates that include drivers and hotfixes from the Windows Update Catalog
• Extract the package to update product in a temporary folder. The command line that you use to do this depends on the update that you are trying to install. View the Microsoft Knowledge Base article associated with the update to determine the command line switches appropriate that you will use to extract the package. For example, to extract the 824146 security for Windows XP update to the C:\824146 folder, run Windowsxp-kb824146 - x 86 - enu - x: c: \824146. To extract the 828750 security for Windows XP update to the C:\828750 folder, run q828750.exe/c t:c:\828750.
• Right click on the file KBNumber.cat to the package to update product to the temporary folder you created in step 2, and then click Properties.

  Note The KBNumber.cat file may be in a subfolder. For example, the file may be in the C:\824146\sp1\update folder or in the C:\824146\sp2\update folder.

• On the Digital Signatures tab, click the digital signature and then click Details.
• Click view certificate, and then click install Certificate.
• Click Next to start the Certificate Import Wizard.
• Click place all certificates in the following store, and then click Browse.
• Click approved publishers, and then click OK.
• Click Next, click Finish, and then click OK.
Back to top

Method 8: Check the status of all certificates in the certification path and import missing certificates or damaged from another computer to verify certificates in the path of certificate for a Windows or Internet Explorer product update, follow these steps: step 1: Verify Microsoft certificates

1. In Internet Explorer, click on Toolsand then click Internet Options.
2. On the content tab, click certificates.
3. Certificate authorities roots of trust tab, double-click Microsoft Root Authority. If this certificate is missing, go to step 2.
4. On the general tab, make sure that the dates valid from are 10/01/1997 to 12/31/2020.
5. Under the Certificate path tab, verify that this certificate is OK appears under certificate status.
6. Click OKand then double-click the NO LIABILITY ACCEPTED certificate.
7. On the general tab, make sure that the dates valid from are 11/05/1997 to 01/07/2004.
8. On the Certificate path tab, check whether the certificate has expired or is not yet valid or this certificate is OK appears under certificate status.

   Note Although this certificate is expired, the certificate will continue to work. The operating system may not work properly if the certificate is missing or revoked. For more information, click on the number below to view the article in the Microsoft Knowledge Base:

   293781 (http://support.microsoft.com/kb/293781/) Trusted certificate root that are required by Windows 2000, Windows XP and Windows Server 2003
9. Click OKand then double-click the GTE CyberTrust Root certificate. You can have more than one of these certificates with the same name. Check the certificate that has an expiration date of 02/23/2006.
10. On the general tab, make sure that the dates valid from are "23/02/1996-02/23/2006."
11. Under the Certificate path tab, verify that this certificate is OK appears under certificate status.

    Note Although this certificate is expired, the certificate will continue to work. The operating system may not work properly if the certificate is missing or revoked. For more information, click on the number below to view the article in the Microsoft Knowledge Base:

293781 (http://support.microsoft.com/kb/293781/) Trusted certificate root that are required by Windows 2000, Windows XP and Windows Server 2003
• Click OK, and then double-click Thawte Timestamping CA.
• On the general tab, make sure that the dates valid from are "31/12/1996 to 12/31/2020."
• Under the Certificate path tab, verify that this certificate is OK appears under certificate status.

Step 2: Import the missing certificates or damaged if one or more of these certificates are missing or corrupted, export the missing certificates or damaged on another computer, and then install the certificates on your computer. To export certificates to another computer, follow these steps:

1. In Internet Explorer, click on Toolsand then click Internet Options.
2. On the content tab, click certificates.
3. Certificate authorities roots of trust tab, click the certificate you want to export.
4. Click export, and then follow the instructions to export the certificate as a DER encoded Binary x.509 (.) REB) file.
5. Once the certificate file has been exported, copy it to the computer where you want to import.
6. On the computer where you want to import the certificate, double-click the certificate.
7. Click install Certificate, and then click Next.
8. Click Finish, and then click OK.
Back to top

Method 9: Clear the temporary file and restart the hotfix installation or the installation of the service pack Note Skip this method if the operating system is Windows 2000.

To clear the temporary file and restart the hotfix installation or the service pack installation, follow these steps:

1. Remove all tmp*.cat of the following folders:

   systemroot\system32\CatRoot\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}

   systemroot\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}

2. Delete all the kb*.cat files in the following folders:
   % systemroot%\System32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}
   % systemroot%\System32\CatRoot\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}
3. Remove all the oem *. * files in the % systemroot %\inf folder.
4. At the command prompt, type the following commands. Press ENTER after each command.
   net stop cryptsvc
   Ren %systemroot%\System32\Catroot2 oldcatroot2
   net start cryptsvc
   output
5. Restart the installation of the patch failed or the installation of the service pack.
Back to top

Method 10: Empty the software distribution folder

1. Click Start, click run, type services.msc and click OK.

Note On a Windows Vista-based computer, click Start, type services.msc in the Search box, click services.mscand then click run as administrator.

