Windows Vista crashes and displays a screen saying "the program does not.

original title: crashing Vista

Hello

My Vista PC crashes. I think it has something to do with the screen saver, memory, HARD drive or energy economy. The accident appears as frozen screen and sometimes the program says State "program does not. I have tried different tricks like turning off screen saver, change the setting for power, HARD drive always 'on '... But no changes have so far resolved the issues.

I was not able to identify a single application or function as the source of my problems...

My Vista works very well, but if a leave as the computer and screen saver starts or the computer screen will energy efficient, it will crash when I "wake up".

I've updated the system and all the applications and drivers, but the system is still unstable and cannot be left for an extended period of time before this crash. As long as I'm working on the PC all works. If I leave my PC, I have to turn it off.

H. Hansson

Hello

Did you change your computer?

Method 1:

Step 1:

I suggest you check in safe mode.

Start your computer in safe mode

http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

Step 2:

If you are able to start your computer in safe mode, I suggest you perform the clean boot and check.

Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

To set up the computer in a clean boot, follow the steps in the link: How to perform a clean boot

http://support.Microsoft.com/kb/929135

Note: After checking in the clean boot, follow step: 7 article to reset your computer to normal startup.

Method 2:

I suggest you to see the link and check out the program does not.

What does it mean when a program is not responding?

http://Windows.Microsoft.com/en-us/Windows-Vista/what-does-it-mean-when-a-program-is-not-responding

Method 3:

I suggest to download and install the Microsoft safety scanner and run the scan and check.

http://www.Microsoft.com/security/scanner/en-us/default.aspx

Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

See also:

Ways to improve your computer's performance

http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-your-computers-performance

Optimize Windows Vista for better performance

http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

Tags: Windows

Similar Questions

  • Start Vista start up blocking guard down, the whole system is slow, internet keeps crashing and error blue screen occurs, System Restore does not

    Signature of the problem:

    Problem event name: BlueScreen

    The system version: 6.0.6002.2.2.0.768.3

    Locale ID: 2057

    More information about the problem:

    BCCode:                                              77

    BCP1:                                                   C00000B5

    BCP2:                                                   C00000B5

    BCP3:                                                   00000000

    BCP4:                                                   0AC90000

    OS version: 6_0_6002

    Service Pack: 2_0

    Product:                                              768_1

    Files helping to describe the problem:

    C:\Windows\Minidump\Mini061510-01.dmp

    C:\Users\Sony\AppData\Local\Temp\WER-89201-0.SysData.XML

    C:\Users\Sony\AppData\Local\Temp\WERF93C.tmp.version.txt

    You said the details of the error checking 0x77 - KERNEL_STACK_INPAGE_ERROR.  "This bug check indicates that the data page of the kernel of the required paging file cannot be read in memory."  The reason for the inability to read the data were "STATUS_IO_TIMEOUT' -"{Device Timeout} the specified on HS IO operation did not complete before the expiry time."

    Most likely, this could be due to a problem with the hardware, as a problem with your drive.  These details, combined with your description of the problem, further suggests that this may be the case. Check your event logs (Event Viewer in the in Control Panel Administrative Tools folder) to the messages relevant or notable.   You can also check the cables involving HD are nice and warm.

    As your hard disk may be involved, you want to ensure you had a backup of your data before doing large thing (a backup good and verified, is never a bad idea, anyway).

    Check the behavior in safe mode and the boot, as described below (follow the links):

    To treat blue screens, following general tips:

    Consider running chkdsk on all partitions.  Leave complete chkdsk on each partition and see if that helps.

    Also consider running SFC/scannow.

    If you start in safe mode, do you still feel bugs? What if you do a clean boot, or boot device?

    Consider the memory with memtest86 or Windows Memory Diagnostic test. Note that memory that pass the tests isn't necessarily good memory - he not only failed a review.  Examine systematically to eliminate the system RAM - run with a few modules for awhile and see how things are going. Then try the other modules.

    Other common suggestions include ensuring drivers are up to date (including video drivers), but also to ensure that you use the latest version of the BIOS.

    It may be useful to use the driver verifier.  To activate the... Driver Verifier start-> verifier.exe-> OK-> create standard settings - > then-> the names of the drivers select in a list-> next-> sort by provider-> select all non-Microsoft drivers-> finish and OK your way out of the dialog box.

    Then restart and use the system as you normally and wait for a problem.  In case the system does not completely start after activation of the Verifier, boot mode safe and run driver verifier and tell him to remove the changes.

    Wait for an error checking to happen after you have enabled the auditor as described and then transfer it to your SkyDriveand provide a link.

  • When I click on a tile (windows8.i) screen just flicks and the program does not open what went wrong and can I fix it?

