Windows Visa Home Premium functions no longer work after installing Norton System Works.

  • I installed Norton System Works. Almost immediately, I have encountered the following problems:
  • 1. it takes anywhere from 3 to 5 times to use the mouse to block a section for copy/cut.
  • 2 Microsoft Office Professional stops when I open a product and click on the Windows symbol in the upper left corner, rather than give me a drop-down list.
  • 3. when the angle by using Microsoft Outlook and open an email, if I click on the 'x' in the upper right, instead of close the e-mail, he leaves the program.
  • Reinstall Windows Visa Home Premium will solve these issues?
"Bobby1728" wrote in message news: 7337c24e-0c 57-4919-88b 9 - 49dc21c72196...
a. I installed Norton System Works. Almost immediately, I met the
following issues:
.....
> g.. Reinstall Windows Visa Home Premium will solve these issues?
>
 
Unlikely - but removing Norton might! (followed by a restoration of the system back to)
before you install)
NSW is now the most overbloated, more... software again
invented by Symantec.
 
Before installing Norton - you made sure that your system is in a
State to receive? -Uninstalled your old AV and run the removal
program that is almost always necessary before installing a new AV?
 
Have you had any problems before you install it? -have you had an asset
infection before installing it?
 
--
Noel
 
 

Noel Paton | Nil Carborundum Illegitemi | CrashFixPC

Tags: Windows

Similar Questions

  • Acer 5517 - 'invalid copy' of Windows 7 Home Premium 64 - bit image factory after reinstall

    You just bought an Acer 5517 second hand... the copy of Windows that was top was hacked...
    so I found the image factory saved and reinstalled it..., but Windows gives me an error "invalid copy..."
    the internal key factory should never spoil, right?

    Here are the details... thank you in advance for any help!

    Diagnostic report (1.9.0027.0):
    -----------------------------------------
    Validation of Windows data-->

    Validation code: 0
    Validation caching Code online: n/a, hr = 0xc004f012
    Windows product key: *-* - WJ2H8 - R6B6D-7QJB7
    The Windows Product Key hash: ckKNc + BBPDWmo1LUlOkraNjlQ34 =
    Windows product ID: 00359-OEM-8992687-00006
    Windows product ID type: 2
    Windows license Type: OEM SLP
    The Windows OS version: 6.1.7600.2.00010300.0.0.003
    ID: {D78683C4-E6D9-4367-9A79-AD8F685CD6F9} (1)
    Admin: Yes
    TestCab: 0x0
    LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Product name: Windows 7 Home Premium
    Architecture: 0 x 00000009
    Build lab: 7600.win7_rtm. 090713 1255
    TTS error:
    Validation of diagnosis:
    Resolution state: n/a

    Given Vista WgaER-->
    ThreatID (s): n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002

    Windows XP Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    File: No.
    Version: N/a, hr = 0 x 80070002
    WgaTray.exe signed by: n/a, hr = 0 x 80070002
    WgaLogon.dll signed by: n/a, hr = 0 x 80070002

    OGA Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002
    OGAExec.exe signed by: n/a, hr = 0 x 80070002
    OGAAddin.dll signed by: n/a, hr = 0 x 80070002

    OGA data-->
    Office status: 102
    Microsoft Office Home and Student 2007-100 authentic
    OGA Version: N/a, 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Office Diagnostics: 77F760FE-153-80070002_7E90FEE8-175-80070002_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_B4D0AA8B-920-80070057

    Data browser-->
    Proxy settings: N/A
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
    Default browser: C:\Program Files (x 86) \Internet Explorer\iexplore.exe
    Download signed ActiveX controls: fast
    Download unsigned ActiveX controls: disabled
    Run ActiveX controls and plug-ins: allowed
    Initialize and script ActiveX controls not marked as safe: disabled
    Allow the Internet Explorer Webbrowser control scripts: disabled
    Active scripting: allowed
    Recognized ActiveX controls safe for scripting: allowed

    Analysis of file data-->
    [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0 x 80070003]
    [File mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0 x 80070003]
    [File mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0 x 80070003]
    [File mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0 x 80070003]

