Windows vista Home premium recovery question - how to get the source for windows vista home edition premium as the recovery does not work since the recovery partition

How to get the source to windows vista Home premium recovery is not from the recovery partition and gives me an error message

Advertisement

Hello

Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

they do it for a nominal cost of $

or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

they contain all versions of vista

This is the product key that determines which version of vista is installed

http://www.theeldergeek.com/Vista/vista_clean_installation.html

How to replace Microsoft software or hardware, order service packs and replace product manuals

http://support.Microsoft.com/kb/326246

Tags: Windows

Similar Questions

  • 8600: scan Premium OfficeJet Pro 8600 does not work since the upgrade of Mac to 10.10.1 (Yosemite)

    Since the update of my MacBook Pro in Yosemite, I can't function of the computer analysis to work. I downloaded again the softwear & reinstalled; reset the printer, repaired disk permissions, etc. nothing works. I also note that the HP Utility icon no longer appears.  Print and copy work very well. Any suggestions?

    I tried everything above. When I add the printer driver printer HP (instead of AirPrint) does not show as an option (even if I can find it in my downloads folder). Option is the HP DeskJet that comes with a warning that it cannot be the right driver. Also downloaded what seems to be the right driver on the HP site. He also appeared in my downloads folder. HP utility always not available.

  • HI, I have a sony vaio VGN-CR21S WHAT and I've upgraded to windows 7, but now my motion eye camera does not work what do I do, please quick help

    HI, I have a sony vaio VGN-CR21S WHAT and I've upgraded to windows 7, but now my motion eye camera does not work what do I do, please quick help

    all I need is someone find my phone on the Sony site and that will be a pretty

    http://eSupport.Sony.com/us/Perl/select-System.pl?Director=home&PRODTYPE=24

    go to this site and to detect my model (vaio only)

  • ATI Radeon HD 4600 Series AGP Grapics card does not work since the installation of service pack of windows 7

    ATI Radeon HD 4600 Series AGP Grapics card does not work since the installation of service windows 7 pack has worked before

    Is not fully compatible with win7, some patches are available from ATI

    http://support.AMD.com/us/KbArticles/pages/CatalystAGPHotfix.aspx

  • Hello. I had upgraded to Windows 10, but my printer driver is not compatible. I reinstalled windows 7, but now my acrobat CD player does not work. I can't open it even!

    Hello. I had upgraded to Windows 10, but my printer driver is not compatible. I reinstalled windows 7, but now my acrobat CD player does not work. I can't open it even!

    AND I can't uninstall it.

    I discovered that DC is an APP.

    What I really need to upgrade to windows 10 again to uninstall acrobat and then reinstall windows 7, so that I can print my PDF?

    Or is there a quicker way?

    Thank you.

    Connie

    He continues:

    Still, I couldn't install Adobe Reader. He wanted to write, she already existing on this computer!

    Even if she had removed the ikon office and Control Panel!

    Then I remembered something I have tried before but forgotten:

    I downloaded "Revo Uninstaller"! Excellent program! It works every time!

    I choose the advaced option and asked him to remove all the files from Adobe. He found 1.275 left files!

    It worked!

    I could reinstall Adobe Reade, r and I can open my PDF once again :-D

  • Recover Windows 7 family premium but license key does not work

    Hello

    My HD crashed on my laptop HP, so I got a new one and managed with the help of a friend to get Windows 7 Home premium installed again, but provided with my HP laptop product key does not work, how is it?

    Thanks for any help

    / Jan

    When you request support, please provide the model name and product number complete (p/n) of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

    The information requested above are on the bottom of your computer, inside the battery compartment or on the BIOS boot screen. Please see How can I find my model number or product number? for help more to find this information. DO NOT include your serial number. Please enter the product/model information consumer HP Online Support page and post it here for our review.

    Please use the support of HP recovery, you created when you first you computer Configuration. If you don't create this media, please contact the official support HP customer in your region / country, via the Portal Support HP's worldwide, to see if the HP recovery support is available for your computer.

    If you found "recovered" or the Windows product key from the old hard drive, it will not work. The key to the used factory also requires a SLP/SLIC 2.1 BIOS and an appropriate OEM SLP/SLIC certificate.

    Alternatively, if you can still read the 25 characters on the COA affixed Microsoft Windows product key at the bottom of the computer, you can install Windows 7 Home Basic by using this key. Please see "how to install Windows 7 without the disc" to get instructions on how to download Windows 7, create the installation media and install Windows 7 using the product key 25 character of the COA Microsoft on your computer. Please note that this facility is not all customizations of HP or HP value-added that was original installed on your computer. Also note that you will need to download and install most of the drivers from the HP support for your computer page.

