Windows vista 64 goes to a blue screen after reboot of an installed its own.

Similar Questions

• Windows Vista crashes, I get the 'Blue screen of Death' and I have to restart. Different errors each time it crashes.

  Windows Vista crashes, I get the 'Blue screen of Death' and I have to restart. Different errors each time it crashes. I tried to reinstall vista without success of the problem being fixed

  Hello

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Blue screen after reboot during the installation of the security updates.

  Am also having problems with the blue screen when you restart to install the updates of security (1 blue screen while the computer turns off), which began before 11 security updates 13 Oct.

  These updates of security of the Oct. 13 show as pending. Then uninstalled reintsalled via windows update and still see the as pending. Also received blue screen during the uninstallation of security updates.

  Using ESET Smart Security 4.2.58.3. Removed McAfee supplied with the computer.

  Computer seems to work very well with pending status updates - no more blue screens during use. The latest version of windows update.

  Please notify

  Problem solved blue screen - had to uninstall and reinstall the suite ESET Smart Security.

• Windows Vista XP Home Upgrade generates blue screen errors

  I bought a copy of Windows Vista Home Premium (32 bit), about a year ago and I tried the upgrade to XP Home Edition Service Pack 2, and whenever I update another problem arises. The problems vary from the "Blue Screen of Death" to updates refusing to install, Vista freeze thoroughly, I'm at my wits end! Please if there is anything that can be done to solve this problem for a long time I'll be forever in your debt. I'm doing something wrong or is there something more sinister at play? I reinstalled XP and Vista at least 20 times so far, and that once he was impeccable, but due to a virus I had to reinstall it again and I'm at square one, also my x 86 Vista Software recognizes only 3.50 GB of my 4 GB memory.

  My system Spec:

  ASRock N68C-S UCC Motherboard

  AMD Phenom X 2 Multi-Core 3.1 GHz Black Edition Proccessor

  320 GB Maxtor DiamondPlus SATA HDD

  160 GB Seagate Barracuda SATA HARD drive

  4 GB Kingston ValuRam DDR3 1066 MHz

  LiteOn DVD-RW/CD-RW

  Sapphire ATI Radeon 5570 1 GB graphics card

  Hello

  System memory shown in the system information dialog box in Windows Vista is less than expected if the 4 GB of RAM is installed

  http://support.Microsoft.com/kb/929605

  This behavior is the expected result of some hardware and software factors.

  Various devices in a typical computer require memory-mapped access. This is known as memory-mapped i/o (MMIO). For the MMIO space is available for 32-bit operating systems, the MMIO space must reside in the first 4 GB of address space.

  For example, if you have a video card that has 256 MB on-board memory, that memory must be mapped in the first 4 GB of address space. If 4 GB of system memory is already installed, the part of this address space must be reserved by the graphics memory mapping. Graphics memory mapping replaces part of the system memory. These conditions reduce the total amount of memory available to the OS System.

  The reduction in available system memory depends on the devices that are installed in the computer. However, to avoid potential driver compatibility issues, 32-bit versions of Windows Vista limit the total available memory to 3.12 GB. See the section 'More information' for more information on potential driver compatibility issues.

  If a computer has many features implemented, the available memory can be reduced to 3 GB or less. However, the maximum memory available in 32-bit versions of Windows Vista is typically 3.12 GB.

• Windows Vista Service Pack 2: Compatible blue screens

  Hello. I tried to debug my friends computer. He had regular blue screens of death. I analyzed the dump files and it turned out that he had bad memory in the first 2 crashes (it linked several times windows memory diagnostic tool and even swap ram slots). Then he replaced the memory and now the system worked well.

  And then the system crashed. All of these have been "IRQL not less than ' mistakes, that I discovered by WinDBG. The klif.sys file appeared on the processor stack and was probably the culprit. The file is a driver of Kaspersky Internet Security, so I had him remove the protection completely and use a different antivirus.

  The system has been formatted and it is now ok. IT crashed again, with a BAD_POOL_CALLER. The chain of error checking was C2 which indicates a bad driver or memory. Many riders appeared including the symbols cannot be loaded, even the intel IDE driver, nvidia drivers display, avast antivirus, drivers realtek audio etc. After seeing this, I had to him be updated all drivers for their current versions.

  The system has been authorized for 2 days. IT crashed yesterday again. I give you the link to the minidump file, in the hope of getting members of the community solutions.

  http://www.mediafire.com/?0vy3xrptvzr87c0

  Help appreciated!

  -Kiki: MCP

  Hi Karan1337,

  (1) since when are you facing this problem?

  (2) what is the number of brand and model of your computer?