• In the Services (Local) pane, click automatic updates, and then click stop.
• Reduce the Services (local) window.
• Select all the contents of the Windows distribution folder, and then delete them.

  Note By default, the Windows distribution folder is located in the folder drive: \Windows\SoftwareDistribution. In this place, the drive is a placeholder for the drive where Windows is installed.

• Make sure that the Windows distribution folder is empty and enlarge the Services (local) window.
• In the Services (Local) pane, click automatic updates, and then click Start.
• Restart the computer, and then run Windows Update again.
Back to top

Method 11: Perform an upgrade on site for more information about how to perform an upgrade on the spot, click on the number below to view the article in the Microsoft Knowledge Base:

315341 (http://support.microsoft.com/kb/315341/) how to perform an upgrade on the spot (reinstallation) of Windows XP
Back to top

MORE INFORMATION

For more information about a resolution that is intended for Windows 2000 only.
For more information about a resolution that is intended for Windows 2000 only, click on the number below to view the article in the Microsoft Knowledge Base:
281458 (http://support.microsoft.com/kb/281458/) error message when you install a service pack Windows 2000 or product update
This problem has been reported to occur with the following updates:
328310 (http://support.microsoft.com/kb/328310/) MS02-071: a failure in management of Windows WM_TIMER messages may allow elevation of privileges
810565 (http://support.microsoft.com/kb/810565/) of the hyperlinks open in Internet Explorer instead of in default browser or Help and Support Center
327979 (http://support.microsoft.com/kb/327979/) game stops responding (hangs) or when the introductory video is played
322011 (http://support.microsoft.com/kb/322011/) you cannot preview a fax in the Fax Console
811630 (http://support.microsoft.com/kb/811630/) HTML Help update to limit functionality when it is invoked with the window.showHelp method)
810577 (http://support.microsoft.com/kb/810577/) MS03-005: a buffer uncontrolled in the Windows Redirector may allow elevation of privileges
329441 (http://support.microsoft.com/kb/329441/) you cannot create a network connection after you restore Windows XP
329170 (http://support.microsoft.com/kb/329170/) MS02-070: a flaw in SMB signing may permit group policy to change
810833 (http://support.microsoft.com/kb/810833/) MS03-001: buffer uncontrolled in the Locator service may allow code to run
For more information about configuring automatic updates in Windows XP, click on the number below to view the article in the Microsoft Knowledge Base:
306525 (http://support.microsoft.com/kb/306525/) how to configure and use automatic updates in Windows XP

Best regards, Sohail Patel "MCSE 2003 | ITILv3 | "A journey of a thousand miles begins with a first step."

• KB204121, KB2656405 and KB2690729 updates fail with the error Code 641

  Original title: updates in case of failure

  I have a LAN House 12 computer.  Three of the compters have Vista Home Premium (32-bit) with Service Pack 3.  These updates fail: KB2604111, KB204121, KB2656405 and KB2690729.  On one, KB2596672 also fails.  Code 641 is displayed as the failure code.  I ran Fixit, and he says that the problem is resolved, but it is not.  I also have the error message that Setup are not accessible. I can't uninstall any program, or install any program.  Windows Defender updates of work. MyOther computers with Windows XP and Windows 7 are not problems with the update.

  What is the solution?

  See my colleague Maurice RESPONSE message in this thread-online http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/error-code-641-and-code-80070641/f6fd8e12-e83a-457b-af0a-ae54a09b71b5

  If still no joy, contact System Mechanic (iolo.com) support for assistance - they are well aware of the problem caused implementation.

  Good luck!

• KB915597 updates fail with the error code 80090006

  I have problems with the latest windows updates do not KB915597with 80090006 error code... I tried all of the troubleshooting suggestion recommended but nothing does... I use vista 32 bit...

  Hello

  1. What is the exact error message?

  Run the fix it tool in the following article and check.
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Also read the following article which can be useful:
  How to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation
  http://support.Microsoft.com/kb/906602

• Monitor HP updates fail with the error code 80070005

  I get a message that not load my updates of the screen.  This has been a problem going on since

  the purchase of this pc and installation of the monitor.

  In addition, I can't run my Bernina on Vista software.  Do I need to buy special software to do this?

  Hello Sharon sews,

  The error that you are experiencing with your monitor is an update of the HP driver for the monitor. It is not a Microsoft Update.
  See the post on the HP support forum: follow the cutting edge of technology and should help with your problem.
  http://h30434.www3.HP.com/T5/monitors-and-video/update-error-code-80070005/m-p/11754

  Regarding the issue with your Bernina problem, it is probably not compatible with Windows Vista.
  You can try the following:

  If the program is not compatible, then you try to install and run the program in compatibility mode.

