Windows updates not working not not on windows vista

I tried page Web of Dalai to http://wu.krelay.de/en and follow the steps to download and install KB3177725 I even changed the settings for windows update to automatically check updates (recommended) to never check updates (not recommended). The download was successful but it never installed and now the stand-alone Installer sought updates for 10 hours. Updates only my computer have installed is the one for August 2016.

The last update that was installed KB890830 and there are 20 of them with the same number for malicious software removal tool, and they were installed on twenty dates between July 13, 2016-August 8, 2016 and each installed successfully.

How to stop a service: http://www.sevenforums.com/tutorials/2495-services-start-disable.html

Tags: Windows

Similar Questions

  • Windows Update stopped working after the reactivation of Vista Ultimate 32 bit

    Cloned hard drive bigger and replaced hard drive in your laptop. Everything worked fine until I was invited to reactivate Windows Vista Ultimate (32 bit), I did over the phone. Now, Windows Update does not work - service is not active. Is this a known issue? Any suggestions to fix would be appreciated. Ran Malewarebytes, Turned off update automatic and then restarted (suggested in a forum), and tried to fix with installation disc, none of them worked again.

    Five other updates have been installed with Windows Update Standalone install (an is not necessary for my system). This a better option than update mode without failure. Windows Update works now again.

  • Windows updates not working do not AT ALL

    Five days ago, that I had to reinstall the Vista operating system. When I tried to install Microsoft office, I discovered that I need Vista SP1.  That's when I realized that all the attempts over the past five days updates had 'no.'  In the last hour, I worked with Microsoft technology by CAT on this issue and were made to do a scan of the sfc. Sfc scan window told me that I had a system repair pending that requires a reboot. I did the reset, but the sfc scan keeps giving the same message. I don't know if this is related to the inability of my computer up to date. (This all came trying to install Microsoft Office, which requires Vista SP1. Reinstall drive was apparently without SP1.  Any ideas?   (I just spent more than 25 hours get 2 rootkit virus diagnosed and removed - so the need to reinstall my operating system)

    Hello

    ·         Was there no error message or error code where it says that facilities, updates have failed?

    Method 1:

    You can try to put the computer in a clean boot state and try to install the updates and check if the third-party application interferes with the installation process. To configure your computer to clean boot follow the link below.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

    Method 2:

    If this does not help, you can try to reset the component of Windows Update and check if it helps to update the computer.

    http://support.Microsoft.com/kb/971058

    Method 3:

    You can also run the tool system the below data article and check if this is useful to solve the problem.

    http://support.Microsoft.com/kb/947821

    Hope this information is useful.

    Amrita M

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • My Windows Update not more? My software update did not work for months?

    My Windows Update is not more?  My software update did not work for months ?

    Hi Jacc,

    1. What is the question you are faced with Windows updates?

    2. you get any error message?

    3. you are facing problems during updates or install updates?

    4. what software update you speak?

    5 have had any changes made to the computer before the show?

    Please follow the steps from the link and check that it works very well.

    Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

    http://support.Microsoft.com/kb/2509997/en-us

    Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    How to back up and restore the registry in Windows

    http://support.Microsoft.com/kb/322756

  • my wireless does not work when I download the update for Windows Vista (KB2753842) security

    After an automatic download of Windows security update my wireless card did not work. He could not find a wireless networks that she normally

    the fact. When I used a LAN cable I internet connection.
    When I did a system restore to exclude the update of Windows my wireless card security worked perfectly.
    The same thing has just happened and once again had to do a system restore to get a wireless internet network connection. I can only assume that the Windows Security Update for Windows Vista (KB2753842) is the problem.
    Please indicate if this update is critical and if this is the case, what can I do to make sure my wireless card working?
    Thank you.
    Roy

    Thank you very much for your answer.

    I have now solved the problem by using the network connection software to diagnose and repair the problem. My wireless network now works with the update in question.

    Kind regards

    Roy.

    Hi royhorrobin,

    Please report the problem to the Microsoft Community Forum.
    We will help you solve the problem.
     
    1. What is the brand and model of the computer?
    2. do you get an error message?
     
     
    We would like to tell you that this is a critical update...
    Find information here:

    Here are some steps that you can follow:
     
    Method 1:
    Step 1: Restore the system to the United Nations-isntall the software update.
    Refer
    What is system restore?
     
    Step 2: Put the computer to boot, with warning...
    From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
    Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135
     
    Step 3: Download and install the update manually to the clean boot.

    Method 2:

    Try to update the Wireless driver and check to see if the same problem happens.

    a. click on start
    b. right click on computer
    c. click Properties
    d. click on Device Manager on the left hand side

    e. in the list of hardware categories, find the device you want to update, and then double-click the device name.
    f. click on the driver tab, click Update driver and then follow the instructions. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    For more information, see:


    Method 3:
    Also, try the steps from the link below:
     
    Hope above methods solves the problem. If the problem persists, you can write back to us and we will be happy to help you further.
  • Windows Update not working 641 code

    I'm having a problem with the installation of windows updates. I get code 641. I tried to find solutions on the internet, but nothing has worked. I have Vista x 64 sp2 installed. I looked in the services that are running and installed windows is not listed. My last windows update which worked was on 11/04/2012. Thanks to all who can help.

    Not, in my opinion, no.

  • My automatic updates Windows Vista do not work? Error: Windows can't check for updates

    original title: My automatic Windows Vista updates do not work?

    My automatic updates Windows Vista do not work? There is no error code, it just says "Windows can't check for updates.

    I tried to use the fix from microsoft, it would join in the other responses, but it did not work.

    And have you tried resolution: method 2 in http://support.microsoft.com/kb/946414?

  • Windows Vista cannot be updated because the service does not work!

    Windows Vista will not update because it says that the service is not running.  He said I might have to restart the computer.

    I tried several reboots the computer.

    I tried to get into the services and manually stop and restart the service.  Nothing seems to work.

    I'm downloading the SP2 for Vista, let's see if that fixes the problem.

    Any help?

    How to reset the Windows Update settings?
    http://support.Microsoft.com/kb/971058

  • Windows Vista freezing, problems starting mode safe mode, Windows Update does not work, etc.

    Hi all. I am operating Windows Vista Home Premium Service Pack 1, 32-bit on an HP Pavilion dv6000.

    My problems started about two months ago, when I installed several updates through Windows Update. I started having problems with my USB ports (even if these pilots were not being updated) and the computer was never able to close successfully. I tried to uninstall these updates, but that did not fix the questions I had. I have also installed software (AutoCAD 2007) at the same time and uninstalled, nothing helps.

    Then my computer started to freeze after running for a few minutes. Time seems to vary from 5 minutes of good use for 1 hour, but I found that it works only because this so long, I only open a program or file and use it all the time (for example, reading a book in Adobe Acrobat format). If I try to open the program or additional files, go to control panel, etc. (read: if I do everything related to Windows Explorer) the computer crashes. I can still move my cursor but none of the windows meet, and I can't ctrl + alt + delete to enter the Task Manager (I get a black screen).

    I was manually shut down my computer every time that happens and boot in SafeMode several times. Sometimes when I try to start safe mode it is hampering the crcdisk file and turns off. It happens not every time, however. Sometimes, when it starts it running the disk check, and there has been some index files that it has been deleted and orphaned files that it has been moved.

    I tried to do a system restore to a point before the updates I've installed in October, but my computer has no points system, restore even if he says it was their creation before you install these updates.

    The last problem is that when I go to Windows Update, it says that I have never checked for or downloaded the updates in the 15 months that I've had the computer - is not true, I, he lost at the time of all the record of it. So although I would like to provide you with wonderful with a record of what I've updated and people uninstalled, I can't because all this information is gone. In addition, I can't connect to the internet to try to check the news updates, because our internet service runs a USB modem, which is not communicating properly with my computer.

    I hope someone has an idea of what's going on. I just can't understand the common point that all these questions arise, my technology skills are somewhat limited, so I hope for a relatively easy solution.

    Sarah

    BTW, all my files were backed up on external drives.

    I don't know Jack about computers, but I don't know that I went through almost exactly the same thing.  My pc was ok, then in a month or two, it took a nose dive.  something I did was too that much could not think of everything.  A friend told me to reset my bios to default settings and see what happens.  After having spent only 7 hours trying to teach myself on bios, I got stabbed in this area and it worked.  Everything is great runnng.  Now I can even right click on icons without crashing.

  • Windows Vista Ultimate - Windows Explorer does not work after a critical update.

    I greeted Windows install a critical update.  Since then, I have a program that I run at startup that does not start.  I tried to restore to a point before the update, but Windows Explorer guard stop and restart, then I can't navigate to the backup and restore Vista application.  I can't access the backup and restore in Mode safe either.  I tried to launch the Vista installation disc, to try to repair Windows, but I have the same problem with Windows Explorer (stop and restart).  Is it possible to repair Windows Explorer? or is there a solution?

    Hello Robsew,

    Try this...

    http://support.Microsoft.com/kb/318378

    You may have to reinstall or repair Internet Explorer in Windows Vista and Windows XP if you have problems with Internet Explorer because of damaged files or lack of registration data. You can also decide to reinstall or repair Internet Explorer 6 to resolve problems with Outlook Express in Windows XP.

    Methods to follow for Internet Explorer 7 or Internet Explorer 8 method 1: reset Internet Explorer settings if you have Internet Explorer 7 or Internet Explorer 8 is installed, you can repair damaged files or missing information of registration in Internet Explore 7 or Internet Explorer 8. To do this, follow these steps:

    1. Start Internet Explorer.
    2. On the Tools menu, click Internet Options.
    3. On the Advanced tab, click reset.
    4. In the Reset Internet Explorer settings dialog, click reset to confirm.

    Method 2: Reinstall Internet Explorer 7 or Internet Explorer 8 to download and reinstall Internet Explorer 7 for Windows XP, visit the following Microsoft Download Center Web site:

    http://www.Microsoft.com/downloads/details.aspx?FamilyId=9AE91EBE-3385-447C-8A30-081805B2F90B (http://www.microsoft.com/downloads/details.aspx?FamilyId=9AE91EBE-3385-447C-8A30-081805B2F90B)

    To download and reinstall Internet Explorer 8 for Windows XP, visit the following Microsoft Download Center Web site:

    http://www.Microsoft.com/Windows/Internet-Explorer/?OCID=ie8_s_ad7fa1d4-a75b-4df7-ad63-f581977282a8 (http://www.microsoft.com/windows/internet-explorer/?ocid=ie8_s_ad7fa1d4-a75b-4df7-ad63-f581977282a8)

    Good day...!

    Best regards, Sohail Patel "MCSE 2003 | ITILv3 | "A journey of a thousand miles begins with a first step."

  • Windows Update does not work on Windows Vista

    Dear Sir/Madam,

    For a few days Windows Update has been advising me to download the following updates:

    KB3060005

    3159398

    3161561

    3161664

    3161949

    3164033

    3164035

    3162835

    890830

    This was not possible, despite leaving the computer for hours. It remains at 0% overall. I have windows vista Home premium (32 bit). I wonder if someone could help me solve this problem?

    Thank you for your time.

    Please try the following: KB3168965 install manually.

    https://support.Microsoft.com/en-us/KB/3168965

    Set never 'Find updates' automatic updates and restart before installing.

    Best regards, VZ

  • Windows Vista updates offline works do not error indicating download / check updates for w60 glb

    I use Windows vista Business. When I used the package of updates offline to wsusoffline.net and run the program. I get the error download/check updates for w60 glb. Kindly help how to solve this problem. I'm not a computer engineer or software engineer. as a result, help me

    It is a forum for specific consumers.

    Post here instead-online http://social.technet.microsoft.com/Forums/en/category/windowsvistaitpro

  • My Windows Vista downloads of updates and then said: I have to restart the computer for the updates to day work, but when I do the updates do not work at all and the computer has trouble again restart.

    Cannot update Windows Vista, with the update functionality.

    Hey Charley,

    Welcome to the Microsoft Community and thanks for posting the question.

    According to the description, you can not install Windows updates.

    This problem can occur because of inconsistencies in Windows Update.

    Perform the steps from the link below and see if it helps.

    Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

    Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

    For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 (http://support.microsoft.com/kb/322756/( )

    Warning of Chkdsk.

    Important: When running chkdsk on the drive if bad sectors are found on the hard drive, then chkdsk attempts to repair this sector. If no data is available while data may be lost.

    Hope this information helps.

    Answer to us if you have problems with Windows Update or any other issue of Windows, and we would be happy to help you.

    Good day!

  • Windows VISTA BIT missing Modules! Updates to the installer will not work.

    MY windows progam (and several other installation programs) will not work.  I went down to the BITS service does not.  I found several remedies that include restarting or re-configuration of the service.  However, when I try to start to change the service in the Control Panel, I get a message that the modules of BITS are not!  Can my BITS have been removed?

    Note: I had my living room PC to eliminate an infection particularly bad virud - perhaps they removed too?

    Pavillian Mediacenter HP with Windows Vista Edition Home Premium (x 32)

    Thank you, DRC

    Hi DCassie,

    1. Have you tried the 940520 full KB?

    If you have not completed the Ko 940520 try the full article and check if it works.

    If the article does not help then to recover a corrupt service, you will need to perform the repair installation of Windows vista and the Windows vista disc, you cannot perform repair installation.

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Error 1053 and error 1068, I have no sound, No Security, Windows Update does not work, Windows Media Player doesn't work, restore the system no. said Volume Shadow Copy 0 x 81000202, please someone help me, Windows Vista Home Premium 32-bit

    My system does not work properly.  Something has closed most of my Windows programs.  How it happened and why I don't know.  I can not do that more with Microsoft.  First it was XP, Vista now.  It's like as soon as Windows 7 is out Microsoft has launched programs to destroy Windows Vista.  I have to deal with that now.  Please if anyone sees this and can help, please help me!

    Hello eco123eco,

    1. click on Start, click principally made programs, Accessories, right-click on command promptand select run as administrator.

    2. click on continue or provide credentials admin if prompted.

    3. in the command prompt window type the following, sfc/scannow (yes he's a space after sfc), and then press ENTER. This analysis may take some time to complete.

    Hope this helps you. Let us know anyway. Make it a great day!

    "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

Maybe you are looking for

  • Microsoft (C) Register Server has stopped working

    The error message "Microsoft (C) Register Server has stopped working" prevents me from opening any browser or my main console of Trendmico on my account administrstor of PC to the home address but strangely no this problem doesn't exist in the accoun

  • HDD SMART virus on my HP PC and lost my tab ACCESSORIES and restoration of the system.

    I have Vista pre-installed on my PC HP - has caught the virus in HDD SMART 2008, but it was removed. Now, I do my tab ACCESSORIES more and no longer have a point system - restore is just not there!  I get error code 08x004230F - something about a sha

  • WAG320n to WRT610n connection helps WET610n bridge ethernet

    I have upgraded my network with a modem/router WAG320n and have a (ethernet bridge) WET610n in my room remotely.  Because the WET is just a single port, I would like to connect my old WRT610n router to bridge, but need to know the right settings and

  • How can hack WIFI password?

    I have arround WLAN, but I can't acess them. Each of them are secured / password protected. in this case how can hack the WLAN?

  • HP G62 Notebook PC: HP G62 fan questions

    Hey there! I am the owner of relatively satisfied a HP G62 laptop, which is between three and four years. I'm very happy with it, but the fan was strange for months and he has now got so bad that I decided to do something. Whenever I turn it on after