  Method 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the mouse and keyboard > check to see if the problem persists.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Method 2: Run the Startup Repair tool, follow the steps mentioned in the link below to access the system recovery tools.
  How to access the System Recovery Options menu?

  Run the tool to restart system as shown in the link below
  How to use Startup Repair?

  Method 3: See the steps mentioned in the article below
  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly

  You can contact the manufacturer of the computer for known problems

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista continues to display a blue screen

  I started Windows Vista Edition Home Premium x 86 SP1.  The something Adobe has shown saying that I need to upgrade flash player.  I chose to upgrade later.  Then about 10 seconds later, I get a blue screen.  Then I see a screen to choose between 2 choices of Mode safe mode, start window normally.  I started Windows normally.  The about 10 seconds after getting on the desk, I saw the same blue screen.  Then I choose Start Windows normally.  Then, after seeing the office for about 10 seconds, I saw the same blue screen.  I took start Windows normally.  Then the same thing happened again.  This time when I got to the office, I clicked on start > Shutdown and it turns off.

  What is the cause and how can I solve it.

  Here is the error message I got:

  A problem has been detected and windows has shut down to prevent damage to your computer.

  If this is the first time you've seen this stop error screen, restart your computer.  If this screen appears again, follow these steps:

  Make sure you have enough disk space.  If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates.  Try changing video card.

  Check with your hardware vendor for updates to the BIOS.  Disable the BIOS memory options such as implementing caching or shading.  If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select advanced startup options, and then select Safe mode.

  Technical information:

  STOP: 0X0000008E (0XC0000005, 0X00000000, 0X00000000, 0XB056FA8)

  Data collection for the crashdump...

  Initialization of the disk for the crashdump...

  Beginning physical memory dump.

  Dumping physical memory to disk: 100

  Total physical memory dump.

  For more assistance, contact your system administrator or technical support group.

  You certainly can't if you won't try. Download the ISO that you need for your version of Vista on
  any machine that you can. Then burn the ISO on a DVD and bring it to the Vista machine and start with
  it.

  You can also copy any DVD of Vista (as long as it's even 32 or 64 bits) and use it to repair (but
  not install Vista).

  English is my only language real, too, I was born in Dixie, and we strive to help.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows Vista-used to get the blue screen with the error on it. Re-installed Vista and the programs one by one w/restorations. Now, I get the blank screen minidump file blue w/error after reboot and...

  I find the minidump files and tried opening them and could not. Files and downloaded programs of debugging appear in the program. When I try to open them I get "you must be an administrator to open" insofar as I know that I am the administrator because supposedly everything I need is another administrator account. Also my restore will pass in a few days, and the box is no longer available. Also had an error on my printer files so I removed them, but as I (after) that I pressed the firm PC, the blue screen appeared and had to turn it off manually and of course got the minidump error message when I started again. If at this point, I'm still waiting to see if deleting the files printer helped. Any information would be appreciated.

  OK, I'll look for your next post with minidump files.

• volume corrupted when you start windows vista help said please on blue screen stop to keep from harming computer___

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You are having problems withwind of programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem
  You have a Vista DVD, if yes begin with him in the recovery environment and
  Choose the command line? If it's not see
  http://Windows.Microsoft.com/en-AU/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista
   
  Type in the command prompt
   
  Chkdsk /r c:\
   
  [If you have more than one player to repeat for each player, for example, the D: drive
  CHKDSK d:/r]
   
  Then type
   
  sfc/scannow
   
   
   
  --
  ..
  --
  "kmyn5" wrote in message news: f6ca2cb5-21f1-439 d-b56b-5e67e9c21338...
  > Remember - this is a public forum so never post private information such
  > as numbers of mail or telephone!
  >
  > Ideas:
  >
  > a.. You are having problems withwind of programs
  > b.. Error messages
  > c.. Recent changes to your computer
  > d.. What you have already tried to solve the problem
  >
   
   

• Satellite L40 - blue screen after reboot

  I have a Satellite L40.

  When I close Windows vista and reboot the laptop I get a blue screen. There must be a problem with one or more drivers. How can I find the driver that created the problem?

  With sincere friendships.
  Jetbag

  > How can I find the driver that created the problem?

  who knows what (s) but try to uninstall a driver for graphics card

• Updates cause a blue screen after reboot

  Get a blue screen when you start the computer after Windows made of automatic theses dates
  KB978262, KB971468, KB975560, KB978251, KB979099 and KB890830

  Hi Randy Gauthier Leclerc,.

  Could you give us the exact error message you get started?
  Are you able to boot to the desktop?
  Were you running any system restore after installing these updates?
   
  If you are able to boot to the desktop, we can edition all updates then install them one by one and check what update causes the update. We can avoid the update conflict by doing this.

  It is a possibility that one of the updates is at the origin of the conflict. I advise you to uninstall all updates and check. You can install these updates one by one, then check update is conflicted and you can avoid this particular update.
  You have installed for a list of the latest updates, follow the steps below:
  1. click on start and in the search bar type Windows Update and press ENTER.
  2. click on "View Update History".
  3. now click on installed updates.
  4. right click on the update you want to uninstall, and then press Ok.
   
  For more information see the link below:
  http://Windows.Microsoft.com/en-us/Windows7/remove-an-update
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows xp media center 2005 stop blue screen after 2 hours, required soltion.

  tried to update med cntr 2005 Rollup 2, but signals the need prereconsit, what?  advice please, going on several months.

  Are you referring to optional, not security update KB900325, Gene, and is offered by Windows Update (vs try to install it manually)?

  Is this the same computer as in that previous thread of yours? -Online http://answers.microsoft.com/en-us/ie/forum/ie8-windows_xp/unable-to-uninstall-internet-explorer-8-from/0388cd03-4fcd-4a73-ac7e-b69997ebd3ca

  And this one? -Online http://answers.microsoft.com/en-us/windows/forum/windows_xp-performance/how-recover-from-xpsp3-defrag-overcompressed-apps/12309aaa-19c5-476f-b9bd-b76143e15793

  And this one? -Online http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_install/double-xpsp2-windows-installdeleted-partition/eec5faef-4b2e-4dac-a56c-f5d8d2ee304b

• Windows Vista cannot identify the network wireless secure after reboot, shutdown, standby, idle, screensaver...

  I have a Dell Inspiron 9400 that is about 5 years old.  After almost every stop, restart, sleep, saving screen and idle my wireless connection icon gets a yellow warning triangle and when I open my network and Center sharing there is a red X on the 'plan' and he said: he can't identify the wireless network.  So I have to disconnect and reconnect several times to connect wireless.  There are also 2 PCs cable, 1 PC wireless and 1 laptop Mac wireless connected to the NetGear RangeMax router with no problems.  I tried to update my Broadcom 802.11 g network adapter (version 4.82.28.56 / date 21/06/06), but he says it's the most recent driver.  I use WPA2-PSK authentication with a password for the security of the wireless router.  The only one I know about computers is that when I have a problem I look up on internet forums until I have the solution, and then I followed the instructions.  It has worked so far.  If anyone can help me I would really appreciate it.

  Assuming that the signal is strong, and that there is no noise in the electrical environment (http://www.ezlan.net/wbars.html ).

  Uncheck the box to the NIC of energy economy (I.e., do not leave the card save energy).

  There may be some variations on where is the energy saving setting.

  Here are a few examples, YMMV, look around your systems.

  Example, http://www.ezlan.net/example/powersave.jpg

  Example, http://www.ezlan.net/Win7/power_sav_wireless..jpg

  Example, http://www.ezlan.net/Win7/power_save_win7.jpg

  Example, http://www.ezlan.net/Win7/adv_power-sav.jpg

  ----------------------------

  Still a problem?

  Check the support site for the manufacturer of the computer and make sure that you use the latest drivers.

  Do this if Windows native drivers claim already updated.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.

• Blue screen after installation KB2393802 / KB890830

  Windows 7 Ultimate

  I received today a handful of updates. He finished in a blue screen after reboot. Only with the restoration of the point system that I was able to start in the normal way of restoration. I installed every update one by one and was able to isolate the problem. Each of these two updates (KB2393802/KB890830) which brings back me to the blue screen. I also tried to download and install these updates manually, but had no success.

  My impression is also that other side to this problem if you for example search KB2393802 on google.

  Is it a known Microsoft issue and if there is a fix available for this?

  Any hint is appreciated.

  Cheers, mikeych

  Hello. Has been able to solve the problem. Update some hardware (e.g. video) drivers and the system once again stable. No more appeart to blue screen after installing the MS updates again.

• Blue screen after installing security update KB2419640

  After I installed Windows 7 security update KB2419640, I get a blue screen after reboot and finally do a system restore.  Can someone explain how to get this update to work? I have tried several times now and it installs by is kind of lonely. Don't know what else to do.

  TIA

  See this post in the Windows Update forum: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/10eb9b57-aada-4c49-acf1-b81f016b1ed0

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• STOP 0 x 00000050 blue screen after installing the Windows security update [Vista]

  As the title suggests, after installing an update of security on Vista, I got a blue screen on reboot. Error code 0 x 00000050. I see the suggestions of some places on the internet saying that I have to go in safe mode, but even when I try this I get the error.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft