Windows Vista crashes, I get the 'Blue screen of Death' and I have to restart. Different errors each time it crashes.

Windows Vista crashes, I get the 'Blue screen of Death' and I have to restart. Different errors each time it crashes. I tried to reinstall vista without success of the problem being fixed

Hello

Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.

http://www.NirSoft.NET/utils/my_event_viewer.html

-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.

Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
http://www.winvistatips.com/disable-automatic-restart-T84.html

-------------------------------------------------------------------------

Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

As examples:

BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002

or in this format:

Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

It is an excellent tool for displaying the blue screen error information

BlueScreenView scans all your minidump files created during "blue screen of death," collisions
Displays information on all the "crash" of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.html

BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
system installed by the manufacturer.

This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

You can try a system restore to a point before the problem started when one exists.

How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

-------------------------------------------------------------------------

Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

Enter this at the command prompt - sfc/scannow

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

-------------------------------------------------------------------------

Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
smile, as well as of other major device drivers.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

How to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

-------------------------------------------------------------------------

How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
http://support.Microsoft.com/kb/958233

Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htm

Understanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692

Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033

-------------------------------------------------------------------------

In some cases, it may be necessary.

The Options or Vista recovery disk Startup Repair

How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.html

This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

I hope this helps.
Rob - bicycle - Mark Twain said it is good.

Tags: Windows

Similar Questions

  • Windows Vista-used to get the blue screen with the error on it. Re-installed Vista and the programs one by one w/restorations. Now, I get the blank screen minidump file blue w/error after reboot and...

    I find the minidump files and tried opening them and could not. Files and downloaded programs of debugging appear in the program. When I try to open them I get "you must be an administrator to open" insofar as I know that I am the administrator because supposedly everything I need is another administrator account. Also my restore will pass in a few days, and the box is no longer available. Also had an error on my printer files so I removed them, but as I (after) that I pressed the firm PC, the blue screen appeared and had to turn it off manually and of course got the minidump error message when I started again. If at this point, I'm still waiting to see if deleting the files printer helped. Any information would be appreciated.

    OK, I'll look for your next post with minidump files.

  • Installed the network updated drivers hp support page now I get the blue screen of death

    Installed the network updated drivers for my laptop hp support page and now I get the blue screen of death a few minutes of Internet usage.

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = on & CC = US & DLC = in & sw_lang = & Product = 5171...

    I can reboot the computer, but it only works for a little bit before again becoming the blue screen.

    I tried to download and reinstall the hp 8 drivers network twice now. (Product number: QJ793AV-#ABA)

    I am running windows 7 (x 64) and downloaded all the updates as well.

    Any help would be greatly appreciated.

    I made an another windows update and seems to be ok for now

  • I get the blue screen of death, I do before going to the Geek squad?

    I get the blue screen of death, I then close my pc and restart in safe mode and then trouble shoot. I can then restart normally and then it is fine for awhile. I don't always have to be on the internet to get the blue screen. I have AVG and super anti-spy ware and run full scans and they say that there are no threats. So what else can I try?

    Messages you receive when you restart the computer, more a review of the event viewer should help you determine what is causing the BSOD.  The BSOD is not necessarily related to malicious software.

    You have posted in the forum for the forum of anti-malware for Microsoft Security Essentials (MSE).  Since you're using AVG, your post is off-topic for this forum.

    You can expect from a forum moderator move your message or if you want to, you can seek assistance in search and/or post in the appropriate Forum Windows:

    http://answers.Microsoft.com/en-us

    Kind regards...

  • Why do I get the blue screen of DEATH most of the time when I try to print on my HP Office Jet printer?

    Why do I get the blue screen of DEATH most of the time when I try to print on my HP Office Jet printer?  Almost everytime I try to print to the printer HP Office Jet m I get the Blue Screen of Death in the middle of printing or shortly after that my document is printed.  I then have to shut down my computer and restart it.  I am running Windows 7.

    We need the log files themselves (called a DMP files) because they contain the only record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.


    Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at here

    If you have any questions regarding the procedure, please ask

  • HP Pavilion DV9600US video hangs and get the blue screen of death, hardware video message fails

    If this can help others! I have a HP DV9600US it works well but then screen freezes hot flashes and crashes or re-boots or gives me the blue screen of death. Spent hours updating the drivers and the latest NVIDIA drivers without change, all the tests and diagnosis appear normal. When I open IE 9 it hangs then crashes sometimes at the office, tried to change the parameters of res and nothing has worked. I assumed I had a bad video chip. NOT. This all started I thought with IE 9, I changed all the settings of Internet Explorer.

    Here's what I found to solve the problem and I hope this can help, DO NOT updating auto or manual for the new drivers or NVIDA video Windows CE is the cause, I downloaded from the site to shape the 2008 NVIDIA driver HP and rolled, problem solved. I am running Windows Vista 32 bit.

    I post that hope, it helps others and records the days/hours of attachment and not update recommended to the latest drivers that actually caused the problem in the first place. I guess the lesson learned if it works LEAVE IT ALONE.

    Good luck

    Please mark as resolved so other users can see this theard includes a fix for the problem

  • Whenever I start my computer, I get the blue screen of death. I'm not getting in what concerns the opening of session and there is no prompt to start in safe mode. Whenever I start my computer the error code and message on blue screen are different.

    I have Windows Vista Home Premium. I was on the internet when my computer screen turned blue and a message told me that a problem has been detected and Windows has been shut down. He said that I had tried to do something with memory executable not executable (I don't have a note of the code). He said as he poured out memory. Now, whenever I start, the blue screen of death gives me different messages and different error codes. Today, he says:

    IRQL_NOT_LESS_OR_EQUAL

    and codes of error STOP: 0x0000000A (0x0000001B, 0 x 00000600, 0x810A90B0, 0x00000001).

    PC World say that they need to reinstall Windows, but I have some really really important files on there that I have not supported (I know, really stupid on my part) and they said they cannot guarantee their recovery. Is there another way to fix it?

    I've been on the forums and suggestions involve me to be able to connect to my computer. Blue screen hits me before I can log on, and there is no prompt to start in safe mode.

    Thank you very much!

    Try this to save your data:

    Data recovery:

    1. slave of your hard drive in another computer and read/save your data out there.

    2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

    3 Alternatively, use Knoppix Live CD to recover data:

    http://www.Knopper.NET/Knoppix/index-en.html

    Download/save the file Knoppix Live CD ISO above.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://isorecorder.alexfeinman.com/isorecorder.htm

    Download the Vista software from the link above.

    After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

    Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

    Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.

    Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

    When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

    Click on the icons of hard drive to open and to understand which drive is which.

    Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

    Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

    See you soon.
    Mick Murphy - Microsoft partner

  • When I print, I get the blue screen of death.

    I'm running an Asus U47A, intel i7, 8 GB of ram.  Bought a printer cheap for the College, the printer HP Deskjet 1000 J110a (printer of $ 30 million).  Please don't tell me I'm cheap and I should have bought the model upward, it would not be useful.  Whenever I have print or the print job will complete successfully, either during the print job, my PC will crash and gives me the blue screen of death.  What should I do? I uninstalled the printer drivers, reinstalled them, check the updates, and install them directly from the HP site... you name it.  I am ready to throw my head through the wall because I need to print frequently and having my computer crash in the middle of a document is not what I need.

    Any help would be greatly appreciated, thank you very much.

    In addition, the issue may be the iusb3xhc.sys:

    Bugcheck 1E, {0, 0, 0, 0}

    WARNING: Unable to verify timestamp for iusb3xhc.sys
    ERROR: Module load completed but symbols can be loaded for iusb3xhc.sys

    The iusb3xhc.sys, which is dated December 5, 2011 is an Intel USB 3.0 driver.

    Try to update the iusb3xhc.sys by installing the next update:

    http://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=21129

    The same error was reported by other users, as in the following link:

    http://www.SevenForums.com/crashes-debugging/236644-BSOD-mostly-when-printing-photos-Ntoskrnl-exe-iusb3xhc-sys.html

    If the error persists, try the printer on another USB port such as the USB 2.0 port.

    You might also uninstall the Intel USB 3.0 driver and let the USB ports operate at 2.0 speed as which seems to have stopped errors blue screen in the link above for a user.

    Also, another printer, not necessarily a more expensive, but a different brand or model may not exhibit the same problem.

    You might try using a printer if possible.

  • I tried "Remapping ACTIVE" in BIOS > Advanced tab in my Windows 7 Pro 64 bit, 8 Gb RAM (3.24 usable) computer and get the Blue Screen of Death.

    My computer is

    Intel Core i7 860 @ 2.80GHz processor
    Installed RAM 8 Gb (usable 3.24) - G.SKILL RIPJAWS, DDR3 1600 GB PC3-12800 2 x 4 sticks.
    System type: 64-bit
    Motherboard: ASUSTek Comp Inc.  Model: P7P55D
    BIOS Date: 2009-12-07 Ver: 08.00.15

    Operating system: Windows7 Professional 64-bit Service Pack 1

    GeForce GTX 275
    Tried "Remapping ACTIVE" in BIOS > tab advanced, then restarted and the system was fine and kicked + 100%
    (Checked system properties - display of 8 GB of RAM installed perfectly usable)
    then stop.  Then restarted the system, but after the system attempts to restart I get "Blue Screen of Death" - unstable system and "Dumping Memory.  So now, he is off again.
    Necessary assistance in this regard, been looking for solution for a while.

    Dear Gerry,

    I think I solved my problem.

    I have reset the motherboard and CMOS by removing the battery.

    I now get on my system properties
    -installed memory 8Gb and (usable 6.99)

    Thanks for your help once again.

  • I get the Blue Screen of Death on my computer.

    Original title: Blue Screen Of Death

    A brief description of your problem or your question under the title: I am faced with the BSOD

    Complementary in the body description The owner of this computer said that it does not have anything or noticed something that can cause the BSOD move every time the computer is turned on. It takes a minute or more for the computer down, it loads correctly and the office and each program can be used before it crashes.

    Error messages that are displayed.

    Is it repeatable? It always happens. I don't have to open or something to make it happen.

    Include a description of your system, it should include information that you can find using the basic tools ( Speccy & Belarc( )

    The operating system  Windows 7 Ultimate Service Pack 1 (build 7601) 32-bit

    The processor, orCPU 2.60 GHz Intel Pentium G620, 64 kilobyte primary memory cache, cache 512 KB secondary memory, 3072 KB tertiary memory cache, ready for 64-bit, multi-core (2 total), only not hyper-thread

    Thevideo card ?

    The amount of RAM memory 4.00 GB, 3.40 GB usable

    Other devices HID compatible con device
    Control del compatible con & HID device
    Entrada (x 3) USB device
    Teclado [Keyboard] HID device
    Compatible con mouse HID
    Concentrador raiz USB (x 2)
    Compuesto USB device
    USB storage device
    (X 2) Generic USB hub
    Volumen Generico Snapa

    If a particular software package is the question understand the developer and version number.

    Particularly important.  What Malware (Anti Virus) you are using and what version.  I don't know at the moment, I am currently in Mode safe.

    DMP and MSinfo32:

    http://1drv.Ms/1RsSWJw or

    https://onedrive.live.com/redir?RESID=70C323F259998CA5! 1962 & authkey =! ACBVNJzmO3eqehM & ithint = the file % 2czip

    The minidump file showed a KERNEL_MODE_EXCEPTION_NOT_HANDLED_M (1000008e) stop error caused by the eamonm.sys:

    BUCKET_ID: 0x8E_eamonm+ 1487f

    ekrn.exe is the process that crashed.

    The eamonm.sys and the ekrn.exe are components of ESET NOD32 antivirus.

    As the eamonm.sys seems to be an older version try the NOD32 update to the latest version.

  • In Windows Xp SP2, I get the blue screen error KERNEL_DATA_INPAGE_ERROR

    Technical information:

    STOP: 0XC0000007A (0XC000000E, 0XCB6D59A13, 0XC02DB564, 0XC57671860)
    PortCls.sys - AddressB6D59A13 base at B6D3F000, DateStamp 40574e49
    Beginning physical memory dump

    Your plant is associated with a low-memory exception.  It's either your Ram, or more likely a driver.  You have some very old drivers including 2007 ESET.  I would like to update the drivers below AND update of Service Pack 3

    BIOS.sys 16/03/2005 02:23:52
    C:\windows\system32\drivers\eamon.sys 2007-12-21 03:17:22
    fetnd5.sys 07/20/2001 07:40:24
    ParVdm.SYS 17/08/2001 16:49:49

    How to find drivers:
    -Google search for the name of the driver
    -compare Google results with what is installed on your system to determine on what device/program, it belongs to
    -Visit the web site of the manufacturer of the hardware or program to get the latest drivers (do not use Windows Update or Device Manager Update Driver function).
    s ' there is difficult to locate them, post back with questions, and someone will try and help you find the right program

    The most common drivers are listed on this page: driver reference

    http://www.carrona.org/dvrref.php

    -Driver manufacturer links are on this page: http://www.carrona.org/drvrdown.htm

  • I delete everything on my computer and start all over again, but don't know where to start. I have tons of viruses and get the blue screen of death.

    My computer specs are:

    Windows vista edition Home premium
    service pack 2
    System
    Manufacturer: zoostorm
    model: 45CMX VP series M3
    32 bit

    http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall

  • My office shows the blue screen of death and then restarts automatically. What should I do?

    Problem event: BlueScreen
    The system version: 6.0.6002.2.2.0.768.3
    Locale ID: 1033

    The BCC code: 3B
    BCP1: 00000000C 0000005
    BCP2: FFFFF80002B423A0
    BCP3: FFFFFA600A6DDF60
    BCP4: 0000000000000000
    OS version: 6_0_6002
    Service Park: 2_0
    Product: 768_1

    Hello
    1. when exactly you will receive the error?
    2. you remember any changes made to the computer before the show?
    3. What is the exact error message received when the problem occurs?
    Step 1:
    You can disable automatic reboot, and check if it gives you an error message:
    See the following article to do the same thing:
    Startup options (including safe mode)
    Step 2:
    Most blue screen errors stop 0 x 0000003B occur due to faulty hardware drivers, you may need to update the drivers for the hardware of the computer manufacturer, and check if it helps solve the issue.
    I suggest you return the item mentioned below.
    Updated a hardware driver that is not working properly
    Also check out the following link and check:
    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
    In addition, you can also download the minidump files so here experts can analyze the cause of the error on a blue screen.
    See use SkyDrive to upload collected files and post screen shot/image
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65
    Let us know if it helps!
  • I get the blue screen of death whenever I try to play a video - regardless of the source (you tube or CNN). Instant death! I tried to reinstall Adobe Flash player. Any help would be appreciated, if not his return to IE...

    Blue death screen / system crash when you try to play the video or to copy an image from the internet

    On further study, please do not go on the road to perdition as I trod.

    However, to do this: go to http://www.adobe.com/software/flash/about/ and right CLICK on the logo that is being charged. THEN: Navigate down until "settings", click it, and you should have the choice: "disable hardware acceleration". NOTE: If you do NOT have this choice, study the icons down quickly: on MY screen, the left-most is an icon that looks like a video monitor: click on it and give you the opportunity to "disable hardware acceleration".

    It works, if you can get it done before you get a BSOD! AND do not take the life of your computer in your hands by updating your video drivers. I do not really recommend doing that!

  • Installed Windows 7 on my netbook but keep getting the blue screen while surfing Web sites

    Hello!