    Windows 7 SP1 can be found HERE and HERE.

    Direct link to Windows 7 USB/DVD Download tool. Use this tool to create a bootable DVD or USB Flash drive from windows. ISO

    If you have any other questions, feel free to ask.

    Please click the 'Thumbs Up' white LAURELS to show your appreciation

  • Update caused Windows Blue Screen of Death. Suggested fix does not work.

    In February, my Sony Vaio laptop has been updated automatically by Microsoft and now it does not start.  I followed all the instructions in this thread

    (http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/73cea559-ebbd-4274-96bc-e292b69f2fd1/#e9b28c45-635c-4adf-8d24-817bf39c207b)

    but when I get to the point where I need to type some commands, uninstall, My Favorites keys displayed on the screen and I'm unable to type the codes or move forward.  As you can tell long time between when this problem occurred and that now, I gave up in frustration for a while but I simply could not live without my cell phone any longer and I'd rather not pay someone to fix this.  Any ideas or suggestions?

    Hello subvertdonthurt,

    All if suggestions published in the forum http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/73cea559-ebbd-4274-96bc-e292b69f2fd1/#e9b28c45-635c-4adf-8d24-817bf39c207b do not work for you, do a restore of the system from the Recovery Console.

    Here's how:

    Step i. access the recovery by using the OS CD console. As already suggested, you must have your OS CD to repair. (Or the image that you created the instructions above).

    To run the Recovery Console from the startup of Windows XP or the Windows XP CD-ROM diskettes, follow these steps:

    Insert the diskette of starting Windows XP in the floppy drive, or insert the Windows XP CD into the CD-ROM drive and restart the computer.
    Click to select all of the options required to start the computer from the CD-ROM drive if you are prompted to do so.
    When the "Welcome" screen appears, press R to start the Recovery Console and follow the process until you get to the recovery console command prompt.screen.

    STAGE II. At the Recovery Console prompt, type the following lines (in blue), and then press ENTER after.

    1 cd-(Note: between "cd" and "------" there should be an 'empty space' or still command does not work)
    2 cd system ~ 1\_resto ~ 1

    If it gives an error "Access denied" when accessing the folder, follow the method below

    CD.
    CD windows\system32\config
    ren system system.bak
    output

    Restart the computer, and then follow step I.

    3 dir

    When you hit it will list all records of points of restoration as rp1, rp2... we see the last restore point to copy the file from a recent backup. If the restore points have more than one page, then you keep pressing the key to display the last restore point folder. Use the other to the last restore point. (the last restore point is maybe damaged)

    4 cd rp {the next to the last restore point only.} (Note: example: cd rp9, if rp9 is the next to the last restore, point where the last restore point n = 9)

    5 cd snapshot

    Now, the command prompt will look like this c:\system~1\_resto~1\rp9\snapshot > ( Note: restore point 9A assumed for the clarity of the content, you must go to the next to the last restore point folder, as described in the previous lines) now according to the error message to copy the appropriate file in the restore point folder.

    6 copy _registry_machine_system c:\windows\system32\config\system
    7. Type Exit, and then press ENTER.

    I hope this helps.

  • Windows 7 Professional, DirectInput issues and software that does not work

    A little history: I have Vista Business installed and about 1 1/2 months, I've upgraded to Windows 7 Professional. I attend game and Sim classes that require me to use the Torque Game Builder, Torque Game Engine and Builder of couples of programming. I got Torque Game Builder and constructor not installed with Vista which game me no problem, I upgraded to Windows 7, installed torque game engine. First worked. Recently installed UnRealEd, 3DS max, Maya, Mudbox, MotionBuilder, all work ok. In 2 weeks, when I try to launch the products of couple, they do not work. They appear in the process, but they do not work, when I run in compatibility mode, disable visual themes and disable the composition of the bureau, run as admin, the screen flickers, past at the base, the program does not work. I've updated ALL my drivers from the manufacturer with the last site, I rolled back my drivers to the previous version, I performed a complete installation of Windows 7, tried using a virtual XP Mode machine and create a partition and have a dual boot with Vista business as well. All program worked in a first time in Windows Vista, but not 7. I could also access the program installed in Windows 7 drive and he would run as long as I was on Vista OS. I would then run DXDiag, when it runs, I get, 'DxDiag has detected that there may have been a DirectInput access problem last time that this program has been used. You want to bypass DirectInput this time? "I checked both BONES and found this to be the same issue. I don't remember when I ran the programs recently on Vista and I did a DXDiag, I had data entry.

    Now, I did too, the last Installation program installation of DirectX web and Auditor files system who finds no problem

    My system configuration is:

    Dual Boot: Windows 7 Professional, Windows Vista Business
    AMD 64 + 5000 double
    nVidia 8600 GT
    2 GB memory

    The only other program I can tell who has a problem is UnRealEd... all my work of Autodesk products.

    lydic539,
    As Jason done you some MSDN articles, I suggest you post you are questioning in this forum that it is a resource for developers.
    MSDN Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Update Vista error 80070507 and peripheral system that does not work

    Title: updates Windows Vista installs not because of error 80070507 and there is a system feature that does not work, but I don't know that that or how to fix it.

    Windows Vista updates do not install due to error 80070507.  He also seems to be a problem with a device in the system does not and I do not know that who or how to fix it.  Had to do a system restore not so long ago and I've had problems since.  Help, please.

    Hello

    -You are aware of any changes made on the computer before this problem?
     
    Perform the steps from the link below and check if the problem persists.
    Problems with installing updates
     
    Hope this information helps.
  • ENVY 15 t-j000 quad edition cto: outputs audio switching does not work in windows 10 birthday when the headset is connected

    Hi guys.

    As you know in 10 anniversary update windows, you can switch between outputs sound when the headphone is plugged directly from the sound icon in the taskbar, but it does not work as it should. If the headset is unplugged then the sound comes from the speakers and they are plugged in when the noise is coming from the headset and I can't select speakers. It shows two devices, but when I select one of them the speakers are selected. Also I tried to playback devices, but still, I can't put the headset as default playback device. She is forced to be like the only communication device. I've updated the audio driver but nothing has not improved. My audio driver is codec IDT high-definition. In addition, I tried the generic driver from the sound of microsoft, which is called "codec high definition audio" and it shows a device like speaker and it doesn't detect any helmet or communication device. So, what's the problem? I am able to use this option of windows 10 birthday or not? If yes how? I need this option because I use a headset a lot and I don't want to plug them each time. Thank you for your attention. I can give additional information if it is needed and I'm hear to help.

    Hi David,

    If you remember, I had problem with the IDT driver after upgrade to windows 10 and other updates. I'll be back to tell you good news. Finally, I solved the problem partially and I'll explain what I did.

    Today, I found that there is some audio drivers in the microsoft catalog site, so I went out there and looked for a codec high definition audio. A list came and saw that there are three tempo IDT Audio driver that are compatible with windows 10. They are all IDT Audio driver version 6.10.6504.0 and they are made in 2015. I downloaded all the drivers of three and tested. The first two of them does not solve my problem but the last which is "Tempo driver update for codec IDT high-definition" made in 08/05/2015 with 13.1 MB did the job. I must mention that you need to install this driver on generic windows sound driver for good results. If you install hp IDT drivers probably do not get good results. After installing this driver now I am able to switch between outputs audio (headphones and loudspeakers). The driver can detect my headset exactly as what it is. He shows me an output until I plug in my headphones and it then adds another exit in the helmet. I put my headphones or internal speakers as default playback device which I couldn't do with other drivers. There are just two problems that does not matter much to me, and I can't ignore them. The first is the light of the button mute on the keyboard does not work with this driver which is not very important, and the second is that there is no Equalization of beats in this driver and instead there is an audio driver IDT, which is very similar to the equalizer, but it beats not affect only the internal speakers the headphones that is more important to me because the sound via the headphones is very clear and good. If there was some ablity to HP to change this driver and add audio beats and allow also the light on the button mute then it would be perfect. The link for this driver is here:

    Driver IDT tempo for windows 10 and put on subsequent day

    Just download the latest driver with 13.1 MB size and enjoy.

  • Windows 7 - microsoft so far and now internet does not work

    As usual, an update came on my computer and I downloaded it.  And now my wireless does not work. It tells me that there is a wireless connection, but not the internet.  I tried to restart the modem and still nothing, and I know it's a problem with the bc computer other computers in my House have an internet connection. I tired to restore the computer before the update and it wont let me restore bc if some anti virus.  How to bring back my internet service?

    * original title - two days ago, I did a regular windows/microsoft date and now my internet does not work. Help? *

    Click Start, type: Troubleshooting

    Press enter on your keyboard

    Search for "Internet connection".

    Return of results, double-click the Internet connection

    Follow the wizard to display on.

    Resources:

    The problems of network Windows 7 http://clkon.us/bJtkA0

    Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

  • Bluetooth does not work since installing Vista SP2

    I have a HP Pavilion dv6 1128tx laptop.  It has bluetooth built-in and used to connect to my phone without problem.  I recently upgraded to Vista SP2, and since then, bluetooth does not work.  In the control panel when I click on bluetooth devices it does not connect, and when I click on bluetooth, nothing happens.  I downloaded the latest drivers from HP, I installed it is said in the end the process there is no bluetooth device installed and the only option is to cancel the installation.  I've been on microsoft site http://support.microsoft.com/kb/960531/ where I used the option "fix it for me", which has removed the option of Control Panel devices and I don't know how to fix this!  I followed the instructions from HP on this page http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=au&product=3938840&docname=c00915262, but I don't see anything on bluetooth technology on the Device Manager page.

    Any thoughts? !  Ta!

    HELO JosieC, welcome.

    In Device Manager, there are all the devices with a yellow mark ! next to them? Is there an 'unknown' devices listed?

    You could try the system restore to restore the computer prior to the installation of SP2.

    1. click on START
    2. Type "System Restore" (without the quotes) and press enter
    3 follow the prompts to restore your system to a date BEFORE the problem started

    Let us know what happens

    Thank you! Ryan Thieman
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • now, my home button reads "homeButton.label;" and does not work. Help. Thank you...

    I have on my computer, looked up and saw this "homeButton.label"; on my home button.
    I can't get rid of it in tools etc and it does not work as a command. I press to go home, in this case google, but it does nothing. At the bottom left of the page, it simply says 'Done '.
    I am at a loss to explain it.
    Anyone?
    Thank you
    SL

    You have this problem when running in Firefox SafeMode?
    http://support.Mozilla.com/en-us/KB/safe+mode
    Do not choose anything at the moment, just use 'continue in safe mode.

    If this is not the case, see this:
    http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+theme...

  • HP revolve 810 G1, Windows 8.1, screen auto-rotation of images does not work

    I'm sure I can't be alone in having improved my G1 810 turn Windows 8.1.  However it is therefore more useful tablet as the rotation of the screen does not work.  The auto spin button does nothing and after an HP engineer swapped botht huh card system and the button they said that the only option is to return to Windows 8 (original shipping OS).

    Really, this isn't a usable solution when you want the new features of Windows 8.1 update.

    My G1 of 900 ElitePad works well on Windows 8.1.

    Can it really be difficult to get the drivers right and tested?

    Someone at - it a Windows 8.1 working solution?

    Hello

    decommissioning of the Bios to F.44 and auto-rotation should work again (for me it worked).

    I found this working solution myself, HP could not help me anyway.

    Be aware, that the Bios F.44 didn't put heat-settings update as F.47, so you'll have a noisy fan

    HP couldn't tell me when there will be updates of Bios or drivers updated.

    to ensure that automatic rotation is also running Windows 8.1.

    Hope this information helps you...

    Kind regards

    Alex

  • HP 110-243w downgrade to windows 7 64 bit hp usb controller driver does not work.

    I finally got the graphics drivers to work but now can't seem to find the driver for the usb controller. the one on the hp site does not work. work of USB, but I'm assuming that this id for the s 3.0 I have not tested because I have and devices usb 3.o. but he has a! in devie Manager. Thanks in advance.

    Hello:

    Download and install the AMD chipset drivers and restart.  You want the first file on the Web page.

    http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

    If for any reason any USB 3 drivers still don't get installed, then download and install these drivers and reboot.

    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_123787_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118744_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

Maybe you are looking for

  • said its opening, but it's not. It is not yet on the Task Manager?

    tried to open Mozilla Firefox, but it is not appearing on my screen, the symbol does not appear in my start bar, and Manager tasks didn't pick up any sign of it. but when I tried to uninstall it, a pop-up explains how it works.

  • Help for DeclareThreadSafeScalarVar

    I have problems using DeclareThreadSafeScalarView. In my header file, I have the following: DeclareThreadSafeScalarVar (int, RunUserInterface); I have two source files different procedures I refrence the variable 'RunUserInterface. In a single file w

  • Printer all in one: HP printer upgrade

    Hi people, it seems that the printer all-in-one Photosmart 6520 was discontinued. As a result, I want to upgrade if possible... any suggestions? In addition, it must be compatible with Windows 10 I have on my laptop. In addition, I have several 364XL

  • NTFS drive got converted to RAW disk

    My NTFS driver converted to RAW and I can't access it, would you please help? How I can access without lossing my data!

  • Creative cloud isn't loading apps

    Hello, I have Adobe Creative Cloud 2.2.0.129, and whenever I open the menu, it does not load the House, Apps, or community. Can someone help me with this?


HashFlare