Windows Vista HP serv.pk.1 + 2, repair, file repository using ck.disc, prob. & solutions etc.
I have recurring problems with the menu problems and solutions, problems are reported, but I don't know if they are resolved. The biggest problem cost me a lot of money and is not yet resolved. Is that a lot of people know, it's when you self-test repair my computer, or start or menu when the disc check is run. This is the problem where the lines scroll quickly until they reach the line where it says something like ckcrdisc... and just, it hangs and stop to scroll through the rest. I remember when I got the program first and used scroll for a long time. I've seen this question asked several times but no REAL ANSWER or the INFORMATION of MICROSOFT CO. ITSELF? Why not? Is this some sort of Ministry of defence question? Could someone please help me with an honest answer to these?' s. because until this point I was VERY happy with my Windows Vista program, same door to Best Buy where I bought the computer and the program was originally installed and they charged me $60.00 to use my disc and 'fix' that I knew how to do it and lost my photos and some information of 3 years. But I'm not a loyal customer it more because they said it was working fine now. Answers are appreciated please. Thank you, John Blair * address email is removed from the privacy *.
Hi Blair, j.
· What problem in the face that you were invited to use reports on the problems and the Solutions Center?
· What was the result which was provided in the history of the problem?
Try the methods below:
Method 1:
Download and use the utility of diagnosis of hard drive on the site Web of the manufacturer with a check, if this can help. You can download from the link below: http://h10025.www1.hp.com/ewfrf/wc/genericSoftwareDownloadIndex?cc=us&dlc=en&lc=en&softwareitem=pv-68105-1&jumpid=reg_R1002_USEN
Method 2:
Check your hard disk for errors by temporarily disabling the security software installed on the computer.
You can check the link for the procedure below: http://windows.microsoft.com/en-US/windows-vista/Check-your-hard-disk-for-errors
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Tags: Windows
Similar Questions
-
How can I repair my Windows Vista TOSHIBA laptop without lossing all my files?
original title: How can I repair my Windows Vista TOSHIBA laptop without lossing all my files?
I would like to repair my Windows Vista Home Premium 32-bit TOSHIBA laptop, because, as I said in my other earlieron of the question in the day ("How do I SAVE my user accounts on an external hard drive" ") does not my Systerm programs. More of this issue, I would like to know how to fix my laptop. Which breaks it was that I installed the Pack 2 of Vista Sevice! Dose anyone have any idea on how to fix it?
Will324
I would like to repair my Windows Vista Home Premium 32-bit TOSHIBA laptop, because, as I said in my other earlieron of the question in the day ("How do I SAVE my user accounts on an external hard drive" ") does not my Systerm programs. More of this issue, I would like to know how to fix my laptop. Which breaks it was that I installed the Pack 2 of Vista Sevice! Dose anyone have any idea on how to fix it?
Will324
Hey Will324
link below has how to do a vista repair install
It is made of wihin a vista operating system
you are not for this toshiba recovery disk
you will need to borrow a dvd microsoft
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html
or backup your data and reinstall
Contact the computer manufacturer and ask them to send vista recovery discs
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp
they do it for a nominal cost of $
also ask them if you have a recovery partition on your hard drive to get back to the way you bought
you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer
Ask them of the exact key sequence
Save all data, because it will be lost, do the above
Walter, the time zone traveller
-
I've upgraded to windows 7, the upgrade requires a previous version of windows must be installed before it can be used.
When I installed the upgrade first, it worked perfectly, unfortunately I do not have a set of recovery discs before upgradeing from Vista to 7 (stupid I know!).
I bought the components to upgrade my PC and want to reinstall windows, but cannot without Windows Vista Home Premium disc, and I can't find anywhere to download them, or find someone willing to let me copy their discs (I only need a copy discs, I have my own serial number).
True to form, I also forgot to make disks of backup to my laptop before it got a virus (edition windows Home premium), feeling very stupid.
If anyone knows where I can get copies of these discs, it would releive a lot of stress.
That you have a legable Vista product key, then use these installation files to make a .iso and then bootable DVD/USB as shown here:
This will install Windows Vista with the activation of the phone. Note using your Windows 7 update product key directly with the good Windows 7 .iso file directly should work and you should not need to install Vista. You can, or perhaps not to activate by phone.
