Windows Vista does not recognize my DVD player. It is a Pioneer DVD - RW DVR - 110 d ATA Device.

I looked at the information system and noted that there is a device error.  After checking for a solution online, this is the message I got:

Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 39.

Hello

Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.

Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.

Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit

The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461

When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052

Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems

CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/

Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems

Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.

Hope these helps.

Rob - bicycle - Mark Twain said it is good.

Tags: Windows

Similar Questions

  • Satellite L30-105 (PSL33E) Windows Vista does not see the DVD - ram UJ-850 s

    Hello

    I have a Satellite L30-105 (PSL33E) with windows Vista. Windows Vista does not recognize the DVD - ram. BIOS recognize DVD-ram. I tried to download the drivers for the DVD-ram, but they are not on the side of Toshiba.

    Who can help me to get the right driver or learn more? Problems with the carpet * a DVD-ram uj-850 s ATA device and windows Vista.

    Hello

    The CD/DVD drive needs no special drivers!
    Vista includes a Microsoft driver that works with all CURIOUS s (CD/DVD drives)

    Simply said, the Vista should recognize the drive without any problems.

    A few questions; did you get any error messages? What is the status of Device Manager? Do you see yellow exclamation points?

    There is an old way to correct a similar drive problem. It worked on XP then try it on Vista OS.
    It of necessary to update the registry entry
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    1. click on the start menu.
    2. If it is a Vista machine in the search box type regedit without quotes.
    3. look for the registry key mentioned above.
    4. in the right panel you'll see something along the lines of UpperFilter and UpperFilter you want to click on each key filter and tap on delete. Click Yes when asked to confirm if you want to delete the key.
    5. restart Windows.
    6 let me know if it works.

  • Windows Vista does not recognize my Ipod Touch

    Windows Vista does not recognize my Ipod at all. He even appears in Device Manager. I know that is not my USB cable because it is new, and it isn't my Ipod because it works on Mac computers. I just need someone with expertise to help me get my computer to recognize my Ipod so I can go back to enjoy my music.

    Hello

    MTP mode for WMP11 sync - mode MSC to treat the MP3 as a reader. So you have set up in the MTP.

    -----------------------------------------
    If necessary:

    Tips for solving problems of USB devices - and a Mr Fixit
    http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

    Make sure that Windows is updated appropriately that there have been several USB updates.

    1 check that the driver letters for them, for a player, if the drive of the default drive letter is changed, what is happening.
    Mine was h: I added a device that took H: and the player stopped. So I put it back to H: and the other
    device to J: and everything worked again. If necessary start - type in the area of research-> disk management find top
    -Right-click on it - RUN AS ADMIN

    Don't forget to remember the MP3 must be set to the PSG to sync with WMP, and meteorological service of Canada to copy and delete files
    and update the firmware.

    If no joy follow these steps:

    You may need a powered hub. (all the USB ports on your computer are not powered, often only 2)

    Try these:

    Make a Restore Point

    Control Panel - Device Manager - click in the empty area - VIEW - show hidden devices

    Here, your devices are the MP3 player.

    Now look everywhere EXCEPT the USB controllers for your devices (cannot be found) and if you find
    It RIGHT CLICK and UNINSTALL all.

    now go to the USB and UNINSTALL ALL controllers in the category, but the category itself.

    APPLY/OK

    RESET

    This refresh battery USB and hopefully it will allow the unit to install. (You may need a powered hub)

    Here is the similar procedure under XP, Vista is the same, except that we need clear specific devices, as appropriate.
    http://support.Microsoft.com/kb/310575

    This is a utility to help you, but do 1 above.

    USBDeview is a small utility that lists all USB devices currently connected to your computer, as well as all USB devices that you previously used. Run Options and check the 1st three choices to see if one is there.

    http://www.NirSoft.NET/utils/usb_devices_view.html

    You must remove all instances of the devices and restart.

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • Vista does not recognize my dvd ram drive, or a drive__Windows hard usb cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

    Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

    Error message when you open Device Manager and clicking on the dvd player. Drive does not appear in the window 'computer '. Max_devices downloaded, but it couldn't fix the problem.

    Hello

    19 code means there is a driver conflict such as two devices attempt to use the same resources.

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps and happy holidays!

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Windows XP does not recognize my DVD players after uninstalling Norton 360

    After uninstalling Norton 360, my Windows XP-based computer does not recognize my CD-ROM/DVD-ROM drives.  Tried to reinstall drivers without success.  Clicking on driver, I get a drive not installed message.  Using the Manager, have uninstalled and reinstalled the drives without success.

