Windows Vista - error 663 when installing updates

Similar Questions

• Windows vista home premium-inable install updates error code 80070005

  original title: windows vista error code 80070005 premium family

  My computer won't allow updates. Whenever I check for them I get the error code 80070005. How can I fix it? Ive tried a few fixes here and nothing works.

  Hello

  ·         What are the troubleshooting steps you have tried?

  ·         You get the error message with code 80070005?

  I suggest you follow these methods and see if it helps:

  Method 1:

  Try to install the update to the clean boot and check if it helps.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135/en-us

   

  Note: Don't forget to start your machine in normal mode by following step 7 of the link.

   

   

  Method 2:

  You can try temporarily turning on all security software and then try the updates again.

   

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  
  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

   

  Method 3:

  I suggest you to reset the Windows Update components and check.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 4:

  Follow the steps in the below article mentioned and look for the question.

   

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 5:

  Error code 80070005 means generally that you're not quite allowed to install updates. Check out these articles from the KB and check if that helps.

  http://support.Microsoft.com/kb/816731

  http://support.Microsoft.com/kb/918355

• ERROR: 0x8007F0F4 when installing updates in the Windows XP computer.

  Original title: ERROR: 0x8007F0F4.

  I get this error code when Win Update turns on and I'm trying to download/install. It's boring. The update never installs and then returns icon in the systray... what to do, ignore?

  Hi Kota57,

  You did it of any material changes or software on the computer before this problem?

  This problem can occur if any of the following scenarios exist on your computer:

  (a) you are trying to update your laptop when it is running on battery power.

  (b) the update installation program detects that the update is incorrect for your computer.

  (c) updates have not been installed on your computer.

  You can follow this link and check if the problem persists.

  You may receive a "0x8007F0F4" error code when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site

  Hope the helps of information.

  Please post back and we do know.

• Code error 800b0100 when installing update Vista KB979559

  I am running Vista SP2, when you try to update KB979559 I get error 800b0100 code.

  What should I do? I tried disabling my firewall. still the same error.

  Description of the update of the system for Windows Vista tool
  http://support.Microsoft.com/kb/947821
  0x800b0100 - TRUST_E_NOSIGNATURE - no signature was present in the subject.

  Error message when you try to use Microsoft Update or Windows Update Web sites to install updates: "0x800B0100.
  http://support.Microsoft.com/kb/956702

  TaurArian [MVP] 2005-2011 - Update Services

• Get the 8007371B error code when installing update for Windows Mail Junk E-mail Filter [December 2009] (KB905866) _

  When I run Windows Update it shows an important update available. "Update for Windows Mail Junk e-mail filter [December 2009] (KB905866).
  When I try to install the update, it downloads, create a restore point and starts to install the update.  The green bar goes all the way to the right and then I get a "failed" message with a 8007371B unknown error code.
  KB905866 appears in the list of installed programs.  I tried to uninstall and rerun the update of Windows, but he continues to go through the same sequence of activities having the same error message for result.

  Is there a solution?

  Last successful update was (November 2009) 11/11/2009
  First update failed (December 2009) on 09/12/2009

  SP2 has been installed.

  SP2 has been installed 03/07/2009

  Update tool for Windows Vista... (KB947821) has not been installed.

  I'm currently running AT & T Internet security from McAfee.

  This machine had Norton and AVG anti-virus in the past that I don't really know what was running back in July.

  I'm currently running AT & T Internet security from McAfee.

  This machine had Norton and AVG anti-virus in the past that I don't really know what was running back in July.

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file that you saved in #1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. now, make this McAfee "triple fix": http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  Test.

  PS: Please don't substantially edit a message from you after that someone has replied to it or a post later of yours in the same thread. THX

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Vista: Error 8000FFFF when checking for updates

  error code 8000ffff

  original thread: 8000FFFF error code when I try to check for upgrades to vista 32

  http://support.Microsoft.com/kb/946414

  Error when you download updates using Windows Update or Microsoft Update: 8000FFFF

  To resolve this issue, try the following methods in the order that they are listed.

  Back to top

  Method 1: Restart your computer and then try to install the updates

  Close all programs that are running, restart your computer and then try to install the updates.

  Note Restarting the computer will ensure that all previous installations are completed and there is no remaining processes that require a system restart until they can be performed.

  If the problem is not resolved, go to method 2.

  Back to top

  Method 2: Save and then delete the registry keys that may cause the problem

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  To use the registry editor to back up and then delete the registry values listed in the "Error Description" section, follow these steps.

  Note These steps are known for this problem that is described in the section "Description of error message. These steps may not solve the problem if Error 8000FFFF code in a scenario which differs from that described in the section "Description of error message.

  1. Click Start
     Collapse this includes this image

     

     .

  2. In the Search box, type regedit.
  3. In the list of programs , click on Regedit.exe.
     Collapse this includes this image

     

     If you are prompted for an administrator password or a confirmation, type the password or click continue.

  4. Locate and then click the following registry subkey:
     HKEY_LOCAL_MACHINE\COMPONENTS
  5. Click COMPONENTS.
  6. Click export.
  7. In the file name box, type COMPONENTS.
  8. The area Save in , click desktop, and then click Save to save the file to your desktop.
  9. In the Details pane, right-click PendingXmlIdentifier, and then click Remove. If this value does not exist, continue to the next step.
  10. In the Details pane, right-click NextQueueEntryIndex, and then click Remove. If this value does not exist, continue to the next step.
  11. In the Details pane, right-click AdvancedInstallersNeedResolving, and then click Remove. If this value does not exist, continue to the next step.
  12. Restart the computer.

  To check if this fixed the problem, go to the "fact this corrects the problem?" section.

  If the above does not resolve the problem, follow the previous advice given.

  See you soon.

  Mick Murphy - Microsoft partner

• Error: 80073712 when installing updates KB2419640, KB2478935, KB2434419

  Original title: upgrade Windows Vista home basic SP2 face to troubled windows

  I can't update updates of security KB2419640 & KB2478935; also the same with windows live essentialsKB2434419.

  Update met the error code: 80073712

  Last update of successful security on16.12.2010 KB226199 installed. My PC is a 32-bit system.

  To resolve this problem, I downloaded the windowsUpdateAgent30 - x 86 .exe. When running it went to install a PATCH... But, also, who did not. Following the suggestion of a different side to try to fix and the running of series 3. DLL files, the 2nd one was not found.

  Please someone suggest how to get the penalty.

  Please answer all the questions of diagnostic following by number in your very next answer (no need to quote this post):

  1. what application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  2 to give application Norton or McAfee application ever been installed on this computer?

  3. do you have a free trial Norton or a McAfee free trial come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  ==============================

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• error 646 when installing updates

  I got a lot of noticesto February windows update tried installing updates and will not accomplish.

  Hello

  It is a Microsoft Fixit who will help with this issue.

  You receive code 646 error or error code 0 x 80070646 when you try to install Microsoft
  Office updates
  http://support.Microsoft.com/kb/2258121

  Check this thread:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/18449f60-C149-4EAF-B8E6-a2880cd7232b

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

• Error 643 when installing update security for Microsoft Visual C++ 2008 Redistributable Package (KB9739724) and a security update for Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB9739723).

  I downloaded both of these updates and was asked to restart my computer in order to install them.  When I restart my computer it says: "Installation to update 1 of 2..." and then finally she said "Shutting down...". "But my computer never stops.  Fifteen to twenty minutes later, I get a blue screen that says something about the dumping of memory, then the computer reloads the login screen.  When I log in, I get the 643 error message that says that it was unable to install the updates.  As a side effect of this error whenever I try to shut down my computer, it tries to reinstall the update again and my computer never stops.  Even when I unplug the wall remains on him.  I tried to use system restore to go back to the point before I installed the update, but it loads just for a while and then said: "system restore has failed."  I read in another thread that you are not allowed to bring support for updates associated security update.  If this is the case then I need at least to help make my computer stop trying to install these updates when I shut down my computer so it stops correctly.  Thank you.

  RAH66Comanche,
  With these security updates, it is better to get them installed.  You can run the following tools to ensure that there is no system problems:
  Disk error checking
  System File Checker

  Then, run the System Update tool and try again to install updates.

  If you just want to try to hide these updates, you can perform the following procedure:

  Click Start Menu > click the button run
  In the Open box, type %windir% & then click OK.
  Note the %windir%\System32 folder is the folder where you installed Microsoft Windows.
  Find the folder C:\Windows\SoftwareDistribution.
  Right-click the C:\Windows\SoftwareDistribution folder and then click Rename.
  Type SoftwareDistributionOld & then press ENTER.

  Then go to Windows Update and hide the 2 updates.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• error 80070005 when installing updates.

  It's actually an old mistake.

  I found that this means that there is no appropriate permissions.
  AccessChk used,
  "Error opening of HKLM\software\Microsoft\Windows\CurrentVersion\Component database maintenance:
  Access is denied.
  No matching items were found. »
  Output to:

  C:\Users\Rohan\Desktop>AccessChk.exe - n s 'nt service TrustedInstaller' k 'hkl '.

  m\software\Microsoft\Windows\CurrentVersion\Component of the service' > accesskc

  HK.txt
  What can I do?

  Hello

  Were there any changes made recently to the computer?

  Follow the steps in this article.

  Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update: http://support.microsoft.com/kb/968003

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  Temporarily disable anti-virus

  Warning: If you need to temporarily disable the antivirus to install other software. You must re-enable the antivirus as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to virus attacks.

  I hope this helps.

• Windows Vista error 800b0100 of code update

  Hi I get this error message despite the installation preparation tool system it seems to still train

  Its driving me crazy!

  pleassse help

  Cormac

  Hello

  see if that helps

  Error message when you try to use Microsoft Update or Windows Update Web sites to install updates: "0x800B0100.

  http://support.Microsoft.com/kb/956702

  or repost in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Vista - error code: 8007066F installing update (982158)

  I have Windows Vista 32 bit and I am unable to install update 982158. I tried the suggestions on the site MS - rename the Windows Update download folder and download and then install the update manually - doesn't have two things. I tried using the "Trouble Me" link and that did not work. Help!

  Chaminade,

  0X8007066F ERROR_UNKNOWN_PATCH

  The update is not applied to this product.

  see if temporarily disable UAC allows updates to install.

  try to disable user account control first download before the update manually. See: (Guided Help: settings to adjust user account control in Windows vista:http://windows.microsoft.com/en-AU/windows-vista/Turn-User-Account-Control-on-or-off>)

  or just disconnect from the internet and try to install the updates. You may have to restart everything first.

  Otherwise...

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

• Error 646 when installing updates in windows Vista

  Hi, I need someone to help me on this problem while trying to install on my Vista windows updates, I am constantly the error code 646... I tried to install them manually as well, however without much luck... can someone guide me, please?

  Thank you
  Ajith

  Option: File of Windows Update agent wups2.dll is incorrectly registered and the registry associated with the Wups2.dll file files are missing.

  Method 1: Save the Windows Update files

  1. Click Start and type notepad in the box start the search.
  2. click on Notepad in the list programs.
  3. copy the following commands, and then paste them into the opened Notepad window:
  REGSVR32 WUPS2. DLL/S
  REGSVR32 STINKS. DLL/S
  REGSVR32 WUAUENG. DLL/S
  REGSVR32 WUAPI. DLL/S
  REGSVR32 WUCLTUX. DLL/S
  REGSVR32 WUWEBV. DLL/S
  REGSVR32 JSCRIPT. DLL/S
  REGSVR32 MSXML3. DLL/S
  4. in Notepad, on the file menu, click Save as.
  5. in the file type list, click all files.
  6. in the file name box, type register.bat.
  7. save the Register.bat file to your desktop.
  8 right-click the Register.bat file, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password or click on continue.
  9. try to reinstall updates.

  http://support.Microsoft.com/kb/958053
  See: method 1: save the Windows Update files

  http://support.Microsoft.com/kb/326253
  Method 5: Registry Windows Update engine files

  http://support.Microsoft.com/kb/971058
  How to reset the Windows Update components?

  Method 2: Download and install Windows Update agent

  Windows Update Agent

  How to get the latest version of the Windows Update Agent to help manage updates on a computer
  http://support.Microsoft.com/kb/949104

  Information for network administrators about how to obtain the latest Windows Update Agent
  http://support.Microsoft.com/kb/946928

  Click Start, click run, click Browse, navigate to the file you saved and click Open.

  Add the switch /wuforce at the end of the command run and then click OK. For example, the command run might look like this: "C:\WindowsUpdateAgent30-x86.exe" /wuforce

  Click run.

  Follow the steps to complete the wizard.

  Important

  To reinstall Windows Update Agent - download the relevant file from one of the links provided above and save it to a drive where Vista is not loaded because the file cannot be launched directly from the root directory of the system.

  Click Start, run, type: "D:\WindowsUpdateAgent30-x86.exe /wuforce" (without the quotes) and press ENTER to install the Windows Update engine.

  Note: There is a space between "D:\WindowsUpdateAgent30-x86.exe" and "/ wuforce.

  D: is the drive where Windows is not installed (IE a flash drive or a 2nd hard drive etc.)

  TaurArian [MVP] 2005-2010 - Update Services

• Error 80244019 when installing updates

  mylaptop retrieved using restore dvd. Update Windows XP, is to return error 80244019

  Please check your level of service pack systems by clicking on start, run and typing "Winver" in the Run dialog box. If you do not have windows xp sp3 installed, I suggest you download and install it from the link provided below.

  Windows XP SP3.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  When you are finished with the installation, return to Windows update to see if the problem is resolved.

• error 646 when installing updates KB2251419, KB227947 and KB982331

  The three security updates cannot be installed. Error 646 and no solution is offered!

  Hello

  Please run this FixIt:

  http://support.Microsoft.com/kb/2258121

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/