Windows Vista Home Basic Edition does not detect networks wireless scope.

Similar Questions

• my windows Vista Home Basic Edition does not show the Office when I log in. it shows only a green screen

  Original title: green screen

  my windows Vista Home Basic Edition does not show the Office when I log in. it shows only a green screen. I tried all the options in F8 mode with no result. How can I fix it without losing any information on the hard drive?

  Hello

  1 - do you mean that you get the green screen even in safe mode?

  2 did you recent hardware or software changes to your computer before this problem?

  If you are unable to start desktop even in safe mode, then you try to perform the verification and startup repair.

  Reference: http://windows.microsoft.com/en-US/windows-vista/Startup-Repair-frequently-asked-questions

• Acer Aspire laptop with Vista Home Basic Edition does not, System Restore does not, sfc, find corrupt files but do not repair. Need help!

  Hi, I have an Acer laptop Aspire with Vista Home Basic Edition that came pre-installed, so no records only the disk hard drive partition.

  I turned on my laptop today and it starts but the loading bar of stalls at the black screen with "(c) Microsoft Corporation" and dragging green. The slide bar will continue to drag, but nothing else happens which means that I understand even as much as the login screen. I rebooted and tried Windows recovery, but the only remedy to what he suggests is a restoration of the system, which does not have any point, I try to restore it.

  To remedy this, I have connected in safe mode and ran the SFC command prompt. It scans my system and told to find corrupted files, but he can't heal some. This is where my knowledge limit runs out. I don't know how to fix the files that the SFC cannot. (Also I created a journal using the findstr command prompt and checked but it say anywhere that it was unable to fix it so I'm not even sure how to identify corrupted files)

  As it's an Acer laptop, Aspire I'll try their eRecovery tool to return my computer to factory settings, but it won't work in safe mode, and as I said I can not connect normally. I tried alt and F10 at the initial boot screen when I turn on, it loads the windows files and shows the Acer "Please wait a moment" screen and then nothing happens again.

  I can't afford to get it fixed, and there is no chance I can get a new laptop. Any ideas/help? Thank you.

  Hello

  You have t in Normal Mode to resolve problems by using upgrade repair facility that is SFC

  Read this topic eRecovery Acer.

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

  To start the system recovery:

  1. Restart the computer.
  2. When the Acer logo appears on the screen, press the left Alt and F10 keys.
  3. If you are prompted with a Microsoft Windows splash screen, press the Enter key.
  4. After that the Acer eRecovery Management application is loaded, select your type of restore.
  5. Read the review and then click Next when you are ready.
  6. Click Next to start the restore process. It may take 10 minutes up to an hour fom anywhere to restore.
  7. Once the restore is complete, your computer will restart. After the reboot it will load Windows and start the installation of your software and drivers. Your computer will restart several times during this process. Once they are all completed, your computer will be like it was when you bought it first.

  See you soon.

• Windows Vista Home Basic Edition keeps looping and will not start

  Windows Vista Home Basic Edition will not boot to the Welcome screen. It keeps restarting loop. I tried to go into safe mode, but who does not start too. Loops of safe mode and return to the start screen.

  I have a dell laptop and I just restalled operating system. I had Windows Update set to automatically download and install. PC worked great until the next day (after the time programmed for automatic updates). I'm assuming that the started after some windows updates when installed. Unfortunately, I can not enter in Windows or Normal or Safe Mode.

  Bill

  If safe mode does not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  See you soon

  Mick Murphy - Microsoft partner

• I can't reinstall windows Vista Home Basic Edition to my Compaq presario laptop

  Hello
  I want to format my 'C' drive and reinstall windows Vista Home Basic Edition for my 'compaq presario laptop.
  When I lived with my recovery disk, it has been fine until "loading windows files" and taking me to the recovery / restore point but not with the format options (GUI).

  Hello

  With this HP Compaq recovery process, it's a different process than the installation with the Microsoft DVD

  There is a section slightly more than 1/2 at the bottom of this link from HP showing you how to reinstall Vista using their recovery disks.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703#RestoreWithDiscs

  If you have any questions or problems with it, contact HP as it's the HP recovery process.

  Contact HP:

  http://h20566.www2.HP.com/portal/site/hpsc/public/help/contactHP/home/?AC.admitted=1336217096189.876444892.199480143

  Or try the HP's Support Forums:

  http://h30434.www3.HP.com/

  See you soon.

• A POP-UP MESSAGE WARNING EXPIRATION OF WINDOWS VISTA HOME BASIC EDITION

  I have a laptop Compaq Presario V 3000, purchased by me on May 28, 2008 in Bangalore, India (Reliance digital) and delivered to me preloaded with Windows Vista Home Basic with a label number key to the laptop. (The 20 product ID numbers is also known).

  It worked OK all along.

  (For the PAST 3 DAYS, I get the following pop-up message when I boot on):

  THIS FIRST VERSION OF WINDOWS HOME BASIC WILL EXPIRE IN SEVEN DAYS. BACK UP YOUR FILES AND THEN INSTALL no matter WHAT EDITION OF WINDOWS (message on today morning: March 24, 2010).

  I'm confused by this warning that I have a lot of data stored in my laptop (with HDD of 160 GB and 2 GB of RAM).

  I'll be very grateful to expert MS Forum for helping me solve this problem of EMERGENCY, as I am only left with more than seven days!

  Thanking you,

  E Devadpss

  You should backup your data NOW by purchasing an external hard drive and copy your data files on it. Then, I would give the store where you bought it a call. If they do not, call the HP technical support immediately. MS - MVP - Elephant Boy computers - don't panic!

• Need help to buy the activation Code for Windows Vista Home Basic Edition

  Hi I am looking to buy a new Activation Code for Windows Vista Edition family Basic can help you

  Original title: activaction Code for Windows Vista Home Basic

  Hello

  See the article to get a new Windows product key:

  Get a new Windows product key

  http://Windows.Microsoft.com/en-us/Windows-Vista/get-a-new-Windows-product-key

  http://support.Microsoft.com/common/international.aspx?RDPATH=DM;en-us;selectassist&target=assistance&SD=GN

  If you need assistance more support article about activation:
  Support for the Microsoft Product Activation issues
  http://support.Microsoft.com/GP/cu_sc_prodact_master

  See also:

  Activating Windows: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/activating-Windows-frequently-asked-questions

  I hope this helps.

• Windows Home Basic Edition does not connect to a grace wireless working group

  I'm running 3 computers on a workgroup that connects to the internet. A computer running Windows 7 Pro, another Windows XP Pro and the third is a laptop running Windows 7 Home Basic.  There are full between the 3 interoperability when connected via a LAN cable, even when the laptop is connected to the wireless router.  However, if I try to use the laptop without cable, it will connect to the router wireless as an unidentified Public network and therefore does not see the Working Group (and therefore there is no internet access).

  If I click on the icon of unidentified network in the center network & sharing, I expect to be able to select the type of network, I can use - i.e. knit - but instead I get a box indicating that it is a public network, unidentified without options.  I tried to use the difficulty Microsoft it 50725 - but he said he could not change the network settings and I should change in network settings - which I can't.

  In this mode, I can 'see' the laptop on the other two computers, but its network location is black (not the working group only when connected via cable) and if I try to open up the laptop I get an error message saying: it can not find the path.

  This is a recent problem that the system worked very well upward until a couple of there are days where I lost wireless connectivity. The signal strength is 100% (the router is normally less than 30 meters, although now is 1 meter away so I can plug the cable) and there is no other networks wireless within several km.  I have a total control through my browser to the router through the wireless link wireless, the material is so everything is OK - it takes a few adjustments to the software.

  Any ideas?

  Sorry for the delay in replying, I had problems to download all the drivers the most recent, but ultimately successful.

  Uninstall and reinstall the wireless card had no effect so I started the update or replacement of all other drivers as well.

  Replace the Bluetooth driver did the trick, even if it has been disabled in advance and it is always off - but for reasons that I doubt I'll never, understand which seems to have been the problem--for now

  Thanks for the advice - it always pays to be more radical than you ever thought necessary...

• Vista Home Basic Edition does install in a dell inspiron 1440.

  I bought a laptop that did not come with an operating system because I happened to have a Vista Home Basic installation disc that came with my previous laptop. so I tried to install the operating system, but after that the display shows "windows is loading files...". "this message appears:

  Windows has encountered an error... file cannot be found or corrupted.

  file: windows/system32/boot/winload.exe

  error code: 0-xC0000001

  What does that mean? I tried twice to reinsert the disc and redo everything but shows same message. is there something wrong with the installation disc? Should what I do to fix this? Thank youi so much.

  Recovery of the computer disks are often related to the hardware of the computer that they came with.

  Also, you have rules of licensing:

  If Vista is preinstalled on your other laptop, it is classified as an OEM license and is not transferable.

  The license of Vista OEM is related to the original computer it is installed on and dies with the computer.
  You cannot transfer it to another computer/laptop

  See you soon.

  Mick Murphy - Microsoft partner

• Vista Home Basic Edition will not start due to the update

  Hi im trying to fix a friends laptop for him it has vista home basic and his laptop is a system of e (ei3103) when the laptop to start trys it loads and then it says configuring updates when it gets 51% then does not far the hardrive light is still flashing away and the busy symbol is still running but everything is never more than this evn iv rest the laptop computer on at night thinking that he just need to time and what SHE WAS A BIG DOWN LOAD IM LOST what to do now

  Hi davelyness26,

  Take a look at this thread similar here, especially the post SpiritX MS MVP with some other troubleshooting.

  I hope this helps!

• Backup "to a network' grayed out for Windows Vista Home Basic Edition

  Dear Forum:

  Vista Home Basic SP - 2, Win XP Pro Service Pack 3 (signed on as "Administrator" on both machines)

  I'm trying to back up data residing on Vista Home Basic machine on a shared drive on Win XP Pro machine on an ethernet network.  When I run backup and restore Vista HB machine, backup "to a network' option remains greyed out.

  From now on, I can read and write in the public records of the Vista machine from the Win XP Pro machine and I can read and write to disk shared Win XP Pro machine from Vista HB machine.

  I apologize if the question has been discussed previously.  I appreciate all help to address this issue.

  -Kevin N

  I'm sorry, but Windows Vista Basic cannot save to a network location.  It can only back up to a local disk.

  Backup to a network location requires a more advanced version of Windows Vista.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• I have Windows Vista Home Basic Edition. I can't install updates - error message A 80071, 30

  Almost all the updates do not settle.  The only one installed is updated security essentials.

  Try to install the updates in a clean boot state:

  http://support.Microsoft.com/kb/929135
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Other suggestions:

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  Diagnose and automatically fix common problems with Windows Update
  http://support.Microsoft.com/mats/windows_update/

• Windows Vista Home Basic Edition, Acer laptop wireless, Linksys router and connect Lexmark X 9350 wireless network.

  I'm tired... I tried everything I can think of, as well as everything I can find online in order to connect my printer Lexmark X 9350 WiFi for my Acer laptop which is connected to my home network wireless via my linksys router. At the same time, the printer has been set up through my existing wireless network and was working properly. (FOR A SINGLE DAY!) Then I got the bright idea to installNorton Anti Virus Security. Since then, my printer stopped working through the wireless network. It works as a stand-alone Copier and fax machine, but nothing of the printer.  I contacted Lexmark via online support, but their suggestions did not work or were so confusing that it would take a computer technology to interpret the instructions to correct the problem. I learned more about the Wi - Fi networks and computer by trial and error, I should be able to re - connect my printer the eyes bandaged.  Help, please... This problem is ongoing for weeks. Thank you so much in advance.

  Just a thought, as you say it started with Norton check his firewall exceptions:

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  Have a read of the link above re Vista file and printer sharing.

  Permissions/Share info is there as well.

  If you use Norton, make that file and printer sharing is enabled in THE Firewall (or LAN enabled, depending on how their Exceptions are formulated in their firewall)

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Vista Home Basic Edition has been reinstalled and I would like to uninstall it

  I would like to uninstall windows vista. We have now old windows with all our files on it and windows with nothing on it. I would uninstall the last installation and simply go back to the old. It's on a lenovo. It's my friends computer.

  Hi, Cheryl l.,

  Your system must have a Windows CD.  Insert the CD and restart your system.  When the press and the button to start the CD-ROM appears, press on and keys.  Install a new copy of Windows.

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• back up and restore Windows Vista Home Basic - reverse did not, access is denied. (0x80070005)

  I tried for months to the opportunity to make a return to the top and I keep getting reminders to do, but the message above is what I get AFTER it went through the whole process.  I have an external hard drive that I have chosen as the backup location.

  Hello

  make backups on an external hard drive or DVD

  see if this information helps you

  How to make a backup of your data (all Vista versions)

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  If you have problems with the repost of process above in forum microsoft link that is specific to the backup below questions

  "This forum supports questions for the default backup utility in Windows Vista, Server 2008 and beyond."

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads