Windows vista access programs requiring passwordcomputer admin freezes and access failed to connect to the admin profile.

I am running Windows vista and im a user not an admin when I try to access programs that require the admin password I get it but all that happens is my freeses computer and when I try to access the admin profile I correctly enter the passworcd and it gives me a connection failure. What is the problem and how to fix it?

Hello
 
1. If it works much earlier?
2. is the specific question to a few new programs?
 
Your account was damaged, I would have you difficulty the damaged user profile to solve the problem.

Tags: Windows

Similar Questions

  • Gateway GT5622 Windows Vista family premium turns black then freezes and needs power close button

    I had this problem once before at least a few days until I deleted my dual boot and reinstalled windows and now I'm having the problem everywhere once again have reinstalled windows at least 2 weeks without problem until today.

    Entire screen turns black without mouse or keyboard, a few times it starts without a problem, but then the keyboard will not work if I put in password sometimes it will be repeated at least 5 start-up.

    I even tried running in safe mode with network and it is the first time that it would work at least 3 safe mode with network start-up. When I started it upward it said that windows has recovered from a stop down and he says one of the error is a blue screen.

    Hi DawnReneesReaders,

    1. were you able to reinstall Windows Vista without any problems?

    2 have you tried a Format installation?

    3. are you able to boot into safe mode with networking?

    Unplug all external devices connected to your system (except the keyboard and mouse) and check if it helps.

    If you are able to boot to the desktop in SafeMode with networking, then try to perform the following steps:

    You can perform a clean boot and check if it helps.

    A clean boot to check if startup item or services to third-party application is causing this issue.

    You can read the following article to put the computer in a clean boot:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    Note: Make sure that you put the computer to a Normal startup once you have completed troubleshooting.

    You can check the event viewer about what is causing the problem.

    Open event viewer

    What are the information contained in the logs of the event (Event Viewer)

    If you are able to boot into normal mode, visit the computer manufacturer to install the latest version of the drivers for the chipset, display, network, and other devices and see if it helps:

    Updated a hardware driver that is not working properly

    Update drivers: recommended links

  • Cannot use Internet Explorer and Windows Store, error messages "proxy server is unresponsive and we could not connect to the Bank.

    Original title: store in connection to wide band BSNL

    I browse the Internet via a broadband BSNL connection. I have no problem accessing internet through google chrome, but IE does not open web pages saying "proxy server is not responding", shop said "we were not able to connect to the Bank. This could happen because of the connection to the server or the connection timed out." How to solve this?

    Hi Laurent,.

    Glad to know the steps described in the previous post has helped you.

    To solve the problem with Windows Store, I suggest you try these methods.

    Method 1:

    Let's first try run the troubleshooter modern UI App and check if it helps.

    http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

    Method 2:
    If the problem persists, I suggest you make sure that the date and time are correct on the computer.

    (a) check the Date/time setting by selecting the tile of office , then left click on the date/time in the corner.

    (b) click change date and time settings. And then check zone is correct as well as the internet time tab has the ability to synchronize with the time server Internet.

    See the article for more information.

    What to do if you have problems with a soft

    http://Windows.Microsoft.com/en-in/Windows-8/what-troubleshoot-problems-app

    Hope this information helps. Answer the post with an up-to-date issue report to help you further.

  • Why has Windows Media Center Program Guide, an expiration date and is it possible to extend the updates of the information on the TV program?

    When I watched the recorded TV programs, I realized that no programs have been registered since May 1, 2012.

    When you open the program guide settings (settings:, TV: ProgramGuide) and watched part of the' Guide' he said start from 01/01/01, end date: 2012-05-01. So that explains why I get no updates.

    But someone how to get the subscription suite program listings or another way to obtain lists of programs TV in Media Center?

     
    Sign up/sign in to get the comments link.
     
  • When I boot Windows Vista I am prompted for a product key. I do not have the product key and need a replacement.

    my windows Vista does not work as I have bye my computer, and when necessary start CD NOT, that I found or keep more!

    Suddenly my windows Vista doesn't work like before? and when I start my computer, the display will show enter the number of CD and CD lost or found not .this who do I restart Vista?

    It is not a number of CDs.  It's a product key.  It came from Windows preinstalled on your computer find the COA sticker on the casing of the computer or in the compartment to batteries.  The product key is printed on it.  If you purchased your Windows on the Microsoft Store online, go to your bank account.  The PK will be there.

  • Satellite P200 - failed to connect to the Windows Services

    After starting Windows Vista on my Satellite P200, I received a message: failed to connect to any Windows Services.The event notification system file are not available.
    Use restricted to the mode of administration.

    No network supports either (wifi, Ethernet,...). At least I can use the PC in batch mode!
    Unable to retrieve a previous saved file system.

    I need to restore my Toshiba restore disk Win Vista?

    Do you offer a lighter solution?

    It's strange, but what you mean with batch mode?
    You can start in safe mode?

    I think the best way is to reinstall Windows with the recovery disk. It only takes a few minutes and then you have the new installation of Windows with all the drivers and tools of Toshiba.

  • The product key you entered will not work with this edition of Windows Vista. You must run the Windows Vista Setup program or enter a Windows Vista business product key

    Product key bad for the wrong version?

    Hello

    Recently the computer in business inherited from a friend, very fast and very good. Regardless of the operating system no - geniue, is with Vista Business, while the thumbnail of authentication is Vista Ultimate. I took a screenshot of what it says when I put Vista Ultimate product key: (it does not appear if you are unable to use it: P)

    http://S13.PostImage.org/57nfn5pqv/vistareg.jpg

    He said: "the product key you entered will not work with this edition of Windows Vista. You must run the Windows Vista Setup program or enter a Windows Vista Business product key."

    How would the installation of Windows Vista? My files would still be there when you need him? My drivers would still exist? No matter what to get deleted or become unusable? He would return to SP1? Any response is welcome.

    You can order form of the manufacturer's recovery media.

    The reason why the system as non-authentique shows currently is using a license in Volume KMS - these licenses must be re-activated at least every 6 months by connecting to the KMS user license activation server.

    It will require a reformat and reinstall whatever you do, unless you can connect to the KMS - Volume media server cannot be upgraded under normal conditions.

  • "The product key you entered will not work with this edition of windows vista. You must run the windows vista Setup program or enter a windows vista product key. »

    I bought a laptop HP three years ago in Dubai, now I am in India, my family problem does not activate windows vista and also use it now, I try to use but asked the system to activate product key not found the product key at the bottom of my laptop I enter the product key but the system says "the product key you entered will not work with this edition of windows vista.»  You must run the windows vista Setup program or enter a windows vista product key. "In my company sticker a HP laptop, it says" Windows Vista Home Premium, also found in computer ownership 'Windows Vista Ultimate' and as low property said: you must activate today and return their product ID: 89580-014-0000025-71152, but in my laptop near the product key, wrote a different number which is "89580-014-0000025." what is the problem and how to solve that advice me please. ""

    Hello

    You can use this Recovery Partition to reinstall Vista to his new condition with the right edition of Vista.

    This recovery partition was photographed on your hard drive by HP during the manufacturing of the factory.

    You press F11 on startup to start the process of recovering back to factory settings.

    Here is the information about HP.

    http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703

    If the recovery partition is damaged, you can buy HP's Vista recovery discs for a small fee.

    If HP's Vista recovery disks, you may need to try this instead:

    You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

    Other manufacturers recovery DVDs are should not be used for this purpose.

    And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

    Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

    "How to do a clean install and configure with a full Version of Vista '

    http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

    And phone Activation may be necessary when you use the above installation method.

    "How to activate Vista normally and by Activation of the phone '

    http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

    See you soon

  • How can I identify the name of the invisible file for a backup file successfully to an external hard drive USB2 separate? I use Windows Vista backup program (Service Pack 2),

    How can I identify the name of the invisible file for a backup file successfully to an external hard drive USB2 separate?  I use Windows Vista backup program (Service Pack 2), and I need to do backups plus two from other computers on the same external hard drive.  To do this, I think I would need to identify each backup file separate I know which file to specify if I need to do a restore.

    How can I accomplish this? The program does not seem to give me the ability to specify a file to which to write the backup during a given session files.  In addition, I do not understand why I can not see the file name in Windows Explorer - my files options are defined to be able to view hidden and system.  Would be grateful for any help you can provide, tonight if possible.   Best regards, Oliver for Norm

    Hello

    See this link:

    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-or-change-automatic-backup-settings

    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-programs-system-settings-and-files

  • Whenever I have shut down my system Windows Vista it makes 5 bets to day and ideas why this is happening

    Whenever I have shut down my system Windows Vista it makes 5 bets to day and ideas why this is happening

    Updates fail for a more likely reason.

    Check if you have errors associated with updates?

    1. Open Windows Update by clicking the Start button, all programs and then click Windows Update.
    2. In the left pane, click view update history.
    3. Find an update for Windows that has failed to install, and then double-click the update to view more information. Updates that have failed to install will display failed under status, next to the name of update.
    4. In the Windows Update dialog box, next to the details of the error, review the error code for the update has failed.
    5. Follow the links in the dialog Windows Update under more information or help and Support to try to solve the problem, then try to reinstall the update by using Windows Update in Control Panel or to display error codes/messages and maybe someone may be able to help others.

    Suggestion:

    How to reset the Windows Update settings?
    http://support.Microsoft.com/kb/971058

  • Windows Vista security alert sending indicating virus attack and does not allow me to get security alerts. How to bypass or disable?

    Windows Vista security alert sending indicating virus attack and does not allow me to get security alerts.  How to bypass or disable?  I have another anti-spyware (Kapersky) program that manages all aspects and indicates no virus found.

    I want to disable Vista, but it won't let me and the only solution it says is to download a update for a cost.  Help, please.

    The 'alert' is not from Vista. Your computer is infected by a rogue security program. It's called "thugs" because he pretended to be a good guy but is really bad. Don't pay them!

    Bleeping Computer has the removal of many variants of thieves here steps - http://www.bleepingcomputer.com/virus-removal/remove-antivirus-vista-2010
    You can also check for the stages of removal at these links:

    Bleeping computer removal how - to - http://www.bleepingcomputer.com/forums/forum55.html
    Malwarebytes malware removal guide - http://tinyurl.com/5xrpft

    Malwarebytes' Anti-malware (MBAM) or SuperAntiSpyware will often do the job. Both have free versions and you don't need to buy these programs.

    These can work for you, and all can be good. However, in many cases the computer will also infected with other horses of Trojan and protected by a rootkit. These machines are extremely difficult to clean. If your machine is one of these cases, either the interactive assistance to one of the specialty forums listed in the link below, OR take your machine to a professional on the local computer OR backup your data and do a clean install of Windows. It's your choice. I do not recommend using BigComputerStore/GeekSquad types of places.

    http://www.elephantboycomputers.com/page2.html#HJT-links MS - MVP - Elephant Boy computers - don't panic!

  • Connected with the temporary profile "I can't access all the windows apps or my personal files.

    OT: Connected with the temporary profile.

    When I log on my ASUS laptop, I tells me that I am being logged on with a temporary profile.  I can't access windows applications or my personal files.  It started after my laptop suddenly stopped while on internet explore.  According to the event log, event ID 4608 created a change of security status and it is logged when LSASS. EXE starts and the audit system is being initialized.  Is there anyway to stop this temporary profile/access and return to normal use?

    Many things in Windows Vista and Windows 7 is still applicable to Windows 8.

    Difficulty of a corrupted user profile

    http://mywindows8.org/fix-corrupt-profile-in-Windows-8/

  • I had a windows vista license, but it isn't working and I lost my recovery CD too, what should I do now?

    I had a windows vista license, but it isn't working and I lost my recovery CD too, what should I do now?

    Contact the manufacturer of your computer for a replacement (if available).

  • I have re-installed Windows Vista on my laptop (Dell Inspiron 1525) and now my wireless does not work.

    Hi, I have re-installed Windows Vista on my laptop (dell insparon) 1525 and now my wireless does not work. ive tried re installing driver, but it says operating system not supported. I used the disc that came with the computer of the re install and I even tried to install service pack 1. .

    original title: Wireless problems after install.

    I just tried both, the dell is one that says OS not supported"and the intel, it went very well, but my 'network controller' still have a yellow top thing in Device Manager. and I always wireless. any other ideas? Thank you for the help

    Question...  You have whatever it is listed in the "Network adapters" section of "Device Manager" now?

    While ensuring that the exclamation point is not for your wired network device (plausible) or bluetooth (plausible) and you just need to configure your wireless network to connect to * your * wireless network now.

    You may have to contact Dell to see why none of their drivers receive your wireless device works on the original operating system, what they included.  This could be a hardware problem PURE.

  • Vista problem: "failed to connect to the windows service, Windows cannot connect to the system event.

    I have reported this problem on my PC at home that connects to the internet. My laptop runs Vista Home Premium and I can't connect to the internet. I took my laptop on a trip, tried to connect to the wireless network that was free to the place we are. Could not connect, and after this initial test, the following is displayed after the start of "failed to connect to the Windows Service, Windows cannot connect to the system event notification service. This problem prevents limited users to logon to the system. As administratvie user, you can view the system event log to see why the service did not respond. "(have no idea how or what it means) when I go to the task bar you want to connect to a network, it is said:" the dependency service or group could not start"and if I go ahead and press"connect to a network"it says it can't find.  I search for computers on the network (who I'm sitting next to) and then try to diagnose the problem and it cannot. I have limited knowledge of this type of problem. Anyone have this problem and how to fix it?

    Hi ptkein,

    Thanks for posting your question on the Forums of Windows Vista.

    Option 1: You can download and install the latest network card drivers and see if that can solve the problem.

    Option 2: Follow the link below to fix network connection problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

    Option 3: Follow the link below to solve Internet connection problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

    Option 4: To verify if a third party application is a cause, follow this link (http://windows.microsoft.com/en-us/windows-vista/Advanced-startup-options-including-safe-mode) for this boot to the desktop using the safe mode with networking option and try to install the network. If the problem is resolved, you will need to perform a clean boot by following the steps in the following article to refine the exact source and isolate it: http://support.microsoft.com/kb/929135

    Let me know if it worked.

    Hope it will be useful.

    Thank you and best regards,

    Kadoch - Microsoft Support

    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for