    Try following the steps under "Windows XP" in the article following the MS KB:

    http://support.Microsoft.com/kb/982116

    These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

    Create a System Restore Point beforehand and restart the computer later.

  • Windows Vista does not recognize my Canon powershot A710IS

    Recently tried to download photos for the first time in a few months and the USB or the SD card reader worked. The USB works for other things such as Chargers, printer, etc. Under Device Manager there is no option for a digital camera. My laptop does not recognize that anything has been plugged. Help, please!

    Recently tried to download photos for the first time in a few months and the USB or the SD card reader worked. The USB works for other things such as Chargers, printer, etc. Under Device Manager there is no option for a digital camera. My laptop does not recognize that anything has been plugged. Help, please!

    ===================================
    Maybe your AutoPlay settings need to be adjusted.

    Windows Vista - Troubleshoot AutoPlay
    http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

    Windows Vista - AutoPlay: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

    Windows Vista - How to change the auto run settings
    http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

    The following items may be worth a visit:

    (927836) a still digital camera is not recognized
    in Windows Vista or in Windows XP
    http://support.Microsoft.com/kb/927836/en-us

    Windows Vista: Using the scanner and Camera Installation Wizard
    http://grok.LSU.edu/article.aspx?articleid=10705

  • Computer Windows Vista does not recognize the USB mouse

    Original title: does not recognize usb devices... Im trying to use the mouse... got a new mouse... still does not recognize it

    worked but stopped, got a new mouse and still does not recognize it. I really need it... help please

    Hello


    1. do you get an error message?
    2. would either not detected other USB devices in the same port?

    Method 1: perform the steps in the article mentioned below and check if the problem persists.
    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

    Method 2: run the Fixit and see if the problem is resolved.
    http://support.Microsoft.com/mats/hardware_device_problems/en-us
     
    Method 3: update the chipset drivers and see if the problem occurs.
    Note: you must contact the manufacturer of the computer to update the chipset driver.

    Hope this information helps.
  • Windows Vista does not recognize my external hard drive, Eagle Consus AND-CS2PSU2-BK

    I have an HP Presario laptop running Windows Vista and it does not recognize my external hard drive, or my flash drives.

    I have an external hard drive Eagle Consus AND-CS2PSU2-BK.  It worked fine on my desktop, which works on XP.  I plug it to my computer laptop and nothing.

    When I plugged it in the first place, he says that he needed to download the drivers.  I clicked 'ok' to automatically download drivers and a few seconds later, he said that it successfully completed the driver download/install.

    I look under the drives in my computer and he's not here.

    I went to start, right click computer, left you click on Manage and double-clique then under storage disk management.  All I see are C drive and recovery disc (D).  No other drives displayed.

    I exitted who and set up the Control Panel, double click on Device Manager.  He said in the other topic peripheral USB to ATA/ATAPI bridge.  I don't know whether or not it is my external hard drive.  It indicates the Type of device: Other Devices and under device status it says: "the drivers for this device are not installed. (Code 28).  This operation requires an interactive window station.  To reinstall the drivers for this device, click on reinstall the driver. »

    He asks if I want to reinstall the drivers, so I clicked that.  He couldn't find them / install them.

    Still, I don't know if USB to ATA/ATAPI bridge is still linked to my external hard drive.

    Help, please.  The same thing happens when I try to plug a flash/USB.

    Try this:

    In the right click 'USB to ATA/ATAPI bridge' Device Manager under the other devices section, click unsintall or press the delete key. Reset with the connected hard drive it must be reinstalled, but under the USB controllers. Make sure the device works on the other computer cable can also go to bad.b

  • Windows Vista does not recognize the removable storage device

    ISSUE INITIAL 2010-03-03)
    Here's the scenario:
    1. Insert the card compact flash.
    2 computer recognizes the removable storage (that is, it is assigned a drive letter and appears in disk management).
    3. use the icon remove the device safely in the taskbar to stop the machine to remove safely.
    4. remove the card compact flash.
    5. Insert the compact flash card.
    6. the computer does not recognize removable storage (that is, it is not assigned a drive letter and does not appear in disk management).

    The only way I can get windows to recognize the drive is to restart my computer. How can I get windows recognize the drive without having to reboot?   This problem does not occur with USB flash drives.

    Windows Vista Hame Premium, 64-bit, Service Pack 2 operating system

    UPDATE (04/03/2010):
    I have more information, I hope this helps to reach a solution.

    -J' repeated the steps above 1 to 3, with open Device Manager.  In step 3, in the Device Manager window, the icon for the question USB mass storage device becomes the exclamation point in yellow triangle icon.  Check its properties on the tab "General", in the "Device status" box, it says: "Windows cannot use this hardware device because it has been established for"safe removal", but it has not been removed from the computer. (Code 47)  IX this problem, disconnect the device from your computer and then reconnect it.  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »
    -J' then removed the card and rest of the error state.
    -J' I re inserted the card, and rest of the error state.
    -J' I then tried to update the driver by accessing the tab "driver", click on "Update driver", click on "Automatically search for an updated driver", and the result was "the best driver for your device is already installed."

    I found the solution on this hp web page:
    http://h10025.www1.HP.com/ewfrf/wc/document?DocName=bph07910&tmp_task=solveCategory&LC=en&DLC=en&cc=us&product=3876397&lang=en#N1074

    Basically, it says NOT to use the function "remove the device safely.  Instead, just right-click on the drive in the Solution Explorer, then choose "Eject".  Works perfectly.

    Some excerpts...
    "Memory card readers are devices that use the icon remove the device safely in the notification area in the taskbar). Do not click stop in the window, remove the device safely. Doing so can disconnect the card memory reader for Windows. In this case, restart the computer to reset the memory card reader. »
    "An alternative to the restart of the computer is to use the option optimize for fast moving functionality in Windows.

  • Windows Vista does not recognize the graphics card and the broadband

    Original title: recognize the graphics card and the broadband connection

    Windows vista can't recognize the graphics card and the broadband connection in the Dell laptop

    Hi mfadhelmu,

    1. When did you start to question?

    2. you remember to make changes to the computer before this problem?

    3. you receive messages or error codes?

    4. have you updated all device drivers?

    You can try to launch the Fixit and see if it helps:

    Hardware devices do not work or are not detected in Windows

    http://support.Microsoft.com/mats/hardware_device_problems/

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Windows 7 does not recognize the DVD drive! HELP need before March!

    Guys, my DVD drive was wrking a few weeks now, it's not. Windows 7 does not detect it shows in my computer or Device Manager it isn't freeking.

    Although, when I start my system, I checked it in the BIOS and it has been detected. So please help me! I need a solution before March 2012...

    Hello

    Do you know if there are major changes or downloads or something like that to the computer until the reader has stopped working?

    Have you tried a system repair on a date where the car worked very well?
    http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  • Windows 8 does not recognize my DVD player.

    I read all the suggestions given and I tried the over only once, but it does not always work. What should I do next?

    Hi Alma,.

    Please answer the following questions to help us get a better idea about the issue.

    1. What are the troubleshooting steps you have tried?

    2. Since when are you facing the issue?

    3. do you get an error message?

    Controls if the DVD drive works properly in the Device Manager.

    To do this, follow these steps:

    a a.. on the desktop, press the Windows key + R and type devmgmt.msc and press enter to open the Device Manager.

    b. expand CD-ROM/DVD-ROM drives and do a right-click on the driver.

    c. Select Properties , and then check to see if the device works properly under Device Status.

    Is there a yellow triangle with an exclamation mark inside, then it indicates that there are some problems with it.

    Follow these methods and check.

    Method 1:

    I suggest you to run the hardware and devices Troubleshooter that will tell us the reason behind the question.

    Follow these steps to run the hardware and devices troubleshooter.

    a. press the Windows key + W and type Troubleshooting.

    b. Select Troubleshooting.

    c. Select show all in the upper left corner.

    d. run the convenience store hardware and devices.

    Method 2:

    I suggest to refer to the following article and follow the steps. This article has steps to add a registry key so that the operating system detects the DVD player.

    You can see that the DVD drive is not recognized in Windows 8

    http://blogs.technet.com/b/asiasupp/archive/2012/03/22/you-may-experience-that-DVD-drive-is-not-recognized-in-Windows-8.aspx

    Registry WARNING: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. Follow these steps to resume and restore the registry.

    a. go to start and type regedit.

    b. Select regedit and then right click on the screen.

    c. click on run as administrator.

    d. find and click on the key or the subkey that you want to back up.

    e. click on the file menu and then click export.

    f. in the area Save in , select the location where you want to save the backup copy to, and then type a name for the backup file in the file name box.

    g. click Save.

    Get back to us with the State of the question. We would be happy to help you.

  • Windows Vista does not recognize the CD

    Windows Vista has ceased to recognize my driver CD - good player, good good Bios everywhere but keeps ejecting discs that will play in the other computer and they played on this one.  Please help - at the end of my tether.

    Won't play CD

    Hello

    1 did you software/hardware changes to your computer before this problem?

    Try to solve this problem automatically by clicking Fix I have in the articles below:

    Method 1:

    Update the Firmware on the manufacturer's Web site.

    Method 2:

    To resolve this issue automatically, click the fix this problem link. Then, click run now button from the Automated Troubleshooting Services page and follow the steps in this wizard.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

    http://support.Microsoft.com/kb/314060

    Hope this information is useful.

  • Windows 7 does not recognize a DVD-R disc

    I tried to delete the driver software and let it reinstall it from the software disc and the internet, and still does not work properly. Help, please!

    Acer-5349-2695

    DVD Super Multi DL driver

    Windows 7 Starter

    Intel inside

    Go here to see what I mean what happens when I pop a dvd - r in my dvd - r multi recorder/RW/CD/DVD/DVD-RW/CD-RW/DVD-r/CD-R, DVD player of (d :)) Photo dvd - r driver, I burn a movie on this drive and this is what I get every time I have burn things movies) mp3 on dvd - r I bought Sony DVD - r and that's what I have: http://i1275.photobucket.com/albums/y450/eteck2/2013_04_11_-_1_FullScreen_zps9c9905f0.png

    PLESE HELP!

    Hi Enoc,

    Your CD or DVD drive is missing or not recognized by Windows or other programs, so you cannot play or access a CD or a DVD. This issue would have occurred after you installed, uninstalled or updated a program or you updated Windows.

    Otherwise, this issue may occur if one of the following conditions is true:

    ·         You upgrade the computer to Windows Vista or Windows 7

    ·         You install a service pack Windows

    ·         You install or uninstall a CD or DVD recording program

    ·         You uninstall Microsoft Digital Image

    Try to run the corner store convenience store and check what the problem is and fix it accordingly. I suggest you to refer to the help article and check if it helps.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

    Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
    http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

    It will be useful. Back to us for any problem related to Windows. We will be happy to help you.

  • Windows Vista does not recognize external USB 260 GB HARD drive

    I have a 260 GB Seagate external hard drive, a laptop Toshiba satellite and Windows Vista Basic.

    The same Windows usually choose the hard drive when I plug it, it does not appear in Device Manager and in disk management, the only way I can get it to work is to uninstall all the USB root hub and then restart the computer, and then reinstall the USB root hub and plug my hard drive.

    When windows finally recognizes him, the only way to find the driver must choose c:\ manually and there's the search for the computer.
    Works for the time that I have the computer hard disk, but when I stopped it, next time I use the computer, I'm having exactly the same problem.

    I tried to remove the hard drive safely and then close the computer and by him plugging back in after windows has loaded, I tired it connected from the computer and tried to close the computer with connected.

    None of these work.
    Can someone help me please?

    Strange?  :|
    But what need s say Microsoft Windows so I don't expect 100% without bug OS ;)

    Disconnect the USB HDD and remove all the USB ports and Device Manager USB controllers. After restarting again the OS should reinstall ports. Then you could try to reconnect the HARD drive.

Maybe you are looking for

  • Equium L10-300 - Question about BIOS password

    Hey all hope you can help a new user please. Had a customer to put in a notebook Equium L10-300. Somehow has been a password on the BIOS and start-up, so I can't do anything with it. I can't boot from a CD and I tried a USB floppy drive, it seems to

  • Lost start-up password How to unlock?

    Just Boot F11 bleeps; F8 and F5 work but other Fs all asks for a password. Please tell me how to unlock! It's a Dell x 300 and lost service tag; cannot afford to help Dell Tech Thank you Aviva

  • OfficeJet 6700: Officejet 6700 Automatic Document Feeder failure

    I bought a 6700 Officejet of staples in August 2014. It worked perfectly and I used it to scan several years of bank statements using the ADF on the top of the printer. I have not had any problems up until October, when I tried to quickly copy a docu

  • G6 2228dx (Windows 8)

    I read the most recent computers without key Windows has the key embedded in the BIOS.  I ended up losing the disc that came with the laptop so now I need to download and reinstall windows 8 (because I had to replace the hard drive) anyone know where

  • HP Envy 120 prints duplex on all multipage documents

    When you print multiple pages, it is always in duplex mode. How can I disable this feature? Using MS Word. The system is 10.8.4 The printer is Envy 120.