Windows Vista does not load. I just see a black screen with cursor.

Similar Questions

• Windows 7 does not load, is sitting on a black screen with the mouse arrow.

  I loaded several times and even used the repair option still does not load past this screen.  Looks like it should be on the page of actual windows, but nothing.  Have to restart the computer at this point.  He will continue to try to reinstall windows 7... cannot use same cause recovery F10 it says something about a partition... I have no computer!  What is going on???

  Hi all

  Thanks for posting. If I understand your messages is correctly appears that your facility will not start even to load. If this is the case, then you probably bad media. I would either re - burn your DVDs at a slower speed. If you got your DVD with a company I contact the seller and request additional media.

  I hope this helps!

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Computer laptop Windows 8 does not load in front of a black screen. Any ideas?

  My Windows 8 portable (only 6 months) does not load it just starts with a black screen after it has passed windows screen load. Last thing I did on the laptop was an update of the system. Unable to get into safe mode or anything just stuck on the black screen with the mouse cursor. Can anyone help please?

  Hi Stewart,

  Did you do changes on the computer before the show?

  You can follow these methods and check if it works:

  Method 1: Unplug all external devices connected to the computer except keyboard, mouse and monitor and check if the problem persists.

   

  Method 2: If the method above does not help, then you can follow the steps in the below mentioned Microsoft article and check.

  Windows 8 starts with a blank screen after a standard or hibernation

  http://support.Microsoft.com/kb/2756559/en-us

  Thank you. Please come back for any clarification on this or any issue of Windows. We will be happy to help you.

• Why Windows Vista does not load user profile?

  When logging on it says unable to load the user profile, but the profile is there when I log in Administrator account, how do I recognize my account that I used to use? Everything worked fine until I went to reboot my Dell Vosstro 220, running Vista SP2 with all latest updates... He went to the Startup Repair, and after awhile, I was dirrected to restart the computer. When it restarted, it went to a temporary user profile named after one it starts normally, but there was 3-0 and temp after the profile. So the desktop icon were almost all gone and when you run a temp profile nothing is saved in it when you use... I've logged on to the administrator account and under C:\computer\users my account, I used to use with 2 temporary accounts. One was exactly like my normal account (mountain), but with temp000 after her. I went to Microsoft Answers and he said to go to regedit and find the profiles under machine\software\microsoft \windows NT\profiles and change the name of the supposely accounts 2 so it would not load the Temp account. I followed the instructions to a T and everything is OK except that now it does not load the Temp file, it just says: windows could not load the user profile. I have to hit Control, Alt, delete to bring up the Task Manager and then type Administrator and password that works very well. When I click on administrator, it displays the screen with all that on the computer. MountainMan used to be there under administrator, but he disappeared. If I go down to users in a subcatigory under computer and users it lists all of the accounts that I should be able to access. All the information is there, it doesn't seem right to see as an account profle to load up. I've always had it set to start on MountainMan account without password. Now it takes forever to load the administrator account. It must also be typed in each time instead of remember accounts. How can I get MountainMan load again? The info is there, but he doesn't seem to know the location more. Even when I type in MountainMan it just says unable to load the user profile. I don't know if typing in the name of the account is the same problem or if I have 2 problems. I appriciate any help to correct this situation. Also just FYI, I deleted temporary files after changing names, in which case they were confusing.

  Hi James,

  1. When you created a new user account, have you configured it as an administrator?

  2. When you connect to the old user profile you are able to view your data?

  You can check out the following link and check:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-files/how-do-i-change-folder-and-file-permissions/465f2b42-63dd-4486-8dd1-c870290efeed

  The above link contains third party links.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  For more information, please consult the following link:

  Troubleshoot "access denied" when opening files or folders

• Windows Vista does not load all the black white backlit display.

  I'm repairing computer of my aunt. It's a laptop gateway M-6320. Windows Vista. It loads the bios and goes through the MAIL. After the POST, it just goes to a screen backlit black white with no mouse and nothing happens.