    Other data-->
    Office details: {D78683C4-E6D9-4367-9A79-AD8F685CD6F9}1.9.0027.06.1.7600.2.00010300.0.0.003x 64*-*-*-*-7QJB700359-OEM-8992687-000062S-1-5-21-840722075-3706858346-4016605683Acer Aspire 5517 Acer V1.0820091020000000.000000 + 00012BB3607018400FE04090409Time(GMT-05:00) Standard is03HPQOEMSLIC-MPC102100Microsoft Office home and Student 20071219

    Content Spsys.log: 0 x 80070002

    License data-->
    The software licensing service version: 6.1.7600.16385

    Name: Windows 7 HomePremium edition
    Description: operating system Windows - Windows (r) 7, channel OEM_SLP
    Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
    ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
    Extended PID: 00359-00178-926-800006-02-1033-7600.0000-0012001
    Installation ID: 009670605843476656541915496230749981225934318134904663
    Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
    Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
    Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
    Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
    Partial product key: 7QJB7
    License status: initial grace period
    Time remaining: 43200 minute (30 day (s))
    Remaining Windows rearm count: 2
    Time to trust: 2009-11-06 05:05:33

    Windows Activation Technologies-->
    HrOffline: 0x00000000
    HrOnline: n/a
    Beyond: 0 x 0000000000000000
    Event time stamp: n/a
    ActiveX: Not registered - 0 x 80040154
    The admin service: not registered - 0 x 80040154
    Output beyond bitmask:

    --> HWID data
    Current HWID of Hash: LgAAAAEAAgABAAEAAAABAAAAAgABAAEA6GFUSD62VPmgHnDSaDI0y/6osNh4qg ==

    Activation 1.0 data OEM-->
    N/A

    Activation 2.0 data OEM-->
    BIOS valid for OA 2.0: Yes
    Windows marker version: 0 x 20001
    OEMID and OEMTableID consistent: Yes
    BIOS information:
    ACPI Table name OEMID value OEMTableID value
    APIC ACRSYS ACRPRDCT
    FACP ACRSYS ACRPRDCT
    HPET ACRSYS ACRPRDCT
    START ACRSYS ACRPRDCT
    MCFG ACRSYS ACRPRDCT
    SLIC SLIC-MPC HPQOEM
    SSDT AMD PowerNow

    I'm afraid that someone will end you in completely in the wrong direction on this. The recovery media is probably completely OK.

    The HP SLIC has absolutely nothing to do with the windows you are trying to install, but stands in the BIOS of the laptop. Someone hacked the BIOS Acer to tell windows antifeatures of piracy which is HP laptop, presumably so that they could use HP media instead. Reinstalling Windows will not fix the BIOS.

    All I can suggest is to download the Acer BIOS update files and try and install one to replace the SLIC entry. There is however 2 caveats to that. 1stly that the damaged area is not always included in the files to update the standard BIOS, so if you can run a BIOS update may not solve the problem. 2ndly some BIOS update programs you cannot install an older than the currently installed BIOS and one that fits in a first time (because it can be complete) would be the version original factory.

    It's not all just Microsoft to blame for this issue when it was caused by someone trying to circumvent the measures to combat software piracy that any developer has the right to use. As said from your description that it is only a problem due to fraudulent activity.

    Also when you are communicating on this forum you're not dealing with Microsoft, all the people here are voluntary and have no direct involvement with Microsoft to help posters like you.

  • Windows 7 Home Premium switch user screen appears after that so much time has passed well that slowed after the SmileDesktop with screen saver is installed, but do not know how to stop it.

    I used the selective startup to the Office of Smile, which replaces and updates the old Webshots Desktop, which includes the automatic download and auto downloads of images from their site as well as a screen saver.

    There nothing good. rest after so many minutes I connect get back a windows screen does not cause me to lose any data or stop all processes. All running processes continue, but it's the nagging drawback of signing as myself to the computer after having been automatically set user to switch mode. It's probably the fault of this program. In addition, before this Webshots desktop update which included also a screen saver Windows update the eve told me don't not to unplug my computer and that she had to deal with several updates of windows, so I went and the computer stop moments later. The next day was when the message for an update has been waiting for the SmileDesktop program, which is a program that mimics Webshots Desktop, as well as replace the Webshots Desktop. After installed SmileDesktop automatically changed my screen saver settings that were on any mode SmileDesktop screen saver mode. I clicked on the option to disable screen saver. That's when I first noticed the screen splash appearing after that so many minutes of inactivity, change that said user and then I started to worry.
    Norton has found no problem with my computer, and
    Finally, I gave up.

