Windows Vista install the new WD hard drive empty - does not not :(

Similar Questions

• Windows Vista - after the RESTORE partition HARD drive: WINDOWS COULD NOT COMPLETE the INSTALLATION. TO INSTALL WINDOWS ON THIS COMPUTER, RESTART THE INSTALLATION

  Hello

  I have WINDOWS VISTA and just tried to reinstall my laptop of restoration on a HARD disk partition.

  The restore went through, but then I got the error: WINDOWS COULD NOT COMPLETE the INSTALLATION. TO INSTALL WINDOWS ON THIS COMPUTER, RESTART THE INSTALLATION

  When I press 'OK' (which is the only option), it tries to start again, until I get the same error through the black screen.

  How can I get out of this loop please?

  Thank you.

  Lucie

  Hello

  For any problem with the help of the recovery Partition that has been copied to the hard disk by the computer manufacturer, you must contact them.

  This recovery process is the manufacturer, not Microsoft.

  ________________________________________________

  You never told us why you wanted to do a restore. If you had serious errors and the recovery process does not work, you will have hardware problems. BUT we're only guessing at this stage due to lack of information to help you.

  See you soon.

• Desktop HP Pavilion p6130y PC, installation of Windows 7 on the new SATA hard drive problem

  First of all, I can't find the model p6130y number on the HP Support.  The original hard drive came out and it was replaced with a Seagate SATA 850 GB drive, buy Windows 7 on DVD and I tried to install. Obtained through formatting the drive. Their only option now is to "Load a driver."  He says that I need to locate the HD driver on the media and press OK.  I can't find such an on installation disk so will try the find the right HD drivers for this model computer download on a USB key. Any ideas?

  Hello:

  Here is the link for the driver sata for your model:

  Just download it and do not run it.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=PV-77141-1&cc=us&DLC=en&LC=en&OS=4063&product=3980095&sw_lang=

  The motherboard in your model has major problems with the drives out and that the results in the hard drive and DVD drive from the BIOS endangered.

  It could happen to your model, it's why W7 cannot find the hard drive.

  You will need to download and install this free program.

  http://7-zip.org/

  After installing 7 - Zip, right-click on the Sata driver you downloaded and select 7 - zip option in the list.

  Select extract to: I leave extract the name of the file and extract the exe file in a folder of driver.

  Once you have the file, open it and copy the contents of the folder on a drive portable usb flash without the src folder.

  With the flash player and the installation of W7 media connected to the computer, boot from the installation of W7 media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and hopefully, W7 should install correctly.

• install the new laptop Hard Drive

  Hello LR Adobe Support.

  I have 5 LR installed on two computers one single office, another laptop. Hard drive portable c when the bad my Builder said I had a connection problem crossed that my programs would not start all the time. Anyway I did install a new SS drive can I install on my new HD LR? I have the drive both of the copies I own with serial numbers.

  Thanks for your help

  Barry

  First of all, it is an open forum, not Adobe support... so MOST of the answers here are other users (and, the LR5 is an old version, so I don't think that Adobe provides support)

  When you have a non-functional computer and cannot turn it off, click on the link below

  Serial number and activation support (no-Cloud) https://forums.adobe.com/thread/2041990 to adjust the number of activations

  You install programs exactly in the same way you did the 1st time... Put your disc in the drive, and enter your serial number when asked

• Laptop bought with windows vista installed, the hard drive was completely cleaned and windows 7 installed, I have to uninstall it and install a genuine windows xp pro - how do this please.

  Laptop bought with windows vista installed, the hard drive was completely cleaned and windows 7 installed, I have to uninstall it and install a genuine windows xp pro - how do this please.

  On Sunday July 25, 2010 10:11:30 + 0000, pc_novice wrote:

  Hi Gordon

  I just downloaded drivers from the Dell website in support of xp

  I have tried to reboot from the XP cd but got the following message when I tried to install

  "This program is blocked due to compatibility issues"

  Program - the installer of Windows

  Editor - Microsoft

  Location: D:\1386\winnt32.exe

  Setup cannot continue because the version of Windows on your computer is newer than the version on the cd. If you decide to remove the version latest Windows that is currently installed the files and settings cannot be recovered"

  I don't want Windows 7 at all so I'm ready to lose all data, so how can I do to remove it?

  You say that you have started from the XP CD, but something is wrong with that
  you do. Just boot from the CD and follow the prompts for a
  clean install. A new installation by formatting the
  drive and does not care what version of Windows is installed (or
  even if any version of Windows is installed.

  Ken Blake

• After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer

  After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer. Also I can't 'manage' my computer because I do not have "permissions". I tried a fix he 45071 and it did nothing.

  Applications, (Norton and McAfee) (including free evaluation versions are notorious for not not upgrade (or uninstalling) itself.) If NIS has been installed for 3 years, you have NIS update at least once and maybe twice (e.g., NIS 2009 > NIS 2010 > NIS 2011).

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) viaControl Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of NIS 2011 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  9. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run that set it by DEFAULT and modes and AGGRESSIVE. [1]

  10. restart once again & test.

  NB: Installation KB971029 disables AutoRun/autoplay on USB connected but not 'brilliant media' external drives (i.e., CDs & DVDs). See http://blogs.technet.com/b/msrc/archive/2011/02/08/deeper-insight-into-the-security-advisory-967940-update.aspx

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

  never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Vista security alert sending indicating virus attack and does not allow me to get security alerts. How to bypass or disable?

  Windows Vista security alert sending indicating virus attack and does not allow me to get security alerts.  How to bypass or disable?  I have another anti-spyware (Kapersky) program that manages all aspects and indicates no virus found.

  I want to disable Vista, but it won't let me and the only solution it says is to download a update for a cost.  Help, please.

  The 'alert' is not from Vista. Your computer is infected by a rogue security program. It's called "thugs" because he pretended to be a good guy but is really bad. Don't pay them!

  Bleeping Computer has the removal of many variants of thieves here steps - http://www.bleepingcomputer.com/virus-removal/remove-antivirus-vista-2010
  You can also check for the stages of removal at these links:

  Bleeping computer removal how - to - http://www.bleepingcomputer.com/forums/forum55.html
  Malwarebytes malware removal guide - http://tinyurl.com/5xrpft

  Malwarebytes' Anti-malware (MBAM) or SuperAntiSpyware will often do the job. Both have free versions and you don't need to buy these programs.

  These can work for you, and all can be good. However, in many cases the computer will also infected with other horses of Trojan and protected by a rootkit. These machines are extremely difficult to clean. If your machine is one of these cases, either the interactive assistance to one of the specialty forums listed in the link below, OR take your machine to a professional on the local computer OR backup your data and do a clean install of Windows. It's your choice. I do not recommend using BigComputerStore/GeekSquad types of places.

  http://www.elephantboycomputers.com/page2.html#HJT-links MS - MVP - Elephant Boy computers - don't panic!

• error message indicates that the new 450 turbo label printer does not support the type of paper 119

  error message indicates that the new 450 turbo label printer does not support the type of paper 119

  Contact the society of the printer.  There is nothing that Microsoft or Windows, can do to force the printer to accept a type of paper, though it says it will not accept it.

• A Dell PowerEdge 2850 server is used for the new ESXi server, but it does not support the 64-bit VM.

  A Dell PowerEdge 2850 server is used for the new ESXi server, but it does not support the 64-bit VM.

  I can't believe it.

  When I start up a virtual computer, it gives a wrong message shown in the picture below.

  Does anyone have any ideas on this?

  Usually not enabled virtualization technology in host BIOS.

  Take a look at can not power on a 64-bit Windows VM

• Buy the new internal hard drive

  I have HP Pavilion dv4-1242TX

  Recently, my original 320 GB (Western Digital Scorpio Blue - WD3200BPVT) internal hard drive crashed and become inadmissible.

  So now I want to buy a new 500 GB internal hard drive, but I'm confused if my laptop it will support or not.

  Internal hard drive WD Blue 500 GB laptop computer (WD5000BPVT / WD5000LPVX)

  MAIN FEATURES

  Other than the size, I see no difference between the two discs.  Just having the Recovery DVD set available and install the new drive, run the set of recovery and off you go.  If the old drive is toast, there's nothing else to do than to run the updates from Microsoft.

  Or install Windows 7, commercial version of your choice.

• Installation of Windows vista can't find my hard drive

  Hello, I have a HP Pavilion a6709sc and some problem with install vista.

  I changed the hard drive to a 500 GB Seagate Barracuda 7200 RPM SATA 6Gbit/s because the other crasched, but now when Im trying to reinstall vista they cant find my hard drive as an option to install vista on it.

  What should I do? I think it's something with the sata controller drivers but don't know how to install them in the meny facilities.

  Can someone please help as quickly a possible really need the computer now.

  Sorry for my English but I'm from Sweden hehe.

  Thank you for me.

  I have set right now in a different way but thanks for the replies.

• Reformat the new portable hard drive

  How can I reformat a new portable hard drive MAC formatted to work with Windows XP?

  Hi cb258,

  You can try to format external driver and check if it helps. Inorder to do this seam the steps:

  Sign in as an administrator or as a member of the Administrators group.

  a. Click Start and then click Control Panel.

  b. click on performance and Maintenance, click Administrative Tools and then double-click computer management. In the console tree, click Disk Management.

  NOTE: You can also click Start, point to run, type diskmgmt.msc, and then click OK.

  c. in disk management, click on the external drive you want to format (or reformat), and then click on format.

  You can see the following article for more information:

  How to use disk management to configure basic disks in Windows XP

  http://support.Microsoft.com/kb/309000

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Satellite Pro M30, it is recommended to install the new nVIDIA display driver?

  I own a laptop Satellite Pro M30, which includes a GeForce FX Go5200 GPU from nVIDIA. On 27 July, nVIDIA has released a new driver and related software (version 61.77), as indicated by nVIDIA, fits all the its GPU.

  I tried to install this new driver on my laptop (after removing the old driver following the instructions by nVIDIA) but it does not install. Does anyone have an idea why?

  Why the new driver is not displayed on the Toshiba support site driver for this laptop?

  Hello

  All drivers are designed and tested to laptops and Tom is right about producer for laptop. This means that you can find the download page for all drivers needed on Toshiba.

  As much I know Toshiba supports the drivers shipped with the device drivers and updates if necessary.

• Satellite L50 - A-1 DG - with the new SSD HARD drive replacement

  Satellite L50 - A - 1 DG

  I would put my SSD in the PC and install win7 on it. But it does not work.

  I try to put the SSD into the DVD rom adapter. It can not been recognized in the bios.

  I tried to replace the SSD hard drive. Then the pc cannot start up. And I can't get into the bios or adjustment.

  Someone knows what's the problem?

  > I try to put the SSD into the DVD rom adapter. It can not been recognized in the bios.

  This does not work with all models of laptops.
  As far as I know that the laptop must support Slim Select Bay and the BIOS should also support this hardware option. But in your case, it doesn t.

  One possible solution is the use of SOLID-STATE drive instead of the HARD disk.

  You said that you are not able to access the BIOS after these updates.
  Well, before you do this (a SSD drive connection) you should access the BIOS and must disable secure boot and must set the start mode MSC mode.

  The comments appreciated.