  Use the following steps:

  (1) right click on the program

  2) click Properties

  3) click on the Compatibility tab

  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  You can also try to do a right-click on the setup.exe or .msi file and choose "run as administrator.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Patch updates fail with the error Code 3

  I tried to understand this one for months, but I work in the it Department and we have available creative cloud to our creative team. A particular Mac user, who uses a connection to Active Directory, but is a local administrator on their computers, has had this same problem for months, and I wonder what can be done to address this problem.

  Whenever an application is installed, it fails to patch. I get an error Code 3 and an individual application cannot be updated. Error Code 3 seems rare because I have not really seen anyone refer to it anywhere on the web. In any case, I already tried the follow-up:

  • Uninstalled/Reinstalled, with or without the cleaning tool
  • Change permissions on specific folders, as well as the entire system disk
  • A ran repair disk and authorization
  • My own creative cloud compiled and installed package
  • Created a new CC account for the user in question

  .. .the all of these "fixes" nothing helps.

  It should also be noted that this particular user has been given first of all a new hard drive with a new installation of Mac OS X Yosemite and now an other machine. The same behavior continues to poison us. This is crazy!

  And whenever I try to set up a chat on-line with Adobe support, wait and wait, only to be expelled leaves a session before it had even begun. It's the equivalent of getting hung up on the phone after waiting on hold for an extended period of time. It's horrible. I really need to solve this problem. All the research I did rush to the same steps to try to remedy the situation, but nothing does. Please, please, please give me something I can work with that.

  Thank you
  Alex S.

  Hello

  That you have made many of the troubleshooting steps, I recommend you to contact customer service

  Kind regards

  Sheena

• Update fails with the error 'Code 80246007"of the update and update error 'Code 8000FFFF '.

  Update for Windows Vista gives error "Code 80246007" update and error 'Code 8000FFFF' installation of Internet Explorer 8 for Windows Vista & security Cumulative Update for Internet Explorer 7 for Windows Vista (KB976325)

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  =================

  Error when you download updates using Windows Update or Microsoft Update: 8000FFFF
  http://support.Microsoft.com/kb/946414

  When you try to install the updates on the Windows Update Web site or the Microsoft Update Web site, you may receive a "0 x 80246007" error code
  http://support.Microsoft.com/kb/958042

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Why the driver update fails with the error code 800705 b 4 when I try to install the latest video driver for my Dell vostro Intel computer laptop?

  Windows Update tries to update the Intel driver newly released my laptop Dell Vostro 3750.
  I get error code 800705 b 4 every time.
  Any ideas as to the cause?
  I get system freezes lately and want to make sure I have the latest drivers for all my hardware before contacting Dell technical support.

  Thank you.

  Robert.

  Also, check your windows update settings and provide recommended updates is not selected for the automatic update, but only the important updates.

  Aside from not not using drivers available under recommended updates, for all other first check the details as to whether its relevant for your specific use.

• KB2699988 update fails with the error code 800719E4:

  After you install the update, I click to restart the computer.   He gets that ' Configuration of updates: phase 2 3 41% complete "and then stops.  The machine is never to the extent of the turn and turn it back on.  I have to turn off the power.  Have already run a repair of windows update and the clean boot

  Hello

  1 did you do changes on the computer before the show?

  Method 1: I suggest you to follow the steps below and check if it helps:

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997

  Warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)
  How to back up and restore the registry in Windows

  And take note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Method 2: Install the update manually from the link below.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30079

  Check if you can install the update from Windows.

  Hope this information is useful.

• Windows updates fail with no error code

  I reinstalled Windows as suggested, and it seems that updates are now mode as it should. I wish you to know how the virus was picked up. All my computers have the latest updates of security products.

  Thank you for your help in this matter.

  I wish you to know how the virus was picked up...

  By your computer previous on the same wire, most likely because you do not have to completely remove the preinstalled Norton free version of evaluation BEFORE you upgrade Windows XP to Vista AND you installed McAfee Antivirus Plus AND BEFORE that you have installed the Vista updates everything (including the Service Packs & IE upgrades).

  Chances are that the McAfee application ever installed or worked properly.

• kb2686509 updated Microsoft fails with the error code Ox8007FOF4

  original title: microsoft updates fails with the error code Ox8007FOF4

  My automatic microsoft update fails, I tried the manul update that also fails, I get an answer of (kb2686509) and an Ox8007FOF4 error code is their someone out there with an awnser

  http://support.Microsoft.com/kb/958051

• KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

  KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

  Whenever I run this update, it seems that it installs about 90% of the way but then stops and breaks down about 20 seconds later.  If someone else sees this problem and is at - it a solution?  I'm running Vista Home Premium SP2 and KB2183461 is listed as a critical update for my system.  Help?

  Preliminary stage: If the Tea Timer of Spybot is enabled, please disabled until we finished this thread. Seehttp://aumha.net/viewtopic.php?f=26&t=32409

  Tip: If you don't fully understand what Tea Timer does and how it does, leave it disabled permanently.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  McAfee applications (and Norton) are known for not not upgrade (or uninstall) "clean". If you have McAfee Security Center installed since you bought the computer, he is been updated (automatically) several times. Try the following:

  1. run this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  2. after reinstallation of McAfee Security Center to step #3 patch triple, manually & repeatedly updated McAfee Security Center until you get one invite "no updates more".

  3. OPTIONAL: If you have had problems with IE8, open IE8 (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  4. OPTIONAL STEP: Open IE8 (only) to http://support.microsoft.com/kb/971058 & run the difficulty by DEFAULT inside and modes and AGGRESSIVE. [1]

  5 restart and test by launching a manual check of updates & see if KB2183461 now installs. See...

  How will I know if my computer is up to date?
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-can-I-tell-if-my-computer-is-up-to-date

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or updates installed (Vista & Win7).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• All security updates fail with the error A 80071, 91 code

  Hello!

  System information: Windows 7 Ultimate 64-bit, i7-720QM, 6 GB RAM, 256 GB SSD, ATI 4670 [Dell Studio XPS 1645]

  Background:

  • UAC was arrested. Turn on UAC stop my gadgets to work [another thread on these forums...].
  • A week ago, I got speech recognition works only with a local edition. Insert this ctfmon '=' CTFMON registry entry. EXE, to HKLM\Software\Microsoft\Windows\CurrentVersion\Run, fixed the problem. However, I can't find to this registry entry.
  • Four days ago, I had slow internet speed. I did a 'Complete' Microsoft Security Essentials scan and it found many exploits (Explot: Java/CVE-2009-3867.) BX, TrojanDownloader / OpenConnection.AK, TrojranDownloader:Java / Rexec.c and a dozen others). I removed all the. The internet speed is back to normal.
  • This morning, I have updated the firmware on my SSD to activate the TRIM. I restored an image of the drive I did with Windows Backup and Restore just before updating the drive.

  Problem:

  • I tried Windows Update after update of the SSD. It downloads all updates, installs, and prompts you to restart the computer to complete the installation. During the shutdown, some files are 'configured '. Upon restart, during the boot of Windows GUI (circles of flight), there is a break-up of the code, something about the registry. On logon, it gets "35%" and says so "returning default configuration updates,' or something like that. I get a notification indicating that the updates failed.
  • On Windows Update, only Silverlight, Windows malicious software removal, MSE definition updated and updated Office Publisher are successful.
  • All other updates (security updates, cumulative updates, security updates for IE, updates for Windows) fail with the error code A 80071, 91.
  • If you are looking for updates that fail, here they are: KB2416400, KB2296199, KB2305420, KB2385678, KB2423089, KB24236673, KB2442962, KB246759 and KB2443685.

  What I tried:

  • Disk Cleanup attempt (and unfortunately removed all restore points). Did not work.
  • Attempt to sfc/scannow. He found a few files, that it could not correct; I have the CBS.log newspaper if you need. However, updates still do not work.
  • Tried to reset the resource manager to file with "fsutil resource setautotest true c:\ ». She is successful. However, after the restart, the updates still do not work.
  • Tried a Full scan with MSE. No anomaly.
  • Tried to reset components to update Windows (using the Vista Fix - It via KB971058). Updates still do not work.
  • Attempt of Microsoft Malicious Software Removal Tool (updated dec 2010) Full Scan, no malicious software was detected. Updates still do not work.
  • Attempt of Anti-Malware analysis complete Malwarebyte, no malicious software found. Updates still do not work.

  I don't think that this is malware, but a Windows problem... My internet is wobbly for these last two days, a lot of packet loss (pages only "" half load, some missing frames, etc.). Not sure if this is related, but it downloads the updates very well. It is not always the marker "35%".

  I'm out of ideas. What's next?

  Thank you

  ~ Ibrahim ~.

  1. about 1 year, I installed MSE.

  2 McAfee has been preloaded; the subscription was updated (in a 90-day trial), and I uninstalled McAfee completely (regular uninstall and Removal Tool provided by McAfee).

  3. Yes, for about 30 minutes before I uninstalled and installed MSE.

  4. Yes.

  However, with a little help seven forums, we have figured out it is the registry. I did a reinstall and then the updates installed correctly.

  Thanks for the help, if! :)

• Download works 9 KB2092914 security update and it fails with the error code 646

  Update of security for Works 9, KB2092914, downlaod fails with the error code 646

  See this thread:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/0c397230-26c6-4214-a5d1-3c99d2b2ef47

  Please let us know if that helps.