Windows Vista couldn't run programs that worked on XP or Windows 2000. This famous problem in Windows 7?

Similar Questions

• Are there any programs that work similar to the old Adobe Pagemaker?

  Are there any programs that work similar to the old Adobe Pagemaker?

  Aldus Pagemaker, later Adobe Pagemaker were abandoned 12 years ago and since some of it is functionally distributed and shared between Adobe Illustrator and Adobe InDesign.

  If you are looking for something similar, Illustrator and InDesign will be the direct dead unless you have a copy of PageMaker running on an older operating system that supports

  After your choices narrow down to a few suggestions here

  http://www.MakeUseOf.com/tag/free-alternatives-Photoshop-Illustrator-Lightroom/

  and if you are looking for something more 'professional' look in the affinity Designer

  https://affinity.serif.com/en-GB/Designer/

  or QuarkXPress

• Why has a program that worked until today, all stop working pageburst 6.1, I need this program to make my Sam work help

  Hi I have a program that worked until today pageburst 6.1 for my school work and it just enough work I removed it and redloaded it, but still doesn't work don't not any ideas?  Thank you

  Hello

  There seems to be several ways to get support for this program.

  Start here: http://www.coursewareobjects.com/objects/evolve/E2/book_pages/technical_support/student.php

  Don

• Is the program that works with Wordpress?

  Is the program that works with Wordpress?

  Please take a look at the construction with Adobe Dreamweaver CC WordPress sites

• Can not run programs that require an internet connection

  My computer has been acting weird lately. I use the Zune marketplace and Playon for my PS3 and everytime I try to login or use programs that they say that they cannot connect to the server, or the bandwidth is low, even if I get 3mps. Even when I try to download templates for Microsoft word in the program or try to access my itunes store. I tried all the troubleshooting various tech support people have come to me as allowing programs on my AVG, disable my firewall, etc and even get rid of it completely but not luck. I can use internet very well and that you have run all the antivirus programs, spyware and malware, I and as usual everything comes out clean. I use a 2wire modem/router with AT & T DSL and I restarted and reset the unit. My wife can do it all on his laptop computer so computer m. My computer did something weird to the other day, he could get on the internet but then I got rid of my proxy and still, it was nice but my programs don't always work. I also called my ISP and there is nothing wrong with the line, but when I use the AT & T self support tool that it says that there is a problem with my connection even if he does not show it on their end. It is also said that my line, DSL and Ethernet status is down all what that means.
  I am running windows Vista 64 on a HP Pavilion m9340f.
  I'm OK with computers, but not great, and'd appreciate any help there ' All can give.

  Thank you!

  PS is there a good trustworthy program that I can download to search and solve problems like those that might help? I have Glary Utilities but that did not work...

  I feel like such a decoration, I disabled the proxy in firefox, but totally forgot to do in Internet Explorer. Thank you very much, everything works again.

• Error: CreateFile (C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\~e5d141.tmp I receive this error when opening certain programs that worked and now does not.)

  Original title: error: CreateFile (C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\~e5d141.tmp

  I'm getting this error when opening certain programs to work and now are not. I have studied this particular error and did not find a lot about it or how to fix it.

  I don't think it's a virus.

  I don't know what to do, I tried restores system, right click and run as administrator, I did ensure that allows the firewall thing and completely uninstall and reinstall.

  If you know a way to solve this problem it would be greatly appreciated.

  Delete all files in the temp folder and see if you still receive the error.

  Let us know if that helps.

• Cannot run programs that I used to use in windows 7

  I can't install or run LEGO Digital Designer and Kodu Game Lab

  Try compatibility mode:

  http://techingiteasy.WordPress.com/2013/07/08/using-compatibility-mode-in-Windows-8-1/

• I get a windows security alert. "application cannot be run. The file wuauclt.exe is infected. There is a virus program that opens asking me the task to solve my problem. What can I do to fix this?

  I don't know what to do.

  Please help me with this problem.

• Problem with a program that works just before...

  Hello

  (I'm a beginner!)

  I have a program of control 2 motors and collect the speed of each axis and the load between them.

  

  The equipment is working well (checked all sensors) and the program worked fine until 5 days...

  Now my problem is: I want to see the load in real time (using a digital indicator DBL linked to a DAQ Assistant coming to collect the data to load)

  AND in the DAQ Assistant (double-click on it) to see the real-time load when I use the button "START/STOP".

  

  but on the front panel, when I click on the button "RUN" indicator is just fix on the first value and does not have anything...

  

  I checked the connector between my DAQ and my IND N. and I changed the IND. N. and tried to update channels in my DAQ to see if the problem but nothing is fixed now... after 3 days on this problem

  Thanks if you can help me...

  A number of things.  I want to change the configuration of your data acquisition for the strength to be "1 sample (on request)", because it seems that you are just reading a sample whenever you pass through the loop.  I think that your other facilities DAQ need this also.

  I assume you use the speed of loop to control the sampling frequency of your acquisition of other data channels.

  Is all of your Outlander acquisition card or separate cards?  Some cards do not allow tasks or simultaneous acquisition.  I guess the DAQ assistant takes care of this.

  You can also take a look at the measure continues and model logging.  It may be well suited for what you're trying to work on.

• running program that I have not installed

  Windows 7

  Someone sent me a photo that has been copied from visualslideshow running on another computer.  I downloaded he considered what it is and saved it not knowing it wasn't a normal jpeg file.

  Now every time I turned off my computer, after the screen that says "of programmes - need to close ' etc, the image flashes on my screen and then the computer shuts down."  I tried to freeze the image so I could try to stop the program, but the best I could do was read "visualslideshow" in the lower right of the image.

  I did the following:

  1 remove the photo

  2 search programs for visualslideshow - has not found any reference to visualslideshow

  3 looked into services.msc services and msconfig,-has not found anything

  4. watched in the the Task Manager - applications and process - has not found anything

  5. virus software - ran no virus

  6 looked at Windows media player - no slide show or photo

  7 google everything I could think of

  8 went to visualslideshow.com and looked for a way to delete a photo/slide show running without the software installed - nothing

  9 tried to do a restore of the system twice but the restore will fail.

  I can't get the image to display any other time - only pop during the closing down.

  Anyone know what may be the problem and how do I remove this file permanently?

  Thank you.

  Mary

  I solved the problem.

  The picture was in these two folders:

  ~appdata\roaming\Microsoft\windows Photo Viewer

  and

  ~appdata\roaming\Microsoft\windows\themes

  Delete the picture and everything is back to normal.   (not sure how and why they got there).

  Files did not have the name of the original file, so were not not in one of the searches I did.

  Thanks for your help.

  Note: my application by e-mail at Visual slide show of support is left unanswered.

• Java 7 error "Unable to launch applacation" this happens with a lot of my programs that worked very well.

  does not start anything in the Control Panel, msconfig doesn't start, most of my programs which to start all now go to the Java 7 Error Message.

  Hello

  Were there any changes made on the computer before the show?

  The problem may occur if there is an incompatible version of Java installed on the computer.

  Method 1:

  I suggest you uninstall Java and try to re - install:

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  Check out the link for the download of Java:

  http://Java.com/en/download/index.jsp

  http://Java.com/en/download/FAQ/java_6.XML

  Method 2:

  Check the link and see if it helps:

  After the 6u33 or 7u5 Java version update, my application stops working.

  http://Java.com/en/download/help/clearcache_upgrade.XML

• I can't acess all programs, all I get is chosen the program that you want to use to open this file, nothing works, why is that thank you

  I'm done with xpantspyware on my Windows XP some how I seem to have got rid of it but can not acess my control panel or anything without this arise (chose the program you want to use to open this file) can not get my internet explore have micorsoft essentials there have scan and says no virus detected is not came with any disk so lost here, what I bring to the Dr, or can it be fixed thanks

  You might have a problem with your .exe file associations.  Try the "fix EXE file association" on the link below.  Be sure to read the note at the top of the page regarding the .exe, complications of the association.

  <>http://www.dougknox.com/XP/file_assoc.htm >

  HTH,
  JW

• Notepad programs that work well for helping it to write free Java programs

  Title says it all.
  
  Free searching of software, but those curious works best for programming in Java.
  
  Any help is greatly appreciated.
  
  Thank you!

  I guess you don't want to use a real IDE (Eclipse, Netbeans are free) because they muddy waters for beginners. If this is the case, I agree with you, simply use an editor with syntax highlighting. I use notepad ++, but I don't know if this is "the best".

• Search for open tabs of AwesomeBar using % in front of the term does not work in 35 FF. Is this a problem, or am I missing something?

  This procedure to search open tabs of reference for many pages, but only a new tab opens. I tried both cela url (address) bar and the bar of search without success without success. The AwesomeBar should be activated or is there something I am doing wrong?

  I found references to the operator percentage here:

  http://blog.Mozilla.org/theden/2012/04/30/Firefox-tips-search-your-open-tabs/

  https://plus.Google.com/+Firefox/posts/GFdB534oWEK (these two say that the operator will in front of the term)

  (But this clarified things for me)
  and in the page you quoted, lowest in "change the results on the fly

  If you are looking for a particular type of outcome, such as a bookmark or tag, you can speed up the process to find by typing in special characters [after] each search term in the address bar separated by spaces:...

  The results are quite specific.

  My problem was that I had no connection at all with AutoComplete and wasn't looking for results but instead pressing on enter. No wonder. These are some gems for my purposes. Thanks for your help Curtis.

• MSoft email that works with XP and Mediacom

  I have internet service Mediacome and used outlook or previous outlook express as my email. with my Windows XP Home Edition, SP3.  Now MCom said that they do not support these and I need a newer email like "webmail" or what works with Windows 7.  What e-mail program that works with XP I can use/get [I hope free] work with MCom?

  Thank you

  Hello

  You can try Windows Live Mail for Windows XP and check if that helps. Follow the link below.

  http://explore.live.com/Windows-Live-Mail-XP

  Hope that information was useful

  Amrita M

  Microsoft Answers Support Engineer