    Hello

    Thanks for asking this question to Microsoft Community.

    If I understand correctly, you want to disable the fast user switching option. Could you please answer a few questions before moving?

    Since when are you facing the issue? Do you have any security program installed on the computer? How many accounts is configured on the computer? Have you done a recent software or changes to the material on the computer?

    Here is an article that will help you to turn off the fast user switching option. Alternatively, you can uninstall Office to smile and check if it helps. You can also make the screen saver password that is built into Windows. Follow these steps:

    (a) open screensaver settings by clicking the Start button, then Control Panel. In the search box, type screen saver, and then uncheck the box for password game screen.

    Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

  • I have Windows Vista Home Premium and whenever I save it fails. & System Restore does not work.

    Backup fails whenever I try to do, and system and Restore is not responding or the other.

    Hello

    do not post the same question more than once in these Forums

    what you're doing is confusing

    responded to your other Thread

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/can-i-do-back-up-and-System-Restore-my-PC-has/937c41ef-2f1a-4157-A2BD-f608fc6829b6

  • Limitations of re-Activation of Windows 7 Home Premium OEM

    I think about building a new PC Core i7 and Windows 7 Home Premium OEM license purchase. I understand that in the future, if I make significant material changes, such as the replacement of the motherboard or the CPU, I re - activate Windows 7.

    My questions are:
    1 - How many times can I re - activate Windows 7 Home Premium OEM as long as I install it on one PC?
    2 are there limitations to the activation of the operating system, as the replacement of the motherboard, processor and hard drive at the same time?

    Thank you!

    1. If you change the motherboard, it invalidates the OEM licensing all together.
    -OEM versions allow all upgrades of equipment with the exception of a upgrade to a different model motherboard
    The license is linked to the motherboard when its installed and active.

    2. by phone, then upgrade with wisdom.
    Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com

  • Bluetooth doesn't work does not correctly after the installation of Windows Vista Home Premium Service Pack 2 (SP2) on Dell laptop

    I searched this forum and almost all resources on the net for days now nothing works.  Give the message to a thread more appropriate that I couldn't find one that is truly representative and am a newb at this.

    Summary of the problem: Bluetooth connectivity does not work properly after the window Vista Home Premium Service Pack 1 and 2 installation (SP 1 and 2).

    My system:

    Laptop Dell Inspiron E1705, 32-bit Winows Vista Home Premium SP2, Dell Wireless Bluetooth 355 Module + EDR 2.0

    * My system was purchased in 2006 with Windows XP, but was not entitled to a free Windows Vista Home Premium Upgrade I did. I installed Windows Service Pack 1 and 2 about a week ago.

    Problem: After downloading and installing the Windows Vista Home Premium Service Pack 1 and 2 (SP 1 and 2), my system does not recognize my Bluetooth (a touch of Sprint also) device known as the HTC Vogue.  I stress that I have not had any problems with this device before downloads.  I can't revert to the pre - SP State 1 and 2 because my system restore does not have these points more.

    I have read several posts on various sites about people having similar problems with Bluetooth connectivity after the Vista SP 1 and 2 facilities.  The problem is obviously the need for an updated driver.  I went to the site to download driver Dell and the Blueooth only updates available are the following. (Note: these drivers all date from 2006 and 2007).

    http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=RC956904&l=en&s=pub&SystemID=INS_PNT_P4_9400&os=WLH&osl=en&servicetag=&catid=-1&impid=-1&deviceid=12084&libid=5&typeid=-1&dateid=-1&formatid=-1&source=-1&releaseid=R159805&formatcnt=1&vercnt=1

    I had these installed before the SP 1 and 2 have been installed and they worked very well. After the upgrade, these drivers do not work.  They won't recognise BT devices.  I tried to upgrade the drivers by using update Broadcom suggested below it, but an error of following installation to contact Dell.

    http://www.Broadcom.com/support/Bluetooth/update.php

    I contacted Dell via e-mail and on the phone, but they want to charge me $60 for a one time service call just to talk about the problem because my warranty has expired. Provide updated drivers is not a problem of security in my opinion.  Even after explaining the situation, their continuous support to just send me the link to download Driver Dell above with out-of-date drivers.  I guess that's what they are charged to do, they do not have to admit a problem of compatibility.  This obviously the same link they would charge $60 to send.  I explained that I need just a Bluetooth Driver from Dell to at least version 6.3.   Needless to say, I will never buy another Dell product.