    * Original title: opening with a tile on the start menu

    When I click on a tile (windows8.i) screen just flicks and the program does not open what went wrong and can I fix it?

    (Moved to customization and ease of access)

    I thought I made the text in a link from my mistake. Here is the page: solve the problems with an app

  • I bought and installed Photoshop elements 13. The program does not open says bur I have to register on my Adobe ID that I have. Then, I get a box saying I'm not online or my computor clock is out of adjustment. The clock is correct for the time and I have

    I bought and installed Photoshop elements 13. The program does not open but says I have to register on my Adobe ID that I have. Then, I get a box saying I'm not online or my computor clock is out of adjustment. The clock is correct for the time being, and I am on the line what should I do?

    See the link below:

    Photoshop elements 13 - can't get a response code in the offline activation method

    Re: I have uploaded a second copy of Acrobat Pro DC to my PC. By clicking on the icon gives your computer is offline or your computer's clock is set incorrectly?

  • When you try to import a .mp4 file in windows movie maker, the program does not list the file when I search for it in his file.

    When you try to import a .mp4 file in windows movie maker, the program does not list the file when I search for it in his file.  Help, please.

    As I suggested previously, conversion to a format like
    . WMV before you import it into Movie maker may be the solution.

    The free Converter from Microsoft can be a place to start:

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    Download Microsoft Expression Encoder 4 with Service Pack 1 (SP1) (freeware)
    http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24601
    (runs under WinXP SP3 / Vista / 7)

    When you install the program...
    Start Microsoft Expression Encoder 4
    (Start / programs / Microsoft Expression /)
    Microsoft Expression Encoder 4)

    On the "Load a new project" screen...
    Left click... "Transcoding project '...

    When the program opens, click on... File / import...

    (If at any time you get lost while browsing
    the program of... to... Window / active Reset
    Type or workspace... CTRL + SHIFT + R)

    Look for the file/s that you want to convert.
    (If files do not appear... open the fall
    window and choose... All files)

    Click (highlight) left the files and the left on the Open button.

    You can see the files in the "Multimedia content" pane

    In the right column... left click on the tab "Output"...

    Open the drop directory window and choose an output folder.
    (This is where you will find your converted file)

    On the left, click on the button "encode".

    Wait... video encoding CPU intensive and can
    be a slow process. It is always best if you do not have
    multi-task while files are encoded.

    Now... try import you again. File WMV in Movie Maker.

    More converters:

    There are to many converters available on the net...
    the following links are some examples. You can
    need to experiment to find the best result.

    Proceed at your own risk *.

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    (1) format Factory (freeware)
    http://www.videohelp.com/tools/Format_Factory
    (the 'direct link' is faster)
    (the file you want to download is: > FFSetup270.zip<>
    (FWIW... installation..., you can uncheck
    'all' boxes on the last screen... even in this case, it may
    install the Ask toolbar on your system)
    (Windows XP / Vista / 7)

    First, you will need to decompress the file or just open the
    Drag FFSetup270.exe out of the folder
    and drop it on your desktop. To install left click.

    (2) Freemake Free Video Converter (freeware)
    http://www.Freemake.com/free_video_converter/
    (Windows XP / Vista / 7)

    (3) Koyotesoft Free Video Converter
    http://www.koyotesoft.com/indexEn.html
    (2000/XP/2003/Vista/Seven)

    (4) Sothink Free Video Converter
    http://www.Sothinkmedia.com/video-converter/
    (Windows XP / Vista / 7)

    (5) hamster Free Video Converter
    http://www.PCWorld.com/downloads/file/FID, order 155794, 4 pages, 1/download.html
    (Windows XP, Vista, 7)
    (If you choose Custom Installation
    You can uncheck additional modules you
    do not want to install)

    (6) quick Media Converter
    http://www.Cocoonsoftware.com/
    (Win XP, Vista, Win 7 Home Premium)

    (7) SUPER © Simplified Universal Player Encoder & Renderer
    http://www.videohelp.com/tools/Super
    (the download mirror site is faster) (Windows XP / Vista / 7)

    (8) Xilisoft Video Converter
    http://www.Xilisoft.com/video-converter.html
    (not freeware but receives good reviews)
    (Windows XP (SP2 or later) / Vista / 7)

    Good luck...

  • Microsoft Fix Center 0 X 80092003 error message when you try to fix the hardware and drivers, the program does not work

    Microsoft Fix Center 0 X 80092003 error message when you try to fix the hardware and drivers, the program does not work. I use Windows Vista Home top.  Please provide me with a fix for this problem. Thank you

    Hello

    What type of material is actually causing the problem? Is there more information the Fix It center offers you?
    I would have a look at the article I have below the link and go ahead and run a update of Windows on the PC.
    I hope this helps.
  • After installed LR6, I firstly the Programm. Its audit of my ID. But then the program does not accept the button: Seriennummer prufen with a new window: no internet connection. But the connection is OK.

    After installed LR6, I firstly the Programm. Its audit of my ID. But then the program does not accept the button: Seriennummer prufen with a new window: no internet connection. But the connection is OK. So I can't start the program.

    Hello Siegmud,

    Wende Dich wie oben und some showers a cat den, denn

    Problembehebung für die Aktivierung und Deaktivierung > Stellen Sie sicher, dass eine zum includes Internet connection > werden (auch) displaying Fehler, wenn Ihr Computer nicht mit dem Internet ist clear (breast kann, dass) oder wenn er nicht vom Aktivierungsserver erkannt wird. Wenn are sich um einen Fehler im accordingly mit dem Aktivierungsserver all, set Sie sich mit each in connection. Halten Sie your Seriennummer bzw. Adobe-ID bereit.

    Hans-Günter

  • The first cc was going well until the last update you want to open and then throws a sign indicating that the application could not start properly (0 x 0000142) and the program does not open

    The first cc was going well until the last update you want to open and then throws a sign indicating that the application could not start properly (0 x 0000142) and the program does not open


    Hi Marcelo,

    You may need to check this: Re: Premiere Pro 2015 won't open after the recent update

    Kind regards

    Navdeep Pandey

  • I installed Acrobat 8 Professional 32-bit version and my computer is 64-bit, the program does not run correctly and I want to uninstall the 32-bit version and re-install the 64-bit version, I can't find the download of US feed for Acrobat 8 Professional,

    I installed Acrobat 8 Professional 32-bit version and my computer is 64-bit, the program does not run correctly and I want to uninstall the 32-bit version and re-install the 64-bit version, I can't find US downloading feed for Acrobat Professional 8, any suggestions

    Hello

    Please see below the link to download: -.

    https://helpx.Adobe.com/Acrobat/KB/Acrobat-8-9-product-downloads.html

  • I installed the download Assistant and she show Acrobat is downloaded, but the program does not run or listed as a program.  The only thing listed under programs is the wizard.  When I click on it, it gives me just the possibility to download Acrobat ag

    I installed the download Assistant and she show Acrobat is downloaded, but the program does not run or listed as a program.  The only thing listed under programs is the wizard.  When I click on it, it gives me just the possibility to download Acrobat again.

    Charlesgreen123 after the installation files are downloaded, you can run the Setup program to install Acrobat.  By default, the installation files are saved in your download folder.

  • Windows Vista starts with a black screen with the mouse cursor

    Hello

    I bought a new Toshiba laptop with OS Windows Vista from Best Buy. At time of purchse that Best Buy does not give me the Vista OS software, they said that the operating system is already installed in the laptop.

    Now, after a year, I have problems with the laptop. The Vista starts with a black screen with a mouse cursor. Before writing this issue, I searched some tips to solve the problem as

    (1) by pressing F8 while the computer is on and select it the option "last good known Configuration (Advanced) option." but it didn't work.

    (2) by pressing F8 when the computer is turned on, then turn on the option 'System repair Option', it did not work.

    (3) by pressing F8 when the computer is turned on, and then select the option "" safe mode / Normal mode option "Unfortunately she also did not work."

    Could you get it someone please let me know how I can solve this problem.

    Thanks in advance

    If Safe Mode does not and you do not have a Vista DVD from Microsoft, do a repair disc to do a startup repair, etc.:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use:

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

    There is no Vista free download legal available.

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

    See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

    Normally, you have to press F10 or F11 at startup to start the recovery process...

    Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Also ask them if it is possible to make the recovery disk/s since the Partition of recovery in case of hard drive failure or System Crash, when you're up a new drunning.

    They will tell you how to do this.

    Every computer manufacturer has their own way of making recovery disk/s.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
    A good Vista DVD contains all versions of Vista.
    The product key determines which version of Vista is installed.

    There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

    If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    http://support.Microsoft.com/default.aspx/KB/918884

    MS advice on the conduct of clean install.

    http://www.theeldergeekvista.com/vista_clean_installation.htm

    A tutorial on the use of a clean install

    http://www.winsupersite.com/showcase/winvista_install_03.asp

    Super Guide Windows Vista Installation

    After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

    See you soon.

    Mick Murphy - Microsoft partner

  • Windows Explorer crashes and get this error in the event log: maximum number of ATI EEU session has been exceeded

    Windows Explorer crashes and it is what I have in my event log. Can anyone help?

    Exceeded maximum number of ATI EEU session

    Hi TodFranklin,

    1. when exactly you receive this error message?

    2 did you do changes on the computer before the show?

