Windows Vista 64 BSOD why?

Similar Questions

• When I start on windows vista a BSOD appears

  When I start on windows vista a BSOD with error code appears: 0x0000007E (0xC0000005, 0 x 82664872, 0x8CF57A68, 0x8CF57764) I recently downloaded and installed an application and thas when the first crash FAILED: I am running windows Vista 32 bit Ram 4 GB any help?

  If you are unable to Windows, try to go to Mode without fail (quickly press F8 just before the Windows splash screen appears.

  Please provide the following information:

  -Zip please the contents of the directory C:\Windows\Minidump

  -Transfer to the public area of a SkyDrive (https://skydrive.live.com) account

  -Post a link here so we can download it.

  and

  -Go to start and type "msinfo32" and press enter

  -When the utility opens, save a copy of it as an .nfo file and another copy in a txt file.

  -Zip them upward and download them to the Public to a SkyDrive (https://skydrive.live.com) account field

  -Post a link here so we can download it.

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  Use SkyDrive to upload collected files:

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  Information contained in your post, I can say is corruption of memory (probably a driver), but I need to say why DMP files?

• I hear a hissing sound at startup on my pc that I never heard before, and I have windows vista, anyone know why? I continue to reboot my pc until it stops.

  Original title: whistle sound at the start of the pc

  I hear a hissing sound at startup on my pc that I never heard before, and I have windows vista, anyone know why? I continue to reboot my pc until it stops.

  Hi Cupcake3381,

  ·         Did you do changes on the computer before the show?

  I suggest you to check and clean the boot if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Let us know the results.

• Tecra A9 + Windows Vista SP1 - BSOD on restart

  Hello

  When the PC is restarted, I get a BSOD with the following information.

  PAGE_fAULT_IN_NONPAGED_AREA.

  Technical info.

  Stop :-0 x 00000050 (0X817DA000, 0x00000000, 0X8278D766, 0 x 0000 00000)
  iaNvStor.sys - ADDRESS 8278 766 BASE to 82773000, time STAMP 45F3B995

  MEMORY PHYSICAL DISK 100 OF DUMPING.

  The issue occur when the system is shut down. It happens only during restart. This is the case for the last 3 days and he suddenly resurfaced.

  Thank you
  Remond.

  Hello!

  I had the same error a few years ago and it is the RAM. I think you should check with Memtest86. It s a diagnosis very good tool for the RAM and if your RAM is really defective, Memtest86 should be.
  [www.memtest86.com]

  If you search with Google you will find enough on this issue and it could also be a faulty HARD drive. But in your case, I would check RAM first, and then you can check the disk with Drive Fitness Test:

  Good bye

• Why have I not 2 15.0.0 and 15.0.1 Firefox versions in my Control Panel Window Vista x 86?

  I noticed that I have 2 different versions of Firefox 15.0.0 and 15.0.1 in my control panel in Windows Vista. Before doing anything, I need to know why I have Firefox 2 in my system and how it happened. It is safe for me uninstall older versions? If so, how? I am a beginner, not expert in computer science.

  Thank you
  Sue

  I have now changed my original message.

  There is no need to take action in such cases. The installation process went wrong, and it's a known issue. You will not have two installed copies. The problem is that the registry entries are misleading because of a bug.

  The installation process is changed to correct this problem and prevent it from happening in the future.

  I took the liberty of this post as a marking. (I will add information to related positions later, it's my lunch break, if no one else does everything first)

• Why an amplification of the RAM does not change the index performnance of windows vista?

  Why an amplification of the RAM does not change the index performnance of windows Vista?

  Hello

  I m not very well, but maybe you have more than 3 GB of RAM and Vista 32 bit.
  Usually the 32 bit OS is capable to manage and send only 3.2 GB.
  The more than 3.2 GB RAM will not operating system used and therefore would not increase the index
  In addition the laptop will be not really faster after upgrading RAM. You will notice better performance using applications at the same time, but this does not affect the index of Vista.
  But this is only my personal hypothesis.

  Welcome them

• Get BSOD when updated in Windows Vista Ultimate Edition

  I got the Windows Update for Monday, 30/11/09. Under the option updated, I clicked on the update Realtek for my wireless 801.11 b / g driver.  During the download on the window updates screen, he says that he was downloading updates. Then he went to install the updates and I got the BSOD about 3/4 of the way through.  Reboot the computer and to the Welcome screen, it said it was set up the updates.  He crossed the 1st to the 3rd stage, but remained at 0% and then in Windows. When the desktop is loaded, the window "Windows has recovered from an unexpected shutdown" came.  When I click on "Find solutions", he went the BSOD and restarted all over again with the same message "install updates" at the Welcome screen.  When I tried to cancel the window "windows has recovered...". ', he went the BSOD again and restarted again with the same method. The next time I tried to restart the computer and during the stop, he went to the BSOD and restarted everything again. This also happens when I try to shut down the computer.  The stop on the BSOD error message is Stop: 0x0000001A. Windows error that appears under Windows is 80070103.  I am running Windows Vista Ultimate Edition.  Help, please. How can I get out of this loop.  I tried the "Fix - It" program, but it's the same thing when he went to restart the computer. I know it has something to do with the appearance of the Windows Update, but I do not know how to break the loop of update.

  Bob,
  Run the Microsoft Fix - It from this link:reset Windows Update components

  It has all the steps that you have already done, but includes a couple that you don't.  After you run reboot and post back with the results.  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why can not download and install updates from Windows Vista Home Premium 32 bit?

  Why can not download and install updates from Windows Vista Home Premium 32 bit?

  Premium Vista Dell is actually not even install vista SP1, therefore, no update. In case of doubt, go to run, or cmd, type:

  WinVer the OS details appear. If no SP1, download & install it

  https://TechNet.Microsoft.com/en-us/library/cc749419 (v = ws.10) .aspx

  Use this link for download.

  http://catalog.update.Microsoft.com/v7/site/search.aspx?q=Windows%20Vista

  This link allows you to get updates from vista through the windows update catalog, once running, search the installation 'Active X'

  Microsoft.

• Windows Vista BSOD for years that I can't fix.

  Greetings,

  I have Windows Vista on my Gateway Gt5622. Every year or so I had to wipe the computer and re install Vista with drive manufacturer. The reason is that I get BSOD that I can't solve. It always seems to be something of a problem kernel or windows software. I have recently just re installed vista, everything seems to be ok. I spent a few days to install all updates and not a BSOD. He started happening after installing SP2. The only program I have is Norton 360 and 1 game called Tibia. I know that the problem is not one of those. I don't have any additional hardware installed either. Here's a copy of my BSOD file. If someone could help me please I would be very happy! Thank you for your time. Randy

  Bug Check String: MEMORY_MANAGEMENT

  Bug check code: 0x0000001a

  Parameter 1: 0 x 00041287

  Parameter 2: 0x00834c76

  Parameter 3: 0x00000000

  Parameter 4: 0x00000000

  Caused by the driver: ntkrnlpa.exe

  Caused by the address: ntkrnlpa.exe + 98292

  File description: NT kernel & system

  Product name: Microsoft® Windows® Operating System

  Company: Microsoft Corporation

  File version: 6.0.6002.18881 (vistasp2_gdr.130707 - 1535)

  Processor: 32-bit

  Plant address: ntkrnlpa.exe + 98292

  Stack address 1: ntkrnlpa.exe + 4dde4

  Stack address 2: ntkrnlpa.exe + b2fa8

  Battery 3 address: ntkrnlpa.exe + b2f7e

  Full path: C:\Windows\Minidump\Mini102114-01.dmp

  Number of processors: 2

  Main version: 15

  Minor Version: 6002

  Level the size of the file: 143 104

  Patrick,

  I installed the graphics card and so far so good. I'll put my soundcard in tonight. Ill keep you updated.

  Thank you

  Randy R.

• BSOD in Windows Vista

  I hope you can help. I have a desktop running Windows Vista Edition Home Premium that gives me the BSOD. I took it to a technician to fix it but they did not. Usually, it crashes when using the Internet, but not always. I recently downloaded Windbg and looked at the files mini.dmp, but it seems that several different errors and I don't know where to go from here. I think it's all driver problems but my updates are automatic and it said: everything is up-to-date. I can provide mini.dmp files if anyone is able to look at and just told me where to submit them. Other than this error, the computer works well no virus, worm, etc..

  Thanks for any advice you can provide.

  LaneV

  Sorry it took me so long to get back with you, last week was the final week. I ran the test memory with memory stick 1 in the 1st port and there was no error, and then in the 2nd port it gives errors. I have not ran the 2nd memory stick in the first port and no error and the 2nd port no error. I'm assuming that this time means that the memory stick 1 is bad. Does this sound right?

  Well, if it gives no errors in the slot of fist, leave it there and insert the other stick into the open and monitor the system for a few more days.

• why I can't download and save the files to my laptop... it disappears in the air... I have windows vista and ie8... Please help I'm going crazy... this laptop is my tool work... thank you. __

  why I can't download and save the files to my laptop... it disappears in the air... I have windows vista and ie8... Please help I'm going crazy... this laptop is my work tool... Thank you.

  Hello locness2411,

  Have you checked your download folder? Also you can put where you want to save a file to the desktop as, for example. Take a look at these links: http://www.tweaklibrary.com/Software_Applications/Internet-Explorer/27/Set-default-download-path-of-Internet-Explorer/10153/ or http://www.windowsreference.com/internet-explorer/how-to-change-the-default-download-directory-for-internet-explorer/ that can help you in what you want to change. Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Whenever I have shut down my system Windows Vista it makes 5 bets to day and ideas why this is happening

  Whenever I have shut down my system Windows Vista it makes 5 bets to day and ideas why this is happening

  Updates fail for a more likely reason.

  Check if you have errors associated with updates?

  1. Open Windows Update by clicking the Start button, all programs and then click Windows Update.
  2. In the left pane, click view update history.
  3. Find an update for Windows that has failed to install, and then double-click the update to view more information. Updates that have failed to install will display failed under status, next to the name of update.
  4. In the Windows Update dialog box, next to the details of the error, review the error code for the update has failed.
  5. Follow the links in the dialog Windows Update under more information or help and Support to try to solve the problem, then try to reinstall the update by using Windows Update in Control Panel or to display error codes/messages and maybe someone may be able to help others.

  Suggestion:

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

• Why can't move from Windows Vista Ultimate Edition of Windows 7 Professional?

  I installed Windows Vista Ultimate. I bought a copy of Windows 7 Professional (I didn't need all the extra guff - it was useless in Vista, do not be at all an advantage to 7). So why can I not go?

  Hello

  Ultimate Vista to Windows 7 Professional is NOT an upgrade path.

  Windows 7 Ultimate is your choice only upgrade from Vista Ultimate.

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  Supported upgrade scenarios

  Windows Vista (SP1, SP2)	Upgrading to Windows 7
  Company	Professional, company, full
  Enterprise	Enterprise
  Home Basic	Home Basic, Home Premium, Ultimate
  Home Premium	Home Premium, ultimate edition
  Ultimate	Ultimate

  This is how Microsoft has designed their operating system.

  See you soon.

• Why Microsoft did remove the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to fix it?

  No Option to install repair - SAD

  Hello

  Why Microsoft removed the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair.

  I recently had a problem where Vista Business 64-bit would only boot to a black screen with a mobile cursor - KSOD.   Who, in searching the Web I found is a fairly common problem with Vista.  I discovered that my only option was about to reinstall Vista CLEAN and all the other programs I had installed under it.  I can't believe that Microsoft released the 'repair installation option"similar to that of Windows XP, where you can hit the"R"key during installation and we left with nothing but the"System Restore"options and"Startup Repair ".  Neither of which has helped in my situation.  Since then, this was a dual system boot with XP Pro, then any restore point has been removed from the partition to Vista anytime, I started another recognized problem, by Microsoft, which Microsoft has made no significant effort to fix, in addition to recommending that you hide the partion Vista in XP - a whole of XP.  That beats a little the entire purpose of dual boot.

  As I tried to start in safe mode, it left me at the same point as a normal boot - black screen with a cursor.  I tried ctrl + alt + delete and nothing. Two Windows RE options did not help me.  This left me no option but to the completely reinstall Vista.   Why Microsoft did remove the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair.. Please don't tell me that it is because Vista uses an image file instead of an installation as XP system.   I see no other reason for not allowing the upgrade of outside BONE in addition to Microsofts greed and paranoia that he can transform the operating system easier to install illegally.  I hope that some third party has actually changed the Vista installation routine to allow you to install Vista on itself, because as it is, it's really hard for me to even recommend Vista as the operating system or install any where else, if not the only recourse after loading OS, is to reinstall completely.

  Adobe, Autodesk, and almost all other software publishers... allow you to perform a "REPAIR" of their software installation, if something prevents you to load after installation.  Even MS Office has a routine repair.  Ms has an internal version of the Setup routine which allows outside the OS upgrade option that you want to "Upgrade" / repair? ".  If not, why?

  -Todd w.

  "Why Microsoft removed the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair."

  «.. . After using XP's repair function, the operating system itself would become less stable and frankly not in a good state of repair. »

  As Todd, is the answer.

  "This response does not hold water as on one of my computers I've been running Windows XP for about four years now, after a repair install.

  Then, you were lucky.  Try to replace the system files on a computer that does not start even at a desk or safe mode usually will get a return to office, but will probably repeat the same problem in a few weeks.  Tech professional would only use this function to retrieve the data before a complete reinstallation.

  "I thought that this area was a place to really get answers instead of the ole same"answers of bs that are on all the other forums."

  It is a place that will try to help you fix your computer if you have problems.  It has technicians in computing, no decision-makers, developers or executives.  We will try to answer technical questions about problems you might have with Windows Vista.

  If you want to have input on the future of Microsoft operating systems, then help you beta-test and provide feedback to the developers.  Windows 7 and IE 8 are currently in beta.

  Another possible place you could make suggestions which could see the developers would be:

  https://connect.Microsoft.com/default.aspx

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why do display some pictures slideshow in screensaver for Windows Vista?

  Why do display some pictures slideshow in screensaver for Windows Vista? The photos in question were taken with my Android phone.  They appear very well when you view the pictures folder, but do not appear when I use the same folder for my slide show in my screensaver.

  Hi NoSpinHere,

  1. Did you the latest changes on the computer?
  2. You receive an error message when you view these photos?
  3. Are you unable to view photos taken from the Android phone?

  Check out the link and run the Fixit tool available, check if it helps.

  Windows Photo and slideshow problems

  http://support.Microsoft.com/mats/windows_photo_and_slideshow_diag/