Windows virus scan stops PC for his protection.

Similar Questions

• y at - it a fix for 'windows explore has stopped working ".

  y at - it a fix for 'windows explore has stopped working ".

  Hi Emmanuel,.

  ·         When you get this error message?

  ·         You did any computer change?

  ·         When was it last works well?

  We have no fix to correct the error, because Windows Explorer may stop responding for several reasons such as the file system, third-party software conflicts, corruption etc. So, be aware of what caused Windows Explorer to stop working and based on that the next steps could be useful.

  Try the following

  Method 1:

  Step 1:

  Check in safe mode see you facing same problem

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  Check in the clean boot process

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: follow step 7 to place the computer on its usual way, once completed troubleshooting

  Method 2:

  Follow the steps posted by THE C following the link below;

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/how-to-fix-Windows-Explorer-has-stopped/25ff3ac6-0442-434B-B699-4feb659c82c4

  Reply back with the results

• whenever I click on 'control panel' or 'computer', it displays "windows Explorer has stopped working". It does not display the display of the control panel.

  Whenever I want to check computer (memory) space available on each drive, click on the 'computer' logo, it does not display the response on the screen. Instead, it displays a screen with a message "Windows Explorer has stopped working" for a few minutes and then returns to the original display.  I get the same answer, whenever I click on the "control panel" logo  I need advice how to solve this problem. Thank you.

  Hello

  Did you change your computer?

  I suggest you follow the link (this also applies to windows vista)

  Explorer Windows stopped working

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

• Fax for Windows & scan has stopped working for me.

  Fax for Windows & scan has stopped working for me. I analyze the documents on there all the time and it just stopped working gives me an error message indicating "a problem prevented the document under analysis. Please try again, or to correct this information, see Help and Support or the documentation that came with the scanner. "However, the problem is not the scanner, because it works with a colleague's computer, and the scanner does not work with mine either. It is a problem with the Windows fax and scan. We have tried several things and nothing works. Help, please!

  Hi KristinVeltema,

  To resolve this problem, you must download and install windows vista service pack 2 on the computer.

  Learn how to install Windows Vista Service Pack 2 (SP2)

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  See the link below for more information:

  
  Error message when you try to import an image from a scanner by using "Windows Fax and Scan" or by using the Windows Photo Gallery in Windows Vista SP1: "a problem prevented the document under analysis.

  http://support.Microsoft.com/kb/953253

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows XP code Stop 0x0000007B (0xF78AE524, 0xC000000E, 0x00000000, 0x00000000) the machine does not start in safe mode or give me a command prompt to run a chkdsk or virus scan, what should I do?

  I have Windows XP on another system.  When we started, we had a blue screen with the above error codes.  I tried to restart and boot into safe mode and safe mode with command prompt, but right after that I chose the option of start, blue screen error reappears with this code.  How can I get the machine to start so I can run a virus scan or restore?

  a google search showed this article http://support.microsoft.com/kb/324103

  You can try to boot in the recovery of a XP cd console.

• «Get the message at startup...» "Host process for Windows Services has stopped"... and sometimes losing his

  I started getting a message every time I boot my laptop Compaq Presario CQ60. Message is "host process for Windows Services has stopped". My speaked symbol now has a red cross I've ever had before. When it turns off I often have not all sounds. I have a feeling that this has happened after an automatic update. I did a system restore, but this does not solve the problem. It's the sound that is most annoying that I never know when or where I will not have it. I hope someone can help

  To clarify, the two problems was started at the same time?

  Try to perform a clean boot in an attempt to determine the cause of the error at startup:
  http://support.Microsoft.com/kb/929135

  Try reinstalling the latest audio drivers available on the manufacturer's website.
  Also, try the other steps listed here: http://windows.microsoft.com/en-US/windows/help/no-sound-in-windows

• Downloaded and paid of Minecraft and having problems with Java, Anti Virus Scan and Windows Update - error code 800F081F

  Downloaded and paid of Minecraft and having problems with Java, Anti Virus Scan and Windows Update - error code 800F081F

  Would you advice, thank you.

  Hi Hugo,.

  1. what anti-virus software you have installed in the computer?

  2. What is the full error message/code?

  3. the issue occurred after you install Minecraft?

  4. are you able to play Minecraft without any problem?

  5. what happens with Antivirus and Java?

  Windows Update can occur if one or more of the following conditions are met:

  1. the Windows Update database is damaged.

  2. antivirus software is configured to scan the %Windir%\SoftwareDistribution folder.

  3. the service (BITS) Background Intelligent Transfer Service does not receive a content link header.

  4. a required system file is incorrectly registered.

  5. Windows Installer has encountered an error.

  6. the manifesto of component maintenance (EC) is damaged.

  7. the Windows Update service has stopped during the installation.

  8. a version of the file conflict exists with Windows Update agent files.

  Please follow the steps described in the methods to solve the problem:

  Method 1: We will try the steps from the following link and check the result:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058?WA=wsignin1.0

  Method 2:

  To correct the errors that occur when you use Windows Update, install, and run the system update readiness tool. The tool analyzes inconsistencies on your computer and fixes as its current installation.

  You can view the following link to download the system update readiness tool and check:

  System tool update that corrects problems of Windows Update is available for Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  http://support.Microsoft.com/kb/947821

  Details of the event log to find what caused the Antivirus and Java to fail:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Hope that the information provided is useful.

  For any help related to this problem or any question of Windows, you can still display in the Microsoft Community Forum!

• Windows Defender/Virus Scan problem

  Whenever Windows Defender (also Avast Virus Scan) to scan my pc in its scheduled task
  my PC freezes... whenever the analysis runs. I also noticed that it freezes on a particular file analyzed imapi2fs.dll, I tried the system restore, no longer works. What seems to be the problem with this?

  Hello

  To be sure that your system is free malware use these and try cleaning it (some malware can get in)
  because they come forward security products are updated to catch them).

  BTW, I use Avast too, here's a tip - stop all shields is not necessary except leaving Standard, Web, and
  Operation of the network. (Double-click the blue icon - details look OK. - upper left Shields - put end to those you)
  do not use.)

  Run the malicious Microsoft removal tool, scan with Malwarebytes and add Prevx to be sure that everything is clear.

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows Update - if necessary, you can download it here.

  Download - SAVE - go where go out you there - top - right click RUN AS ADMIN
  (Then run MRT as shown above.)

  Malicious removal tool from Microsoft
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Malwarebytes - a scanner at the request - update on the updates tab and run whenever you think malware.
  http://www.Malwarebytes.org/

  Here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  also install Prevx to be sure that it is all gone.

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  ---------------------------------------------------

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  I would also like to launch SFC and Chkdsk to ensure that corruption is disabled.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------
  Please do ALL above 1.

  If the problem still occurs check your startup programs and services. Also check what programs are left
  running in memory.

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.

  These can help first of all check the current process if necessary however use the clean boot and the process of elimination.

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• I hear a lot about several programs for maximum protection, how can I use the firewall of cases AND stop the rest of loading or starting at startup?

  At the start of my acer aspire desktop from walmart (not saying not just because his Wal-Mart like this cant be) I noticed that mcafee takes up some space, whenever she starts up. I only need the firewall and what is needed to run just the firewall. I use panda antivirus for viruses and malwarebytes antimalware for this. I would like to know, step by step if possible... How to stop or 'block' additional cases of services from the very beginning that it interferes with the pandas scanner, spikes in CPU when I don't need to use it and occationally crashes my computer by overloading, my ram is 500 MB and it started happening a few days out of the box. Once I have shut down the computer runs faster, but I lose my firewall, so I don't really wish to go unprotected, but really not need the rest services case as I hav more to compensate. The only thing I want to know here's how to get to where I can block all mcafee services that do not affect its ' firewall service while preventing others from starting in the first place. I don't mean that I found through research on the internet because they do not explain how it's done and avoid mentioning insofar as I've seen. If the answers there, I give credit to those who has asked and answered before, I just need help. :'(c'est un windows 8.1 je crois, mais si cela semble éteint juste me dire où regarder vers le haut, de toute façon je doute qui aura une incidence sur ma question trop.)

  I don't know if this is possible. If it was me, I remove McAfee completely and just use Windows Firewall. It is the only firewall I have used for ten years and never had any problems.
   
  How to uninstall or reinstall supported McAfee products using the McAfee Consumer Products Removal tool
  http://service.McAfee.com/FAQDocument.aspx?ID=TS101331
   
   

• Whenever I try to update, I get the message "windows Explorer has stopped working". It then seeks a solution, restarts, and immediately stops again. No error code just a constant circle. This has happened for days. I am running windows 7.

  Whenever I try to update, I get the message "windows Explorer has stopped working".  It then seeks a solution, restarts, and immediately stops again. No error, just a constant circle of shutdown and startup code.  This has happened for days.  I am running windows 7.

  I think that norton or mcafee may have been preinstalled as trial versions, but I've never actually used them. Unfortunately I can't use the windows Explorer, so I can't check if they are still there.

  We will cover all the possibilities.

  1. download each of the tools for deletion below, save it to your desktop:

  Norton Removal Tool: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee removal tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all software (including LiveUpdate and Add-ons of Norton) Norton through Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view)

  IMPORTANT! => Activate the Windows Firewall immediately after the restart.

  IMPORTANT! => Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed the steps #4, #5 and #6 below!

  4. right click on one of the files that you saved in #1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  5. Repeat step #4 for another removal tool.

  Tips:

  -Online use another computer to download the removal tool, if necessary, then transfer it to the computer via CD, DVD, or a USB brand new, never been used (flash drive), or a summer freshly updated in shape.

  -Online start the problem in Mode safe computer, if necessary, proceed as above.

  -Online after completing all of the above, uninstall AVG Free & reboot. Now do a new installation of AVG Free 9.0, this time select the CUSTOM installation option and do NOT install (uncheck) Linkscanner Search-Shield, Active Surf-Shield, security or the email of crawl components toolbar.

  Why you don't need your anti-virus to scan your email
       http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  -Online download/run system update before running Windows Update again: http://support.microsoft.com/kb/947821

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Virus scan Avira would stop working and freeze the computer whenever an analysis was carried out. Tried to uninstall and reinstall, but still had the same problem. Impossible to uninstall now due CCPLG. XML error.

  Hello, I have been using Avira anti-virus on my computer for the past two years with no problems.  I run a scan on my computer every day and noticed problems with it a few days ago.  The analysis would be about 21% when he would stop scanning and freeze my computer.  The RAM would be also be maxed out at 100%, and I need to restart the computer manually.  When I ran the scan in safe mode, it worked fine, but then continued to not work when the computer is not in safe mode.  I would also get a security alert Windows telling me that Windows did not antivirus software on this computer.  I tried to do a system restore which goes back to the day before the problem started to happen with the scan, but I still have the same problem.  I tried to uninstall the program again, but I get the message: Setup could not determine feature control file, or was not able to read it properly the. I also received a message about CCPLG. XML. I don't know what to do at this point or what was wrong in the first place with my antivurus software, but I feel that I continue to do worse with everything I want to do about it.  If you can offer any help with this problem, it would be much appreciated.  I have to go to work now, so I'll check tomorrow and hope that someone decided to go back to me.  Thank you.

  There are similar problems listed in the Forums of Avira.

  Have a read of the info in them; who can help you:

  http://Forum.Avira.com/WBB/index.php?page=thread&ThreadId=77368

  http://Forum.Avira.de/WBB/index.php?page=thread&PostID=729964

  Both above the Avira Forum entries have the same problem, CCPLG. XML, like you with solutions provided.

  http://www.Avira.com/en/support/kbdetails.php?ID=135

  Avira has also a manual uninstall. read the link above.
  Try this: uninstall/reinstall Avira as it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:http://www.avira.com/en/support/

  Contact the Avira Support on this problem with their anti-virus software.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also, try asking the security of Vista and the Privacy Forum.

  They know a little about the Avira software there.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/threads

  See you soon.

  Mick Murphy - Microsoft partner

• _ "WindowsUpdate_800700CB" "WindowsUpdate_dt000" ___Host that process for Windows Services has stopped working as was the closed .___The system not found the environment option entered .___User control of accounts

  I tried to download a 'Virtual Villagers' Limewire program (what was I thinking?) and then I had all these virus that messed up my computer big time.

  I have the error messages are:

  Host process for Windows Services has stopped working as was closed.

  The system could not find the environment option that was entered.

  When I try to install the updates:

  "WindowsUpdate_800700CB" "WindowsUpdate_dt000"

  The change I made before all this was trying to install Limewire "Virtual Villagers" program.

  I tried to go through the files and remove the sources of the Trojans, I ran several scans Malware Bytes (each indent to 4 Trojan horses, Rpot Kits, Ad/Spyware every time) and recently tried the Windows scanner. Who found 2 Trojan horses and withdrawn. Subsequently, I made a Malware Bytes scan which found 1 Trojan and I removed it.

  I'm not able to create, delete or modify anything in the UAC. Uninstall the habit of most of the things I try to uninstall programs and features. I'm more able to control the volume on my computer with the arrow keys and Fn. My Gallery of photos will not preview more and my computer will not install updates. My computer turns off without warning a lot and takes awhile where I can turn it back on and I hope not to have it close back 20 minutes. I try to use the system restore, but it won't work. I don't have a Windows Vista disc.

  How I have difficulty to all this and permanently delete all viruses and malware?

  Hello

  I suggest you try the following steps:

  Step 1: Try to create another user profile, and then test to see if the problem persists

  If you do not have a different user account, you will need to create a (see link below). If everything works fine with a different user profile, you can infer that the user profile is damaged, click on the link to find out how to solve this problem.

  Create-a-user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Step 2: You can follow the steps provided by Vincenzo Di Russo MVP to get rid of malware on your computer, please click onhere.

  You can see the steps mentioned in the link below

  Windows Update error 80070422, 80244019, or 8DDD0018
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070422-80244019-or-8DDD0018

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The purpose of doing a virus scan after Windows starts in safe mode?

  I've heard some suggestions that, in certain circumstances, it is best to do a virus scan after Windows starts in safe mode. So I have two questions:

  (1) would what type of circumstances you perform a scan antivirus in safe mode?

  (2) what are the advantages or disadvantages?

  I have found no reliable info that answers to these questions and would be grateful for any info, or even just a point in the right direction.

  Thank you!

  Hello

  The advantage is that some process and services are not loaded in Mode without failure there is less chance
  This malware can load and interfere with the process. The downside is the same if its best
  to run the malware checks mode safe and then in Windows. Or run in Windows and as appropriate
  difficult to remove malware is detected then run in Mode safe, then in Windows.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER THAT you are sure that the machine is clean of any malware.

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

• Svchost.exe application error, host process for Windows Services has stopped working

  Original title: Svchost.exe application error [windows loses focus]

  Every two minutes, windows 7 loses focus on the current window and I went in my event logs and found hundreds of errors of svchost.exe. Here's one of them:

  Name of the failing application: svchost.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc3c1
  The failed module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
  Exception code: 0xc00000fd
  Offset: 0x0000000000018e3d
  ID of the process failed: 0x81c
  Start time of application vulnerabilities: 0x01cd7970b1953fa0
  The failing application path: C:\Windows\system32\svchost.exe
  The failed module path: C:\Windows\SYSTEM32\ntdll.dll
  Report ID: efb97cea-e563-11e1-a232-002655497401
  The error message I receive after automatic power off repairs in the center of the Action is "host process for Windows Services has stopped working" and the process that opens after the loss of focus is Werfault.exe.
  Thank you for your time.

  Hello

  1. when exactly do you get this error message?

  2 have you made changes on the computer before this problem?

  Method 1:

  Step 1:

  Try to start your computer in safe mode and check.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2:

  If the problem does not occur in safe mode, perform the clean boot. Read the following article.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: once you are done with the boot, please follow step 7 of article to reset your computer to normal startup.

  Method 2:

  Try to scan your computer with the Microsoft Safety Scanner and check.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: When performing analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data can be lost.

  Method 3:

  You try to perform the SFC (System File Checker) scan on your computer and check. Read the following article.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  It will be useful.

• In the course of a defender of virus scan or windows computer scan hangs at a certain file.

  During a virus scan or windows defender analysis the computer freezes at a particular file: C:\windows\system32\driverstore\filerepository\lxbzw2k.inf_4430bd8c\hebrew\lexlmpm.dll

  I tried:

  McAfee Virus scan several times

  Windows Defender

  Disk Defrag

  Disk Cleanup

  Cleared browser history

  Cleared Temp files and Cookies

  Thanks for your help.

  Please start the command prompt (cmd.exe) with admin rights [1] and run sfc [2]:

  sfc.exe/scannow

  He is able to find and repair broken files?

  Also try to run chkdsk /f /r to fix HARD drive problems.

  Best regards
  André

  [1] http://windows.microsoft.com/en-US/windows7/How-do-I-run-an-application-once-with-a-full-administrator-access-token
  [2] http://support.microsoft.com/kb/929833

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/