Windows updates for vista sp2 fail to install

Similar Questions

• Is no longer, I can download and install the updates for Vista SP2. I get error 80070490

  Original title: Windows of Vista SP2 update fails.  Vista Upgrade option grayed out

  Is no longer, I can download and install the updates for Vista SP2.  I get error 80070490, who reports that Vista Service Pack 1 is no longer up-to-date.  I downloaded and installed the "System Update Readiness Tool" without change in error.  Repair Vista with DVD does not give me the upgrade option.  My SP-2 is corrupt?  Vista Service Pack 2 also went out of support?

  Kind regards

  Ed S.

  Hello

  Method 1:

  Follow the steps in troubleshooting section and check if that helps.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  http://support.Microsoft.com/kb/958044

  Method 2:

  You can also read this article and check if it helps.

  How to uninstall Windows Vista service packs as a troubleshooting step

  http://support.Microsoft.com/kb/948537

• Important updates for Vista SP2 Security Installation failure: update MSXML 4.0 SP2 (KB927978) AND (KB954430) security, citing error Code 652, Windows Update encountered an unknown error!

  Has no significant updates for VISTA SP2 security installation: MSXML 4.0 SP2 (KB927978) security AND (KB954430), citing error Code 652, Windows Update encountered an unknown error! How is it Windows Update does not recognize it's own mistakes? I tried several times to install both of these important updates without success. Please help me so that I can install these two updates & get back on the right track. Thank you!

  See the section "How to get help", for example, http://support.microsoft.com/kb/927978

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

  KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

  Whenever I run this update, it seems that it installs about 90% of the way but then stops and breaks down about 20 seconds later.  If someone else sees this problem and is at - it a solution?  I'm running Vista Home Premium SP2 and KB2183461 is listed as a critical update for my system.  Help?

  Preliminary stage: If the Tea Timer of Spybot is enabled, please disabled until we finished this thread. Seehttp://aumha.net/viewtopic.php?f=26&t=32409

  Tip: If you don't fully understand what Tea Timer does and how it does, leave it disabled permanently.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  McAfee applications (and Norton) are known for not not upgrade (or uninstall) "clean". If you have McAfee Security Center installed since you bought the computer, he is been updated (automatically) several times. Try the following:

  1. run this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  2. after reinstallation of McAfee Security Center to step #3 patch triple, manually & repeatedly updated McAfee Security Center until you get one invite "no updates more".

  3. OPTIONAL: If you have had problems with IE8, open IE8 (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  4. OPTIONAL STEP: Open IE8 (only) to http://support.microsoft.com/kb/971058 & run the difficulty by DEFAULT inside and modes and AGGRESSIVE. [1]

  5 restart and test by launching a manual check of updates & see if KB2183461 now installs. See...

  How will I know if my computer is up to date?
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-can-I-tell-if-my-computer-is-up-to-date

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or updates installed (Vista & Win7).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• No Windows Update for Vista

  I tried everything I know and I can't get Windows Update for Vista.  I tried Fixit, F8 during restart, but without success.

  Hello

  You don't tell us if you get the error codes or not.

  You need SP2 must be installed to support still available for Vista.

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  See you soon.

• error code 80070673 for windows update for vista

  error code 80070673 for windows update for vista

  Hello Jwisetoyo,

  Thank you for your message.  Please click HERE for a possible solution to your problem.

  See you soon

  Jason H. Engineer Support of Microsoft answers visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot use Windows Update - KB982132 and KB972270 fail to install, error 0x800A0007

  I can't using Windows Update for two 'critical updates of security". I got anumber of error messages, but the last was 0x800A0007. This is nowhere on their support pages. Can someone suggest a possible solution?  (If I can solve this problem, I can get IE9 fixing.) With the help of Windows XP Edition family

  The two KB982132 and KB972270 updates failed to install (twice) with error message that appears now is no longer on the 0x8007001F support page.

  Since that time when I get to "check your computer for Updates" page fails to display and code error 0x800A0007, which also appears nowhere.

  Norton Internet Security Firewall is disabled and the Windows Firewall is enabled.

  Thank you-

  Do not uninstall IE8 or IE7 before doing a repair installation leaves the two Internet Explorer and Windows in a "confused" or "broken" State - so your Windows Update (if any) problems.

  I'm sorry to tell you that your only recourse now formats the hard drive & then by doing a new installation of Windows. [1]

  Follow the instructions in this post of mine in another forum (to-the-letter & in order! ) to restore your computer to a State safe & functional: http://aumha.net/viewtopic.php?f=62&t=44636

  If you need additional help with the clean install, please start your own, new topic in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

  Note: The computer must NOT be connected to the internet or local networks (i.e. other computers) in its current state. All your personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.

  Wish I had better news for you.  Good luck!

  =======================================================
  [1] PS: I learned that the hard way, too, many years ago!

• Window update for Vista didn't and now it stops when I use all the features.

  I did my update for Vista window and now it stops when I use all the features. I use Google Chrome and the recent update adds Bing Bar.

  Hi Izzy2222,

  ·         Did you put any power on the computer plan option?

  I recommend to open Event Viewer and find the exact description of the error. The newspaper of errors in your next post relay.

  See also: What are the information contained in the logs of the event (Event Viewer)?

  In the meantime, follow the suggestions below for a possible solution:

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Let us know the results.

• Update for Vista SP2 is no longer available after system recovery

  original title: EversinceI has made a recovery system 28/05/2011 back to Vista Service Pack 1, I see not aprompt on Windows update for Service Pack 2.  Why

  I did a system restore on 28/05/2011 back to factory default to Vista Service Pack 1.  Since then, when I go into windows update, the update does not prompt to update me to Service Pack 2.  Why.

  Windows Vista and Windows Server 2008 service Pack is not available for installation via Windows Update
  http://support.Microsoft.com/kb/948343

• 800736B 2 of error Code woes. Windows Update (Vista SP2) fails to install a bunch of updates

  I know that this problem was posted a lot everywhere on the internet (even here), but I would like to explain a little better than everyone else and maybe I can somehow get to the bottom of this.

  The problem:

  I am trying to update my acer 4/5 years, grandfathers aspire running Windows Vista. Whenever I try to install the following updates:

  http://i.imgur.com/SBxv8.jpg

  I get 6 updates installation failed with error code 800736B 2. When I turn the computer off, he pretended to go through the process of 'completion' facilities update 6 (you know what I mean, it says after that windows has disconnected the user is installing updates). It takes about 15 minutes, then when I re - turn on the computer and check the updates again the exact same updates are always listed.

  The attempts of a solution:

  I downloaded and used the update tool for Windows Vista (http://support.microsoft.com/kb/947821) system. It shows the exact symptoms of the same as the rest of the updates. It "installs" (which lasts about an hour. Said it was successful. Then I restart the computer, it 'full' Update 1 on 1 which have been installed, when I opened the tool (after reboot), it says that I have to reinstall the same update (KB947821). So obviously it cannot be installed but for some reason any thought that he didn't.

  I also tried to run this tool in safe mode and had an error that says that I can't run it in safe mode. Sweet.

  I wanted to download the updates manually (I was hoping that they would be in the form of some .exe or something) then run their safe mode, since you can't use windows update in safe mode. I looked around online a lot, but could not find a way to download the updates manually. I found a bunch of guides tell me how to do, but non of them work. My guess is that they removed the support for it.

  If anyone has any ideas as to what I can do without having to reinstall windows it would be awesome. My grandfather is really exhausted all of this current vista installation so wipe everying is probably a bad idea. I would like to avoid it at all costs.

  Hello

  You can try the steps in this KB http://support.microsoft.com/kb/883825 for a similar error, but others indicated that they were able to solve this problem by using the KB.

  See also: the problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• Windows Vista SP2 fails to install and Windows Firewall will not stay

  Hello, I have problems with Vista 64-bit, it will not install service pack 2 and Windows Firewall will not stay. I tried to manually enable ICF manually and it won't turn. It gave me error 6x9D. I ran several antivirus scans malware byte and pc cleaner pro 2012 and the issue has not been resolved. If I could get help would be much appreciated. Thank you

  Hello

  What do you use for security?

  If you are using an Internet Security Suite, it will have its own firewall and disables the default Windows Firewall.

  And you should have only one firewall to avoid problems related to the operating system.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You have not installed SP1?

  If so, try a direct download of SP2.

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  And if you have any problems:

  There is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  See you soon.

• Windows Update for Vista (KB2286198) _

  Everything from the lates Windows Update has been installeded for Vista (KB2286198)

  I was not able to use my card to air with the Cradlepoint router.  The computer can see the router but only connect with local and non-local and internet access.  If I plug the modem from Verizon in the computer USB it will not work.  I have uninstall-ed the update and it works again with the Cradlepoint wireless modem.  Then, the update automatically installs again and I have the same problem.  What can I do to fix this?

  First, uninstall again and then search for updates and it should appear.  Right-click on it to hide, and it will not be downloaded or installed or appear again (but you can still get in case of need if she and him to download and install-, but I wouldn't do that).  You will need to put it to manual and not automatic selection to do this.  So, try the following:

  Try to download and install manually by download on your desktop and install them one by one. Insert the number of KB to get updates on the right and choose the one corresponding to your version of Vista: http://www.microsoft.com/downloads/en/default.aspx.

  If this does not work, try a boot minimum http://support.microsoft.com/kb/929135 and disable your security software.  See if the installation works. However, once don't forget to put Vista in normal status, as described in the procedures. If that does not work, uninstall it again.

  Also read and execute the steps ofhttp://support.microsoft.com/kb/971058.

  If this does not help, please transfer your question in Forum Windows Update:http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where updates experts will be happy to help you.  Please post with the information requested here:what to post in the Windows Update forum

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Update for Vista (KB973917) fails

  Update for Windows Vista for systems x 64 (KB973917) does not maintain install.  Error code is 8E5E0147.  Could not find this error code.  When I try to install by choosing to install updates and turns off, bad computer stops and asks for the safe or normal mode on restart.  In addition, video and streaming is now slow. Don't know if that is related, but audio and video are very mismatched.

  DESCRIPTION OF THE UPDATE BELOW:

  Download size: 3.9 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  Install this update to help strengthen authentication information in specific scenarios. After you install this item, you may have to restart your computer.

  More information:
  http://go.Microsoft.com/fwlink/?LinkId=177727

  Help and Support:
  http://support.Microsoft.com

  Hi KJPFHS,

  The error you get when installing the update could be due to the incomplete file download. The size of the file you mentioned is 3.9 MB, but the actual file size is 4.1 MB.

  Then, download the complete file from the link given below and install it. Follow the link given below to download the file.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=982be99c-646f-41c9-a9cc-8f30a1b1444f&displaylang=en

  Before installing the update, put the computer to boot. Follow the link given below to put the computer to boot. Later, once the installation is complete, put the computer to normal startup follow step 7 in the given article below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Update for Vista family 32-bit premium does not update all. 57th error and sku011.cab for office 2003. Malicious tool not updated. Stays on the list was updated even after having managed States.

  Office 2003 sp3 do not install in windows update. It is a 108.2 MB file, no kb #. Under 2 other 2003 office updates. KB977713 for office outlook and for office 2003 update kb907417. 57F error message comes out after having failed in windows update. Sku011.cab missing error comes just after process fails at the end of the attempt to update for the updated 2003 3 office. Tool kb890830 in windows update to install malicious but indicates successful when finished. Returns to windows update to install. All other above mentioned updates show missed.

  Thanks for your time,

  Vincent Ciaramella

  The malicious software removal tool does not use an installer. As a general rule, when you run the malicious software removal tool, it creates a temporary directory named at random on the root of the drive of the computer. This directory contains several files, and it includes the Mrtstub.exe file. Most of the time, this folder is automatically deleted after the tool to the end of execution or the next time that you start the computer. However, this folder may not always be automatically deleted. In these cases, you can manually delete this file, and this has no adverse effect on the computer.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  With regard to the Office updates:

  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyId=1B0BFB35-C252-43CC-8A2A-6A64D6AC4670 seems to be an update very old "update for Office 2003 (KB907417)"

  With regard to the http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=da24d44b-4d6e-4bcd-b7cd-ca56bf6c0ba7
  Update for the junk e-mail in Outlook 2003 (KB977713) filter

  Have you tried manually download KB977713 and install the same.

  Sometimes, however, it still doesn't work: full-file version update may request Office source files
  http://support.Microsoft.com/kb/840169

  TaurArian [MVP] 2005-2010 - Update Services

• I do not have the new GUI Windows Update for Vista

  My friends computer which has Vista: Home Premium SP1 has the new graphical interface of Windows Update.  I have Vista: Home Premium SP2, how do I do not have the new GUI interface?

  -Mike

  :

  Hi Gamemaster406,

  Welcome to Microsoft Windows Vista Forums.

  Until we start trying to solve your problem, please provide additional information, so that we can better help you. Please, give us a brief description of your problem with the computer.

  O how long you have been faced with this problem?

  O that you make changes to the computer recently?

  O are not able to see the latest version of windows you updates?

  Ø you aren't able to see the windows graphical user interface update settings?

  Each computer is different and you could look at the history of the update between the two computers and see if you are missing the other windows updates.

  To learn more information access Windows Update the link below:

  http://www.Microsoft.com/Windows/downloads/windowsupdate/learn/windowsvista.mspx

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

  Hope this information is useful.

  Suresh G

  Support Microsoft Answers

  Visit our Microsoft answers feedback Forum and let us know what you think.