    On my end, I tried to uninstall my current drivers and then by installing a newer driver to support Gateway (Version 6.2.1.500 for and Acer).  This allows me to install some parts of this update and the update Broadcom. However, it is not a perfect installation and expires after about 90% saying "this update is not for this system" because it is the gateway not Dell to be provided.  Displays the version of the driver on my computer is Version 6.3.5.430 after doing this, but it is not a complete installation and some features are not available.

    Does anyone have experience with this issue? I would like to have a link with some bluetooth drivers generic Version 6.3 type which will allow me to use the Broadcom link to upgrade to the last version that works with Vista SP 1 and 2.

    Thank you for your help.

    Support FREE from Microsoft for SP2:

    https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

    Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

    Microsoft free support for Vista SP2 at the link above.

    See you soon.

    Mick Murphy - Microsoft partner

  • "Windows 7 Home Premium SP1 64-bit, an error message indicates" the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade.

    Tried using Windows Anytime Upgrade. Bought at Staples have product key is entered correctly. "Following instructions, accepted USA get error message says ' the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. »

    Which edition of Windows 7 is installed on the machine?

    Which edition of Windows 7 you are trying to do an Express upgrade to?

    Please note that the Express upgrade does not support OEM, MSDN-Academic, Volume (the student faculty licenses) license. If you are in possession of all these brackets, you will need to save and do a custom clean install. If you want to do it, please backup your Windows 7 Home Premium or according to edition currently installed. Some licenses for Windows distributed to tertiary level students are not perpetual, which means that you cannot continue to use the software after a course or graduating.

    ---------------------

    Windows 7 Anytime Upgrade fails:

    If your getting the following: error: Windows Anytime Upgrade failed
    This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
    See: http://support.microsoft.com/kb/2660811

    = Other reasons and possible corrections.

    Windows Anytime Upgrade fails with the error:
    "every time that the upgrade has failed. Go online to solve the problem.
    http://support.Microsoft.com/kb/2658652

    If Anytime Upgrade still does not work:

    Shut down and restart your computer.

    Make sure that the Windows updates have been installed.

    Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

    If Anytime Upgrade still does not work, turn off the user account control:

    1. go in user accounts in Control Panel

    2 change user account control settings

    3. pull the slider to the level as low as possible

    4. restart the PC

    5. pass by the "Anytime Upgrade" as usual

    Try the following:

    1 disable any security software before attempting to upgrade

    2. make sure that your computer is updated (devices and applications)

    3. disconnect all external devices before installing.

    4. check your hard disk for errors:

    Click Start

    Type: CMD, according to the results, right-click CMD

    Click on "Run as Administrator"

    At the command prompt, type: chkdsk /f /r

    When you restart your system, your computer will be scanned for errors and will try to correct them.

    1. click on start, type msconfig in the search box and press ENTER.

    User account control permission

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    2. in the general tab, click Selective startup.

    3. under Selective startup, clear the check box load startup items.

    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

    5. click on OK.

    6. When you are prompted, click on restart.

    7. after the computer starts, check if the problem is resolved.

    Also run the Windows 7 Upgrade Advisor:

    http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

    Who should I contact if I have problems installing and / or activation of my product key card?

    Please contact to the: www.windows7.com/getkeysupport.

    If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

    Learn how to install Windows 7 Service Pack 1 (SP1)
    http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

    If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
     
    HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  • HP simplepass does not work on my windows 7 Home premium.

    Original title: hp simplepass does not work properly. my os is windows 7 home premium. it did not work properly., but the program does not start

     

    I use a hp laptop pavilion dv6 series. the hp simplepass 2011 program was working properly. but now since a few days it doesn't. also, the extension simplepass crashes at run time. the program is also not opening. What should I do?

    My os is windows 7 Home premium.
    Hello
     
     
    1 did you changes to the computer before the show?
    2. what happens when you try to open the program?

     
    Try to open the boot program and see if that helps.
    Reference:
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
     
    Note:
    After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
     
     
    If the article above is not enough, you can contact Hp for assistance.
    http://h30434.www3.HP.com/
  • Is there a version of Windows Movie Maker 2.6 (not Windows Live Movie Maker) that will work on Windows 7 Home Premium?

    I made a video on a computer on which the Windows 7 Enterprise operating system.  Windows Movie Maker 2.6 is on this system.  I tried to open and edit the video with Windows Live Movie Maker, but he was not able to do.  Check if there is a version of Windows Movie Maker 2.6 which will run on Windows 7 Home Premium

    I have this version installed on my Win7.
    http://www.Microsoft.com/en-US/Download/details.aspx?id=34
  • I can't move my laptop Windows 7 Home Premium to Professional by using Windows Anytime Upgrade

    I have been unable to upgrade my laptop Windows 7 Edition Home Premium to Windows 7 Professional by using Windows Anytime Upgrade. I have a genuine Windows 7 Professional product key, but I'm not sure whether it is an OEM version or retail. The product key works for the x 86 and x 64 editions? I do the upgrade using the disc?

    Yes, this works for 32 and 64-bit architectures as long as they are the same edition.

    Please note that the Express upgrade does not support OEM, MSDN-Academic, Volume (the student faculty licenses) license. If you are in possession of all these brackets, you will need to save and do a custom clean install. If you want to do it, please backup your Windows 7 Home Premium or according to edition currently installed. Some licenses for Windows distributed to tertiary level students are not perpetual, which means that you cannot continue to use the software after a course or graduating.

    Windows 7 Anytime Upgrade fails:

    If your getting the following: error: Windows Anytime Upgrade failed
    This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
    See: http://support.microsoft.com/kb/2660811

    = Other reasons and possible corrections.

    Windows Anytime Upgrade fails with the error:
    "every time that the upgrade has failed. Go online to solve the problem.
    http://support.Microsoft.com/kb/2658652

    If Anytime Upgrade still does not work:

    Shut down and restart your computer.

    Make sure that the Windows updates have been installed.

    Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

    If Anytime Upgrade still does not work, turn off the user account control:

    1. go in user accounts in Control Panel

    2 change user account control settings

    3. pull the slider to the level as low as possible

    4. restart the PC

    5. pass by the "Anytime Upgrade" as usual

    Try the following:

    1 disable any security software before attempting to upgrade

    2. make sure that your computer is updated (devices and applications)

    3. disconnect all external devices before installing.

    4. check your hard disk for errors:

    Click Start

    Type: CMD, according to the results, right-click CMD

    Click on "Run as Administrator"

    At the command prompt, type: chkdsk /f /r

    When you restart your system, your computer will be scanned for errors and will try to correct them.

    1. click on start, type msconfig in the search box and press ENTER.

    User account control permission

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    2. in the general tab, click Selective startup.

    3. under Selective startup, clear the check box load startup items.

    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

    5. click on OK.

    6. When you are prompted, click on restart.

    7. after the computer starts, check if the problem is resolved.

    Also run the Windows 7 Upgrade Advisor:

    http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

    Who should I contact if I have problems installing and / or activation of my product key card?

    Please contact to the: www.windows7.com/getkeysupport.

    If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

    Learn how to install Windows 7 Service Pack 1 (SP1)
    http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

    If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
     
    HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  • KB2296011 causes the blank screen in Windows Vista Home Premium?

    I'm troubleshooting an issue with an installation of Windows Vista Home Premium on a laptop. After Tuesday October 12 updates, the laptop goes to a blue screen after authentication with any account. There is a mobile cursor mouse, but nothing else. C/a. gives the menu, but "Start Task Manager" has no effect, restart will only work.

    I am able to login normally mode without failure. Remove the update KB2296011 removes the problem, I narrowed down it to only this update. It is now necessary to restart and use system restore to go back before this particular update to access Windows.

    I did the following to troubleshoot:

    (1) I tried to install the system update tool, which had no effect.

    (2) I tried to install the KB2296011 update manually after downloading, the problem returns after installing.