    Follow the suggestions below for a possible solution:

    Method 1:

    Step 1: Start in safe mode and check if the problem persists.

    Start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

     

    Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

     

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

     

    Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 provided in the above article.

    Method 2: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

    The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

     

    Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

    Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

    Let us know if that helps.

  • Windows Vista (32 bit) stops responding after installing the program...

    Hello.

    Recently, my Dell XPS M1530 (Windows Vista 32-bit) has been extinguished during the execution of the system updates (we had a power outage during the night and I didn't) and would only start in safe mode. I moved all my documents on a portable HARD drive and reinstalled the operating system to try to save the computer.

    After I did that and reinstalled the drivers (downloaded from the Dell site via my system identification label), I started to load my programs on it (Adobe, Microsoft Office, etc.). After I install a program and exit the installation window, Vista stops responding. I can't click on the Start button (the mouse will go over it, but it does not allow me to select) or one of the other button I have in my toolbar. I can't click anything in the Dock of Dell at the top of my screen, either.

    The only way to turn off the computer must press and hold the Power button until the laptop turns off. I HATE doing this, but there is no other way to turn it off once a program has been installed.

    Any thoughts on what is happening here? I hope this is just some kind of error on my part - I can't afford to get a new machine. I wanted to upgrade to Windows 7 (my machine can handle), but I don't want the same problem occurs.

    Thanks for your help in advance!

    Hello

    As you re-installed Windows and the problem persists the rules well enough software. The power
    failure should be accompanied by a power surge or other that has caused a problem in the computer.

    Makes it sound like there are hardware problems that can probably be repaired. Have you looked at the system
    by a real computer store (not the leeks and the glances at a Best Buy or other stores) or Support of Dell.

    Dell support
    http://support.Dell.com/

    Dell support drivers - product manual & warranty Info (left side) - and much more
    http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

    Dell forums
    http://en.community.Dell.com/forums/

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Impossible to upgarde to Windows 8, impossible to get as it says the resources is not available

    Original title: info

    I have an older laptop running windows vista and am looking to move to the window of 7 or 8. I made an assist for 7 upgrade and was allowed to upgrade to windows 7 Home Edition, update tired help 8 and can't as it says the resources is not available. looking to see what are my options that I don't know where to find the online on microsoft Windows 7 download,

    Any assistance would be an incredible help.

    Thank you.

    Depends on your area just look at system builders channel

    There is no more upgrade to just clean the installation DVD

    http://www.Amazon.com/Windows-premium-System-Builder-packaging/DP/B00H09BB16

  • Windows VISTA BIT missing Modules! Updates to the installer will not work.

    MY windows progam (and several other installation programs) will not work.  I went down to the BITS service does not.  I found several remedies that include restarting or re-configuration of the service.  However, when I try to start to change the service in the Control Panel, I get a message that the modules of BITS are not!  Can my BITS have been removed?

    Note: I had my living room PC to eliminate an infection particularly bad virud - perhaps they removed too?

    Pavillian Mediacenter HP with Windows Vista Edition Home Premium (x 32)

    Thank you, DRC

    Hi DCassie,

    1. Have you tried the 940520 full KB?

    If you have not completed the Ko 940520 try the full article and check if it works.

    If the article does not help then to recover a corrupt service, you will need to perform the repair installation of Windows vista and the Windows vista disc, you cannot perform repair installation.

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • monitoring software

    Hi all - when I insert a plug-in effect to an audio track in Logic Pro X, I hear only the audio not transformed during the recording, but the audio processed at reading later. I've got "monitoring software" checked in the audio preferences. What bone

  • Satego X 200 - 21U: questions to restart Vista because of the inconsistency REALTEK

    Hey all,.I ve you have a huge problem that I hope can be a little one to solve. The thing is that, after a stop for my laptop and one attempt to restart normally, a black screen tells me the following: For Realtek RTL8111B / 8168B gigabite Ethernet C

  • Satellite A500 - problem with Touchpad (or OS?)

    Hi all I had my laptop on standby (Windows Media Center on the bottom) and when I opened the screen upward, the touchpad did not work, as follows: * On the desktop: the cursor is moved on the screen as usual tap or left click does nothing until you r

  • HP CoolSense missing - please help

    Hello I'm running a DV6 - 6156EA laptop computer with Windows 7 64 bit operating system. A few months ago, I had problems with HP Support Assistant does not work after it was updated.  David PK tried to help me a lot to solve the problem.  However it

  • How to transfer data from a DLL Delphi pascal class to a LabView data cluster?

    Hi all I have the following problem: I use a dll written in Delphi Pascal to transfer data to LabView by using the "Call library function node". My Delphi dll contains this class: TFlash = classFi: TFileInfo;constructor Create;procedure LoadFi (Filed