-
How revrt to original windows vista by default for self-extracting zip files
my vista does not automatically extract the zipped files
How can I revrt to original windows vista by default for self-extracting zip files
my vista does not automatically extract the zipped files
How can I revrt to original windows vista by default for self-extracting zip files
Take a look at this tutorial
Support of zip files - restore
http://www.Vistax64.com/tutorials/65254-zip-file-support-restore.html
Recommendation:
Try the 7-Zip program. It's free, widely used and highly recommended.http://www.7-zip.org/download.html
ATTENTION: the download link is a 32-bit and one for 64 - bit. Make sure you choose one that suits.
-
I lost my disc of Windows 7 Home Premium 64-bit OME. Can I use a disc of Windows 7 Home Premium Family Pack 64 - bit with my product key to make a re-install?
My father still has his Win 7 Home Premium Family Pack disc left, would that be a problem using it.I lost my disc of OME, but I got the product key on my PC, so I still have that.Or if there is another way to re - install Windows without a disc?Kind regardsPeterHi Peter,.
Yes, you can use the same product key when reinstalling windows.
Note: If you are facing a problem while activating, I recommend you contact the factory system since you are using an OEM computer.
-
Windows Vista Service Pack 2 and Startup Repair prevent my laptop to turn on.
My laptop is running slow so I thought that I would need to update something. It suggested that Windows Vista Service Pack 2 so I started to update, but I remembered that my previous laptop was having problems with Windows Vista Service Pack 2 so I canceled the update.
I then turned off my laptop later and now when I turn it on it goes to 'Launch Startup Repair', I have let this happen, but can not solve a problem.
I then tried "Start Windows normally", but it goes back to restart and on-screen 'launch Startup Repair '.
Then I tried to boot into 'Safe Mode' = nothing
I tried restoring the system but there is no date available, and he said something like "there is no diagnostic tool.
I don't know what I can do!Hi carlywray,
Your computer came with Windows Vista preloaded? If so, contact the manufacturer for the disk recovery or a method of recovery of your operating system. If you have purchased a full copy of Windows, see this Microsoft document.
Dena
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
When I start windows, the message that I get a black screen is Windows (Vista) cannot start because the file is missing or corrupt:
\system32\ntoskrnl.exe. Please reinstall a copy of the above file. I tried to launch a system of diagnosis without a disk and everything going on. I then tried running windows in safe mode and it won't allow me. That's when I switched to an installation disc supplied with the system. I tried to recover the system from there, but it would not go beyond the option of choosing an operating system. Once I got to that screen, there was NO operating system choose.
I tried to restore my computer and there is no restore point.
I renounced restore my computer and thought I'll all start over and install windows vista all over again. This was not the case either. I followed these steps:
Turn on your computer and insert the CD or the DVD of Windows Vista.
Install Windows page, follow all of the instructions that appear, and then clickInstall now.
On the Get updated important for installation page, we recommend getting the latest updates to help ensure a successful installation and to help protect your computer against security threats. You will need an Internet connection to get the installation updates.
On the Type your product key for activation page, we strongly recommend that you type your 25-character product key in order to avoid problems during activation.
On the Please read the license terms page, if you agree to the terms of the license, clickI accepts the terms of the license.
Follow the instructions on each page. On the type of installation do you want? page, clickCustom.
On the place where you want to install Windows? page, select the partition where you want to install.
Click next to begin the installation. You can see a compatibility report.
and then had this error that says;
windows doesn't have can create a partition on disk 0. The error occurred when preparing the partition selected for installation. Error code: 0x80004005.
Now I am stuck and don't know what to do.
Someone at - it solutions for me. Help, please.
Hello
1. on which the drive was initially installed OS?
2. What partition you selected to install Windows?You can try to perform a startup repair by using the Vista installation disc.
Check out these links for help:
http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questionsHow can I fix a startup (startup)?
http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problemWhat to do if Windows does not start correctly:
http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctlyWhat are the system recovery options in Windows Vista?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-VistaIf nothing helps, so please get in touch with the system manufacturer for assistance because it may be a hardware problem.
Kind regards
Afzal Taher - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think. -
I don't know when this problem occurred. All of a sudden I lost sound on my Windows Vista Business System. In trying to find a solution to this problem, I went to the Microsoft Fix - It Center and downloaded the troubleshooting Fix - It. After insalling the Fix - It store and then you try to run the program an error code indicating: "C:\windows\System32\dssenh.dll is not designed to run on windows or it contains an error. Try to install the program using Intallation to original media or software to support provider or system administrator. "before you begin to solve the problem, as well, I decided to create a restore point, then I went to windows update and had an error code: 802440F when you try to update. Go to the Microsoft site and then try to download the updates manually it immediately opens the automatic update dialog box and activating returns the same error code: 8024402F. After reading the list of error codes, the closest codes of this number were 8024402C and 80244022
and the main board seems to rerun the update with the firewall shutdown, then restart the firewall after the download. I did this and still have not solved my problem. I think I have a sound card problem, but would not interfere with the automatic windows update. I then tried the option repair on windows vista drive still no luck.
Hello
I had the same problem and I tried the steps in the following article and it worked for me.
http://support.Microsoft.com/kb/900936
http://support.Microsoft.com/kb/883821
http://support.Microsoft.com/kb/836941
All the best!
-
How can I get Windows Vista to stop the shortening of long file names?
I copy the files with long names in .zip files. Whenever I drag a drag the file to .zip (also with a long name) file, it renames the .zip file in a much shorter name. This only happens on my computer, my wife can perform the same task that I'm with her computer, and it won't rename the file name. We're both under Windows Vista. Is there a way I can get to rename the files? Thank you!
Hello
Did you change your computer?
I suggest you to check the status in safe mode and perform the clean boot and check.
Method 1:
Advanced, including safe mode startup options
http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
Method 2:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
Method 3:
Create a user account
http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
Difficulty of a corrupted user profile
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
The names of files and file name extensions: frequently asked questions
-
So all this started because I tried to clean my computer to give to a friend. I tried refomatting the hard drive, but something was wrong here. After that, when I turn on the computer I get a black screen with message Bootmgr missing. I read a little inside and saw that I could download a Windows Vista recovery disk because my computer did not come with one.
After that I downloaded and burned the ISO image to a CD, things started looking better. I got to the screen when you select the language and keyboard. Then install windows screen. My options there were 'Install now' and 'repair your computer '. When I try to install, I put in my product key that seems fine. The next message I get is "Windows cannot open the required file E:\Sources\Install.wim. The file does not exist. Make sure all files required for installation are available, and restart the installation. "Error code: 0 x 80070002.
When I try to repair, he said "select an operating system to repair, and then click Next."
Operating System: Windows Vista (TM) Home Basic (recovered)
Partition Size: 34318 MB
Location: (D :) ACER
If you do not see your operating system listed, click on load drivers to load the drivers for your hard drives. I try to select Windows Vista retrieved and clicked Next, but what is said "this version of system recovery options is not compatible with the version of windows that you want to repair" or get a recovery of tools such as repair system, System Restore, complete pc windows, tool windows and command promy memory diagnostic restoration. the only problem is he says operatins system: (unknown) unknown local disk...Any help would be appreciated. Really want to give my friend a laptop that wont even turn on. Laughing out loud
Was it Neosmart?
This isn't an installation disc. It's a record of startup repair!
You use the repair disk option, not Install.How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.
There is no Vista free download legal available.
https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer
Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.
Normally, they do this for a cost of $ small.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.
See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.
Normally, you have to press F10 or F11; Acer is in some models Alt + F10 at startup to start the recovery process...
Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.
They will tell you how to do this.
Every computer manufacturer has their own way of making recovery disk/s.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.
If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
http://support.Microsoft.com/default.aspx/KB/918884
MS advice on the conduct of clean install.
http://www.theeldergeekvista.com/vista_clean_installation.htm
A tutorial on the use of a clean install
http://www.winsupersite.com/showcase/winvista_install_03.asp
Super Guide Windows Vista Installation
After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.
Save all data, because it will be lost during a clean installation.
See you soon. Mick Murphy - Microsoft partner
-
XXXXXX
Hi Randy,
Welcome to the Windows Vista answers Forum!
I have a few questions about your concerns:
(a) game in which you try to read?
(b) is this the case with all games or any game in particular?
(c) you are trying to play the games that are built with Window Vista?
(d) what version of Window Vista do you use?
You can also try the suite of measures to define the association:
1. open the control panel. (Classic view)
2 click the default programs icon.
3 click on the link associated with a file type or Protocol with a program . (See screenshot below)
4 click the extension file type to change which program .exe association opens. (See screenshot below)
NOTE: It may take a while to load up5 click on change program button.
6 if the list, select the program that you want to be associated with (opens) the file extension. (See screenshot below)
(A) check the always use the selected program to open this type of program , and then click OK.
7 if the program is not listed, then click the Browse button and navigate to the .exe of the program you want to default to open the file extension.
(a) select the program.
(b) click on the Open button
(C) check the always use the selected program to open this type of program and click OK to apply.
This should solve your problem.
Hope this information is useful.
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Sony Vaio - necessity. "Windows Vista Home Premium OEMAct" in the ISO file
Hi, works on a laptop and I need to reformat to origonal it's "factory" operating system.
"He has a sticker on the bottom that says: Windows Vista Home Premium OEMAct".
I just need the link, so don't waste your time by posting information on how to help me 'know how' to make the file on a startup disk.
I have a product here on this sticker key but no disc. Could someone please help me with a link to download the. ISO file so I can create a boot disk and remove everything so I can do it all the 'new' again?
It's a Sony Vaio laptop.
It is the last of the legal and reliable Vista online download links.
Read the last part of my first answer on Microsoft Vista DVD and contain editions DVD of Microsoft Vista.
-
Original title: activation problems.
After installing Windows Vista Ultimate 64-bit on my laptop, he asks now the product key to activate windows. He won't accept him, indicating that the product key is already used on another computer. It is not the case! What can I do?
Hello les1helen,
If you get a message that the product key is already in use then the next step is to use telephone activation. See this link from my Web site: http://vistasupport.mvps.org/product_key_already_in_use.htm
This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.
John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com
-
Windows Vista tells me that my product key is already used and he locked.
Vista ultimate Windows... Hi, the product key has been used. Used by me!
Hey, shot to the top of the laptop to see a dialog box indicating that the product key is used and it is locked. I use the key it's mine. What should I do?
Try activating by phone and see what you get messages. Click on start and type "slui 4", then follow the instructions.
-
any info on this would be great thank you
Hello
I suggest you to consult the following Microsoft article.
How to activate Windows Vista:
http://support.Microsoft.com/kb/940315Activating Windows: Frequently asked questions:
http://Windows.Microsoft.com/en-us/Windows-Vista/activating-Windows-frequently-asked-questionsHow to find a phone number for a Microsoft Product
Activation Center:
http://support.Microsoft.com/kb/950929/How and when to contact Microsoft and support Customer Service:
http://support.Microsoft.com/kb/295539Genuine Windows: Frequently asked questions
http://Windows.Microsoft.com/en-us/Windows/help/genuine/FAQHope the information is useful.
Maybe you are looking for
-
HP 15-d103 found NIC controller/driver
Sir my hardware/device id are:PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C & REV_01PCI\VEN_168C & DEV_0036 & SUBSYS_217F103CPCI\VEN_168C & DEV_0036 & CC_028000PCI\VEN_168C & DEV_0036 & CC_0280Please give me the link to download driver for network contro
-
Problems with Toshiba Flash cards
I have problems with toshiba flash Cards on my desk and stay there. It says flash cards, not reponding, but I can't get rid of it. This utility is really necessary to make my computer work correctly? How can I get it out of my office?
-
I can't install Macromedia Flash 8 in my windows 7
I am a flash designer and flash is a bare necessity for me. I recently installed windows 7 the virut virus that "co - incidentally" does not seem to affect vista or windows 7. I tried to install Macromedia Flash 8 on windows 7, but it stops at 0% of
-
Windows 7 keeps closing after updating to iTunes
For the last month or more, windows 7 periodically stops. It seems to be the case after the opening of the itunes lates verson. Does anyone else know this problem?
-
No other way to assign a text value number other then: block.item1?
Hi allIn forms 6i, is there no way to value a text number other then ': Block.item1': = value?There is a built-in function?Thank youREDA