Windows Vista failed to start. hardware or software might be the cause... Please someone help
When I turned on my pc this morning, he said cannot start windows. hardware or software may be the cause. It gives me 2 options. run the Startup Repair tool recommended. and s tart windows normally. I tired the twic to the Startup Repair. From the beginning, he says immediately repair attempt, but eventually I shut down my pc via the power button, because it seems to never end. Both its managed like an hour and 20 minutes and nothing. I try once more and I'll let it run for a few hours. What should I do if it does not work. ?
Hey man think for the help... I reinstalled windows... I was able to save the part where my old files were running in windows.old. Just copy all the files. Eh, it could not have something to do with the question but why update of microsoft framework 3.5 service pack 1 do not install
Tags: Windows
Similar Questions
-
my windows firewall does not start and I get a erroe code 5, can someone help me
my windows firewall does not start and I get a erroe code 5, can someone help me
Hello
1. What is the brand and model of the computer?
2. what security software is installed on the computer?
3. have you made changes on the computer recently?
Method 1.
To resolve this problem, click the fix button of this article to diagnose and fix common Windows Firewall problems automatically.
Some services start not in Windows Vista and Windows 7: http://support.microsoft.com/kb/943996
Method 2.
Automatically repair the settings of Windows security to secure your PC: http://support.microsoft.com/mats/Malware_Prevention/
To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows
For Windows 7: back up the registry: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry
I hope this helps.
-
Windows Vista fails to start up normally. (ADVANCED QUESTION)
Well, I'm tired, here's the deal. I'm trying to fix a computer hp laptop. This is the error message that windows has not shutdown properly or a recent hardware change or messed up software operating system. When I load windows normally, it is stuck at the loading screen. When I go there to remedy, he suggested a system restore and freezes. When I put in a system repair disc, what happens with the error 0xc00000e9 status, which means basically that it cannot communicate with the disk drive. If anyone has ANY suggestions please help!
"When I put in a system repair disc, it comes up with error 0xc00000e9 statehood."
You cannot use a Windows 7 disc on a Vista computer.
It is not going to fix anything.
And make sure that borrow you the 'bit' correct (32-bit or 64-bit) Vista disc version.
There must be the same version of 'bit' that what is on your computer
Here's how to use startup repair options when you manage to borrow a Vista DVD
http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/
Table of contents
- Overview of Windows Vista repair options
- How to perform an automatic repair of Windows Vista using Startup Repair
- Advanced Tools Overview
- Conclusion
See you soon...
-
original title: URGENT
How to start Windows Vista when 'Launch Startup Repair' or 'Start Windows normally' did not work? I want to avoid the deletion of my data.
Hello
for starters, the info you received a DVD of windows 7 repair vista usage are BAD
you need a DVD vists or a vista Startup Repair disk repair vista
and you can NOT do a repair installation of booting from a DVD in vista
Repair facilities are on within an operating system
1st thing to try is a restoration of the system in safe mode
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not read this information
the link below is how to download and get a vista disk startup repair, which you can start from the
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below
http://www.bleepingcomputer.com/tutorials/tutorial148.html
to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start
It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu
Change boot order it do dvd drive 1st in the boot order
http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/
If necessary
Data recovery
1. remove the hard drive and it slave in another computer
2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive like this
3. try Knoppix
http://www.Knopper.NET/Knoppix/index-en.html
BUT this method depends on your hardware in the computer that failed
-
update helps... Difficulty helps lol
I have vista Home premium, but does not start it tells me to put my disk installation and repair process. can I buy windows7 upgrade or should I buy the full version, I'm not going to do...? I got my pc checked thourghly and everything is running perfectPlease use the Vista system repair and recovery forum to fix your departure upward.
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system?page=1&tab=all
Yes, as long as Vista is still installed on the hard drive you can use a copy of Windows 7 upgrade to upgrade your computer but you will need to boot the computer with the Windows 7 dvd and perform a custom installation. Which will remove all your programs and data so there will be very practical backups.
The best option is to repair Vista first.
Before dismiss you the idea of buying a copy of the full license of Windows 7, remember that it would be transferable to a new computer much more easily that an upgrade copy is.
