Windows Vista does not start after Windows update

Similar Questions

• Windows Vista does not start after installing Linux OS

  original title: Windows Vista does not start after the installation of the Linux OS... Help!

  I installed Fedora 10 Red Hat Linux on my HP laptop and now each time it powers on, I can't do vista windows at startup.  Goes directly into Linux.

  I need to get back to normal.  Any help would be appreciated.

  I installed Fedora 10 Red Hat Linux on my HP laptop and now each time it powers on, I can't do vista windows at startup.  Goes directly into Linux.

  I need to get back to normal.  Any help would be appreciated.

  Hey Oscar Jose

  Download the correct ISO file and make a disk bootable from the link below

  Then use the Startup Repair option when you start from

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  or at startup press F11 to start the process of restoration of hp and see if you can reinstall vista from the recovery partition and place your machine, back to the way you bought

  warning you all data loss and 3 third-party programs that you have installed unless there is a non-destructive option in your hp recovery options

  Thirdly try to ask in a fedora forum to solve the problem, he has caused

  http://fedoraproject.org/

  Walter, the time zone traveller

• 5 CC of Lightroom does not start after 2014 update.

  5 CC of Lightroom does not start after 2014 update. Mac OSX 10.8.5. Tried the suggestion to sign out of cloud of Adobe and reconnect. Also restarted computer. No luck. Photoshop CC 2014 seems to have installed perfectly. Can not install the previous version either, can still find Adobe cloud. Tried to re - download from the Adobe web site, but that's where saying 'Download now'-, but nothing is downloading!

  Thank you, this was not the problem for me. Both have been set read/write. Finally, I downloaded the "demo". It installed fine and seems not to be re-registered.

• Vista does not start after I disabled the service DCOMLauncher

  Hi all.   I really hope that someone can help me with this, because I can't use my computer at all, and I have to use a notebook different to write this post.

  The problem: Windows Vista does not start with the normal settings or Mode without failure.   To be more precise, after Vista starts, he has only a black screen and a limited mouse functionality.

  The background & problem: I use Windows Vista Home Premium SP 2.   I have disabled the DCOMLauncher Service using the program Autoruns from Sysinternal.

  What I tried: I tried to start Vista in Mode safe with no result.

  Thanks to all those who are trying to help me.

  When you choose Safe Mode choose last known good startup.

  As long as your subsequent boots are deemed unsuccessful, which is perhaps not the case, this will start the configuration before using Autoruns.

  Safe Mode command prompt works?

• Windows does not start after the update...

  Hope someone can help with this,

  I just installed the update sp1 for my computer for Windows Vista Premium Home dir all installed with no problems, but when I restarted my pc, Windows wouldn't start. The only thing that is on display is a black screen with Windows Error Recovery on top, then he said "Windows does not start. A recent hardware or software change might be the cause. I tried to restart it in different ways, but nothing. Then he said: I have to insert my OS drive to try to fix, but that's not even start. Everyone knows about this problem? This has happened right after that I installed the update...

  L.Butler,
  Are you able to boot from your Vista DVD or recovery partion and run the Startup Repair tool?  If you do not have a Vista disc so make sure that your computer is configured to boot from the CD drive before booting from the hard drive.  Once you start with support for Vista select the "Repair your computer" option and first run "Startup Repair".  If that is not correct the problem then boot with Vista support and select the option "System Restore" and choose a date prior to the update install.
  Once you are able to boot normally again, then I suggest that you are looking for virus\malware.  SP1 was released in April 2008.  So if you install earlier means there may be other problems on your system.  If you have a backup of your current personal data then I recommend to do a clean restore to install\factory.  Then immediately install antivirus software, and then do all Windows updates before installing other software. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista does not start after power failure

  It is a Dell Inspiron 1525 with Vista 32 - bit, recently replaced hard drive

  My daughter has been using the computer and the power failed due to low battery.  Now, the computer does not start normally and not all programs will run.

  If I choose "safe mode", it hangs on crcdisk
  If I choose 'window start normally' it crashes to the screen of Microsoft Corporation
  If I choose "last known good configuration" then it seems to start normally, but does not all programs run.

  I tried to boot from the OS disk, but it ignores the entire disk
  I tried to run the installation disk once the computer is running, but it freezes.

  Need solutions.  Thank you.

  Hello Bakajanaidesu,

  Thank you for posting.  It seems that you have a hardware error or failure with your hard drive.  In this case, I recommend that you contact your Dell technical support for more information on how to correct this problem.

  Please let me know if I can be more useful. Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Mail does not start after the update of EL Capitan 10.11.2

  Many applications do not work (do not start) after my Mac Book Pro with El Capitan 10.11.2 update:

  -Mail

  -Time Machine

  -App Sore

  How can I fix this?

  -First data backup. Since you said TM does not work you will need to use another method

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  -If it is repairable, reinstall the OSX. Nothing shall be lost.

  How to reinstall OS X on your Mac - Apple Support

• iPhone 5s does not start after the update of 9.3.3

  I upgraded my iPhone to ios 9.3.3 5s.

  Subsequently, he asked my security code, but would not accept.

  I stopped the phone and now the phone does not start.

  No nails?

  Hovel3 wrote:

  I upgraded my iPhone to ios 9.3.3 5s.

  Subsequently, he asked my security code, but would not accept.

  I stopped the phone and now the phone does not start.

  No nails?

  What you exactly mean you stopped the phone? In fact stop what exactly?

  The password should be the same, I updated my phone and ipad yesterday and was able to use my password.

  You may need to do this:

  If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports

• Does not start after the update to the Mac OSX 10.6.4 3.6.6

  Have updated the 3.6.6. on OS x 10.6.4. Installed according to the instructions, but FF does not start - the application folder or the dock (where I did drag the icon of FF). Looking at the support forum, it seems a number of people have the same problem, but no miracle appear to be sent!

  User Agent

  Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6_4; en - us) AppleWebKit/533.16 (KHTML, like Gecko) Safari/533.16 Version/5.0

  Is the second time that happened and the solution is to continue to work.

• PC with Windows Vista does not restart after installing updates, "Windows could not start...". "File:\Windows\system\winload.exe status: Oxcoooooof.

  Last night, I installed Windows updates on my HP Pavilion dv6227cl and now Windows will not boot.  I get the message "cannot start Windows.  A recent hardware or software change might be the cause.  File:\Windows\system\winload.exe status: Oxcoooooof Info: the selected entry could not be loaded because the application is missing or damaged.  I DO NOT have the Windows Setup disc.

  Hello

  I suggest you borrow the CD of windows vista to your friends

  Method 1:

  Step 1:

  I suggest you check in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  If you be able to start your computer in safe mode, I'd say make clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to see link and check.

  Error: Windows could not start. A recent hardware or software change might have caused the problem after installing Windows updates

  http://support.Microsoft.com/kb/2674065

• does not start after the update of configuration in windows 8

  I have a laptop of hp 2000 and he went to the update and when it restarted, there's just "prepares configure windows updates" and I rebooted several times, and then he said failed, rrestarted himself, but then just sat there again, he sstaysthere day, also has a disc of windows 7 even if the screen of its windows 8 to see if I could implement a restore but still nothing

  Too bad my girlfriend fixed, it

• does not start after the update of Norton

  This morning, I started my HP Pavilion a6600f, and it started normally, running in Vista.  Then, I received a notice of Norton that I needed an update, something that happens regularly.  He downloaded the updates, and then asked that I restart the computer.  I also notied it says a previous update was also pending.  After restarting, it came to initial blue screen hp and nothing more.  No key worked and the hard drive has not been consulted.  Pressing the button, the computer stop immediately, not the usual five second delay.

  Obviously something happened during this update has been processed.   Any help is appreciated.  Because the computer will not start even in safe mode, I know not how to do almost anything.

  OK, I missed the part of Vista but you also said "the keyboard was not working" and that's why I commented on the keyboard.

  Also, you said "I had then a notice of Norton that I needed an update, something that happens regularly.  He downloaded updates, and then asked that I restart the computer ", there was no mention on an update of Windows.

  If this is the case, download and create the recovery of Norton as tool suggested.

• Vista does not start after BIOS flash

  I recently flashed my BIOS for my Presario SR5152NX by Vista after having downloaded the file directly following from the HP site:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=PV-66758-1&LC=en&DLC=en&cc=us&product=3436821&OS=2093&lang=en

  He seemed fine, because he then asked me to restart my PC, I did.

  When it restarts, BIOS seems to be fine but once, he's trying to get into windows Vista, it will NOT start, and instead, I get a BSOD with the following STOP error message:

  STOP: 0X0000007B (0XF789E640, 0XC0000034, 0X00000000, 0X00000000)

  I tried searching for this error, but I do not get a clear answer to what it means.

  In addition, by choosing 'use last known Configuration' always produces the error, and I can't get in any security mode in the start menu.

  I can't enter in Vista, please help.

  I have solved my problem, but please keep this up for the other reference...

  It turns out that the error has to do with a "BOOT DEVICE" error. Once I read that I feared it might be a faulty drive. This was not the case.

  It seems that after the BIOS has been flashed, he changed the order of loading on my readers, and so it hurts than as a master. I guess expected Vista are on it and wrong. What I had to do was go in the motherboard configuration by pressing F10 on the diagnostic screen, and I had to spend my disk drive to configure the Vista disc as the main (has priority on the others), using the + and - keys on the numeric keypad.

  EUREKA, now charge well Vista again and the BIOS is updated correctly.

• IBM Notes 9 does not start after the update to Acrobat DC

  Hey people,

  in January 2016 we went from Lotus Notes 8.5.3 and Acrobat 9.5.5 to IBM Notes 9 and Acrobat DC. After the first installation, everything works fine.

  After update to Acrobat DC it always adds the following line to the notes.ini file:

  EXTMGR_ADDINS = AdobePDFMToolbarInst

  This causes IBM Notes to crash at startup. The following lines are written to the log file:

  [0c 58:0006 - 17BC] 11.05.2016 16:46:35, 75 terminate > of entered NNOTESWC

  [0c 58:0006 - 17BC] 11.05.2016 16:46:35, 75 Terminate > queue name decided to: MQWCTTHREAD6076_2562

  [0c 58:0006 - 17BC] 11.05.2016 16:46:35, 75 Terminate > sending notes, iRefCount WKSMSG_NOTESWC_CLOSE_NOTES: 0

  [14B 0:0002-14 to 8] 11.05.2016 16:46:35, 75 ProcessWksMsgExt > Message: receipt of WKSMSG_NOTESWC_CLOSE_NOTES

  [14B 0:0002-14 to 8] 11.05.2016 16:46:35, 75 Handle_CLOSE_NOTES > entry

  [14B 0:0002-14 to 8] 11.05.2016 16:46:35, 75 Handle_CLOSE_NOTES > NBP does not

  [14B 0:0002-14 to 8] 11.05.2016 16:46:35, 78 Handle_CLOSE_NOTES > message sending close to all child windows

  [14B 0:0002-14 to 8] 11.05.2016 16:46:35, 80 Handle_CLOSE_NOTES > message sending close to the main window

  [14B 0:0002-14 to 8] 11.05.2016 16:46:35, 81 Handle_CLOSE_NOTES > customer alert that it needs to wait for us to go down completely

  [14B 0:0002-14 to 8] 11.05.2016 16:46:35, 81 Handle_CLOSE_NOTES > stop complete, descending

  [6824:0002 - 08BC] 11.05.2016 16:47:50, 66 NEMCheckPreviousInstance > can't wait to treat [5296] as open process failed: error = 87! Continue the launch.

  [6824:0002 - 08BC] 11.05.2016 16:47:50, NEMCheckPreviousInstance 66 > treat [5296] out, continue to launch

  [6824:0002 - 08BC] 11.05.2016 16:47:51 Agent "PDFMLN_8_UNINST" - Fehler: error to the method of the product object / / PDFMLN_ * _UNINST:14

  [6824:0002 - 08BC] 11.05.2016 16:47:52 Agent "PDFMLN_8_UNINST" - Fehler: error to the method of the product object / / PDFMLN_ * _UNINST:14

  [6824:0002 - 08BC] 11.05.2016 16:47:52 Agent "PDFMLN_8_UNINST" - Fehler: error to the method of the product object / / PDFMLN_ * _UNINST:14

  [6824:0002 - 08BC] 11.05.2016 16:47:53 Agent "PDFMLN_8_UNINST" - Fehler: error to the method of the product object / / PDFMLN_ * _UNINST:14

  [6824:0002 - 08BC] Thread = [6824:0002 - 08BC]

  [6824:0002 - 08BC] stack base = 0x002E6A74, the stack size = 39648 bytes

  [6824:0002 - 08BC] PANIC: OSVBlockAddr: Bad VBlock handle (0\0)

  Manual removal of line «EXTMGR»... ' solved the problem. Unfortunately, I have to do once again, after Acrobat updates each time. Of course, this corresponds to each PC in our society.

  Please tell me if there is a solution to this problem. Maybe it's possible to prevent adding one line to the notes.ini Acrobat file?

  To make sure that: of course I also placed this question at IBM!

  Kind regards

  Florian Burger

  Just to close this band of working capital, IBM Notes 9 FixPack 6 solves the problem.

• Every night does not start after the update, AV recognized every night as a threat

  After update, AV reported the threat. After that, every night can not start, erorr message says "cannot find Mozilla runtime".

  Hello irena0072, it is most likely a false positive. Maybe your AV software has quarantined or deleted components that are necessary for firefox run. Please try to reinstall every night.