    First of all, this is my first post time on these forums, I often read them and think they are great!

    Now on to my question, I recently installed Windows 7 on my LG x 110 netbook. I ran the windows Upgrade Advisor 7 and confirmed that my netbook managed to all the minimum requirements for a 32-bit install. After installing Windows 7 my pc works perfectly (better than XP in fact) has installed all of the drivers needed to run automatically unless the driver for my microphone and my 3gs integrated internet which I managed to resolve. The only problem I have is sometimes while surfing the web, I get the blue screen of death and my netbook restarts. I was not able to understand by myself am so regarding this forum hoping to repair... I contacted LG for information on downloading upgraded drivers, but got a response from them saying that my pc is not supported with drivers for windows 7. Here is some information from the Center problem with Windows 7, I don't know if it's necessary info, please tell me where to find the correct information and how to access it.

    Problemsignatur

    Information additional om problemet

    BCCode: c2

    BCP1: 00000007

    BCP2: 00001097

    BCP3: 8078AE94

    BCP4: 8078AE74

    OS version: 6_1_7600

    Service Pack: 0_0

    Product: 256_1

    Bucket ID: 0xc2_7_RTL8187Se! PlatformFreeMemory + 1 b

    ServerInformation: 47840a85-d17f-4bd7-8fa5-f385071573a0

    Any help is greatly appreciated as I really want to re - install Windows XP because Windows 7 runs so well, even on a low technical specifications.

    Handelsenamn: BlueScreen

    OS version: 6.1.7600.2.0.0.256.48

    Sprakvariant-ID: 1053

    It seems that you have a C2 Bad Pool Caller error, which is difficult to analyze without the minidump file.  If you googled around and find WinDBG, you can open the minidump file.

    Look for the line: nom_image: it will tell you exactly what file has caused the error.  If all goes well, once you find exactly what caused the error, you can search for updated drivers/software.  At first glance, I would say it was the Realtek drivers because you see the line RTL8187Se in your info.

    My MSI Wind U100 netbook works also Win7 perfectly.  Double boots with MacOSX too, just because I wanted to see if I could do it.  I change the hard drive (for a bigger) and added the RAM.  Nothing low spec thereon compared to what was needed for WinXP when it came out!

    Try this driver, it should do the trick.  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PFID=40&level=5&Conn=4&ProdID=172&DownTypeID=3&GETDOWN=false&downloads=true

    And since this is the NETWORK/connection wireless card driver, he explains why the errors come during surfing!

Maybe you are looking for

  • Disorders of the printer: () 0

    I have a HP Officejet J6480 all-in-one printer.  It is no longer offers me the possibility to print in draft mode on anything except documents created with Microsoft Office.  So, everything I print directly from now Internet printing (emails, Google

  • Account of Yahoo messages periodically disconnects

    Using Messages in OS X El Capitan 10.11.3 on a MacBook Pro 15 inch, mid-2014 w / 2.5 GHz Intel Core i7 (retina) and 16 GB of RAM, my Yahoo account periodically disconnects in Messages without any intervention on my part. By selecting 'Available' in t

  • How can I convert 9213 readings of TC in temperatures on FPGA?

    I use a cRIO-9076 with 9213 module to capture readings from thermocouples (type K).  Is it possible to convert these readings (voltage of the FXP Data reading) in the temperature on the FPGA values?  My goal is then to use these temperatures to contr

  • DO NOT DOWNLOAD ITUNES VIA IPOD TO MY PC

    Dear Sirs, I have no idea really how to articulate my problem. I'll try though. A month ago I had, a problem with my pc. When you plug in my ipod. He's not all right on itunes... it does not open the message, it's that I encountered a problem.  Const

  • error 2118 - E4200V2 Media prioritization tool

    Excuse my English, but it is not my mother tongue. I have a problem with my Linksys when I try to set you up the E4200V2 Media prioritization tool. The error is: "Unexpected error". 2118 There was an unexpected error. If the problem persists, visit o