Windows Vista Impossible to check updates

My computer is unable to check the updates seems to be stuck configuration update June 19, 2012. I tried the fix tool but no error code 80080005 successshows ideas please?

Fact: Applications, (Norton and McAfee) are known for do not uninstall or upgrade properly. The 'leftovers' Norton is the most likely culprit here. Roll up your sleeves & cross your fingers...

ACTIONS

[You may want to print these instructions for reference offline. IMPORTANT-don't SKIP ANY STEP online & to perform all the steps in a 1 session uninterrupted - to allow a minimum of two (2) hours!  [If a step said to restart, restart! ]

1 right-click on the link, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

2. close all open applications (that is, anything with an icon on the taskbar).

3A. restore backups of ARO Advanced repair all (if any), and then restart.

3 b. Uninstall ARO Advanced repair 2011 [Yes, even if you paid for it!] & restart again. [1]

4. After completing some you have a copy of your key of handy product, uninstall Norton 360 and LiveUpdate and all Norton Add ons via Start | Control Panel | Programs: Programs and features.

5 IMPORTANT! -Online enable WF immediately after the reboot!  [Should be automatic, but I want you to check.]

NB: Now you're "working without a net": do not to ANYTHING else online (e.g., navigation reading E-mail; cat) until you have finished step #8 below!

6. right click on the file that you saved in #1 above and select run as administrator to run the utility, and then reboot again.

7 do a clean install of Norton 360 Version 6.x (using your product ID, if need be; the upgrade is free) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

NOTE: do NOT activate or install Norton modules or toolbars (for example, Norton Anti-Phishing) immediately.

8. manually and repeatedly run LiveUpdate (Norton) until you get a "not more than updated" or similar prompt.

9. right click on the following link and SAVE the download to your desktop: http://iefaq.info/attachments/133/ie8-rereg.zip [2]

Note: Good for IE9 & IE7, too.

9. right click on the file downloaded in # 9 a above (that is, ie8 - rereg.zip) and EXTRACT its contents to the desktop. This will create a new folder on your desktop named ie8-rereg.

9. close all open applications (that is, anything with an icon on the task bar), open the new folder created in # 9 b above, double-click on the file ie8 - rereg.cmd to run the script and restart.

10. reaffirm Internet Explorer as the browser in the default CUSTOM (<>) Set Program Access and defaults of the computerarticle. [3]

11. open Internet Explorer (only!) to http://support.microsoft.com/kb/923737 [ignore the warnings of DO NOT APPLY and the section will APPLY to] & run the difficulty.

Note => for best results, check the option Remove personal settings .

12. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [ignore the title & symptoms].

12 b. IMPORTANT!-online make disappear/close the pop-up window that offers the Windows Update troubleshooting tool! -then...

12. ignorant of the "not recommended" or similar warnings, run difficulty he 50202 in DEFAULT modes and AGGRESSIVE. [4]

13 reset once more.

14. download Adobe Flash Player v11.4.402.287 installed. Open Internet Explorer (ONLY!) to this page-online http://www.adobe.com/go/getflash

Beware of the pre-selected options to install unwanted third-party software (e.g., McAfee Security Scan Plus;) Google toolbar; Google Chrome).

15. your version of Java is badly outdated & submitted to thousands of security vulnerabilities. Download Java Version 7 update 9 installed & all previous versions (for example, v1.6.0_33) removed as soon as possible!  Follow the instructions here-online http://aumha.net/viewtopic.php?f=26&t=46326

15B. When finished, remove your Java cache by http://www.java.com/en/download/help/plugin_cache.xml

16 restart one last time, then run a manual check of updates & see if you manage to install all Security updates offered (e.g., KB2744842, KB2724197, KB2661254 & KB2749655); Follow all the instructions.

17. in response to this post with a status report.

Good luck!

TIP: Consider upgrading to Firefox v16.0.1 or just uninstall Firefox.

=========================================================
[1] injudicious use of registry cleaners can play a role here. TIP: If you still think again your registry database must be cleaned, repaired, amplified, to the point, healed, twisted, fixed, enlarged, "swept" or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions. See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

[2] trust Source: http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en

[3] after that we ended up this thread, do not hesitate to reaffirm Firefox as a default if you wish.

[4] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

Tags: Windows

Similar Questions

  • Windows (Vista) Impossible to check updates, 80244004 error code

    My system shows status bar that updating windows icon with the message "Windows cannot check for updates. When I run the update of windows is gives the error code 80244004.

    In the last weeks, I tried several times to solve this problem, but in vain. I don't know how many suggestions I've tried, but here's a list of some of them:
    -Cleanboot,
    -Fix for windows KB947821 (update tool system),
    -Microsoftfixit.wu.LB139301626980876022.3.1.run.exe,
    -Microsoftfixit.wu.MATSKB.run.exe,
    -System File Checker,

    There is a bit of history for my laptop which can be substantial. The last three years, that my cell phone was in the closet due to a graphics card problem. Recently someone has managed to solve this problem and I might start again using my laptop. At first, I tried to make updates, but ran into the problem that the clock of the computers was completely obsolete. After resetting the clock to the time I was able to do some updates (don't remember those who however), but it just shows how much time the laptop was not in use.
    I first noticed the windows update problem when I saw the windows Defender Update icon in the system tray. I managed to solve that with a manual installation method. But I was not able to solve the problem of Windows Update.

    Windows Update displays "check more recent updates 14/09/2010" and below that it shows "updates have been installed 13/08/2013.

    According to the "history of the updated" the following updates have been installed since my laptop worked again:
    -Microsoft .NET framework client profile 4 for windows vista x 86 KB982670, date of installation 08/13/2013.
    -Update for windows KB928439, date installed 25/08/2013,
    -Multiple copies of the fix for windows KB947821 (analysis of system update tool).

    It was the last before update:
    -Update for windows defender KB915597 (definition 1.89.1145.0), date 09/07/2010 installation.

    I am running windows Vista Edition Home Premium x 86 SP2 on a laptop Acer Aspire 9303.
    In some database posts I've read on an anti-virus program ESET causing problems, but I do not run it. I have Malwarebytes, SUPERantispyware, CCleaner, Spybot and TDSSKiller.
     
    Can someone suggest a method step by step to solve my problem?
    Thanks in advance.

    Roland

    Hello

    I only see the answer from here-

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_update/Windows-Update-will-not-work-getting-error/d0ba46ff-64d7-402A-a9d8-82e03c84e4db

    We know if that helps.

  • Update Windows Vista crashes with 'check updates'

    Last month, Windows Vista updates began to hang on to the 'check updates'.

    I have: 1. tried all the fixes I could find.
    2 reloaded Vista with SP1 from a recovery partition.
    3 update worked until SP2; SP2 downloaded and installed OK.

    4. then, the update said I need latest update agent (7.6.7600.256). Downloaded and installed OK. At this point, the Windows update fails.
    5. If I uninstall SP2, but let the agent update, it works. When I reinstall SP2, it fails.

    6. I have installed a completely different image of Vista - this one was integrated in SP2. This version fails in the same way.

    7. I ran SFC, CHKDSK, System diags, updated all my drivers updated BIOS and replaced the memory. As far as I can tell this is the only thing that does not work on my PC.

    Anyone has any ideas. ? -Thanks!

    Hi Ichabod22:

    Thanks for your comments, and happy this worked.  I did have the chance to try this workaround yet - my phase "check for updates..." ran for 4 hours during my may 2016 updated Patch Tuesday before we found 16 available updates - but quite a few users of Win 7 SP1 and SP2 of Vista are now reporting that before installing these updates Windows kernel mode driver (Win32k.sys) each month (for example the KB3145739 in April 2016; KB3153199 in may 2016) reduced their updates for Patch Tuesday to hours to minutes.

    I doubt that this is a permanent solution so be sure to check the page Web of Dalai Search for Windows Updates takes forever?-a possible solution next month to see if a new version of Win32k.sys is available for download from the Microsoft Download Center before your race updates your June 2016 Patch Tuesday.

    Woody Leonhard has published a series of articles on of temporary workaround in his Woody on Windows blog, including Windows 7 update scans still holding? KB 3153199 can solve the problem, so congratulations to Woody, Dalai and others to share this potential solution.

    ------------
    32 bit Vista Home Premium SP2 * Firefox v46.0.1 * IE9 * NIS v21.7.0.11
    HP Pavilion dv6835ca Intel Core2Duo T5550 1.83 GHz, 3 GB RAM, NVIDIA GeForce 8400 M GS

  • Windows 7 impossible to check updates, keep looking for updates and never stops.

    Original title: update Windows 7

    I recently got rid of a shit 10 windows and reinstalled windows 7 but I can't do updates. It keeps searching for updates and never stops. That is what it is?

    You could look at this and Yes, it has become current,

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-remains-at-checking-for-updates/ff3c442e-79a6-40d3-AC35-29e130cebef1

  • My Windows Vist shows error 8024402f update code, impossible to update windows. Help, please.

    My Windows Vist shows error 8024402f update code, impossible to update windows. Help, please.

    Hi you can try the following...

    Click on Start >
    Type in CMD > 
    Right-click on the result, and then click on run as administrator >
    Then type sfc/scannow , and then press ENTER.
    Reboot your PC and try it a few times.

    Download and install the update tool of the system for Vista (Windows Update hotfix)
    "This tool is being offered because an inconsistency was found in the maintenance shop windows which can prevent the installation of future updates and service packs software."

    Microsoft technical support suggestions:

    Configure the connection to obtain an IP address automatically

    1. Click on «Start», enter "NCPA. CPL"(without quotes) in the search bar and press"Enter. "
    2. Right-click on the network connection, and then click "Properties". If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    3. Click Select "IP Version 6 (TCP/IPv6)" and then click "Properties".
    4. Check "obtain an IP address automatically" and "Obtain DNS server address automatically".
    5. Click on 'OK '.
    6. Click Select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.
    7. Check "obtain an IP address automatically" and "Obtain DNS server address automatically".
    8. Click on 'OK '.
    9. Restart the computer.

  • Windows Vista failed to check the updates, error 80070490, did he ran but the problem persists

    KB2679255 & KB2676562 installation problems. Look for day, but Windows Vista Impossible answer updates check updates, error code 80070490. Other updates to Windows Installer. Ran he made but problems persists.

    http://Windows.Microsoft.com/en-GB/Windows-Vista/Windows-Update-error-80070490

    Windows Update error 80070490

  • Impossible to solve the problem of Windows Vista Service Pack 2 update! (error code 80073712)

    original title: could not resolve the problem of Windows Vista Service Pack 2 update!

    Hey there,

    I got Windows Vista Home Premium Service Pack 1 in my laptop when I bought it. Recently there was no updates of security (e.g., KB2481109) to install it into my system with a error: 80073712 and I had received a notification from windows to install Windows Vista Service Pack 2update. I tried to install it from windows update, but I got the error: 8024200d. I read the solution on this site and followed by download the stand-alone file and install "System Update Readiness Tool" (KB947821). ". After that I downloaded the standalone version "Windows Vista Service Pack 2" (KB948465) and tried to install it, but I got the error: 800f081f. "» I did Scan SFC which there is "no question of integrity" in the system, uninstalled "Avira Antivirus software" and again tried to install Service Pack 2 , but again, I've got the error: 80073712 After all this I couldn't solve the problem. Please provide some tips if anyone has solved the same or has a solution!

    Thank you very much

    UD

    Hi Electrocuteud,

    You have access to a Windows Vista installation disc? If so, follow the steps in this document to perform an InPlace upgrade. This will reinstall Vista without making any changes to the files and programs on the computer. Even if your data and programs must be safe, it is always advisable to make sure that you have a recent backup before major changes on the computer.

  • Windows Vista cannot complete the update of windows since July 2016

    Windows Vista cannot complete the update of windows

    Since the last update July 2016

    no error message, just perpetually "check updates".

    everything I start the update of windows

    help please

    Hi emiquestion:

    Long 'check for updates...' crashes and slow window updates are a currently a problem common to many users of Vista SP2 - please see the workaround suggested, I posted yesterday over BluesBlaster WINDOWS VISTA 32-BIT updates.

    Note that it is a temporary workaround and updates slow Windows will probably return each Patch Tuesday (the second Tuesday of the month) after Microsoft also releases a new batch of updates to security for Vista SP2 and IE9.  Since September 2016 Patch Tuesday updates are published tomorrow (13-Sep-2016), it would be wise to wait a day or two to execute step-by-step instructions posted on June 16, 2016, in m #l's thread of updates does not, he has been looking for updates for hours and save yourself a bit of extra work this month.  Dalai normally updates its list of Windows kernel mode driver (Win32K.sys) implemented to date required the same evening that the Patch Tuesday, updates are published by Microsoftto the http://wu.krelay.de/en/ .
    ------------
    32 bit Vista Home Premium SP2 * Firefox v48.0.2 * NIS v22.7.1.32 * MMFA Premium v2.2.1
    HP Pavilion dv6835ca Intel Core2Duo T5550 1.83 GHz, 3 GB RAM, NVIDIA GeForce 8400 M GS

  • Windows vista is 63 92 updated installation and after running for seven hours must be stuck in a loop. How to regain control of my everex computer

    Windows vista is 63 92 updated installation and after running for seven hours must be stuck in a loop. How to regain control of my everex computer

    Hello

    1. have there been recent changes to the system before the show?

    2 is the issue limited to the installation of Windows updates?

    3. do you have security software installed on your system?

    Method:

    Follow the indicated link and perform the steps and check if it helps fix the problem.

    Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

    http://support.Microsoft.com/kb/949358

    Note: It is strongly recommended that you back up all your personal files. For more information about how to back up your files, please visit: http://windows.microsoft.com/en-US/windows7/Back-up-your-files

    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    http://support.Microsoft.com/kb/322756

    Let us know if it helps.

  • I can not open hotmail attachments (updated Automatic Windows Vista, IE8, activated and updated running).

    I have a new HP computer and I can not open hotmail attachments (updated Automatic Windows Vista, IE8, activated and updated running).  When you try to open an attachment, the bar downstairs quickly moves to the right, but never appears a dialog box asking if you want to open or save the file.  Error message I get when I try to resolve it with the suggested steps indicates "module"wintrust.dll"was loaded but the call to DllRegisterServer failed with error code 0x80070005.  I tried to do the same command prompt, but still not received the same error.  Thanks for help anything.

    Hi Paul,.

    Have you tried to download an attachment after you turn off your antivirus?
    I had a problem in the past where the system was performed at Trend Micro Internet Security and Web content filtering (I think that's what it was called) was preventing attachments from download.
    I would like to know what are your results!

    Cody C
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • The window Vista, SP2 'Impossible to check updates' error 800F080D

    I tried all the suggestions on this forum, as well as what I can find online, without a solution.  I use Panda Security, however, I uninstalled it and the problem remains.   I have tried the repair on the original CD, ran Fixit and a number of other solutions.  I just reformat the drive and start over, but don't have my original CD for MS Office and cannot afford to lose.  Any suggestions would be greatly appreciated.

    Windows Vista Business

    SP2

    As I tried to reset the software update I lost the history of updates are on this machine.  The last update 01/02/2013.  So this should give an idea where is the operating system.

    I ran sfc/scannow as stated in my previous post and found a file, he could not set:

    2013-03-03 11:26:35, 000001fd CSI Info [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:22{11}]"Autochk.exe '; source file in the store is also corrupted

    As the job file and the source are corrupt, where can I get a version uncorrupted "autochk.exe" and how do I go about replacing it?

    Under Vista SP2 Professional.

    Thanks, Lester

    Hi Retselyaj,

    I would have you to consult these links:

    Note: I suggest you back up the data before you perform the steps in the link.

    You cannot select the upgrade option when you try to install Windows Vista, and you receive the following message: "upgrade has been disabled".

    http://support.Microsoft.com/kb/926069

    Error message when you try to install Windows Vista by using Windows Vista installation media: "upgrade has been disabled - put level, start the installation of Windows.

    http://support.Microsoft.com/kb/932009

    I hope this helps. Let me know if you need help with this problem.

  • my Windows Update does not - impossible to check updates

    original title: my Windows Update does not work.

    I have windows vista service pack 2. My Windows Update does not work. When I try to use it, I get the following message:
    "The Windows Update cannot currently check for updates because the service is not running." You may have to restart your computer. »

    I restarted my computer several times with no response

    Hello

    1. you remember to make changes to your computer before the problem?

    I wish that you follow these steps.

    Step 1:

    Components resetting Windows Update and see if that fixes the problem.

    Step 2:

    Try to install the updates in a clean boot State.

    Note: Follow step 7 to your computer as usual.

  • Windows Vista, impossible to update, get 8007007e error code

    Whenever I try to update it says "Windows could not search for new updates"
    Code 8007007e Windows update encountered an unknown error.
    I don't know what to do.

    Yes, the trial version free [McAfee] [before] expired I installed the Avast.
    Yes, the problem started after that I installed the Vista SP2, but I'm not sure if I was still running McAfee, McAfee I think but not sure.

    Well, I'll point you to the support options of Vista SP2-related, but since you were executed without a fully functional, fully updated antivirus application for who-knows-how-long, I think you are looking for to format your HARD drive and do a clean install of Vista it. If you please note that a repair installation (AKA In - Place Upgrade) will not fix it.

    Free unlimited installation and compatibility support is available for Windows Vista SP2 questions until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack <=you'd want="" this=""> ). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Problems installing updates windows Vista home 32-bit updates

    Hi, I have several times been impossible to install updates windows update tells me that I need for my computer.
    I have changed the settings from automatic to manual and vice versa and download updates, but are not installed.
    I am never given the opportunity to accept the license agreement.
    Some updates have not been installed.
    8007010B error code
    code 643
    I can't know what code 643 is.
    This has happened for months.
    Can what's up, anyone help?

    Thank you

    Hi zsaire,

    Let us know the updates that need to be download.

    First go through all the steps and then start troubleshooting.

    Step 1: Check if Windows update-related services are set to automatic and started.

    Click Start, type services.msc in the start search box, right-click to services.msc, and then click Run as administrator.

    Check the above services below:
    (a) Background Intelligent Transfer Service
    (b) cryptographic service
    (c) Windows Update

    Step 2: Rename the Catroot2 folder

    To rename the Catroot2 folder, follow these steps:

    1. Click Start, type cmd in the search box and right-click on cmd.exe, and then click Run as administrator.
    2. at the command prompt, type the following commands and press ENTER after each line:

    net stop cryptsvc
    Ren %systemroot%\System32\Catroot2 oldcatroot2
    net start cryptsvc
    output

    3 remove all tmp*.cat to the following folder:

    % systemroot%\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}

    If any of the files that begin with tmp exist in this folder, do not remove any other files. Files .cat in this folder are necessary for installing hotfixes and service packs.

    Important: Do not rename the folder C:\windows\system32\catroot. The Catroot2 folder is automatically recreated by Windows, but the C:\windows\system32\catroot folder is not recreated if is renamed the folder C:\windows\system32\catroot.

    Step 3: Reregister DLL files that are associated with Cryptographic Services

    To register .dll files that are associated with Cryptographic Services, follow these steps:

    1. Click Start, type cmd in the search box and right-click on cmd.exe, and then click Run as administrator.

    2. at the command prompt, type the following commands and press ENTER after each command:

    regsvr32 /u softpub.dll
    regsvr32 /u wintrust.dll
    regsvr32 /u initpki.dll
    regsvr32 /u dssenh.dll
    regsvr32 /u rsaenh.dll
    regsvr32 /u gpkcsp.dll
    regsvr32 /u sccbase.dll
    regsvr32 /u slbcsp.dll
    regsvr32 /u mssip32.dll
    regsvr32 /u cryptdlg.dll

    regsvr32 softpub.dll
    regsvr32 wintrust.dll
    regsvr32 initpki.dll
    regsvr32 dssenh.dll
    regsvr32 rsaenh.dll
    regsvr32 gpkcsp.dll
    regsvr32 sccbase.dll
    regsvr32 slbcsp.dll
    regsvr32 mssip32.dll
    regsvr32 cryptdlg.dll
    output

    Note: Click OK if prompted.

    Restart the computer.

    Step 4: Empty the software distribution folder

    1. Click Start, type services.msc in the search box, click services.msc, and then click Run as administrator.
    2. in the Services (Local) pane, click Automatic updates and then click on stop.
    3. reduce the Services (local) window.
    4. Select all the contents of the Windows distribution folder, and then delete them.

    Note: by default, the Windows distribution folder is located in the drive: \Windows\SoftwareDistribution folder. At this location, the drive is a placeholder for the drive where Windows is installed.
    5. make sure that the Windows distribution folder is empty, and then enlarge the Services (local) window.
    6. in the Services (Local) pane, click Automatic updates, and then click Start.
    7 restart the computer, and then run Windows Update again.

    Article number: http://support.microsoft.com/default.aspx/kb/822798

    Step 5: Disable the security software

    Step 6: Scan Run SFC
    Please follow the steps below to the auditor of the filesystem as the first steps:

    1. Click Start and type cmd in the box start the search.
    2. in the area of results, right-click cmd.exe, and then click Run as administrator. You will be asked to type the password for an administrator account. If you are the administrator or type the administrator password, click on continue. Then click on continue.
    3. at the command prompt, type Sfc/scannow, and then press ENTER.

    Note: The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista CD.

    ================================================================================

    If there are Microsoft .NET Framework listed updates to be installed, follow the steps mentioned in the article:
    When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
    http://support.Microsoft.com/kb/923100

    Thank you and best regards,
    Abdelouahab Microsoft responds to the technical support engineer

  • Cannot open the com files and executable file in the Original Windows Vista Software activated after updates to the registry and cleaning, error message and all the setup.exe files has been disabled, why?

    I use Vista Ultimate SP2 preloaded o/s and windows is activated with a genuine problems with executable files with product of what ID 89580-OEM-7332132-00031 on PC, the problem happens when I'm uninstalling some registry tools, the error message I got was 'impossible to connect to the microsoft client group policy server' and whenever I try to run the executable file .exe or .com I get error messages "the windows don't. not find the environment option that was entered path c:\windows\system32\msconfig.exe for example. What is your solution if all the drivers I downloaded from microsoft Update site and support Web is unexecutable because of registry files missing that causes all the executable files and com files to display error messages when clicked. What was missing in the original windows registry files after running the tool registry optimizer? What was missing in my windows vista original? Need help 4th level or windows file recovery software onwer.

    I was able to surf the internet, able to do facebooking, capable of voip webcam and chat however installation and admin work on operating system software has been disabled due to lack of the registry files all the executable files was disabled after a registry cleaning registry optimizer and all the setup.exe has been disabled when I run saying them I don't have permission to run setup.exe because I like not connected to the microsoft Group Policy Server, but it is an original windows software, I can download files from the microsoft Web site and save on my drive hard but cannot run the executable installation files, which was lacking in system files that stopped all the executable files to run, except the internet broadband. Need help 4th level or windows file recovery software onwer

    Hello

    Method 1:

    I suggest you to do a scan of the SFC. File system (CFS) Auditor verifies that all Windows 7 system files are where they should be as they are by default and not corrupted, changed or damaged.

    a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.

    b. click on continue or provide administrator credentials if prompted.

    c. in the type in the following command prompt window and press ENTER:

    d. sfc/scannow

    e. you should see the following message on the screen:

    § Begin the analysis of the system. This process will take time.

    § Beginning verification phase of system scan.

    f. % verification complete.

    g. once the scan is complete, a test to see if the problem you are experiencing is resolved or not.

    For more information, see the article mentioned below.

    http://support.Microsoft.com/kb/929833

    Method 2:

    Create a new account user has administrator rights and check if you are able to install applications or not. Follow the steps mentioned in the article below.

    Create a user account

    http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

    Method 3:

    I suggest you do a system restore and check. See the article mentioned below

    System Restore: frequently asked questions.

    http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

    What is system restore?

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

    Thanks and regards.

    Thahaseena M
    Microsoft Answers Support Engineer.
    Visit ourMicrosoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • Bing always happens when I open a new tab! Help!

    It's always the tab that is displayed. http://www.bing.com/?babsrc=NT_ofln & mntrId = 4C19001D09981F0E & cat = Delta & dlb = 1 & Mntrid = 123713 & TSP = 5097I already deleted it as a search engine, but it still looks. Help, please!

  • How can I keep a wrong user name to come up with a click on the box?

    I typed an incorrect username. Now, when I click on the user name box to display my username, it displays the wrong name as a choice, but I don't want to show. Is it possible to remove this name?

  • D20 - without with Xeon processor Hyperthreading?

    Hallo, Since a few days I very happily use my new thinkstation D20 with a CPU Xeon 5506. However, when I start the Task Manager in Vista or Server 2008 I see always 4 processors. But I expect to see 8 processors using this processor Hyperthreading. Q

  • Windows Update installed even updated 9 times...

    the one who caused all the questions, this month. I can't see my update history, not the update actually work now, gives me the same error over and over again. Tried the Mr.Fixit... no good, sent in the request response support live. Research various

  • Get the 229771 error code

    I just downloaded NIDAQ902f0.exe and installed.  MAX indicates the version 4.6.1f0. With the help of MAX I have a NI PCI-6731 device with 4 analog output ports (Dev1 ao0-Dev1 ao3). When I start my program and try to create a writing task: Ask the NID