  Tried to change the boot order to boot from the cd first and put the disc of windows 7 in to run a repair (I don't have a vista cd), but it does not always load. everything sounds like it turns on and works fine. the dvd sounds like it runs for a few seconds. I also tried to boot from usb with windows 7 there. still won't load what it is. I took out the battery tested cmos it is 2, 5V. I think it was. still nothing. I left the computer for a whole night. still nothing. I changed the hard drive even though it sounds like it's working. still nothing. I even tried a windows xp cd in the freak chance, it was a bad cd. and nothing is connected to the computer while I'm trying to start. He's not going for advanced options or to try safe mode.

  I also tried to put the memtest on USB, but it will not load anything from him even with usb as the first boot option. and I tried different usb drives also.

  I can't figure what's wrong... my only thought is that the bios is corrupted or the RAM is bad. Anyone have any ideas? Oh and the bios is Phoenix

  Hello

  Since you've already tried all the troubleshooting steps, including booting from a Windows 7 disc to repair the Windows installation. If all else fails, then I think that
  It's a hardware problem. I suggest you contact the manufacturer of the laptop computer or take it to a tech store to get help.

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit ourMicrosoft answers Feedback Forum and tell us what you think.

• Windows Vista does not load, can not use Safe Mode, etc.

  Computer/laptop: Dell Inspiron 1525
  Running: Windows Vista

  I hope someone here can understand this, but it's a pretty serious problem for me for two days now.

  Two days ago I started my laptop that I normally have.  I did insofar as the office, and then once I tried to move my cursor autour, nothing happened.  Instead of using the cursor, navigation with the keyboard, I tried once more, nothing helps.  Everything was just frozen.  I didn't think much at the time, because I thought maybe it was just one of those random freezes, restart the computer fixed.

  But my problem got worse.

  After the next reboot, my computer is doing as much as the black screen with the Green loading bar with the words "Microsoft Corporation" under it... and where he remained for more than 6 hours.  It's exactly what it does whenever I restart the computer.  Just in the limbo of the permanent load.

  I held F12 on boot to the top and ran a diagnostic test, which revealed nothing wrong.  I tried all the options under F8, including all variations of Safe Mode, and once more, nothing has worked.  Even more frustrating is that the computer could not even finished loading command prompt when I tried "Safe Mode with command prompt."

  The only clue I've gotten so far was a blue screen randomly with a single line of text that read something like: "'STOP: c00000033 object name invalid ." "

  Essentially to: nothing works, and I not made any changes to the computer itself, between the time he was working, and now when it is not.  It loads just for as long as I leave the computer running.

  Help or light on this subject would be much appreciated, as the thought of losing everything on a computer, I've had for almost two years is quite upsetting.

  Hey Maverick 104,

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: Try (method 1) system restore and repair the startup (method 2) as indicated in the link below:

  Your computer may freeze or it may restart to a black screen that has an 0xc0000034 error message after you install a service pack for Windows Vista

  http://support.Microsoft.com/kb/975484

  Step 3: Start the computer to system recovery options (follow the steps mentioned in the link below) > select command prompt tool and run Check disk to repair bad sectors on the hard disk.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

   

  At the command prompt, type chkdsk /f and then press ENTER.

  Now, type chkdsk /r , and then press ENTER.

  Note: CHKDSK would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  Let us know if it works

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Update of Windows Vista does not start - remains just white

  I have a new computer with Windows Vista Home Premium installed. I have updated the computer with windows updates by using the Windows Update tool.
  However, it has stopped working and I can no longer get updates or visit the update page.  I know that there are updates to install but when I open windows update, the schedule is displayed but there is nothing in it.  That is to say: in the browser bar, it says: > Control Panel > Windows Update, but the window is otherwise empty and nothing loads.  I have no error messages.  I tried to close the program, but it does not and I have to close it using Task Manager.  I also rebooted the computer several times and tried to leave for an hour or two, but still nothing happens.

  How can I update my computer?  or even reinstall windows update?  I think that the program is may be defective...

  Hello Christopher,

  I'm sorry that you have problems with your Windows Update. It takes a little the pleasure of having a new computer isn't?

  Try a few bugs, starting with the easiest:

  In the Vista Start Menu Search Bar, type run and press ENTER.

  Then, type the following, one after the other and click OK after each.

  regsvr32 jscript
  regsvr32 vbscript
  regsvr32 /i mshtml

  I hope it will work for you. If this isn't the case, you can try the following:

  Note: The following assumes that you have, or have access to the
  original Vista 32 - bit .iso or can otherwise use the file
  in the .iso image file install.wim.