-
Windows Vista could not start and wants me to run the Startup Repair tool BUT
It does not work... it takes forever and then asks me to load the drivers... where are they located? I can't find them on my Vista disk or my drivers disk... using a Dell Studio 17...
When he goes into repair mode it gives a big arrow after about three or four minutes... then in another five he asks for keyboard language, then select the driver...
where should I go from here? I know that this has already been answered, but I can't seeem to get there
Here is an article from Dell on how to do a manual reinstall of the operating system (but note this is a clean install and not a system/upgrad repair install so it will wipe clean all the process data): http://support.dell.com/support/topics/global.aspx/support/dsn/en/document?docid=339949.
If you have an Installation of Vista genuine disc, you may be able to do an installation of repair/upgrade of the system (which would be better than the above option). Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html. Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. If other procedures do not work, it is almost certain to work. You can have a lot of updates to re - install (including all you need to remove service packs). If the version of the system came with SP1 or SP2 preinstalled and the disc is an earlier version, then you will need to make a record of slipstream as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html. If you have problems to install the drivers, read the article above by Dell on how to obtain and install the drivers - it should apply in this case as well.
If your system is still under warranty, contact the Support technique Dell and they probably have you will help with your problem over the phone free. If she is no longer under warranty, there are still a few options of support at their Support Center who may be able to help. http://support.dell.com/support/index.aspx?c=us&cs=19&l=en&s=dhs& ~ ck = mn or http://support.dell.com/support/topics/global.aspx/support/dellcare/en/contact_technical_support?c=us&cs=19&l=en&s=dhs. \
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
I've updated pctools free and there was a mistake by because it came when the computer restarts,
Windows could not start. A recent Ministry of hardware or software may be the cause. To solve the problem.
1. Insert the windows installation disc and restart your computer.
2. choose your language settings, and then click "next".
3. click on "repair your computer".File: \windows\system\drivers\PCTCore.sys
status: 0xc0000098
Info: windows could not load a critical system driver is missing or corrupt.
I tried I went to my computers startup options advanced and tried to run in safe mode, but the same previous screen came. Each option in my boot options is the same screen. I realize that to solve this problem, I might have to reload my OS together. I tried to put what I believe to be the installation disc in and restart but it starts and says the same message. I don't know how to start from the DVD.
Someone at - it solutions?
Change the boot order in the BIOS to boot from the CD drive first.
How to change the boot sequence in the BIOS
http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/C:\windows\system32\drivers\pctcore.sys file information
http://www.file.NET/process/PCTCore.sys.html -
I have a 4 years old HP G60-235DX computer laptop Vista Home Premium OEM factory installed. I had been doing the blue screen of death the last 8 months. On Tuesday afternoon, I ran ChkDsk. It was taking too long so I hit the power button. now on startup, a message indicates "Windows Failed To Start." A recent hardware or software change might be the Cause. "I tried to restore it to 4pmPST (Tuesday 7/2), but he sent the message:"your computer is running In A Limited Diagnostic State. If you use the system restore in this Limited State, you can't undo the restore operation. "Expert Microsoft at the reception of the answer took me by (attempt), safe mode safe mode with network (failed attempt), last known good configuration (failed attempt). He said that he needs me to order a HP recovery disk because the Vista system files are corrupted, damaged or missing. Does this sound correct? Try to get a good HP # order JUST a recovery disk. I was the victim of the "have you tried to fix your own computer without HP offers you a recovery disk? This is what happens when you try to fix it yourself without HP offers you a recovery disk. »
Thank you.SkynetYour CV has been provided with a score of hidden restore and HP provided instructions on how to create the recovery disks
http://h10025.www1.HP.com/ewfrf/wc/document?CC=UK&LC=en&DLC=en&docName=c00809678
If you know the brand of the hard disk on the system, this disc has a free disk bootable verification utility, if you do not know the Player try to WD's SeaTools
-
Windows could not start. A recent hardware or software change might be the cause.
I have a Toshiba M300 and it fails to start. Here's what he said.
Windows could not start. A recent hardware or software change might be the cause.
If the files in the window were damaged or configured incorectly, startup rapir can help diagnose and fix the problem. If the power was interrupted during startup, choose start windows normally.
Lanch Startup Repair
Start window normally
Well, I had two options... and nothing works. It gets stuck just on loading thingy, where it says MICROSOFT WINDOWS and keeps loading... I leave for 2 days and he continued make it... and it also won't let me restore my computer...!
PLEASE HELP :(
Hi Suzanna2001,
Were present from recent changes to the system before the show, such as adding new hardware or software (including Windows Update). You have access to a Windows CD/DVD? Run the startup from the CD/DVD repair. There is also an option to perform a restore of the system on the CD/DVD. If no option is the problem, follow the steps below:
1 1 demarrer start from the Windows 7 DVD, select your language and keyboard options, select repair your computer, and then select command line.
2. from the command prompt, run the following command:
DISM image:c:------/ Get-PackagesThis will produce a list of updates installed and packets. They will look like this:
The package identity: Package_for_KB978262 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.1.1.0
Status: installed
Output type: security update
Install time: 02-11-2010 13:013. find the most recent and then make a note of the identity of the package.
4 run:
DISM image:c:------/ Remove-Package /PackageName:Package_for_KB978262~31bf3856ad364e35~x86~~6.1.1.0 (name of the update from the previous step)
Until it is complete, you will get a status of the collection.
5. restart your PC.
You want to start with the most recent, and then remove them one at a time to find the problem update Dena
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Help, please! Installing Windows Interrupted!
Hi recently my computer was giving me a bit of concern for example (running slow, do not easily light etc...). A couple of days, my computer has decided not to put on after a glance on the net (on my other computer), I found I had a problem call KSoD or black screen of death, therefore I went on youtube and made all the different things said youtubers can fix this how ever none of these things worked, so finally I decided that I would have factory reset my computer/windows to using the system restore. However, at half way through the installation of windows after the factory reset (my computer came with no disk Windows), my computer has decided to remove what I believe to be called a blue screen of death, that this happened before and I thought it was part of the installation but when I turned my computer on he showed at the bios screen , but then it said 'unable to start Windows. A recent hardware or software change might be the cause. To solve the problem: 1. Insert your windows installation disc and restart your computer. 2. choose your language settings, and then click Next. "3 click on repair your computer ' all this is very well apart from the fact that I do not have the windows installation disc. I'm stuck at this screeni however have a disc of windows 7 and that he was going to install windows7 after I got my vista Setup! but the only I see is the bio screen so I was wondering if there was some way I could install windows 7 from the bios or simply delete the entire half installed this error files windows vista from the bios screen? Please, any help is greatly appreciated. Or get a new internal HDD would fix the problem aswell?Hello
You can check out the following link and check:
Installation and reinstallation of Windows 7
http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7
See also, how to start your computer from a Windows 7 installation disc or USB flash drive.
Note:
If the copy of Windows 7 is an upgrade, you will need to install a full version of Windows Vista and then upgrade to Windows 7
I hope this helps!
-
When you try to run a system recovery I get this error; OxcOOOOOOf
Original title: error OxcOOOOOOfMy laptop crashed. I used my initial recovery to start. I get a message from Windows Boot Manager as follows:
Windows could not start. A recent hardware or software change might be the cause. To solve the problem:
1. Insert Windows installation disc and restart your computer.
2. choose your language settings, and then click "next".
3. click on "Repair your computer."If you do not have this disc, contact you system administrator or computer manufacturer for assistance.
File: \Windows\system32\winload.exe
Status: OxcOOOOOOf
Info: Seelected entry could not be loaded because the application is missing or damaged.
It does not work. Suggestions and no, I have not modified before the crash.
I loaded my recovery disk for my 32-bit home edition of vista Hp pavilion dv6700 cto entertainment lapt top and after going through the recovery process I just get this mechioned of the screen in the original question. How ever during my recovery process never got far enough to enter my product code, he asked just a two disc and disc supplamentry and then gave me a blue screen black for a minute or two then rebooted and showed the failure of start OxcOOOOOOf screen... what should I do?
Hi Anthony206,
Since you've already tried to use the Windows Vista recovery disc has received from the Original Equipment Manufacturer (OEM).
From now on, you can only contact OEM for the use of the recovery feature.
I hope this helps.
-
Original title: is that what Microsoft offers downloadable boot for Vista drive data
I have a Windows error recovery when Windows does not start. A recent hardware or software change might be the cause.
Loops in this form BACK to watch as it starts, it then restores to the error recovery screen.I need information from the startup disk so that I can read my Dell Inspiron 531 Windows disc and if all goes well the error; Download a Microsoft?Hello
try a system restore of 1st
If this does not download and use a startup, the ERD etc. neosmart
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not read this information
the link below is how to download and get a vista disk startup repair, which you can start from the
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below
http://www.bleepingcomputer.com/tutorials/tutorial148.html
to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start
It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu
Change boot order it do dvd drive 1st in the boot order
-
Whenever I try to boot my system I get the error message
Windows could not start. A recent hardware or software change might be the cause.
File:\Windows\System32\Drivers\shcsh.sys
Situation: 0xc0000225If I try to boot from the DVD of ROM(with Windows Visata) to reinstall the operating system to Windows Vista, it does not.
Please I need your help
Have you changed the boot order:
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
See you soon.
Mick Murphy - Microsoft partner
-
Windows could not start - hardware or software recent change
Rises in screen Windows error recovery. It says unable to start windows. a recent hardware or software change might be the cause. To solve the problem. 1. Insert your windows disk and then restart.
I tried, but nothing happened.
Any ideas on how to get my computer to boot. It's a pc and I am on my laptop now
original title: windows error recovery
You don't say what steps you have followed.
Follow these steps to try to solve your problems of boot.
Restore point:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use:
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner:http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
See you soon.
Mick Murphy - Microsoft partner
-
Windows could not start. A recent hardware or software change might be the cause. To solve the problem:
1. Insert your Windows installation disc and restart your computer.
2. choose your language settings and thenk click 'next '.
3. click on "repair your computer".If you do not have the disk, contact your system administrator or computer manufacturer for assistance.
File: \Windows\system32\winload.exe
State 0 xC0000001
Info: The selected entry could not be loaded because the application is missing or damaged.But, instead of file: \Windows\system32\winload.exe I get file: \$Windows.~BT\windows\system32\winload.exe.
Hi imranhussain1979,
· You have made any changes recently?
· When it was working fine?
· You have Windows XP or a later version of Windows?
Step 1: The error seems to refer to a later version of Windows. Restart the computer and check if the installed operating system.
Step 2: Try to start the computer in safe mode and check the number.
Start your computer in safe mode
Microsoft Windows XP: start the computer in safe mode
Respond with more information so we can help you best.
Maybe you are looking for
-
НЕ МОГУ СБРОСИТЬ СЕКРЕТНЫЕ ВОПРОСЫ. ДЕЛАЮ ВСЕ ПО ИНСТРУКЦИИ В ИТОГЕ ВЫХОДИТ: 'НЕДОСТАТОЧНО ИНФОРМАЦИИ ДЛЯ СБРОСА КОНТРОЛЬНЫХ ВОПРОСОВ' КАРТОЧКА ПРИВЯЗАНА ДЕЛАЛ ПОКУПКИ. ПОМОГИТЕ МОГУ ПРЕДОСТАВИТЬ ВСЮ ИНФОРМАЦИЮ.I can't reset the security questions. D
-
Satellite L20 keyboard & touchpad work not but keyboard works in the BIOS
On my laptop Satellite L20 not work keyboard and the touchpad and keyboard works in the BIOS, USB ports also does not (USB mouse). Can I get the BIOS update file (traditional update on the boot CD, no BONE!) Sorry for my bad English.
-
Cannot detect the instrument (TDS 210)
Hello, I have difficulty to connect PC tektronix TDS 210. I use GPIB USB HS, operating system is windows 7, NOR-488-3. The problem is after I installed everything needed for this configuration, using the measurement and automation, I can't detect Tek
-
How to reset Windows with a Standard account?
Original title: hard reset? So I need to reset my c2 lenovo desktop computer. only problem is that the admin account is locked and it is saved as a microsoft account that technically does not exist. the account is managed by an institution and it fil
-
HelloIs it possible to automate VDP 6.0 is usng PowerCLI, API or something else?We want to manage tasks (Add/Remove vm, change retention, etc) remotely and not via the Web Client of VirtualCenter.Is this possible?Thanks in advance.