    (3) I tried to install the KB2296011 update manually mode without failure by another post here, but this is not possible, which gives the following error: "Windows Update Standalone Installer: Installer encountered an error: 0x8007043c.»  This service cannot be started in Mode safe. »

    It seems up to present have no way to obtain this update to install without the origin of the white screen issue. Please advice, thank you.

    OK, it looks like at this will be my last post.

    This technician seems to address the issue much differently from the rest. After the things we have done in my previous post, he seems convinced that the problem occurs when this security update is installed, it thinks it's UAC which is damaged, and possibly other files. If its resolution suggested the problem is to run a repair on Vista installation, in order to repair potentially damaged or corrupted files. This would correspond well with hijackware theory posted earlier, too.

    It seems door by another symptom not reported to me or noticed until now. With or without UAC enabled, standard users cannot connect. It passes the connection, in the preparation of your office for a disconnection. Administrative users can connect very well. As the primary user of the machine is an administrator (of course!), this was not noticed until I created a Standard user to test and found this problem.

    I hope than a repair installation (or even better, an upgrade, as I prefer to simply wipe the HD and start over) will solve the problem. The machine has 2 GB of RAM and a 2 GHz dual core chip, so I think it can handle very well (my wife does mobile) Win7.

    I hope that all of this novel, we have written here will help others as well.

  • age of empires II installed on windows 7 Home premium?

    I've installed Halo CE on vista and then I upgraded to windows 7 home premium and it still works but I do not know if can I install another game like age of empires II? and I would like to know if it turns not normal or with some sort of question or I can not install the game

    Hi there dude_IDk

    Yes, you can install games like age of empires on your windows 7. all you have to do is run the installer in compatibility mode for Windows xp.

    for this,.

    Right-click on the setup.exe and then go to properties > then compatibility > then choose the compatibility mode of windows xp. :)

  • Resale of Windows 7 Home Premium upgrade.

    Is it legal to sell my copy of Windows 7 Home Premium Upgrade. It has been installed on a computer at a given time, but this computer is no longer in use due to a complete failure then the replacement. If it's legal, what information should I give the buyer regarding the activation of the program?

    17. TRANSFER TO ANOTHER COMPUTER. a. software other than Windows Anytime Upgrade. You may transfer the software and install it on another computer for your use. This computer becomes the licensed computer. You are unable to share this license between computers.

    Answer, Yes

    The phone activation may be necessary:

    How to activate Windows 7 manually (activate by phone)
     
    1) click Start and in the search for box type: slui.exe 4
     
    (2) press the ENTER"" key.
     
    (3) select your "country" in the list.
     
    (4) choose the option "activate phone".
     
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
     
    (6) explain your problem clearly to the support person.
     
    http://support.Microsoft.com/kb/950929/en-us

  • Windows 7 Home Premium OEM upgrade does not not after RAM upgraded FRO 1 GB to 4 GB

    New installation Windows 7 Home Premium 64 bit OEM worked the 1st time on workstation Dell Precision 380 (Pentium 4, 3.0GH, 1 GB RAM, Windows XP), so I registered with Microsoft.  PC worked too slowly, so I upgraded the RAM from 1 GB to 4 GB.  PC will not start now.  Nothing on the website of dell, or the PC manual led me to believe that there could be a problem.

    After I had already performed several tests, PC manufacturer said to install Windows 7 AFTER upgrading the RAM.  However, as the installation before the upgrade of RAM and joined already, can I now reinstall the OS without affecting the OEM license.

    You can reinstall Windows OEM on the same computer. Case of failure of the online activation:

    Call Microsoft use the manual phone Activation

    If you have trouble activating Windows 7 you can call Microsoft to activate it by following these steps:
    1. with the operation of Windows, click Start, then in the search box type: slui.exe 4
    2. press enter on your keyboard
    3. Select your country.
    4. Select the telephone activation option, then dial the given number and hold for a real person.

    For more details: http://www.sevenforums.com/tutorials/18715-activate-windows-7-phone.html

    Note: If you always install Windows page enter your product key, do not enter your key and uncheck the "Automatically activate when online" then click OK/next to complete the installation.

    Questions about installing Windows 7?
    FAQ - Frequently Asked Questions from Installation Windows 7 & responses

  • Windows 7 Home Premium upgrade to Windows 7 Professional without updating any time for remote desktop

    I have Windows 7 Home Premium and need remote desktop.  Can I install Windows 7 Professional (which I already have the disk) on top of Windows 7 HP and keep my current data?  Note that I don't update it any time as each post seems to use this term.

    Windows Anytime Upgrade is your only option if you want to keep your personal files and settings. You can't directly in place upgrades using the disc.

    Please note that you can not install Windows 7 Professional if the license is currently in use on another machine.

    If the license for Windows 7 Professional, you have access to is a retail version update or complete, you can use the product key and the Express upgrade to Windows 7 Edition Home Premium to Windows 7 Professional. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation). Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Professional on demand, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Professional your files, programs and settings retained.

    Please note that the Express upgrade does not support OEM, MSDN-Academic, Volume (the student faculty licenses) license. If you are in possession of all these brackets, you will need to save and do a custom clean install. If you want to do it, please backup your Windows 7 Home Premium or according to edition currently installed. Some licenses for Windows distributed to tertiary level students are not perpetual, which means that you cannot continue to use the software after a course or graduating.

    http://msdn.Microsoft.com/en-GB/academic/bb250622.aspx - License of MSDN AA

    http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

    http://www.notebooks.com/2009/10/07/using-Windows-easy-transfer-in-Windows-7/

    If at any time the upgrade fails, Windows Anytime Upgrade Fail:

    Shut down and restart your computer.

    Make sure that the Windows updates have been installed.

    Download the hotfix that contains a tool called CheckSUR, this tool will look in the package and the maintenance of records and fix corrupted data, the tool is listed under kb947821 it is located at the following link http://support.microsoft.com/?kbid=947821

    If Anytime Upgrade still does not work, turn off the user account control:

    1. go in user accounts in Control Panel

    2 change user account control settings

    3. pull the slider to the level as low as possible

    4. restart the PC

    5. pass by the "Anytime Upgrade" as usual

    Try the following:

    1 disable any security software before attempting to upgrade

    2. make sure that your computer is updated (devices and applications)

    3. disconnect all external devices before installing.

    4. check your hard disk for errors:

    Click Start

    Type: CMD, according to the results, right-click CMD

    Click on "Run as Administrator"

    At the command prompt, type: chkdsk /f /r

    When you restart your system, your computer will be scanned for errors and will try to correct them.

    1. click on start, type msconfig in the search box and press ENTER.

    User account control permission

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    2. in the general tab, click Selective startup.

    3. under Selective startup, clear the check box load startup items.

    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

    5. click on OK.

    6. When you are prompted, click on restart.

    7. after the computer starts, check if the problem is resolved.

    Also run the Windows 7 Upgrade Advisor:

    http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

    Who should I contact if I have problems installing and / or activation of my product key card?

    Please contact to the: www.windows7.com/getkeysupport.

    If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

    Learn how to install Windows 7 Service Pack 1 (SP1)
    http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

Maybe you are looking for

  • SmartWatch. c the polar watch

    I'm trying to decide between buying a smartwatch or a Polar watch to track my fitness, heart rate, etc... Any thoughts?

  • want eor61ea dv7 #abu: simple switch not work windows 10

    simple pass does not, does not recognize the password at startup to access the system, no blinking light, windows drivers in the software only go to windows 8.1.How I reset the batch or reinstall simple pass?

  • Pavilion m900y: Cpu

    Hello Tech Guru... I would like to upgrade my CPU... I have a processor 9750 Quad-core... AMD-Phenam... I can get an Intel Core i-7 - 5820 K installed by a reputable dealer, or is this not possible. I'm looking for more speed... and I don't do much i

  • Uninstall Windows Live Messenger in Windows 7

    I followed all of the usual answers help on how to uninstall WLM but always come to a dead end. I go to start Control Panel - uninstall a program - click on Windows Live Essentials-, click on uninstall / change - select uninstall in pop-up dialog box

  • The MAF runtime apps

    MAF apps require any server (running ADF/MAF) when running? Or, once developed and deployed on Google/Apple Store, become developed native 100% like applications in their native environment?I thank very you much.NAT