  1. place the original Vista .iso image file on your hard drive.
  2 extract the iso install.wim.
  3. extract all the files from c:\windows\system32\wu*.* install.wim.
  4. place all the excerpts wu *. files in their own folder, for example, C:\wu for
  later use.
  5. run start, all programs, accessories. Right click on command prompt
  and click on run as administrator.
  6. go to your System32 directory.
  7. to replace current wu *. files in the System32 directory.
  you will need to first ownership of each of them as follows:
  Run: takeown /f "path and name ' [note: I ran this command for]
  each of the wu *. [* files, one at a time]
  then
  Run: cacls 'path and file name' / g : F
  8. replace all the wu *. files using those c:\wu
  9 save each of the original wu*.dlls in System32 - for example
  (regsvr32 c:\windows\system32\wuapi.dll)
  10. reboot
  11 place Windows Update in manual mode as a test and run it.

  If please post here and let us know if this helped.

  Thanks Dave D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Impossible to load windows, just get a black screen with cursor

  I restarted my computer and now Windows will not load. It happens on the screen says 'Windows' in the bottom with green bars. Then it goes to a blank screen with a cursor to work. I left alone for a bit to see if she would just take a while to load and the screen saver came, that works, but I cannot get it on my desk.

  -nothing has been installed recently

  -Tried to reboot in safe mode (cannot enter safe mode)

  -Tried to restore to previous points

  -Tried CTRL + ALT + DELETE (does nothing, can't pull up the Task Manager)

  Hello

  A blackscreen can be very hard to fix. It's my generic convenience store which some you already have
  has tried.

  One to try:

  "C:\Windows\System32\winevt" in this folder is an another NEWSPAPER named one

  Rename the folder of NEWSPAPER LOGSold and restart the computer.

  'C:\Windows\System32\winevt\Logs'-> 'C:\Windows\System32\winevt\Logsold '.

  REN C:\Windows\System32\winevt\Logs C:\Windows\System32\winevt\Logsold

  You can try in a Command Prompt of a disk of Vista or a recovery Partition if you can't navigate to
  the actual winevt file.

  -----------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1
  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
  manufacturer will sell them at low prices.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (to do the system restore there only to)
  being bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows Vista will not start up - keep getting the black screen

  I read through the questions answered similar questions and still can not past the black screen with windows vista.  It's on a dell inspiron 1525.  Also, it does not start in safe mode and I tried booting from the last good configuration and is still stuck on the black screen.  This just started a few days ago, and the computer was working fine until this date.  Can you help me?

  Hi Jimazona,
   
  1. from when are you facing this problem?
  2. any change in software or new hardware on your computer?
    
  Method 1:
    
  First of all I suggest you to disconnect all devices external one except keyboard and mouse and try to start your computer and check.
       
  Method 2:
      
  I also suggest you perform a startup repair and check if this solves the problem.
     
  Follow the steps below:
     
  a. Please insert the Windows Vista DVD and restart the computer.
  b. when we are asked to press a key to boot from the DVD, please press enter or the SPACEBAR.
  c. Select your language settings, and then click Next.
  d. click on repair your computer.
  e. Select the operating system you want to repair, and then click Next.
  f. in the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem, and if necessary, it may restart your computer, because it makes the repairs.
   
  Access the link below for more information on the Startup Repair:
  Startup Repair: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions
   
  See also:
   
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/24b44a01-872e-4d87-867f-ed01a3579031/   
   
  I would like hearing that the results back on your part about what happened after trying each method.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think. 
  

• Computer HP laptop window vista does not load please help

  someone asked this question and I have the same problem!

  I have a laptop HP who have dirtied pre-installed Vista and for some reason after installing automatically 3 updates the other day, he is not now charge up. The laptop is plugged in so it can configure 3 updates without failure (due to something like battery dying).

  When the laptop turns on, it gives me two options:
  • Start the reboot system (recommended)
  • Start Windows normally

  If I click on 'Launch Startup Repair', he comes back to do the same screen with them two options and when I click on "Start Windows normally", the laptop everything restarts and then return to this screen.

  Thus, F8-ing it does not help either - it gives me options like computer repair, Mode safe mode, last known good, etc... but none of these helped either.

  I looked around online for a solution, but most say on the use of the Vista installation CD, but the operating system is installed on a partition on the laptop (also there are files on what I would come down)... However I do not know if I can get it to boot on the installation partition either

  I tried F8, F11, F12 and nothing works

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Vista does not load on Equium P300-16t?

  Help!

  P300 for my daughter does not windows once a CF (containing only JPEG Images) flash memory card has been inserted into a USB port and removed when starting up.
  I get a windows error recovery page that says a recent hardware or software change is prevents the loading of windows.
  Two options are given 1. Repair launch 2. Start windows normally. Neither will launch windows.
  I can get the "safe mode" screen when I press F8 at startup upward. When I try to start in safe mode it hangs just after 10 seconds or more.
  I can access the BIOS screen by pressing F12 and default configuration value. Always not load Vista.

  I have lost the discs to restore that have been made on the first day, and there is data on the hard drive that has not been saved! So I hope that there is an easy solution for this.

  Hello

  I doubt you could disable in the BIOS.
  But you can check if a USB option in the BIOS that would help you to disable USB ports.

  Otherwise, you could try to reinstall the operating system by using the disk HARD recovery option.
  FIR this press F8, and then choose computer repair mu, then choose HDD Recovery.

  But this process will format the C partition and you lose the data that was stored on C

• Profile of user in windows vista does not load, what should I do?

  The family member profile, will not record could you please put a solution to this promblem.

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• a yellow triangle with a critical problem message, windows vista does not load on a computer laptop dell studio

  Vista Windows failed to load on a dell studio laptop, the message appears with the critical error message, but then the screen turns white after auto restart, no loading of windows. What can I do

  http://support.Dell.com/support/eDOCS/systems/WS340/en/UG/DIAGS.htm

  Try the above balance sheet of Dell Diagnostics, using F12 to start this process.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You can also follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  See you soon

  Mick Murphy - Microsoft partner

• Windows Vista does not load

  my windows vista computer will not start, when loads of computer it offers the ability to start windows normally, if I try that it loop back to the error message, the other option which is startup repair does not work properly, the repair start gives me the option to repair the operating system, but the operating system does not appear on my screen , and the other option it gives me is to delete all my personal documents. I tried to access safe mode but it does not give me the possibility of and I have an anti virus that scans everything that I have download. I don't got no recovery disk when I bought the computer and I don't have back ups for my computer because when I tried the computer would not be complete. I don't think I have recovery points on my computer because they do not work properly when I tried to be

  Hello

  Before we get this problem resolved, I'd appreciate it if you could answer the following questions.

  (1) have there been recent changes to the computer before the show?

  (2) what is the message error full pull you while you try to load in Normal mode?

  I suggest you follow the given steps and later a update on the State of the question.

  Method 1: Check if the problem is caused by some faulty devices on your computer. I suggest that you disconnect all external devices except the mouse and keyboard to your computer and check if you can able to boot.

  Method 2: What to do if Windows does not start correctly: http://windows.microsoft.com/en-US/windows-vista/What-to-do-if-Windows-wont-start-correctly

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Note: Try all the steps except the re - install the Windows Vista operating system.

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• I recently did an update of Windows on my laptop and now I get a black screen with cursor in the upper left, how to fix this?

  I can't believe that I trusted to Windows updates. Why what happened? I restarted my computer several times so try to press F8 and NOTHING. Microsoft pays for this correction? I seriously need to know what the * happens.

  Hello

  1. what happens when you tap F8?

  2. are you able to get the menu advanced startup options?

  Please follow the methods mentioned in the link below.

  Method 1:

  Try to start the computer in safe mode.

  Click on the link below.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If you are able to start in safe mode, please perform clean boot.

  Click on the link below.

  http://support.Microsoft.com/kb/929135

  NOTE: after the troubleshooting steps, please return the computer to start as usual (see STEP 7 the above link)

  Method 2:

  Try to perform the last good known Configuration using the link below.

  Using the last good known Configuration

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  Method 3:

  Also unplug all third-party hardware devices connected to the computer except the keyboard and mouse.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  See also the below mentioned link.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly